Ecomaster rc boats
On lavky since 2020 | 229 Sales |

Electric motor Tenshock CZII-2250

New without tag

Shipping information

Ukrposhta (Free shipping)


Electric motor Tenshock for your Winn!

Tenshock CZII 2250


Today, this is the top of the creative thought of the chinese motor builders!

The most advanced technology in the threephase motor building embodied in this motor!

Japanese iron for the stator, the most powerful magnet of neodymium / iron / boron alloy.

And besides, the temperature is also very resistant - up to 180 Degrees!

Precision balancing of rotor, and japanese ball bearings ...


What else to say. Put in the boat and win !!!


Universal threephase AC motor, for a variety of applications in modeling and not only.

A very wide range of motor, revolutions ensures that you can choose for yourself the engine that you need here and now!

The motor is made in a six pole version. This means that its efficiency is increased in comparison with two pole motors by 2-3%.

Due to the quality materials, and 12 slots in stator, used in the design of the motor - it has an advantage in efficiency over the Viper motor series - by 3-5%.

And for sports, you understand how important this is!

Flexible power wires are outgoing from the back cover for convenient connection of the motor to controller.

Characteristics  Tenshock CZ II 2250

Number of rotor poles: 6.

Motor body length: 70 mm

Body diameter 38 mm

Shaft diameter: 5×17 mm.

Motor weight: 370 grams.

Type of rotor magnets: neodymium / iron / boron 180°

Maximum motor power: 3550 Watt.

Recommended timing controller 7°-15°

Assembly fittings with 6 × M3 thread.

More from this vendor

New version, ECO expert, from Ecomaster. Boat that goes directly *from the table*   Over the past two racing seasons, we have found the ideal position inserts all internally in the boat. Motorholder, propeller shaft line, steering ruder . This is essential for fast and high-quality drive this boat. Win Poland Tenshock Cup2016 in class ECO Expert. Win Baltic Cup 2016 in class ECO Expert. Win Swiss Cup 2017 in class ECO Expert. Win Belgian Cup 2017 in class ECO Expert. Win Spain championship 2017 in class ECO Expert Win Ukrainian Championship 2017 in class ECO Expert. Win Ecomaster Cup 2017 in class ECO Expert. Win Swiss Cup 2018 in class ECO Expert. Win Ukrainian Championship 2018 in class ECO Expert. Win Ecomaster Cup 2018 in class ECO Expert. Win Swiss Cup 2019 in class ECO Expert. Win Ukrainian Championship 2019 in class ECO Expert. Win Ecomaster Cup 2019 in class ECO Expert.   * Bottom of the boat is made from carbon kevlaf fiber - for greater strength of hull. * Boat glued to the inside of all the necessary installation electronics.   Compelct of delivery:   Was glued: * Steering column has ruder and all co-parts. * Mounting servos * Motorholder * Propeller shaft line. * Have the propeller shaft of the wire 2 mm, with the adapter under 3 mm, for mounting the propeller. * Coupling 2.00 x 4.00 mm. for connecting the motor shaft and propeller shaft - in complect. * Shortstop power circuits (emergency stop) - the requirement of the rules. * Paste the power wires from the emergency switch on the controller and the battery. * Set the suction hose and tubes for water cooling of motor and ESC. * In hull, cut holes for the intake and take out of water in case of hull revolution.   In boat installed:   * Brushless electric motor Tenshock Viper 1530 3100KV wish wathercooling, coupling connecting it to the propeller shaft. * Sharpened and precision balanced propeller for this boat. From stainless steel. 30 mm diameter. * Electric speed controller ZTW 80A,wish wathercooling, and fully water protection. * Servo Corona 268. Metal gear. * LiPo Battery for limiter: 3S1P 5800 mAh And yet ... In the battle ....   Boat is almost no need to set up on the water ..
Tenshock motors for competition of boat racing. Tenshock 4 Pole Brushless Motor Viper 1540 Features 1.CNC machined AL casing 2.Efficiency 4-Pole 6 Slots brushless motor 3.High purity copper windings making maximizes conductivity 4.Powerful sintered neodymium magnet 5.High torque and light weight 6.Swallow tail rotor 7.High grade bearing Details  Poles: 4 Diameter: 29mm   Length: 58mm ØShaft: 4mm Length shaft: 14mm  Weight: 180 g Max. RPM: 65.000 Max. temp: 180 °C  Timing: 8-10 Mounting hole distance: 19mm
Full complet of competition level race boat  HYDRO  1 class. Complet: Hull: TYP Exe 2,5 Carbon/kevlar fiber. Motor: Tenshock Viper 1530/8/3480KV with Tenshock watercooling. ESC: 100A watercooling, and full waterproofing. LiPo: 3S1P 5800 mAh Limiter pack. Servo: 30×15×30 metal gear, BB. Prop: Tenshock CNC 36 mm, 2 Blades.   Full assembled and ready to go complet
Set of parts for rc model hull, with following parameters: Hull long: 450 mm Hull Width: 128 mm Hull height: 92 mm Weight: 115-120 gramms Carbon kevlar, and carbon hull versions. Float chamber is glued. Hull offers with following colours: Yellow, Green, Red, White.
Our most successful for today boat is available in very limited quantities. Many time, this hull in full, 6 participants race, have 50+ laps results . Colors of hull: red, yellow, white, green. Complete of delivery: Was glued: * Rudder holder, rudder, wish all needed parts.  * Servo mounting. (for servo TYP Hitec 81)  * Motor mount for 28/29 mm motor diameter. * Shaft line with 1,5 mm shaft. * Have propeller shaft of the wire 1,5 mm, with adapter M4/3mmDD for screwing propeller. Coupling 1.50 x 4.00 mm. for connecting motor shaft and propeller shaft - complete. * Shortstop power circuits (emergency stop) - the requirement of the rules. * Paste the power wires from the emergency switch on the controller and battery. * Installed ingouing and utgouing wayer pipes, for motor/esc watercooling. * In hull, cut hole for intake and outgoing of water, for hull coup system.   You need to install: * Propeller * Servo for rudder * Motor Controller
Coupling for connecting propeller shaft and motor shaft. Couplings dimensions: For motor shafts 2-2,3 mm diameters:    length: 25mm diameter: 8 mm For motor shafs 3-4 mm diameters: length: 26 mm diameter: 12 mm For motor shafts 5-6 mm diameters:   length: 28 mm diameter: 13 mm For motor shafts 8 mm diameters:  length: 30 mm diameter: 14 mm Material - 7075 duraluminium. Fixing shafts in the clutch - imbus M3. 2 pieces on each side of the coupling. Coupling diameters dimensions: depending on the chosen from the list, you will need shaft diameters. Coupling is made at the lowest possible beats and eccentricity. In such couplings from Ecomastеr, hundreds ship modellers go, all over our world ...   Choose your Coupling from the pop-up list at the top of this page.


