Tenshock motors for competition of boat racing. Tenshock 4 Pole Brushless Motor Viper 1540 Features 1.CNC machined AL casing 2.Efficiency 4-Pole 6 Slots brushless motor 3.High purity copper windings making maximizes conductivity 4.Powerful sintered neodymium magnet 5.High torque and light weight 6.Swallow tail rotor 7.High grade bearing Details  Poles: 4 Diameter: 29mm   Length: 58mm ØShaft: 4mm Length shaft: 14mm  Weight: 180 g Max. RPM: 65.000 Max. temp: 180 °C  Timing: 8-10 Mounting hole distance: 19mm

Our most successful for today boat is available in very limited quantities. Many time, this hull in full, 6 participants race, have 50+ laps results . Colors of hull: red, yellow, white, green. Complete of delivery: Was glued: * Rudder holder, rudder, wish all needed parts.  * Servo mounting. (for servo TYP Hitec 81)  * Motor mount for 28/29 mm motor diameter. * Shaft line with 1,5 mm shaft. * Have propeller shaft of the wire 1,5 mm, with adapter M4/3mmDD for screwing propeller. Coupling 1.50 x 4.00 mm. for connecting motor shaft and propeller shaft - complete. * Shortstop power circuits (emergency stop) - the requirement of the rules. * Paste the power wires from the emergency switch on the controller and battery. * Installed ingouing and utgouing wayer pipes, for motor/esc watercooling. * In hull, cut hole for intake and outgoing of water, for hull coup system.   You need to install: * Propeller * Servo for rudder * Motor Controller

First, fully selfmade MONO1 from Ecomaster. We tested this hull all season... Results? 30+.....   Dimensions: 650×185 mm Material of hull: carbon kevlar. Colours of hull: white, green, yellow, white. Full carbon version is possible. And there's combinations (+20€). Please, make your choice on option.   Complete of delivery: hull with glued float chamber. assembling dimensions.

Fully sharped and precision dynamic balanced. For ECO boats. Parts for assembled of rc model boat.

Electric motor Tenshock for your Winn! Tenshock CZII 2250   Today, this is the top of the creative thought of the chinese motor builders! The most advanced technology in the threephase motor building embodied in this motor! Japanese iron for the stator, the most powerful magnet of neodymium / iron / boron alloy. And besides, the temperature is also very resistant - up to 180 Degrees! Precision balancing of rotor, and japanese ball bearings ...   What else to say. Put in the boat and win !!!   Universal threephase AC motor, for a variety of applications in modeling and not only. A very wide range of motor, revolutions ensures that you can choose for yourself the engine that you need here and now! The motor is made in a six pole version. This means that its efficiency is increased in comparison with two pole motors by 2-3%. Due to the quality materials, and 12 slots in stator, used in the design of the motor - it has an advantage in efficiency over the Viper motor series - by 3-5%. And for sports, you understand how important this is! Flexible power wires are outgoing from the back cover for convenient connection of the motor to controller. Characteristics  Tenshock CZ II 2250 Number of rotor poles: 6. Motor body length: 70 mm Body diameter 38 mm Shaft diameter: 5×17 mm. Motor weight: 370 grams. Type of rotor magnets: neodymium / iron / boron 180° Maximum motor power: 3550 Watt. Recommended timing controller 7°-15° Assembly fittings with 6 × M3 thread.

