Vehicle parts and Accessories

Car led door sills Led door sills Mitsubishi Outlander III 2012+ included 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Led door sills Mitsubishi Outlander III 2012+ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit   ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors.  - is what makes our products so beautiful and unique!

Led door sills Led door sills Nissan Patrol Y62 2010+ with logo NISMO included 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Led door sills Nissan Patrol Y62 2010+ Nismo 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit   ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Led door sills Jeep Grand Cherokee IV 2010-2021 with logo JEEP RS Custom are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone:  Door sills Jeep Grand Cherokee IV 2010-2021  ▪ 100% stainless steel (polished).  ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting.  ▪ Measuring precision,  RS Custom laser cut for a perfect fit. Steel running boards Jeep Grand Cherokee IV 2010-2021 RS Custom are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone: Jeep Grand Cherokee IV 2010-2021   ▪ 100% stainless steel (polished).  ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Measuring precision, RS Custom laser cut for a perfect fit.  ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $30 surcharge.   ⚠ I am nstrukc and I  ① Place the RS Custom cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface where the RS Custom door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes.  ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your car. - We try to take pictures in different lighting conditions to give you an idea of how our product will look like.  -Your RS Custom product will look different in the sun than it does indoors.  -That's what makes our products so beautiful and unique!

Aluminum pads for BMW X 5 E53 AC Schnitzer custom. aluminum material. Replica of the original. These pads are for cars with a manual transmission. Installing the turn of regular pads on pedal cars. Available for vehicles with manual and automatic transmission. Delivery worldwide. custom. aluminum material. Replica of the original. These pads are for cars with a manual transmission. Installing the turn of regular pads on pedal cars. Available for vehicles with manual and automatic transmission. Delivery worldwide.

Led door sills Dodge RAM 1500 TRX 2020-2023 Dodge RAM 1500 TRX 2020-2023 with stainless steel includes 4 pieces. The material is plastic. Color black gloss. Includes 4 pads. Connecting thresholds from the illumination of car doors. Possibility of ordering with your inscription. seven vidos lights of your choice. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills KIA Stinger 2018-2023 with logo Scorpion. KIA Stinger 2018-2023 Luminous Boards Custom Made Stainless Steel Car Step Protector Trim Accessories KIA Stinger 2018-203 included 4 pieces.  Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. ⚠ I n s t r u k c and I ① Place the  cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your  product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Led door sills Mercedes-Benz GLE I C292 2015-2019  Mercedes-Benz GLE I C292 2015-2019 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Mercedes-Benz GLE I C292 2015-2019  with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

LED door sills for Mercedes-Benz E W212 2009-2016 with Mercedes-Benz logo Mercedes-Benz E W212 2009-2016 with Mercedes-Benz logo in stainless steel, set of 2 pcs. The RS Custom steel running boards are ready for installation by an electronics specialist and will individually update the look of your interior. This laser cut is 100% accurate for your car and fits your car perfectly. ▪ Fits all: Mercedes-Benz E W212 2009-2016 with Mercedes-Benz logo in stainless steel, set of 4  pcs. ▪ 100% stainless steel (polished). ▪ For the installation of the electronic product, we recommend that it be installed by a specialist. Connection to the 12W power supply, to the door lighting. ▪ Precision-made, laser-cut RS Custom design ensures a perfect fit. ▪ Transform your car into a personalized luxury and unique vehicle. Lettering: Standard car brand or with a custom lettering with an extra charge of $23. ⚠ Instructions ① Place the RS Custom cover on the surface before permanently fixing it to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the RS Custom threshold will be installed from dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially on the edges, for 30 seconds. Connect to 12W power to the door light. We hope you like our product! -Please be sure to check if some of the items in the product photos match the interior/exterior of your car. We do our best to take photos of different lighting conditions to give you an idea of what our product will look like. - You The RS Custom product will look different in sunlight than it does indoors. This is what makes our products so beautiful and unique!