Top !
Merci ecomaster pour ma commande du hydro 1 et mini eco vous êtes le meilleur je recommande vivement a bientôt pour ma prochaine commande
Arrived perfect, very nice RC Mini Boat.
Should be great for setting new records.
High marks for an order placed the night before
the invasion and still arrived to my surprise.
Our prayers are with Ukraine and Ecomaster boats.
Merci ecomaster pour ma petite commande vous êtes au top service qualité je suis très content next order soon
Excellent build quality, good packaging and tracked shipping. Highly recommend and will use your site to order again in future.
Hello, unfortunately I still have not received the Mini Mono Slider. The tracking said it had been boarded but still not received. Your site is well presented and no problems and the information via Facebook from evgeniy helped for a smooth purchase. Hopefully the boat will arrive next week then I will pay for my next orders.
Service top produit super qualité et livraison très rapide eco master mon meilleur
J'attend depuis plusieurs jours le remboursement, je ne comprends pas pourquoi lavky ne fait pas le remboursement de la commande annulée
Ok ! Thank you !

Shipping and Policies


This store is integrated with the Western Bid™ e-commerce platform, and Western Bid, Inc. is the Merchant of Record for all purchases made in this store. Therefore, you will see "WESTERN BID" listed as the payee on your PayPal account and credit card statement.

I accept PayPal or Credit Cards only.
• Your items will be made and shipped only after the payment is cleared.
• If you don't have Paypal account and would like to pay with your Credit Card, check this step-by-step tutorial on PayPal:

Your order will be shipped only after the payment is cleared. This means if you pay via Paypal e-checks there could be delay in 3-5 business days. You can check the status of your payment in your Paypal account or in the correspond invoice here on Lavky.


All the items in the order will be securely packed and shipped within 1-3 working days of payment.
Some items may take longer. If the processing time is more than 7 days, it is clearly stated in the product description.

Delivery Address:

• Please make sure your shipping address is correct at the checkout. 

We will ship your order to the address specified on checkout, and not to the address specified on Paypal.

Terms of Delivery

We always ship parcels with a tracking number. We will update you on the tracking number once your order has been prepared and shipped.

Usually delivery takes between one a half and four weeks.

Please note that delivery times may vary depending on your location and customs clearance, so we cannot guarantee the exact time of arrival.

Here are the approximate delivery times:

- USA: 1.5 - 2.5 weeks

- Canada: 2-3 weeks

- Europe: 1-2 weeks

- Australia: 2-3 weeks (sometimes longer, depending on Australian customs)

- The rest of the world: 2-3 weeks

Delivery method

We ship all the parcels from Ukraine (from our logistics centers in Kyiv and Chernivtsi) via international services (FedEx, UPS) in two stages. 

First a parcel is sent by express delivery service to Europe, and then, it is shipped by air mail to the United States, Canada or Europe. 

You can see the movement of the parcel by a tracking number only in the second stage - 4-6 days after sending your order from our center. We estimate the delivery time to 12-18 days.

Express delivery is available only on individual request. Please contact us if you need Express delivery before placing an order so we can update shipping options.

Customs duties and taxes

Customers are responsible for any fees, taxes and duties related to delivery and ordering products to their country of destination.


Your order will arrive in a safe cardboard box, with due packaging and protection from damage.

Refunds and Exchanges

I want my clients to be happy, so let me know if you have any problems.

If you are not satisfied with your items / service for any reason, please contact me with the problem before leaving a feedback.