Phones, Electronics & Radios

4 x IN-12B + 4 x SOCETS + 4 x Drivers K155ID1 NEW NIXIE TUBES NIXIE CLOCK F/SH NEW NIXIE TUBES  BRAND NEW! CHEAP! BEST FREE SHIPPING   Payment Details:     We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal. IN-12A D e s c r i p t i o n Nixies is made in USSR. New, old stock. Rare, not produce now IN-12 is The cold cathode of these devices has the form of Arabic numbers from 0 to 9  This listing is for  4 x IN-12A + 4 x SOCETS + 4 x Drivers K155ID1 Tube size: 19mm x 55mm (0.76” x 2.2”) Symbol height: 18mm (0.72”) Supply voltage: 170V Working current: 2.5mA Electrical parameters Brightness >=100cd/m^2 Angle of visibility >= 90 deg Power supply voltage >= 200 V Discharge appearance voltage Discharge voltage: Display current Operations current: Running from DC 4 - 7 mA Running from AC with 50 Hz (average value) 2 - 4 mA Life time >= 5000 hours      The clock on the discharge indicator IN- 12 Previously, these indicators are widely used for displaying digital information in measuring instruments , etc. , but now the urgency of this decision is questionable, however , studied an appropriate topic of our forum and ran according to the links in it , was made a willful decision to pile on the basis of the monk watches ... What, in your spare time from the basic lessons , and it was slowly realized. Some sort of structural scheme of the device shown in the picture:   I n the diagram, the red arrows show the data bus , and blue - power supply units. Hours can be powered from several independent sources, which are isolated by using Schottky diodes with a low drop- D1-D6. As an input to the first power supply is installed MOLEX connector that allows you to use a computer power supply , the second input is designed as a conventional coaxial DC / DC jack , and the third source is the AC / DC converter circuit is courtesy of my colleague (unfortunately , it does not registered on the forum) and is presented below:   he scheme is simple, but there are nuances: a diode VD1 - fast (if you use the chip IR2153D it is not required), suppressor VD4 and VD15 are necessary to protect the rectifier diodes, if they are selected without a large supply of voltage. Transformer Tp2 made three put together ferrite rings size 20h12h6 2000NN: primary winding contains 70 turns of 0.3mm, low-power secondary winding (for supply IR2153) - 2 sections of 7 turns of the same wire (two wires dangle, then the beginning of one wire is connected with the end of the other and get the average point - as usual), a powerful secondary winding - 2 Section 7 turns of three wires braid 0.5mm (6 wires shakes, then divide in half, etc. - as well as with low-power). Do not forget the interlayer insulation! Radiators for transistors for power to 15-17 watts is required, though the board provides a place for them. Resistor R1 represents three series-connected resistor to 100k each. Input filter: TP1 and capacitors C1 and C2 - is taken as is from the ATX power supply, inductor L3 is wound on the ring of the output inductor of the same power supply (simply wrapped wire MGTF in a single layer - much climbed, but can be up and ready again to take .. .) For definiteness, assume that after the diode junction voltage is 12V. For the digital supply voltage must be 5V clock, which is obtained from the 12V with a pulsed DC / DC converter, which was built based on the chip TL2575-05 from Texas Instr.:   To supply the gas-discharge indicators require a high voltage source of the order of 200V needed for ignition and maintain a stable level in the indicator . Upconverter 12 - > 200V is made on a chip MAX1771:   In the high-voltage part of the circuit elements should be used to withstand appropriate voltage. Divider formed by resistors R2, R3 and variable resistor sets the output voltage, which can be adjusted within certain limits. In my case, the output voltage is 190V, which is sufficient for the indicators. Inverter power is sufficient for simultaneous operation of all six indicators. I advise you to be careful when debugging: 200V - high voltage, and even isolation from the mains is present, and the power converter is not great, he was pounding on the paws quite well ... Structurally, these DC / DC converters to save space and for a number of other considerations presented in the form of individual vertical circuit boards and soldered to the motherboard clock: On the left - a 5-volt converter to the right - increases. The decoder is used to convert the data stream it receives from the MC, to a form suitable for display on the display. The scheme of the decoder along with the display shown in the figure: To display data on the display are loaded in four series-connected 74NS595 register. In the last register in the chain store data corresponding to the decimal point of the display, its output is directly controlled high-voltage switches Q1-Q6, which, in turn, ignite or extinguish the appropriate decimal point. Younger 4 digits of the other three registers contain the binary code that corresponds to the odd character cells display (1, 3, 5), and senior nibbles - even (2, 4, 6). This code is supplied to the inputs of the binary-decimal decoder with a high yield K155ID1 that control directly to the indicators. In the plate circuit of each indicator is set current-limiting resistor. Since the current is much smaller than the current point of any of the digits of the indicator in the chain of reservoirs "point" of transistors installed additional resistors. Thus, because the register is only updated by the team manager of MK and changes occur only on certain lines of data, we have actually a static display, although the update of the display is 20 times per second. The block itself consists of the microcontroller MC, real-time clock M41T80M6 from STMicroelectronics, USB FT232BM module for communication with a PC drive level RS-232 interface chip MAX232 for the same purpose, and control buttons. The scheme of all this happiness, as usual, is shown in Fig.   