Светодиодные накладки на пороги для автомобилей Dodge Charger 2005-2011 Dodge Charger 2005-2011 из нержавеющей стали, в комплект входят 4 детали. Подножки RS Custom Steel готовы к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля, идеально подходит для вашего автомобиля. ▪ Подходит для всех: Dodge Charger 2005-2011 из нержавеющей стали, в комплект входят 4 детали. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта мы рекомендуем установку специалистом. Подключение к источнику питания 12 Вт., к освещению двери. ▪ Точность измерения, RS Индивидуальная лазерная резка обеспечивает идеальную посадку  ▪ Измените свой автомобиль на персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30 долларов. ⚠ Я nstrukc и я ① Поместите крышку RS Custom на поверхность перед постоянным креплением, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте окончательное место с помощью куска клейкой ленты (при необходимости).  ② Очистите поверхность, на которую будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ей полностью высохнуть. Снимите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 23 секунд. Подключите к источнику питания 12 Вт. к освещению двери. Надеемся, вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые элементы на фотографиях товара интерьеру/экстерьеру вашего автомобиля.  Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы дать вам представление о том, как будет выглядеть наш продукт.  Ваше изделие RS Custom будет выглядеть иначе при солнечном свете, чем в помещении.  Именно это делает нашу продукцию такой красивой и уникальной! #dodge chargeer #dodge #charger #logo chargeer #emblem chargeer #logo dodge #emblem chargeer #design car #muscle car #accessories car #door sills car #protector dodge

Door sills for cars BMW E38 IL inscription Vip Individual BMW INDIVIDUAL E38 740 iL 1994-2001 door sills. Door sills made of rubber-plastic material with aluminum insert (manual filling). Ready for easy installation for an instant custom update to your interior look. The product is completely handcrafted in a die-cast molding and laser cut aluminum liner for a custom lettering that fits your vehicle perfectly, covering areas that your vehicle manufacturer has neglected. It adheres to the vehicle base for a secure permanent hold. ▪ Suitable for all:BMW INDIVIDUAL E38 740 iL 1994-2001   ▪ No adhesive primer required, very easy installation without any tools or accessories ▪ Measurement accuracy  ▪ Change your vehicle to a personalized luxury and unique vehicle. 1. Before permanent bonding, place the cover on a surface to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  2. Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  3. Continue pressing, especially at the edges, for 30 seconds. Worldwide delivery. BMW INDIVIDUAL E38 740 iL 1994-2001 door sills.  Door sills made of rubber-plastic material with aluminum insert (manual filling). Ready for easy installation for an instant custom update to your interior look.  The product is completely handcrafted in a die-cast molding and laser cut aluminum liner for a custom lettering that fits your vehicle perfectly, covering areas that your vehicle manufacturer has neglected. It adheres to the vehicle base for a secure permanent hold.▪ Suitable for all:BMW INDIVIDUAL E38 740 iL 1994-2001

Накладки на пороги для BMW E34 M5 Материал: пластик. Подпись: M5 Устанавливаются вместо штатных пластиковых порогов автомобиля. Крепление на металлические пороги автомобиля. Возможность заказа с Вашей надписью под заказом. Изготовление накладок на пороги по индивидуальному заказу с любыми надписями и логотипами для автомобилей BMW. Быстрая доставка. Качественно. #BMW #BMW #M5 #Custom #M5BMW #Mperfomance #perfomance #accessories #avtoaccessories #bmwdesign #bmwlogo #bmweemblem #bmwM #M #car #logocar #carshow  #musclecar

Led door sills Jeep Grand Cherokee IV 2010-2021 with logo JEEP RS Custom are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone:  Door sills Jeep Grand Cherokee IV 2010-2021  ▪ 100% stainless steel (polished).  ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting.  ▪ Measuring precision,  RS Custom laser cut for a perfect fit. Steel running boards Jeep Grand Cherokee IV 2010-2021 RS Custom are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone: Jeep Grand Cherokee IV 2010-2021   ▪ 100% stainless steel (polished).  ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Measuring precision, RS Custom laser cut for a perfect fit.  ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $30 surcharge.   ⚠ I am nstrukc and I  ① Place the RS Custom cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface where the RS Custom door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes.  ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your car. - We try to take pictures in different lighting conditions to give you an idea of how our product will look like.  -Your RS Custom product will look different in the sun than it does indoors.  -That's what makes our products so beautiful and unique!

