First, fully selfmade MONO1 from Ecomaster. We tested this hull all season... Results? 30+.....   Dimensions: 650×185 mm Material of hull: carbon kevlar. Colours of hull: white, green, yellow, white. Full carbon version is possible. And there's combinations (+20€). Please, make your choice on option.   Complete of delivery: hull with glued float chamber. assembling dimensions.

Our most successful for today boat is available in very limited quantities. Many time, this hull in full, 6 participants race, have 50+ laps results . Colors of hull: red, yellow, white, green. Complete of delivery: Was glued: * Rudder holder, rudder, wish all needed parts.  * Servo mounting. (for servo TYP Hitec 81)  * Motor mount for 28/29 mm motor diameter. * Shaft line with 1,5 mm shaft. * Have propeller shaft of the wire 1,5 mm, with adapter M4/3mmDD for screwing propeller. Coupling 1.50 x 4.00 mm. for connecting motor shaft and propeller shaft - complete. * Shortstop power circuits (emergency stop) - the requirement of the rules. * Paste the power wires from the emergency switch on the controller and battery. * Installed ingouing and utgouing wayer pipes, for motor/esc watercooling. * In hull, cut hole for intake and outgoing of water, for hull coup system.   You need to install: * Propeller * Servo for rudder * Motor Controller

ARTR MINI MONO BOAT Size of hull: 450*135mm Installed in boat: -Watercooled system for motor and ESC. -Brushless 4 Pole Motor VZ1515/4000KV -Brushless Waterproof ESC 40A -Servo -Urgency Switch  -Number Holder -Two plastick Props 30mm diam. -All other parts assembled   Feature:   -ARTR (Almost Ready To Run)  -For control using 2 chanel remote control radio -RC functions: 1. ruder chanel: right/left   2. forward/stop with proportional control -With 1 brushless electric motor   -Model is ready for operation once the receiver have been installed    -Material: Glass Firber/Carbon Firber/Kelvar. PLEASE make your choise in "Option". -Hull color: Glass fiber boats: White/Racing Red/Yellow Carbon fiber: black carbon color: White/Racing Red/Yellow Kevlar carbon fiber: black/yellow fiber color: White/Racing Red/Yellow -In ARTA (Almost Readu To Assembled) version: You will have glass fiber, or carbon fiber, or kevlar/carbon fiber, (choice your wishes, in Options) painted, with installed fully glued parts, inside hull. All electrick parts, you must self installed, on your boat. All electric parts, in complet. -Watercooled system for motor and ESC. -Brushless 4 Pole Motor VZ1515/4000 KV -Brushless Waterproof ESC 40A -Servo -Urgency Switch  -Number Holder -Two plastick Props -All other parts for assembled.   Please, make your choise!