New version, ECO expert, from Ecomaster. Boat that goes directly *from the table*   Over the past two racing seasons, we have found the ideal position inserts all internally in the boat. Motorholder, propeller shaft line, steering ruder . This is essential for fast and high-quality drive this boat. Win Poland Tenshock Cup2016 in class ECO Expert. Win Baltic Cup 2016 in class ECO Expert. Win Swiss Cup 2017 in class ECO Expert. Win Belgian Cup 2017 in class ECO Expert. Win Spain championship 2017 in class ECO Expert Win Ukrainian Championship 2017 in class ECO Expert. Win Ecomaster Cup 2017 in class ECO Expert. Win Swiss Cup 2018 in class ECO Expert. Win Ukrainian Championship 2018 in class ECO Expert. Win Ecomaster Cup 2018 in class ECO Expert. Win Swiss Cup 2019 in class ECO Expert. Win Ukrainian Championship 2019 in class ECO Expert. Win Ecomaster Cup 2019 in class ECO Expert.   * Bottom of the boat is made from carbon kevlaf fiber - for greater strength of hull. * Boat glued to the inside of all the necessary installation electronics.   Compelct of delivery:   Was glued: * Steering column has ruder and all co-parts. * Mounting servos * Motorholder * Propeller shaft line. * Have the propeller shaft of the wire 2 mm, with the adapter under 3 mm, for mounting the propeller. * Coupling 2.00 x 4.00 mm. for connecting the motor shaft and propeller shaft - in complect. * Shortstop power circuits (emergency stop) - the requirement of the rules. * Paste the power wires from the emergency switch on the controller and the battery. * Set the suction hose and tubes for water cooling of motor and ESC. * In hull, cut holes for the intake and take out of water in case of hull revolution.   In boat installed:   * Brushless electric motor Tenshock Viper 1530 3100KV wish wathercooling, coupling connecting it to the propeller shaft. * Sharpened and precision balanced propeller for this boat. From stainless steel. 30 mm diameter. * Electric speed controller ZTW 80A,wish wathercooling, and fully water protection. * Servo Corona 268. Metal gear. * LiPo Battery for limiter: 3S1P 5800 mAh And yet ... In the battle ....   Boat is almost no need to set up on the water ..

Full complet of competition level race boat  HYDRO  1 class. Complet: Hull: TYP Exe 2,5 Carbon/kevlar fiber. Motor: Tenshock Viper 1530/8/3480KV with Tenshock watercooling. ESC: 100A watercooling, and full waterproofing. LiPo: 3S1P 5800 mAh Limiter pack. Servo: 30×15×30 metal gear, BB. Prop: Tenshock CNC 36 mm, 2 Blades.   Full assembled and ready to go complet

Set of parts, for rc racing boats.

On it, I won everything that could be won. Boat length 570 mm. Hull, with pasted partition. The whole central part of the bottom is lined with carbon fir boats for armor-piercing! Hull weight 178 - 185 grams. Ecomaster Cup 2013 - 2nd place in the class ECO standard.  Ukrainian Championship 2011 ECO Standard. Ukrainian Championship 2007 ECO Standard, Expert, Team.  Belarus Championships 2007 ECO standard. Russian Championship 2007 in ECO Standard, Expert. This hull - our "attack aircraft carrier" ... :)

Boat that goes directly *from the table* How come? Over the past three racing seasons, we have found the ideal position inserts all internally in the boat. Motorholder, propeller shaft line, steering ruder . This is essential for fast and high-quality drive this boat. Win Russian championship 2008, 2009, 2010, 2012, 2013 in class ECO expert Win Ukraine championship in 2008 and 2009 in classes ECO expert, ECO standard, ECO team. Win Spain championship in 2009 and 2010 class ECO expert. Win Poland championship in 2011 in class ECO Expert. Win World championship in 2015 in the class of standard ECO juniors. Win Russian Cup in 2015 in class ECO Expert. 49 laps! * Bottom of the boat is made of cloth carbon - for greater strength of the hull. * Boat glued to the inside of all the necessary installation elektroniks.   Komplet of delivery:   Was glued: * Steering column has ruder and all co-parts. * Mounting servo. * Motorholder * Propeller shaft line. * Have the propeller shaft of the wire 2 mm, with the adapter under 3 mm, for mounting propeller. * Coupling 2.00 x 4.00 mm. for connecting the motor shaft and propeller shaft - in complect. * Shortstop power circuits (emergency stop) - the requirement of the rules. * Power wires from the emergency switch on the controller and the battery. * Set the suction hose and tube water discharge, water cooling of the motor. * In hull, cutting holes, for intake and discharge of water, for hull revolution to bottom under.   In boat is installed:   * Brushless electric motor Tenshock Viper 1530 3480KV wish wathercooling, coupling connecting it to the propeller shaft. * Sharpened and balanced propeller for this boat. From stainless steel. * Electric speed controller from ZTW 80A, wish wathercooling, and FULL waterproofing. * Servo Corona 238 with metal gear and ball bearing. * LiPo Battery 3S1P 5800 mAh for limiter race. Available hull colours: Green, Yellow, Red, White. Choice please in "Options". And yet ... In the battle ....   Boat is almost no need to set up on the water ...

