Panel in the technique of marquetry, size with a frame – 21х21 inches (55x55 cm). When creating the work, wenge veneer, spectacle poplar, American walnut, sycamore maple, white ash, mahogany, gabon, and sweet cherry were used. Frame - tinted pine, brushing, patination. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Custom order is possible in the desired sizes. We accept orders for the manufacture of pet portraits according to your photos. Custom order can be without a frame. Fast international delivery - 8 days. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Decorative tray, diameter 16 inches (40 cm). Wood table tray is made using marquetry technique. The tray is equipped with four metal legs in gold color. Pens are metal plus ceramic with gold decal. The front side is made of a set of veneers - ash, sapeli, American walnut, paduk, rosewood, gabon, cheredzheyra. The product is coated with environmentally friendly linseed oil and shellac. Fast international delivery - 8 days Warning: Do not put utensils cutlery over 70 ° C on the tray (warm tea, coffee are possible). Do not use in the microwave. Also, the tray can not be left in the water for a long time.

Marquetry panel. Glass of wine Work in the technique of marquetry, the size of the frame is 28x21 inches (72x53 cm). When creating the work, we used veneer, American walnut, koto, olive ash, Gabon, paduk, maple, makore. Frame - sweet cherry, varnish, patination. The work is covered with linseed oil and shellac. The frame is equipped with pendants. It is possible to order under the order in the required sizes. Marquetry is an art set of thin wooden veneers of different colors and textures. Pieces of wood, joining along the edges between themselves, form a solid image, which is then glued to the base. The role of the colors in marquetry is played by the texture and shade of the wood, so the most important task is to determine the composition and artistic skill of the master in order to select and combine the correct veneer fragments. In the marketer's workshop there are hundreds of different types of veneers, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is due primarily to the labor-intensive production process, requiring up to 90% of manual labor. The process of doing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is no more than a third of the whole process. The rest is preparing the image, finalizing and correcting the set, gluing, grinding, oiling and varnishing, etc. Many steps are repeated many times to achieve the best result. Only oil treatment with a subsequent primer and final shellac treatment takes up to 7 days.

Marquetry panel. Glass of wine Work in the technique of marquetry, the size of the frame is 28x21 inches (72x52 cm). When creating the work, we used veneer, American walnut, koto, olive ash, Gabon, paduk, maple, makore. Frame - sweet cherry, varnish, patination. The work is covered with linseed oil and shellac. The frame is equipped with pendants. It is possible to order under the order in the required sizes. Marquetry is an art set of thin wooden veneers of different colors and textures. Pieces of wood, joining along the edges between themselves, form a solid image, which is then glued to the base. The role of the colors in marquetry is played by the texture and shade of the wood, so the most important task is to determine the composition and artistic skill of the master in order to select and combine the correct veneer fragments. In the marketer's workshop there are hundreds of different types of veneers, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is due primarily to the labor-intensive production process, requiring up to 90% of manual labor. The process of doing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is no more than a third of the whole process. The rest is preparing the image, finalizing and correcting the set, gluing, grinding, oiling and varnishing, etc. Many steps are repeated many times to achieve the best result. Only oil treatment with a subsequent primer and final shellac treatment takes up to 7 days.

Marquetry panel. Glass of wine Panel in the technique of marquetry, the size of the frame is 27x21 inches (68x53 cm). When creating the work, we used veneer, American walnut, koto, olive ash, Gabon, paduk, maple, makore. Frame - colored pine, brash, varnish, patination. The work is covered with linseed oil and shellac. The frame is equipped with pendants. It is possible to order under the order in the required sizes. Marquetry is an art set of thin wooden veneers of different colors and textures. Pieces of wood, joining along the edges between themselves, form a solid image, which is then glued to the base. The role of the colors in marquetry is played by the texture and shade of the wood, so the most important task is to determine the composition and artistic skill of the master in order to select and combine the correct veneer fragments. In the marketer's workshop there are hundreds of different types of veneers, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is due primarily to the labor-intensive production process, requiring up to 90% of manual labor. The process of doing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is no more than a third of the whole process. The rest is preparing the image, finalizing and correcting the set, gluing, grinding, oiling and varnishing, etc. Many steps are repeated many times to achieve the best result. Only oil treatment with a subsequent primer and final shellac treatment takes up to 7 days. It's hard to meet someone who can remain indifferent to such a unique gift. Such gifts become family heirlooms and handed down from generation to generation.