USB module to the FT232BM is a separate fee, vertically soldered into the main . Module is assembled on the template except for the missing chip EEPROM:   At the same time can only run one of the COM interfaces or USB, with preference given to USB, because switching is realized by means of the relay, energized from the connector USB: sticking with cable relay will spread and go to the controller data from the module FT232. RS232 можно почитать в этой статье, а по секрету скажу, что в конечной версии часов стоит такой преобразователь на TUSB3410, но все сказанное относительно приоритетов интерфейсов справедливо и для него..">Generally, the interface converter USB RS232 can be found in this article, and tell you a secret that in the final version of the clock is a converter on the TUSB3410, but it has been said about the priorities of interfaces is true for him .. Structurally, the building designed in hours on the computer CD-ROM and consist, as already noted, several of the boards. The whole area of the body is the main circuit board that is mounted inside the housing to regular seats, the rest of the "native" card CD-ROM. It installed a network power supply, a microcontroller with a clock, all necessary connectors and a part of the decoder chip. The rest of the decoder chip mounted on a separate board that is installed on the main board, second floor. The power modules vertically soldered to the main board. The back panel connectors are installed between the 4 buttons that serve to adjust the hours and mode selection. This is how it all vygyadelo during debugging:   It is connected only to additional charges decoder , the main board yet. Fully assembled board clock:   Thus, the constructs with little understood, now a few words about the firmware. Controller - ATMega8515. Such a choice is made only because they have me. In principle, the code is easily ported to ATMega16 (only need to remove the definition of port E, and a couple of nuances). The controller reads data from the chip through the RTC bus I2C, engaged in loading data into registers, monitors the status of the buttons and listen to UART - as a whole, all as always. Clock can display the actual time (in HH: MM: SS or HH: MM), the date in the format DD: MM: YY, start counting seconds: SS, have an alarm clock, and can also be used to display numerical information flowing through a COM or USB. Control is the buttons, as already mentioned, the rear of the enclosure. For each button you can "hang" the implementation of four functions called short or long pressing on the pressing 1, 2 or 3 seconds. Long pressing the supported one, two or three short beeps, respectively. The functions assigned to the buttons as follows: A. Pressing 1 on 1s - to set an alarm clock. The screen displays the current alarm set time, the discharge hour is flashing. Buttons 3 and 4 are used to decrease / increase the reading, the new value is confirmed by pressing a buzzer and then starts flashing digit minutes, setting the value of which is similar. If you do not perform any action after the entrance to the installation procedure, after a while the clock returns to native mode. Two. Pressing 1 for 2c - Set time and date in the following order: hour, minute, year, month, day. Setup is similar. Three. Clicking on a 3s - Service settings: Mode display the time (1 or 2 - HH: MM: SS or HH: MM), the show dates, in seconds, time display of data from your PC in seconds (unless within that time the PC is not new data arrive, the clock will return to the main mode) 4. Short press button 2 - showing the date for the time configured in the service menu, and then clock back to normal Five. Short press the 3 button - on / off mode of the second point: the screen shows only a second. 6. Pressing 3 for 1s - on / off indication. 7. Pressing 4 on 1s - on / off alarm clock (with alarm clock in the senior category displayed decimal point). All settings are stored either in volatile memory chip clock, or in non-volatile memory IC, so that when power is saved. When the alarm buzzer will sound for as long as you press any button. ">

I did not check this radio for operability.  I do not know how it works.  See photos . click the ADD TO CART BUTTON start YOUR OWN exclusive collection click the ADD TO CART BUTTON below before prices rise! I still do not have a big rating, but I'm vying for delivery and honesty. You transfer the money to my intermediary, who gives them to me. After you receive the goods.   Payment:   I accept PayPal only. If you don't have PayPal account and would like to pay with your Credit Card, check this step-by-step tutorial on PayPal: https://www.paypal.com/webapps/mpp/pay-online Your order will be shipped only after the payment is cleared.   I combine shipping I selling this AS IS working condition unknown.  I do not check for and do not know if there is any issues that are not visible on outer case All my items are sold in as shown condition I do not know if they will work and do not guarantee them to work once received they are SOLD AS IS You have collectible item that increase in value over time & perfect gift idea as well Each my item will be very carefully packaged and shipped after payment has been cleared. I ship worldwide by reliable carrier providing a tracking number. If you have any questions or require further information concerning the item, feel free to contact me. Thanks so much for taking the time to come over.