Светодиодные накладки на пороги Volkswagen Tiguan I 2007-2016 гг. Volkswagen Tiguan I 2007-2016 гг. в комплекте 4 шт. Стальные подножки RS Custom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит всем: Volkswagen Tiguan I 2007-2016 гг. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Castom обеспечивает идеальную посадку. ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я нструкц и я ① Поместите крышку RS Custom на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт. - Ваш продукт RS Custom будет выглядеть по-другому при солнечном свете, чем в помещении.  -Вот что делает нашу продукцию такой красивой и уникальной!

Car led door sills Toyota Sequoia 2008-2021 Toyota Sequoia 2008-2021 includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Toyota Sequoia 2008-2021 includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 23. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  - This is what makes our products so beautiful and unique!

Car led door sills for cars Dodge Durango GT 2018+  Dodge Durango GT 2018+ with stainless steel includes 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone: Dodge Durango GT 2018+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!  #dodge #dodge durango #dodge gt #durango car #protector car #logo durango #emblem durango #design dodge #svg #gt #avtoaccessories #dodge srt #dodge hellcat #dodge mopar #dodge challenger #challenger 

Led led door sills Chevrolet Cruz 1 2008-2016 Door sills with illumination Chevrolet Cruz 1 2008-2016 with stainless steel includes 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  ▪  Suitable for everyone: Dodge Charger with stainless steel includes 4 pieces. ▪  100% stainless steel (polished). ▪  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪  Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.  ⚠  I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Автомобильные светодиодные накладки на пороги Toyota Rav4 V 2013-2018 г.в. надпись RAV4 4 шт. Toyota Rav4 V 2019+ с нержавейкой в комплекте 4 шт. Стальные подножки RS Custom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех: Toyota Rav4 V 2013-2018 с нержавейкой в комплекте 4 шт. ▪ 100% нержавеющая сталь (полированная).  ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Castom обеспечивает идеальную посадку.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я нструкц и я ① Поместите крышку RSCastom на поверхность перед ее постоянным прикреплением, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RSCustom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт. - Ваш продукт RSCustom будет выглядеть по-другому при солнечном свете, чем в помещении. -Вот что делает нашу продукцию такой красивой и уникальной!  надпись RAV4 4 шт. Toyota Rav4 V 2013-2018 с нержавейкой в комплекте 4 шт. Стальные подножки RSCustom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех: Toyota Rav4 V 2019+ с нержавейкой в комплекте 4 шт. ▪ 100% нержавеющая сталь (полированная).  ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Custom обеспечивает идеальную посадку.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я нструкц и я ① Поместите крышку RS Custom на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт. - Ваш продукт RS Custom при солнечном свете будет выглядеть иначе, чем в помещении.  - Именно это делает нашу продукцию такой красивой и уникальной! #Toyota #toyotarav4 #logo toyota #emblematoyota #design rav4 #toyota car #accessories #avtoaccessories #logo #emblema #door sills 

Car led door sills Nissan X-Trail T32 Nissan X-rail with stainless steel includes 4 pieces.  RS Custom steel footpegs are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car.   ▪ Suitable for everyone: ▪ Suitable for everyone: Nissan X-rail with stainless steel includes 4 pieces.   ▪ 100% stainless steel (polished).  ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Measuring precision, RS Custom laser cut for a perfect fit.  ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $30 surcharge.   ⚠ I am nstrukc and I ① Place the RS Custom cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface where the RSCastom door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes.  ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your vehicle.  - We try to take pictures in different lighting conditions to give you an idea of how our product will look like.  - Your RS Custom product will look different in the sun than it does indoors. -That's what makes our products so beautiful and unique! #Nissan x-trail t32 #nissan t32 #t32 #nissan x trail #x-trail #logo nissan #emblema nissan #protector car #design car #accessories car 

Car led door sills Ford Fusion 2012-2022 Ford Fusion 2012-2022 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Ford Fusion 2012-2022 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist.  Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique! #ford #ford fusion #fusion #logo ford #emblema ford #design ford #protector car #avtoaccessories # 