Icon Mother of God Igorevskaya. Panel in the technique of marquetry, size with frame - 25x18 inches ( 62x46 cm). When creating the work, the veneer was oak, wenge, makore, American walnut, sycamore maple, alder, gabon. In the manufacture of used more than 500 veneer fragments of different textures and colors. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame – the colored pine with patina gold. The frame is equipped with suspensions. Customization is possible in the desired sizes. It’s a wonderful and unforgettable gift for beloved people. Such decor does not age and always looks worthy. Fast international delivery - 8 days. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Icon Mother of God of Korsun. Panel in the technique of marquetry, size with frame – 24x19 inches (59x48cm). When creating the work, limba veneer, wenge, macore, American walnut, sycamore maple, alder, gabon were used. According to legend, Ephesus, or Korsunskaya, the icon of the Virgin, was written by St. Apostle Luke and during the life of the Most Holy Mother of God, when she saw her image, said: “Grace of the One who was born of Me and Mine be with this icon”. On October 9, 988, the list from this icon was brought from Korsun to Kiev by the holy Equal-to-the-Apostles Prince Vladimir and was named the Korsun Icon. Later, the icon was moved to Novgorod, and from there to Moscow, to the Kremlin's Assumption Cathedral. In the manufacture of used more than 500 veneer fragments of different textures and colors. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame – the colored pine with patina gold. The frame is equipped with suspensions. Customization is possible in the desired sizes. It’s a wonderful and unforgettable gift for beloved people. Such decor does not age and always looks worthy. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Icon Mother of God Affection. Work in marquetry technique, size with frame – 22х18 inches (58x46cm). When creating the work, the veneers of limba, wenge, makore, American walnut, sycamore maple, anegri, paduk, merbau, gabon, sipo were used. During the manufacture, the master used more than 400 pieces of veneer from 10 different types of wood of different textures and colors. It took more than 30 hours of work of the master to make the work. Frame - tinted pine + brushed + gold patination. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Customization is possible in the desired sizes. Custom work can be frameless. Fast international delivery - 8 days. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Still life vase of flowers Panel in the technique of marquetry, the size of the frame is 33x24 inches (84x60cm). When creating the work, wenge veneer, paduk, American walnut, sycamore maple, oak, cherejera, gabon, sipo were used. In the manufacture of the work, the master combined more than 300 veneer fragments into a single picture. Frame - tinted pine + brushing and patination. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Customization is possible in the desired sizes. Custom work can be without a frame. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Mosaic panel. Church on islands Panel in the marquetry technique, the size of the frame – 32'x22'in (80х55 sm). We used veneer: wenge, macore, american walnut, limba, sycamore maple, gabon, mahogany. The frame is tinted pine, brashing, patina gold. In the manufacture of the work used more than 700 veneer fragments of different colors. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame - tinted pine, marquetry, patination in gold color. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Custom order is possible in the desired sizes. Custom order can be without a frame. Note! Our product does not use paints! Our products are going to handmade from pieces of different color wood veneer. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Marquetry panel. Shih Tzu Panel in the technique of marquetry, size with frame - 22x22 inches (55x55 cm). When creating the work, wenge veneer, American walnut, sycamore maple, white ash, mahogany, gabon, and sweet cherry were used. More than 400 individual veneer fragments are connected by the master in a single picture. Frame - tinted pine, brushing, patination. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Customization is possible in the desired sizes. We accept orders for the manufacture of pet portraits according to your photos. Custom work can be without a frame. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish with a subsequent primer and a final finish with shellac lacquer takes up to 7 days.

Marquetry panel. Shepherd dog . Work in the technique of marquetry, size with a frame – 25х17 inches (63x43 cm). When creating the work, wenge veneer, paduk, American walnut, sycamore maple, ash, mahogany, gabon, and sweet cherry were used. Frame is the tinted pine, brushing, patination. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Custom order is possible in the desired sizes. We accept orders for the manufacture of pet portraits according to your photos. Custom order can be without a frame. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Schooners at sunset. Panel in marquetry technique, size with frame - 35x35 inches(90x90 cm). Wenge veneer, makore, American walnut, ash, sycamore maple, alder, gabon, sipo were used in the creation of the work. Over 600 pieces of veneer of different shades were used in the manufacture of the work. Frame - tinted pine + patina red gold. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Customization is possible in the desired sizes. Custom work can be without a frame. Fast international delivery - 8 days. Marquetry is an artistic set of thin wooden plates (veneer) of various colors and textures. Pieces of wood, docking along the edges with each other, form a complete picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of wood, therefore the most important task is to determine the composition and the artistic skill of the master to select and combine the correct fragments of veneer. There are hundreds of different types of veneer in the shop of a marketer, from black to almost white, and the same wood in different areas can have different shades. The high cost of the finished product is primarily due to the laborious manufacturing process that requires up to 90% of manual labor. A job measuring 40x60 cm can take 2-3 weeks of work by a master. The process of performing work is quite complex and includes many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the entire process. The rest is preparation of the image, revision and correction of the set, gluing, sanding, finishing with oils and varnish, etc. Many steps are repeated many times to achieve a better result. Oil finishing alone followed by priming and finishing with shellac lacquer takes up to 7 days