Explore elegance and functionality with our Remarkable 2 Case - a tailored folio designed for your Remarkable 2 tablet. Crafted from premium Crazy Horse leather, this minimalist Remarkable 2 folio provides reliable protection and a touch of sophistication in your daily routine. Whether you seek a Remarkable 2 sleeve or a complete folio solution, our handcrafted designs cater to your needs. The interior, lined with artificial felt, safeguards against scratches, while the dedicated holder for the Remarkable 2 stylus ensures added convenience. Secure your device with the holster clasp, making this Remarkable 2 case an essential blend of style and practicality. You can add a personal touch to the leather cover by ordering an individual heat embossing or laser engraving. A custom Remarkable case would make a perfect lawyer gift, a great 10 year anniversary gift for husband and wife, an 8th anniversary gift, or an excellent present for any other special occasion. This accessory will keep your device safe, secure, and stylish for many years to come. ✔️ Why do you have to buy our Remarkable case with pencil holder? ⭐️ Slim and lightweight design. ⭐️ Perfect fitting to Remarkable. ⭐️ High-quality and durability. ⭐️ Possibility of personalization. ⭐️ Multiple color options. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Free personalization is available in my Etsy store, ensuring a unique and tailored experience for each customer without any extra charges ❤️ ✔️ Delivery during the war We're able to make & ship your orders within 3 business days. Delivery will take 2-4 weeks depending on your location. We have also Express Delivery via DHL they'll deliver within 1-2 weeks. In the Oakland Remarkable 2 sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Leather iPad Case with Pencil Holder, Personalized iPad Pro 12.9 Case, Leather iPad Mini 6 Case, 6th Anniversary Gift, 2nd Anniversary Gift Description The Leather iPad Case with Pencil Holder is a minimalist and practical accessory that lets you easily take your iPad wherever you go. It not only offers reliable protection for your device but also adds a touch of elegance to your daily routine. Made from high-quality Crazy Horse leather, the cover is designed to fit gadgets perfectly. We handcraft them for various models of iPad Mini, Air, and Pro. Therefore, you can choose an iPad Pro 12.9 case, a leather iPad Mini 6 case, or a cover for devices with other screen sizes. The case's interior is lined with artificial felt, which prevents scratches and damage to iPad's screen. The product also features a special holder for Apple Pencil. The main compartment and a pencil holder are closed with a holster clasp. You can add a personal touch to the leather cover by ordering an individual heat embossing or laser engraving. A custom iPad case would make a perfect lawyer gift, a great 10 year anniversary gift for husband and wife, an 8th anniversary gift, or an excellent present for any other special occasion. This accessory will keep your device safe, secure, and stylish for many years to come. ✔️ Why do you have to buy our iPad Air case with pencil holder? ⭐️ Slim and lightweight design. ⭐️ Perfect fitting to iPad. ⭐️ High-quality and durability. ⭐️ Possibility of personalization. ⭐️ Multiple color options. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add an individual heat embossing or laser engraving to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days. In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Leather iPad Case with Pencil Holder, Personalized iPad Pro 12.9 Case, Leather iPad Mini 6 Case, 6th Anniversary Gift, 2nd Anniversary Gift Description The Leather iPad Case with Pencil Holder is a minimalist and practical accessory that lets you easily take your iPad wherever you go. It not only offers reliable protection for your device but also adds a touch of elegance to your daily routine. Made from high-quality Crazy Horse leather, the cover is designed to fit gadgets perfectly. We handcraft them for various models of iPad Mini, Air, and Pro. Therefore, you can choose an iPad Pro 12.9 case, a leather iPad Mini 6 case, or a cover for devices with other screen sizes. The case's interior is lined with artificial felt, which prevents scratches and damage to iPad's screen. The product also features a special holder for Apple Pencil. The main compartment and a pencil holder are closed with a holster clasp. You can add a personal touch to the leather cover by ordering an individual heat embossing or laser engraving. A custom iPad case would make a perfect lawyer gift, a great 10 year anniversary gift for husband and wife, an 8th anniversary gift, or an excellent present for any other special occasion. This accessory will keep your device safe, secure, and stylish for many years to come. ✔️ Why do you have to buy our iPad Air case with pencil holder? ⭐️ Slim and lightweight design. ⭐️ Perfect fitting to iPad. ⭐️ High-quality and durability. ⭐️ Possibility of personalization. ⭐️ Multiple color options. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add an individual heat embossing or laser engraving to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days. In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Leather iPad Case with Pencil Holder, Personalized iPad Pro 12.9 Case, Leather iPad Mini 6 Case, 6th Anniversary Gift, 2nd Anniversary Gift Description The Leather iPad Case with Pencil Holder is a minimalist and practical accessory that lets you easily take your iPad wherever you go. It not only offers reliable protection for your device but also adds a touch of elegance to your daily routine. Made from high-quality Crazy Horse leather, the cover is designed to fit gadgets perfectly. We handcraft them for various models of iPad Mini, Air, and Pro. Therefore, you can choose an iPad Pro 12.9 case, a leather iPad Mini 6 case, or a cover for devices with other screen sizes. The case's interior is lined with artificial felt, which prevents scratches and damage to iPad's screen. The product also features a special holder for Apple Pencil. The main compartment and a pencil holder are closed with a holster clasp. You can add a personal touch to the leather cover by ordering an individual heat embossing or laser engraving. A custom iPad case would make a perfect lawyer gift, a great 10 year anniversary gift for husband and wife, an 8th anniversary gift, or an excellent present for any other special occasion. This accessory will keep your device safe, secure, and stylish for many years to come. ✔️ Why do you have to buy our iPad Air case with pencil holder? ⭐️ Slim and lightweight design. ⭐️ Perfect fitting to iPad. ⭐️ High-quality and durability. ⭐️ Possibility of personalization. ⭐️ Multiple color options. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add an individual heat embossing or laser engraving to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days. In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Our tablet sleeve/case with pencil pocket fits Remarkable 2, iPad Pro 11, Surface Pro 8, 7, 6 and others laptop/tablet models. iPad/Surface/Remarkable sleeve by INCARNE™ with pencil holder. It is made of bull-hide Crazy Horse leather and is lined with synthetic felt. The sleeve is handmade and can be tailored according to your needs. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add personalization to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery during the war Due to the situation in Ukraine, we send your orders only with our National mail operator. This type of shipping can be a little slower than usual. We do our best to make & ship your orders within 1-3 business days ???? In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Our Remarkable 2 Case has a Pencil Holder, which makes it super comfortable to use. Also, we make protective covers for Microsoft Surface Pro 8, Pro 7, Pro 6, Surface Laptop Studio, iPad Pro 11, Mini 8.3, 12.9 and others. Tablet sleeve by INCARNE™ with pencil holder. It is made of bull-hide Crazy Horse leather and is lined with synthetic felt. The case is handmade and can be tailored according to your needs. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add personalization to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery during the war Due to the situation in Ukraine, we send your orders only with our National mail operator. This type of shipping can be a little slower than usual. We do our best to make & ship your orders within 1-3 business days ???? In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Leather iPad Case with Pencil Holder, Personalized iPad Pro 12.9 Case, Leather iPad Mini 6 Case, 6th Anniversary Gift, 2nd Anniversary Gift Description The Leather iPad Case with Pencil Holder is a minimalist and practical accessory that lets you easily take your iPad wherever you go. It not only offers reliable protection for your device but also adds a touch of elegance to your daily routine. Made from high-quality Crazy Horse leather, the cover is designed to fit gadgets perfectly. We handcraft them for various models of iPad Mini, Air, and Pro. Therefore, you can choose an iPad Pro 12.9 case, a leather iPad Mini 6 case, or a cover for devices with other screen sizes. The case's interior is lined with artificial felt, which prevents scratches and damage to iPad's screen. The product also features a special holder for Apple Pencil. The main compartment and a pencil holder are closed with a holster clasp. You can add a personal touch to the leather cover by ordering an individual heat embossing or laser engraving. A custom iPad case would make a perfect lawyer gift, a great 10 year anniversary gift for husband and wife, an 8th anniversary gift, or an excellent present for any other special occasion. This accessory will keep your device safe, secure, and stylish for many years to come. ✔️ Why do you have to buy our iPad Air case with pencil holder? ⭐️ Slim and lightweight design. ⭐️ Perfect fitting to iPad. ⭐️ High-quality and durability. ⭐️ Possibility of personalization. ⭐️ Multiple color options. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add an individual heat embossing or laser engraving to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days. In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Our tablet sleeve/case with pencil pocket fits iPad Pro 11 and others laptop/tablet models. iPad sleeve by INCARNE™ with pencil holder. It is made of bull-hide Crazy Horse leather and is lined with synthetic felt. The sleeve is handmade and can be tailored according to your needs. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add personalization to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days ???? In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Our Remarkable 2 Case has a Pencil Holder, which makes it super comfortable to use. Also, we make protective covers for Microsoft Surface Pro 8, Pro 7, Pro 6, Surface Laptop Studio, iPad Pro 11, Mini 8.3, 12.9 and others. Tablet sleeve by INCARNE™ with pencil holder. It is made of bull-hide Crazy Horse leather and is lined with synthetic felt. The case is handmade and can be tailored according to your needs. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add personalization to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery during the war Due to the situation in Ukraine, we send your orders only with our National mail operator. This type of shipping can be a little slower than usual. We do our best to make & ship your orders within 1-3 business days ???? In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Leather iPad Case with Pencil Holder, Personalized iPad Pro 12.9 Case, Leather iPad Mini 6 Case, 6th Anniversary Gift, 2nd Anniversary Gift Description The Leather iPad Case with Pencil Holder is a minimalist and practical accessory that lets you easily take your iPad wherever you go. It not only offers reliable protection for your device but also adds a touch of elegance to your daily routine. Made from high-quality Crazy Horse leather, the cover is designed to fit gadgets perfectly. We handcraft them for various models of iPad Mini, Air, and Pro. Therefore, you can choose an iPad Pro 12.9 case, a leather iPad Mini 6 case, or a cover for devices with other screen sizes. The case's interior is lined with artificial felt, which prevents scratches and damage to iPad's screen. The product also features a special holder for Apple Pencil. The main compartment and a pencil holder are closed with a holster clasp. You can add a personal touch to the leather cover by ordering an individual heat embossing or laser engraving. A custom iPad case would make a perfect lawyer gift, a great 10 year anniversary gift for husband and wife, an 8th anniversary gift, or an excellent present for any other special occasion. This accessory will keep your device safe, secure, and stylish for many years to come. ✔️ Why do you have to buy our iPad Air case with pencil holder? ⭐️ Slim and lightweight design. ⭐️ Perfect fitting to iPad. ⭐️ High-quality and durability. ⭐️ Possibility of personalization. ⭐️ Multiple color options. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add an individual heat embossing or laser engraving to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days. In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Our Green Remarkable 2 Case has a Pencil Holder, which makes it super comfortable to use. Also, we make protective covers for Microsoft Surface Pro 8, Pro 7, Pro 6, Surface Laptop Studio, iPad Pro 11, Mini 8.3, 12.9 and others. Tablet sleeve by INCARNE™ with pencil holder. It is made of bull-hide Crazy Horse leather and is lined with synthetic felt. The case is handmade and can be tailored according to your needs. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add personalization to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery during the war Due to the situation in Ukraine, we send your orders only with our National mail operator. This type of shipping can be a little slower than usual. We do our best to make & ship your orders within 1-3 business days ???? In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Our Remarkable 2 Case has a Pencil Holder, which makes it super comfortable to use. Also, we make protective covers for Microsoft Surface Pro 8, Pro 7, Pro 6, Surface Laptop Studio, iPad Pro 11, Mini 8.3, 12.9 and others. Tablet sleeve by INCARNE™ with pencil holder. It is made of bull-hide Crazy Horse leather and is lined with synthetic felt. The case is handmade and can be tailored according to your needs. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add personalization to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery during the war Due to the situation in Ukraine, we send your orders only with our National mail operator. This type of shipping can be a little slower than usual. We do our best to make & ship your orders within 1-3 business days ???? In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Leather iPad Case with Pencil Holder, Personalized iPad Pro 12.9 Case, Leather iPad Mini 6 Case, 6th Anniversary Gift, 2nd Anniversary Gift Description The Leather iPad Case with Pencil Holder is a minimalist and practical accessory that lets you easily take your iPad wherever you go. It not only offers reliable protection for your device but also adds a touch of elegance to your daily routine. Made from high-quality Crazy Horse leather, the cover is designed to fit gadgets perfectly. We handcraft them for various models of iPad Mini, Air, and Pro. Therefore, you can choose an iPad Pro 12.9 case, a leather iPad Mini 6 case, or a cover for devices with other screen sizes. The case's interior is lined with artificial felt, which prevents scratches and damage to iPad's screen. The product also features a special holder for Apple Pencil. The main compartment and a pencil holder are closed with a holster clasp. You can add a personal touch to the leather cover by ordering an individual heat embossing or laser engraving. A custom iPad case would make a perfect lawyer gift, a great 10 year anniversary gift for husband and wife, an 8th anniversary gift, or an excellent present for any other special occasion. This accessory will keep your device safe, secure, and stylish for many years to come. ✔️ Why do you have to buy our iPad Air case with pencil holder? ⭐️ Slim and lightweight design. ⭐️ Perfect fitting to iPad. ⭐️ High-quality and durability. ⭐️ Possibility of personalization. ⭐️ Multiple color options. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add an individual heat embossing or laser engraving to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days. In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Leather iPad Case with Pencil Holder, Personalized iPad Pro 12.9 Case, Leather iPad Mini 6 Case, 6th Anniversary Gift, 2nd Anniversary Gift Description The Leather iPad Case with Pencil Holder is a minimalist and practical accessory that lets you easily take your iPad wherever you go. It not only offers reliable protection for your device but also adds a touch of elegance to your daily routine. Made from high-quality Crazy Horse leather, the cover is designed to fit gadgets perfectly. We handcraft them for various models of iPad Mini, Air, and Pro. Therefore, you can choose an iPad Pro 12.9 case, a leather iPad Mini 6 case, or a cover for devices with other screen sizes. The case's interior is lined with artificial felt, which prevents scratches and damage to iPad's screen. The product also features a special holder for Apple Pencil. The main compartment and a pencil holder are closed with a holster clasp. You can add a personal touch to the leather cover by ordering an individual heat embossing or laser engraving. A custom iPad case would make a perfect lawyer gift, a great 10 year anniversary gift for husband and wife, an 8th anniversary gift, or an excellent present for any other special occasion. This accessory will keep your device safe, secure, and stylish for many years to come. ✔️ Why do you have to buy our iPad Air case with pencil holder? ⭐️ Slim and lightweight design. ⭐️ Perfect fitting to iPad. ⭐️ High-quality and durability. ⭐️ Possibility of personalization. ⭐️ Multiple color options. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add an individual heat embossing or laser engraving to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days. In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Leather iPad Case with Pencil Holder, Personalized iPad Pro 12.9 Case, Leather iPad Mini 6 Case, 6th Anniversary Gift, 2nd Anniversary Gift Description The Leather iPad Case with Pencil Holder is a minimalist and practical accessory that lets you easily take your iPad wherever you go. It not only offers reliable protection for your device but also adds a touch of elegance to your daily routine. Made from high-quality Crazy Horse leather, the cover is designed to fit gadgets perfectly. We handcraft them for various models of iPad Mini, Air, and Pro. Therefore, you can choose an iPad Pro 12.9 case, a leather iPad Mini 6 case, or a cover for devices with other screen sizes. The case's interior is lined with artificial felt, which prevents scratches and damage to iPad's screen. The product also features a special holder for Apple Pencil. The main compartment and a pencil holder are closed with a holster clasp. You can add a personal touch to the leather cover by ordering an individual heat embossing or laser engraving. A custom iPad case would make a perfect lawyer gift, a great 10 year anniversary gift for husband and wife, an 8th anniversary gift, or an excellent present for any other special occasion. This accessory will keep your device safe, secure, and stylish for many years to come. ✔️ Why do you have to buy our iPad Air case with pencil holder? ⭐️ Slim and lightweight design. ⭐️ Perfect fitting to iPad. ⭐️ High-quality and durability. ⭐️ Possibility of personalization. ⭐️ Multiple color options. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add an individual heat embossing or laser engraving to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days. In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Our Remarkable 2 Case has a Pencil Holder, which makes it super comfortable to use. Also, we make protective covers for Microsoft Surface Pro 8, Pro 7, Pro 6, Surface Laptop Studio, iPad Pro 11, Mini 8.3, 12.9 and others. Tablet sleeve by INCARNE™ with pencil holder. It is made of bull-hide Crazy Horse leather and is lined with synthetic felt. The case is handmade and can be tailored according to your needs. ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add personalization to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery during the war Due to the situation in Ukraine, we send your orders only with our National mail operator. This type of shipping can be a little slower than usual. We do our best to make & ship your orders within 1-3 business days ???? In the Oakland iPad sleeve, there is an additional hole, which allows you to connect the device to a charger without removing it from the case. In sleeves made for other tablet brands, the charging hole is not provided. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.