ARTR MINI MONO BOAT Size of hull: 450*135mm Installed in boat: -Watercooled system for motor and ESC. -Brushless 4 Pole Motor VZ1515/4000KV -Brushless Waterproof ESC 40A -Servo -Urgency Switch  -Number Holder -Two plastick Props 30mm diam. -All other parts assembled   Feature:   -ARTR (Almost Ready To Run)  -For control using 2 chanel remote control radio -RC functions: 1. ruder chanel: right/left   2. forward/stop with proportional control -With 1 brushless electric motor   -Model is ready for operation once the receiver have been installed    -Material: Glass Firber/Carbon Firber/Kelvar. PLEASE make your choise in "Option". -Hull color: Glass fiber boats: White/Racing Red/Yellow Carbon fiber: black carbon color: White/Racing Red/Yellow Kevlar carbon fiber: black/yellow fiber color: White/Racing Red/Yellow -In ARTA (Almost Readu To Assembled) version: You will have glass fiber, or carbon fiber, or kevlar/carbon fiber, (choice your wishes, in Options) painted, with installed fully glued parts, inside hull. All electrick parts, you must self installed, on your boat. All electric parts, in complet. -Watercooled system for motor and ESC. -Brushless 4 Pole Motor VZ1515/4000 KV -Brushless Waterproof ESC 40A -Servo -Urgency Switch  -Number Holder -Two plastick Props -All other parts for assembled.   Please, make your choise!

NEW BX150 PRO BRUSHLESS ELECTRONIC CONTROLLER Feature: 1. Almost perfect linear control, let you stand out in the competition. 2. Fully filled with glue, with protection grade of IP67. 3. BEC output voltage three speed regulation (6V / 7.2V / 8.4v) 4. Follow up firmware upgrade and develop more function settings. 5.Support tenshcok-link, review data logger and analyze usage.

MINI HYDRO, became under the control of Rafael fon Chizhevsky, the world champion at the World Championship 2013. Very easy to set up (according to author) ... Specifications: Hull length 440 mm Float length 230 mm Comlect of delivery: 1. Hull is made of glass (if you want to gain hull with carbon fiber - I ask you to select it at the top of this page, under *Options*)  2. Two float.

Длина корпуса мотра: 30 mm Диаметр корпуса 28 мм Диаметр вала: 4 mm. Вес мотора: 83 грамма. Тип магнитов ротора: неодим/железо/бор 150о Максимальная мощность мотора: 500 Watt Четыре посадочных отверствия с резьбой М3

Length of the hull is 428 mm. The hull is already adapted for the new limiter Lithium Polymer batteries.   ALL boats are painted in matrices. Yes, and glossy automotive two-component paint firm Duxon ... Very impressive and durable. To increase the strength of the hull, along the entire central part of the bottom of the hull, a strip of carbon is pasted! This has already become a necessary attribute, with the increased speeds and capacities of these minischarges! ECO MINI Alfa boat, offered to you, is fully assembled and ready for the boat races. The so-called version of ARTR (almost ready to run). Lipo in complet! You just need to install your receiver. And that's it! Complete set of delivery:   1. LiPo battery pack with a capacity of 3S 1500 mAh 25С, or 2S 2200 mAh 25C pack.  2. Installed three-phase electric motor Tenshock Viper 1515 - one of the best solution in this class.  3. Motor water cooling is installed on the electric motor.  4. An electronic controller is installed and connected - ZTW ESC.  5. Installed and mounted the whole steering wheel system. Traction, rocking, etc. Installed steering servo.  6. Mounted shaftline: motor - coupling - propeller shaft.  7. There is a perfectly balanced, ready-to-race stainless steel propeller. You only need to connect your receiver. Only!    You need 40+ laps in race: take the Alfa MINI! JUST THRUST MY...  Evgeniy Gromov.

