Panel in the technique of marquetry, size with frame - 78x56 cm. When creating the work, we used veneer wenge, mahogany, American walnut, limba, sycamore maple, alder, gabon, ash. . More than 450 single pieces of veneer are combined by artist into a single picture. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame - a solid wood lined with eco leather. The frame is equipped with suspensions. Customization is possible in the desired sizes. This is the wonderful and unforgettable gift for people close to you. Such decor does not age and always looks worthy. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. Work on a size of 40x60 cm can take 2-3 weeks of the master's work. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish with a subsequent primer and a final finish with shellac lacquer takes up to 7 days.

Panel in the technique of marquetry, size with a frame – 21х21 inches (55x55 cm). When creating the work, wenge veneer, spectacle poplar, American walnut, sycamore maple, white ash, mahogany, gabon, and sweet cherry were used. Frame - tinted pine, brushing, patination. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. Custom order is possible in the desired sizes. We accept orders for the manufacture of pet portraits according to your photos. Custom order can be without a frame. Fast international delivery - 8 days. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Panel in the marquetry technique (inlay), size with a frame - 23x23 inches. When we were creating the work - wenge veneer, American walnut, sycamore maple, rosewood, white ash, and cherry were used. Frame - tinted pine, brushed, patina. The work is covered with linseed oil and shellac. The frame is equipped with suspensions. We accept orders for the production of portraits of pets according to your photos. Customization is possible in the desired sizes. Custom work can be without a frame. It contains about 300 details and about 10 types of veneer. Note! Our product does not use paints or burn! Our products are going to handmade from pieces of different color wood veneer. Fast international delivery - 8 days Marquetry is an artistic set of thin wooden plates (veneer) of various colors and textures. Pieces of wood, docking along the edges with each other, form a complete picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of wood, therefore the most important task is to determine the composition and the artistic skill of the master to select and combine the correct fragments of veneer. There are hundreds of different types of veneer in the shop of the marketer, from black to almost white, and the same wood in different areas can have different shades. The high cost of the finished product is primarily due to the laborious manufacturing process that requires up to 90% of manual labor. The process of performing the work is quite complex and includes many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the entire process. The rest is preparation of the image, revision and correction of the set, gluing, sanding, finishing with oils and varnish, etc. Many steps are repeated many times to achieve a better result. Oil finishing alone followed by priming and finishing with shellac lacquer takes up to 7 days.

Marquetry panel. Basenji dog. Work in the technique of marquetry, size with a frame – 21,5 х 21,5 inch (54x54 cm). When creating the work, we used veneer wenge, American walnut, koto, olive ash, gabon, sipo, rosewood, maple, mahogany. We accept orders for the manufacture of pet portraits according to your photos. Frame – the colored pine with patina gold. More than 400 single pieces of veneer are combined by artist into a single picture. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. The frame is equipped with suspensions. Customization is possible in the desired sizes. A wonderful and unforgettable gift for people close to you. Such decor does not age and always looks worthy. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Memory Panel 10x12 cm without frame.  Order your pet portrait in marquetry technique! Pets seem to come to life in the work of marquetry. The special refraction of light in the fibers of the wood texture and the extraordinary heat of the material are best manifested in close-ups. It can be a cat, a dog, a parrot or even a turtle. Any of your creatures can be displayed by us in a tree. The size of the work, the option of the border and the framework and the final cost, we stipulate in the correspondence. Of course, work in the technique of marquetry has always been and remains quite expensive today. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. A job measuring 60x90 cm may require more than 100 hours of work for the master. At the same time, to assemble the mosaic set of cut elements itself is only not more than a third of the whole process. Most of the time is required for preparing images in software graphic editors, cutting, gluing, grinding, refinement and correction, a set of finishing with oils and varnishes, etc. Many stages are repeated many times to achieve a better result. Only the final varnish finish can last a week. The term for making a portrait is 3-4 weeks. The veneer painting you have received will be ready for installation on the wall. Note that the minimum size of the finished work with the frame is 20x20 inches for a square picture and 24x17 inches for a rectangular one. The cost of such work is 110 dollars without the cost of delivery. A larger size entails an increase in value. The delivery cost is negotiated separately based on your preferences. On average, this is $ 40 and 3-4 weeks of time. Faster delivery is possible, but it is also more expensive.