Новая страница 2 1 x UNICUE ULTRA RARE TUBE VFD USSR   Payment Details:    We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal.     D e s c r i p t i o n Nixies is made in USSR. New, old stock. Rare, not produce now VFD Digit Display tube. This never been used, from the old stock. Indicator displays.   Color green.            Electrical parameters Parameter     rated (nominal) voltage of filament, U 4.5-5,5 pulse (max) voltage anodes-segments, U 36 rated current of grid one sign, mA 10-16 filament, consumption of current (nominal), mA 90-110 Constancy summary current anodes-segments one sign, mA 6-10                  Thanks and good luck! Shipping Details:   Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome!   The payment for shipment is flat for all world: FREE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON   Guarantee of qualitative packing   30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective, I will refund you the price you paid for it or replace it with identical one. Seller-online accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.  

The device is working.The case of the device must be attached to the base. Broken mounts See photos. click the ADD TO CART BUTTON   start YOUR OWN exclusive collection click the ADD TO CART BUTTON below before prices rise! I still do not have a big rating, but I'm vying for delivery and honesty. You transfer the money to my intermediary, who gives them to me. After you receive the goods.   Payment:   I accept PayPal only. If you don't have PayPal account and would like to pay with your Credit Card, check this step-by-step tutorial on PayPal: https://www.paypal.com/webapps/mpp/pay-online Your order will be shipped only after the payment is cleared.     I combine shipping I selling this AS IS working condition unknown.  I do not check for and do not know if there is any issues that are not visible on outer case All my items are sold in as shown condition I do not know if they will work and do not guarantee them to work once received they are SOLD AS IS You have collectible item that increase in value over time & perfect gift idea as well Each my item will be very carefully packaged and shipped after payment has been cleared. I ship worldwide by reliable carrier providing a tracking number. If you have any questions or require further information concerning the item, feel free to contact me. Thanks so much for taking the time to come over.

I can not test this phone for operability.   not tested. You buy what you see in the photo.  See photos. click the ADD TO CART BUTTON   start YOUR OWN exclusive collection click the ADD TO CART BUTTON below before prices rise! I still do not have a big rating, but I'm vying for delivery and honesty. You transfer the money to my intermediary, who gives them to me. After you receive the goods.   Payment:   I accept PayPal only. If you don't have PayPal account and would like to pay with your Credit Card, check this step-by-step tutorial on PayPal: https://www.paypal.com/webapps/mpp/pay-online Your order will be shipped only after the payment is cleared.     I combine shipping I selling this AS IS working condition unknown.  I do not check for and do not know if there is any issues that are not visible on outer case All my items are sold in as shown condition I do not know if they will work and do not guarantee them to work once received they are SOLD AS IS You have collectible item that increase in value over time & perfect gift idea as well Each my item will be very carefully packaged and shipped after payment has been cleared. I ship worldwide by reliable carrier providing a tracking number. If you have any questions or require further information concerning the item, feel free to contact me. Thanks so much for taking the time to come over.