ECO MINI EXPERT.   Budget version for beginners.   Included you get everything except control equipment and the charger.   Our new ECO concept ...   For a long time I have swarmed up with the idea about a project budget.   It should not only deal with jobs and blowing, but also to do something for the pioneers, that is sudomodelistov beginners who are taking their first steps in the subject ECO boats.   Prerequisites for the construction of of such a model: As practice shows - to collect effectively driving MINI ECO (just like ECO) - without complex necessary skills from zero level - it is almost impossible. As a result, much deliberation, the purpose of which was: SIMPLIFY BEGINNER START in ECO RACE, was implemented this one project that I bring to your attention: So. We have 200% racing hull MINI ECO 2007 Made in armor-piercing performance for *beginner* - especially added extra layers of fiberglass .. Then we choose on Hobby King most budget, but checked on many MINI boats and ensure a good motor, battery and servos. Added to the set - controller from a reputable manufacturer.   All this was inserted into the body of the ECO MINI 2007, which we starting all the necessary hardware: CNC milled motormount, Racing propeller, maded and balance from Gromov, Assembled steering ruder unit, Glued emergency switch for stopped the boat. Glued tubes for input - output motor cooling water, Cut in the right places inlets - drain water barrier to flip the boat.   Even water cooling on the motor installed and connected silicone tubing ...   You will only need installed reciever insert in your boat! And nothing more!!!   The boat has been tested and tested on the waves, and in calm weather.   Here's a video of the first test:   As a result, we are fully *ready to fight* MINI ECO 2007 in garanteed driving condition, received the affliction which our *pioneer* EXACTLY not disappointed in ECO works.   This was my key idea that was started this whole budget epic ...   This model will become a starting platform that can set the tone for further work in the direction of our ECO *beginner*.   Completeness MINI ECO 2007 ARTR:   Fully assembled boat. Not included only receiver. Installed motor Turnigy 2445 3000KV On the motor installed water cooling spiral of the aluminum tube. Bolted to the motor coupling 3x2mm Installed and connected to the motor controller 30A. With watercooling. Inserted battery 3S1P 1500mAh. Compiled steering parts wish micro servo. Rudder installed. There jumper to interrupt the power circuit. Cover hatch in complete.   Place your receiver in boat and in fight!   Turning the boat on the water you should be exposed to at least 2 meters! Otherwise, your boat will be dived! Be aware of this!   On my mini - turning diameter of 3 meters! The race is quite enough! BELIEVE ME!   Good luck in boat battles, *beginner*! P.S. this complet, get 41 laps in 2018 year. In Holland race.

Set of parts for building of rc model boat. ESC, Ruder set, Motor and accessories, Servo and servoholder, Accessories for building.

New shaftline for ECO class. Steinless steel tube 3×2 mm. Shaft 1,5×3.0 mm, with chrome coating. Bronze bearing. Adapter: for installation propeller DD 3mm  This shaftline made for installation in all eco/fsre boats. Maximum possible diameter of propeller: 33 mm. Shaftline made for best competition level results!

Set of parts for rc model hull, with following parameters: Hull long: 450 mm Hull Width: 128 mm Hull height: 92 mm Weight: 115-120 gramms Carbon kevlar, and carbon hull versions. Float chamber is glued. Hull offers with following colours: Yellow, Green, Red, White.

Wrapping screw-analogue of plastic propeller, from Graupner. Propellers pro milled from a single piece of Duralumin, on a program milling machine. Precision and sameness of blades: maximum possiblity! These propellers,  are ideally suited to all classes HYDRO/MONO boats. Specifications: Rotation: Right, Left (please, select in Split option) Materialal: duralumin. Props diameter (please, select in Split option) Ratio of props, (step to diameter): 1.4 (diameter digit, multiply by 1.4-get step in mm.) Internal thread in propeller hub: M 4 or Drive Dog (DD) 4.75 mm (3/16 ") (please, select in Split option) Diameter of propeller hub: 6.5 mm. Weight: 2.5-4 grams.   Propellers isis practical do not need additional balancing. The obvious advantages of screws of such performance: their hardness and durability with respect to plastic propellers; Their accuracy of manufacture and sameness of geometrical parameters of both blades, at propellers o ofthe same type size; The debugging and additional balancing of propellers (if required), are made with minimal effort.

Coupling for connecting propeller shaft and motor shaft. Couplings dimensions: For motor shafts 2-2,3 mm diameters:    length: 25mm diameter: 8 mm For motor shafs 3-4 mm diameters: length: 26 mm diameter: 12 mm For motor shafts 5-6 mm diameters:   length: 28 mm diameter: 13 mm For motor shafts 8 mm diameters:  length: 30 mm diameter: 14 mm Material - 7075 duraluminium. Fixing shafts in the clutch - imbus M3. 2 pieces on each side of the coupling. Coupling diameters dimensions: depending on the chosen from the list, you will need shaft diameters. Coupling is made at the lowest possible beats and eccentricity. In such couplings from Ecomastеr, hundreds ship modellers go, all over our world ...   Choose your Coupling from the pop-up list at the top of this page.

Set for rc hobby boats racing. Boat with accessories. Complete of delivery: one boat with accessories.