Mosaic panel. Emotions 3.5 Work in the technique of marquetry, size with frame – 30х30 inches (75x75 cm). When creating the work, we used veneer wenge, koto, white ash, gabon, paduk, maple, mahogany. Frame - toned ash, varnish, patination. In the manufacture of used more than 350 veneer fragments of different textures and colors. The surface of the painting is covered with environmentally friendly linseed oil and shellac. The finished product required more than 30 hours of work by the artist. The frame is equipped with suspensions. Custom work can be without a frame. Manufacturing to order in the desired sizes is possible. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the time-consuming manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Mosaic panel. Emotions 3.7 Work in the technique of marquetry, the size with the frame is 28х15 inches (72x38 cm). When creating the work, we used veneer venge, mahogany, paduk, oak, sycamore maple, makore, alder, gabon, white ash. Frame - tinted ash. The frame is equipped with suspensions. The work is covered with linseed oil and shellac. In the manufacture of the work, the author used more than 10 different types of veneers. About 400 veneer fragments of various wood species are connected by masters in one image. The production of work required at least 25 hours of work of the master. Customization is possible in the desired sizes. We accept orders for the manufacture of portraits in this technique according to your photos. Marquetry is an artistic set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. A work size of 40x60 cm may take 2-3 weeks of the master. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish with a subsequent primer and a final finish with shellac lacquer takes up to 7 days.

Marquetry panel. Emotion 3.4 Work in the technique of marquetry, the size with the frame is 35x25 inches (88x63 cm). When creating the work, wenge veneer, American walnut, koto, olive ash, gabon, paduk, maple, mahogany were used. More than 400 single pieces of veneer are combined by artist into a single picture. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame makes from sweet cherry wood. The frame is equipped with suspensions. Customization is possible in the desired sizes. This is the wonderful and unforgettable gift for people close to you. Such decor does not age and always looks worthy. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden veneers of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. In the marketer's workshop there are hundreds of different types of veneer, from black to almost white, and the same tree in different areas can have different shades. The high cost of the finished product is primarily due to the labor-intensive manufacturing process, requiring up to 90% of manual labor. The process of performing the work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Mosaic panel. Emotions 4.2 Work in the technique of marquetry, the size with the frame is 33х21 inches (83x53 cm). When creating the work, veneer wenge, mahogany, sipo, limba, sycamore maple, alder, gabon, white ash were used. Frame - sweet cherry, equipped with suspensions. The work is covered with linseed oil and shellac. Frame - sweet cherry, equipped with suspensions. More than 350 single pieces of veneer are combined by artist into a single picture. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame makes from cherry wood. The frame is equipped with suspensions. Customization is possible in the desired sizes. This is the wonderful and unforgettable gift for people close to you. Such decor does not age and always looks worthy. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Mosaic panel. Emotions 4.1 Work in the technique of marquetry, the size with the frame is 31.5x23 inches (79x57 cm). When creating the work, veneer wenge, mahogany, sipo, limba, sycamore maple, alder, gabon, white ash were used. More than 400 single pieces of veneer are combined by artist into a single picture. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame makes from sweet cherry wood. The frame is equipped with suspensions. Customization is possible in the desired sizes. This is the wonderful and unforgettable gift for people close to you. Such decor does not age and always looks worthy. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Mosaic panel. Emotions 1.1 Work in the technique of marquetry, size with frame - 31x27 inches (78x67 cm). When creating the work, veneer wenge, mahogany, American walnut, fineline rosewood, sycamore maple, alder, gabon, ash were used. More than 400 single pieces of veneer are combined by artist into a single picture. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame - a solid wood lined with eco leather. The frame is equipped with suspensions. Customization is possible in the desired sizes. This is the wonderful and unforgettable gift for people close to you. Such decor does not age and always looks worthy. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.

Mosaic panel. Emotions 1.2 Work in the technique of marquetry, size with frame - 29x23 inches (72x57 cm). When creating the work, veneer wenge, mahogany, American walnut, fineline rosewood, sycamore maple, alder, gabon, ash were used. More than 400 single pieces of veneer are combined by artist into a single picture. The surface of picture is covered with eco friendly linseed oil and shellac. The finished product required more than 30 hours of artist work. Frame - a solid wood lined with eco leather. The frame is equipped with suspensions. Customization is possible in the desired sizes. This is the wonderful and unforgettable gift for people close to you. Such decor does not age and always looks worthy. We have not yet met people indifferent to such a gift. We revive the ancient art of Marquetry and give it a new modern look. Marquetry is an art set of thin wooden plates (veneers) of various colors and textures. Pieces of wood, docking along the edges between each other, form an integral picture, which is then glued to the base. The role of paints in marquetry is played by the texture and shade of the tree, so the most important task is to determine the composition and artistic skill of the master to choose and combine the right veneer fragments. The high cost of the finished product is due primarily to the laborious manufacturing process, requiring up to 90% of manual labor. The process of performing work is quite complicated and involves many related operations. At the same time, assembling the mosaic set itself is only no more than a third of the whole process. The rest is the preparation of the image, refinement and correction of the set, gluing, grinding, finishing with oils and varnish, etc. Many stages are repeated many times to achieve a better result. Only an oil finish followed by a primer and a final shellac finish takes up to 7 days.