Car led door sills Kia Stinger 2018-2023 white end red included 4 pieces. RSCastom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Kia Stinger 2018-2023 included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 23. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS ustom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills Chevrolet Volt 2011-2019 included 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Chevrolet Volt 2011-2019 included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! - Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  - Your RS Custom product will look different in sunlight than indoors.  - This is what makes our products so beautiful and unique!

Car led door sills Chevrolet Camaro 5 2009-2015 Transformers Chevrolet Camaro 5 2009-2015 with stainless steel includes 2 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Chevrolet Camaro 5 2009-2015 with stainless steel includes pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.   - This is what makes our products so beautiful and unique!

Led led door sills Chevrolet Cruz 1 2008-2016 Door sills with illumination Chevrolet Cruz 1 2008-2016 with stainless steel includes 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  ▪  Suitable for everyone: Dodge Charger with stainless steel includes 4 pieces. ▪  100% stainless steel (polished). ▪  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪  Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.  ⚠  I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills BMWX5 E70 2006-2013 Door sills with illumination BMW X5 E70 2006-2013 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look.  This laser cut is 100% accurate for your car, perfect for your car.  ▪  Suitable for everyone: BMW X5 E 70 with stainless steel includes 4 pieces.  ▪  100% stainless steel (polished). ▪  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪  Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.  ⚠  I n s t r u k c and I ①  Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS CUstom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RSCastom product will look different in sunlight than indoors. - This is what makes our products so beautiful and unique!

Led door sills Fiat 500 2007+  Door sills with illumination Fiat 500 2007+ with stainless steel includes 2 pieces. RSCastom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  ▪  Suitable for everyone: Dodge Charger with stainless steel includes 4 pieces. ▪  100% stainless steel (polished). ▪  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪  Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.  ⚠  I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Автомобильные светодиодные накладки на пороги светодиодные Dodge Durango 2010-2014 гг. Накладки на пороги с подсветкой Dodge Durango 2010-2014 из нержавеющей стали в комплекте 4 шт. Стальные подножки RS Custom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера.  Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля.  ▪  Подходит всем: Dodge Durango из нержавеющей стали включает 4 предмета.  ▪  100% нержавеющая сталь (полированная).  ▪  Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери.  ▪  Точность измерения, конструкция лазерной резки RS Castom обеспечивает идеальную посадку.  ▪  Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$.  ⚠  Я нструкц и я  ① Поместите крышку RS Custom на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости).  ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты.  ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт.  Ваш продукт RS Custom будет выглядеть по-другому при солнечном свете, чем в помещении.  Именно это делает нашу продукцию такой красивой и уникальной!

Door sills Dodge Durango R/T 2011-2020  Door sills with illumination Dodge Durango R/T 2011-2020 with stainless steel includes 2 pieces.  RS Castom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  Suitable for everyone:  Dodge Charger with stainless steel includes 2 pieces.  100% stainless steel (polished).  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  Measuring accuracy, RS Castom laser cut design ensures perfect fit  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.   I n s t r u k c and I  Place the RS Castom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  Clean the surface on which the RS Castom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RSCastom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Car led door sills Mitsubishi Outlander II 2007-2012 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone:  Mitsubishi Outlander II 2007-2012  with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! - Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Door sills Mitsubishi Padgero Wagon 4 2006-2021 with stainless steel includes 4 pieces. RSCastom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone:  Mitsubishi Outlander II 2007-2012  with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RSCastom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Car led door sills Toyota Tundra III 2014+ with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Toyota Tundra III 2014+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  - This is what makes our products so beautiful and unique!

Decorative insert in the bonnet compartment of a Ford Mustang 6 GT 350 S550 car Material stainless steel. Inscription MUSTANG. Logo Mustang. Possibility of ordering with any color of inscription and logo. Delivery worldwide.

Aluminum pads for standard pedals of car BMW X5 E53 Designed for cars with automatic transmission. Inscription X5. Includes 3 pads. For cars with automatic transmission. Replica of the original. Custom. Delivery worldwide.

Aluminum pads for standard pedals of car BMW X5 E70, X6 E 71 M Perfomance Designed for cars with automatic transmission. Inscription. M Perfomance Includes 3 pads. For cars with automatic transmission. Replica of the original. Custom. Delivery worldwide.

Aluminum pads for standard pedals of car BMW AC Schnitzer e12, e21 e39, e30 ,e34, e36, e38, e39, e53 Designed for cars with automatic transmission.  Inscription AC Schnitzer. Includes 3 pads.  For cars with automatic transmission.  Replica of the original.  Custom.  Delivery worldwide.

Aluminum pads for standard pedals of car BMW M Perfomance f10, f11, f15Designed for cars with automatic transmission. Inscription M Perfomance. Includes 3 pads.  For cars with automatic transmission.  Replica of the original.  Custom.  Quality car accessories for your car interior. Installation on top of regular car pedals. Attachment included in shipment. Unique design. Fast delivery worldwide. Delivery worldwide.

Aluminum pads for standard pedals of car BMW ALPINA  e12, e21 e39, e30 ,e34, e36, e38, e39, e53 Designed for cars with automatic transmission.  Inscription M Perfomance. Includes 4 pads.  For cars with monual transmission.  Replica of the original.  Custom.  Delivery worldwide.

Алюминиевые накладки на штатные педали автомобиля BMW X6 ///M Предназначен для автомобилей с автоматической коробкой передач.  Надпись Х6///М В комплекте 3 накладки.  Для автомобилей с автоматической коробкой передач.  Реплика оригинала.  Обычай.  Доставка по всему миру.

Aluminum pads for standard pedals of car Chevrolet Cruz Designed for cars with automatic transmission.  Inscription CRUZ. Logo Chevrolet. Includes 3 pads.  For cars with automatic transmission.  Replica of the original.  Custom.  Delivery worldwide.

Автомобильные светодиодные накладки на пороги Dodge Durango 3 2011+  включает 4 шт. Стальные подножки RSCastom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех: Dodge Durango 3 2011+ включает 4 штуки. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Custom обеспечивает идеальную посадку.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я нструкц и я ① Поместите крышку RS Custom на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости).  ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты.  ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключите к источнику питания 12 Вольт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт. Ваш продукт RS Custom будет выглядеть по-другому при солнечном свете, чем в помещении. Именно это делает нашу продукцию такой красивой и уникальной!

Range Rover Evogue 2017+ aluminum pads for standard car pedals.Material aluminium.  Includes 3 pads. For cars with automatic.  transmission monual. Inscription ST.  Worldwide shipping

Car led door sills Toyota Land Cruiser Prado 120 2002-2009 Material stainless steel. Includes 2 pads Logo Land Cruiser Prado 120. Custom.  ▪ 100% stainless steel (polished) ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12 W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RSCastom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Led door sills Audi A4 B8 2008-2015 includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Audi A4 B8 2008-2015 includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Накладки на пороги Infiniti QX70 (FX) 2008+  Материал нержавеющая сталь. В комплекте 4 подушечки  Надпись ИНФИНИТИ.  Обычай. Возможен заказ с надписью Ваня.  Крепление на металлические пороги автомобиля. Лента монтажная типа 3м.  Доставка по всему миру.