Leather Sleeve for MacBook 2021 / 13 inch MacBook Sleeve / Custom Laptop Case / 15 inch MacBook Pro Cover / Leather Laptop Cover / Free Initials This is a wonderful gift, suitable for different occasions. Minimalist design made of high quality vintage leather. Choose your model and the type of personalization(optional) in the options. Please indicate the correct model of your MacBook before placing an order. You can order a custom sized sleeve but the thickness of the laptop must not be more than 20mm. - Let's talk before you buy. We love to communicate with our customers to ensure the highest possible quality of customer service. PERSONALIZATION We provide a wide range of free personalization options. You can order this product with an individual design: - For free initials, enter initials (1-3 letters). - Free stamp featuring a picture from our collection of 9 stamps. - When ordering a free laser engraving, send me an image or text via chat that you want me to engrave. Size limited to 8cm x 8cm (3.2 "x 3.2"). We can engrave name, quote, customized image / logo. Pictures should be black and white, without color transitions. The font I use for engraving is Times New Roman. Our workshop can custom logo / stamp images up to 8cm x 8cm (3.2"x 3.2"). Since all logos have a different level of difficulty, please contact me before ordering and provide an image so that we can evaluate the possibility of making a cliche. More Leather Accessory designs in the section https://www.etsy.com/shop/LeatherMarketOneBC?ref=seller-platform-mcnav§ion_id=28634209 ABOUT LEATHER We use Full-grain vintage style leather. Scratches and imperfections on it are an inherent feature, which gives leather products rustic look and antique touch. We use no lining in our leather products. Dying method is such that each cowhide has slightly different shade/tint. ----- If you are interested in WHOLESALE purchase ----- Please contact us to receive special prices for the bulk order of our products All our parcels have tracking numbers. Best Regards, Rostislav ♡ Shop with Pleasure at LeatherMarketOneBC ♡

Leather Sleeve for MacBook Air M1 / Flap Case MacBook Pro 16 inch 2019 / 13 inch Laptop Case / 15 inch MacBook Pro 2021 / Free Personalized This is a wonderful gift, suitable for different occasions. Minimalist design made of high quality vintage leather. Choose your model and the type of personalization(optional) in the options. Please indicate the correct model of your MacBook before placing an order. You can order a custom sized sleeve but the thickness of the laptop must not be more than 20mm. - Let's talk before you buy. We love to communicate with our customers to ensure the highest possible quality of customer service. PERSONALIZATION We provide a wide range of free personalization options. You can order this product with an individual design: - For free initials, enter initials (1-3 letters). - Free stamp featuring a picture from our collection of 9 stamps. - When ordering a free laser engraving, send me an image or text via chat that you want me to engrave. Size limited to 8cm x 8cm (3.2 "x 3.2"). We can engrave name, quote, customized image / logo. Pictures should be black and white, without color transitions. The font I use for engraving is Times New Roman. Our workshop can custom logo / stamp images up to 8cm x 8cm (3.2"x 3.2"). Since all logos have a different level of difficulty, please contact me before ordering and provide an image so that we can evaluate the possibility of making a cliche. More Leather Accessory designs in the section https://www.etsy.com/shop/LeatherMarketOneBC?ref=seller-platform-mcnav§ion_id=28634209 ABOUT LEATHER We use Full-grain vintage style leather. Scratches and imperfections on it are an inherent feature, which gives leather products rustic look and antique touch. We use no lining in our leather products. Dying method is such that each cowhide has slightly different shade/tint. ----- If you are interested in WHOLESALE purchase ----- Please contact us to receive special prices for the bulk order of our products All our parcels have tracking numbers. Best Regards, Rostislav ♡ Shop with Pleasure at LeatherMarketOneBC ♡

A vertical leather tablet case is a reliable protection and stylish addition to your gadget. It is meticulously handcrafted by combining three colors of genuine Crazy Horse leather. The colors harmoniously complement each other, creating an original yet elegant design for the tablet sleeve. Inside, the handmade case features a lining made of synthetic felt, which provides perfect tablet protection against scratches and other damages. Additionally, there is an option to connect the laptop charger without removing it from the tablet case. We design leather goods for tablets of all modern brands. It doesn't matter whether you need a iPad Pro 12.9, iPad Pro Sleeve 11, iPad Air 5 – we will craft a product that fits your device perfectly. Also, we can add heat embossing of a logo, name, initials, or a special message to your item. This personalized stylish sleeve will make a perfect present for anyone, whether it's a gift for her or a gift for him. ✔️ Why do you have to buy our tablet sleeve? ⭐️ Beautiful and elegant appearance. ⭐️ The ability to charge the laptop without taking it out of the case. ⭐️ Premium quality and durability. ⭐️ Possibility of personalization. ⭐️ 2 design options: Tree (gray, green, cognac); Elegance (gray, burgundy, blue). ✔️ Personalization ⭐️⭐️⭐️⭐️⭐️ Add an individual heat embossing to your order. Read more: https://www.etsy.com/listing/1157331374/ ✔️ Delivery We do our best to make & ship your orders within 1-3 business days. We produce items in red color from genuine Torro leather. Products in other colors (black, gray, brown, green, blue, burgundy, cognac) are made from Crazy Horse leather. Notice that if the tax has been paid online, you do not need to pay it again. In case of any issues, you can provide the customs office with the invoice confirming the tax payment. Our team is always ready to assist you in resolving these matters.