Work in the marquetry technique, the size of the frame – 23'x20'in (59х50 sm). We used veneer: limba, wenge, makor, american walnut, maple sycamore, koto, gabon. The icon is solid panel without frame. The work is covered with linseed oil and shellac. Customization is possible in the desired sizes. Work on the custom order can be with a frame. Nicholas the Wonderworker is the most revered of the saints after the Virgin. He performed with his earthly life and still performs miracles, helps people, responds to various pleas and requests for help. God the Blessed Nicholas helps the travelers (once the saint with the help of prayers was able to pacify a storm at sea that almost sank the ship). The saint is asked for a successful marriage of his daughters (Acts of the three girls - he secretly donated money to his father for the dowry, thereby greatly helping him — saved the family from disgrace). The saint was a deliverer from vain death, reconciled his enemies, defended innocently condemned people. Saint Nicholas helps in healing from diseases, he is prayed for the welfare and preservation of peace in the family, for the intercession of children. He assists in getting rid of poverty and in many difficult life situations. Note! Our product does not use paints! Our products are going to handmade from pieces of different color wood veneer. Do you want to make an unforgettable impression to your close one? Make a present of the painting, executed in a delightful old technique of marquetry. This is an art of creating wooden pictures. There are used different in color and texture pieces of wood veneer instead of paints in these pictures. Order us a copy of your favorite landscape or pictures. The original Wall Hanging is a perfect gift or decor of your walls. The original image can be used as a digital reproduction of the picture, and any pictures from the Internet The painting is a completely organic and ecological, because we use natural wood to create it. For finishing there used linseed oil and shellac - an organic lacquer, that perfectly emphasize the depth and texture of wood veneer. These wares are nice to hold in hands, because they retain the warmth and appeal of a living tree. In addition, depending on the lighting the portrait will exude its own unique light, like a jewel. You'd be surprised how unusual and attractive look paintings remake us in the tree. It's hard to meet someone who can remain indifferent to such a unique gift. Such gifts become family heirlooms and handed down from generation to generation

Saint Alexander Nevsky. Work in the technique of marquetry. The size with the frame is 24x21 in (60x53 cm). When creating the work, we used veneer wenge, makore, American walnut, limba, sycamore maple, gabon, mahogany. In the manufacture of used more than 400 veneer fragments of different textures and colors. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame – the colored pine with patina gold. The frame is equipped with suspensions. Customization is possible in the desired sizes. It’s a wonderful and unforgettable gift for beloved people. Such decor does not age and always looks worthy. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Marquetry panel. Sailing boat at sunset. Panel in marquetry technique, size with frame - 35x22 inches. Wenge veneer, makore, American walnut, ash, sycamore maple, alder, gabon, anegri, sipo, mahogany were used in the creation of the work. Over 800 pieces of veneer of different shades were used in the manufacture of the work. Frame - solid wood cherry and shellac. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Customization is possible in the desired sizes. Custom work can be without a frame. Fast international delivery - 8 days Marquetry is an artistic set of thin wooden plates (veneer) of various colors and textures. Pieces of wood, docking along the edges with each other, form a complete picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of wood, therefore the most important task is to determine the composition and the artistic skill of the master to select and combine the correct fragments of veneer. There are hundreds of different types of veneer in the shop of a marketer, from black to almost white, and the same wood in different areas can have different shades. The high cost of the finished product is primarily due to the laborious manufacturing process that requires up to 90% of manual labor. A job measuring 40x60 cm can take 2-3 weeks of work by a master. The process of performing work is quite complex and includes many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the entire process. The rest is preparation of the image, revision and correction of the set, gluing, sanding, finishing with oils and varnish, etc. Many steps are repeated many times to achieve a better result. Oil finishing alone followed by priming and finishing with shellac lacquer takes up to 7 days

Mosaic vintage panel. Two roses flowers Work in the inlay technique, size – 19x10 inches(49x25 cm). When creating the work, was used the veneer sapele, koto, wenge, gabon, oak, mahogany, limba. About 200 individual pieces of veneer were assembled by the master into a single image. The creation of the panel took at least 10 hours of work of the master. The work is covered with linseed oil and shellac. The panel is equipped with suspensions. Customization is possible in the desired sizes. Fast shipping - about 8 days. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc.