Car led door sills for cars Ford Mustang 5 2005-2015.  Ford Mustang 5 2005-2015 with stainless steel includes 2 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable Ford Mustang 5 2005-2015 with stainless steel includes 2 pieces.  ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I  ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Car led door sills Mitsubishi Lancer X 2008-2020 Mitsubishi Lancer X 2008-2020 included 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone: Mitsubishi Lancer X 2008-202 included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.   Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Автомобильные светодиодные накладки на пороги Ford Focus MK 3 2012-2018 гг. Стальные панели готовы к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит всем: Ford Focus MK 3 2012-2018 гг. в комплекте 4 шт. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, дизайн, вырезанный лазером, обеспечивает идеальную посадку. ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. ⚠ Я нструкц и я ① Поместите крышку на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен дверной порог, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! Обязательно проверьте, точно ли некоторые позиции на фотографиях товара соответствуют интерьеру/экстерьеру вашего автомобиля. Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы дать вам представление о том, как будет выглядеть наш продукт. На солнечном свете ваш продукт будет выглядеть иначе, чем в помещении.  Именно это делает нашу продукцию такой красивой и уникальной!

Led door sills Toyota Corolla XI 2013-2019 Toyota Corolla XI 2013-2019 includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Door sills with illumination Subaru Outback IV 2009-2014 with stainless steel includes 2 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Subaru Outba with stainless steel includes 4 pieces/. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist.Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. Continue pressing, especially at the edges, for 30 seconds.Connect to 12W power. to the door lighting.We hope you enjoy our product!-Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.- We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Door sills BMW E39 standard with logo ///M Material plastic Includes 4 pads. Installation in standard plastic car sills.  Custom.  Delivery worldwide.

Led door sills  BMW X5 E70 witg logo ///M Perfomance. BMW X5 E70  with stainless steel includes 4 pieces. Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Ford Mustang with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.  ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Trunk lid emblems Chevrolet Silverado RST blood plastic Chevrolet Silverado RST blood emblem design on the rear trunk lid with Chevrolet Silverado RST blood. High quality ABS plastic. The emblem insert is stainless steel. A beautiful emblem for your car will attract attention and attract attention to the car. Stylish car accessory. Chevrolet Silverado RST blood is the ideal solution for cars! Decorate the back of your Chevrolet Silverado RST blood. Fastening with 3M tape. Worldwide delivery.A beautiful emblem for your car will attract attention and attract attention to the car  Stylish car accessory. Chevrolet Silverado RST blood is the ideal solution for cars! Decorate the back of your Chevrolet Silverado RST blood rear logo. Fastening with 3M tape. Worldwide delivery.

Fender emblem Ford Mustang BULLITT logo stainless steel Material plastic. Logo emblem stainless steel. ncludes 2 emblems. The emblem insert is stainless steel. The emblem in the standard car grille is an element of tuning the appearance of your car. A stylish car accessory will decorate your car and give exclusivity and interest of people in your car's appearance.Individuality and style of the car with our emblems in the standard radiator grille We make from high-quality plastic (colored acrylic). We also produce emblems for car radiator grilles.High-quality industrial laser equipment. Stainless steel fastening. Worldwide deliver

Car led door sills Nissan Rogue 2015+ includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Nissan Rogue 2015+ includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills Dodge Charger 2011+ Dodge Charger  with stainless steel includes 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: dodge Charger with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.   This is what makes our products so beautiful and unique!

Car hood holder Ford Mustang 5 Shelby Material stainless steel. Individual design. Custom. Possibility of ordering with your design. Delivery worldwide. Made from high quality stainless steel. The carichon car holder is an auto accessory for cars designed for owners of the Ford Mustang SHELBY car brand.This product is laser cut from stainless steel material. Qualitatively carved details of the picture and inscription. Processed and partly made by hand. The product consists of three layers of metal. This auto accessory for Ford Mustang Shelby will delight you and the people around you. Our products are of very high quality and our company can produce parts to order. Any kitty, inscription and design. Our products can often be seen at auto shows and auto shows all over the world. We ship our products to our customers all over the world.

Car led door sills with illumination Dodge Challenger 2008-2021 Dodge Challenger 2008-2021 with stainless steel includes 2 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Dodge Challenger 2008-2021 with stainless steel includes 2 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! - Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors.   This is what makes our products so beautiful and unique!