Mosaic panel. Rose in a glass Work in the technique of marquetry, size with a frame – 32x18 inches (80x46 cm). When creating the work, we used veneer shejeira, olive ash, gabon, paduk, maple, and makore. Frame - tinted pine, brushing, patination in gold color. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Custom order is possible in the desired sizes. In the manufacture of the work, the master combined more than 300 veneer fragments into a single picture. We accept orders for the manufacture of pet portraits according to your photos. Custom order can be without a frame. Fast international delivery - 8 days. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Mosaic vintage panel. Rose in black Panel in the marquetry technique, the size of the frame – 26'x15'in (67х39 sm). We used veneer: limba, wenge, makor, american walnut, maple sycamore, koto, gabon. The frame is sweet cherry, shellac finishing. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Customization is possible in the desired sizes. Work on the custom order can be without a frame. Fast international shipping - 10 days. Note! Our product does not use paints! Our products are going to handmade from pieces of different color wood veneer. Do you want to make an unforgettable impression to your close one? Make a present of the painting, executed in a delightful old technique of marquetry. This is an art of creating wooden pictures. There are used different in color and texture pieces of wood veneer instead of paints in these pictures. The painting is a completely organic and ecological, because we use natural wood to create it. For finishing there used linseed oil and shellac - an organic lacquer, that perfectly emphasize the depth and texture of wood veneer. These wares are nice to hold in hands, because they retain the warmth and appeal of a living tree. In addition, depending on the lighting the portrait will exude its own unique light, like a jewel. You'd be surprised how unusual and attractive look paintings remake us in the tree. It's hard to meet someone who can remain indifferent to such a unique gift. Such gifts become family heirlooms and handed down from generation to generation.

Marquetry panel. Pomeranian puppy. Work in the technique of marquetry, size with a frame – 22,5х22,5 inch (57x57 cm). When creating the work, wenge veneer, american walnut, sycamore maple, ash, mahogany, gabon, sipo, palisandr and sweet cherry were used. Frame is the tinted pine, brushing and patination. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Custom order is possible in the desired sizes. We accept orders for the manufacture of pet portraits according to your photos. Custom order can be without a frame. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Icon of the Mother of God of Kazan. Work in the technique of marquetry, size with frame - 21x18.5 inches (53x46cm). When creating the work, limb veneer, wenge, makore, American walnut, sycamore maple, koto, gabon were used. Frame - tinted pine + brushing + patina gold. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Manufacturing to order in the desired sizes is possible. Custom work can be without a frame. New. It is made to order. Production time 30 days Fast international shipping - 8 days Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Memory Panel 10x12 cm without frame.  Order your pet portrait in marquetry technique! Pets seem to come to life in the work of marquetry. The special refraction of light in the fibers of the wood texture and the extraordinary heat of the material are best manifested in close-ups. It can be a cat, a dog, a parrot or even a turtle. Any of your creatures can be displayed by us in a tree. The size of the work, the option of the border and the framework and the final cost, we stipulate in the correspondence. Of course, work in the technique of marquetry has always been and remains quite expensive today. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. A job measuring 60x90 cm may require more than 100 hours of work for the master. At the same time, to assemble the mosaic set of cut elements itself is only not more than a third of the whole process. Most of the time is required for preparing images in software graphic editors, cutting, gluing, grinding, refinement and correction, a set of finishing with oils and varnishes, etc. Many stages are repeated many times to achieve a better result. Only the final varnish finish can last a week. The term for making a portrait is 3-4 weeks. The veneer painting you have received will be ready for installation on the wall. Note that the minimum size of the finished work with the frame is 20x20 inches for a square picture and 24x17 inches for a rectangular one. The cost of such work is 110 dollars without the cost of delivery. A larger size entails an increase in value. The delivery cost is negotiated separately based on your preferences. On average, this is $ 40 and 3-4 weeks of time. Faster delivery is possible, but it is also more expensive.

Mosaic vintage panel. Magnolia flowers Work in the inlay technique, size – 19x10 inches(49x25 cm). When creating the work, was used the veneer sapele, koto, wenge, gabon, oak, mahogany, limba. About 200 individual pieces of veneer were assembled by the master into a single image. The creation of the panel took at least 10 hours of work of the master. The work is covered with linseed oil and shellac. The panel is equipped with suspensions. Customization is possible in the desired sizes. Fast shipping - about 10 days. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc.

Lovers in the rain. Panel in the technique of marquetry, the size with the frame is 30x22 inches (75x55cm). When creating the work, we used veneer wenge, makore, American walnut, ash, maple sycamore, alder, gabon, sipo. In the manufacture of the work used more than 300 veneer fragments of different colors. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame - tinted pine, marquetry, patination in gold color. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Custom order is possible in the desired sizes. Custom order can be without a frame. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.