Led door sills GMC Yukon V 2020+ with logo Yukon GMC Yukon V 2020+ with logo Yukon with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: GMC Yukon V 2020+with logo Yukon with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 23. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - You RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Светодиодная подсветка накладок на пороги Chrysler 300 C с логотипом 300 C Chrysler 300 C RS Custom готов к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех:  Накладки на пороги Крайслер 300 С ▪ 100% нержавеющая сталь (полированная).  ▪ Для установки электронного продукта рекомендуется поручить его установку специалисту. Электрическое подключение 12 Вт, для освещения двери.  ▪ Точность измерения,  Лазерная резка RS Custom для идеальной посадки. Стальные подножки Chrysler 300 C RS Custom готовы к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Для установки электронного продукта рекомендуется поручить его установку специалисту. Электрическое подключение 12 Вт, для освещения двери. ▪ Точность измерения, лазерная резка RS Custom для идеальной подгонки.  ▪ Превратите свой автомобиль в роскошный и уникальный автомобиль. Надпись: стандартная марка автомобиля или нестандартная надпись за дополнительную плату в размере 30 долларов США.   ⚠ Я нструкц и я  ① Поместите крышку RS Custom на поверхность перед постоянной фиксацией, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости).  ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты.  ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к блоку питания мощностью 12 Вт. для освещения дверей. Мы надеемся, что наш продукт вам понравится! -Обязательно проверьте соответствие некоторых предметов на фотографиях цветов в интерьере/экстерьере вашего автомобиля. - Мы стараемся фотографировать при разном освещении, чтобы вы имели представление о том, как будет выглядеть наш товар.  -Ваш продукт RS Custom будет выглядеть иначе на солнце, чем в помещении.  - Вот что делает нашу продукцию такой красивой и уникальной!

The versatility of the lamp makes it ideal for the evening or night, so it will be suitable as a gift for any holiday and will fit into any interior. A handmade wooden lamp will add a sense of coziness to your room. A unique shape that has a touch switch and energy-saving LEDs. The Marcel Wanders LED table lamp looks like a solid piece of wood! In addition, you can adjust the brightness of the light with a simple touch. The wooden lamp is ideal as an decoration for your office desk. The elegant shape and the natural wood will also fit into any bedroom as an exquisite bedside lamp. The lamp is powered by a USB cable, allowing you to use it anywhere using your phone charger or USB port. The power supply of another model of lamp #2 includes both a USB cable and a battery device that is mounted inside the base of the product. The LED lamp is unique in itself, because each one is made by hand. The lamps are made of ash wood. The team and I thought for a long time about coloring the product and came to one conclusion - the white body of the lamp and the black base of the product. The wooden lamp is painted and protected with varnish with a silky shine. We are currently happy to make just one variation of the product to match your furniture or room colors and can recommend the wood to suit your needs. technical information: Power Input: 5/12V 2A USB cable (2A recommended for full brightness). A charger is included. Energy consumption at full brightness: 5/7/9 W depending on the modification of the lamp. Service life of LEDs: 50,000 hours Luminous flux: Adjustable touch button: 2700K-6200K (warm to cool white) Touch switch with on/off, stepless brightness adjustment and memory of last brightness setting. High CRI, >85 Dimensions Height: 42 cm/ 16 inches Width: 15 cm/ 5.9 inches Model selection Model No. 1 USB cable 5W 5V/12V Model No. 2 USB cable 7W 5V/12V + battery 2600mAh 5W/5V Model No. 3 USB cable 9W 5V/12V Power Bank 15000 mAh

Led door sills  BMW X5 F15 witg logo ///M Perfomance. BMW X5 F15 with stainless steel includes 4 pieces. Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Ford Mustang with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.   Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Door sills for BMW E38 cars and BMW logo Individual. BMW E39 with AC Schnitzer logo. Door sills. Door sills made of rubber-plastic with aluminum supply (hand filling). Ready for easy installation and an instant individual update of your interior. The product is completely handcrafted from a die-cast aluminum insert with laser cutting, which allows you to create a custom lettering that perfectly suits your car and matches the area corresponding to the manufacturer of your car. It is attached to the base of the car, ensuring a secure and permanent hold. ▪ Adaptation for everyone: BMW E39 with AC Schnitzer logo. ▪ No adhesive primer required, very easy installation without any tools or devices. ▪ Accurate measurement. ▪ Transform your car into a personalized and unique car. 1. Before applying, place the cover on the surface to understand how it will look after installation. Be sure to place a piece of masking tape (if necessary). 2. Clean the surface where the threshold will be installed from dust/dirt and wax. Allow it to dry completely. Remove the adhesive tape. 3. Continue pressing, especially on the edges, for 30 seconds. Worldwide shipping. BMW E39 with AC Schnitzer logo.1 door sills. Rubber-plastic door sills with aluminum supply (hand-filled). Ready for easy installation and an instant personalized update of your interior. The product is entirely handcrafted from die-cast aluminum insert with laser cut, allowing you to create a custom lettering that perfectly suits your car and matches the area corresponding to the manufacturer of your car. It is attached to the base of the car, ensuring a secure and permanent hold. ▪ Adaptation for everyone: BMW E39 with AC Schnitzer logo.

Car led door sills BMW X5 E53 with logo custom BMW Individual BMW X5 E53  includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: BMW X5 E53  includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Car led door sills BMW X 5 E 53 inscription X5 Luminous Boards Custom Made Stainless Steel Car Step Protector Trim Accessories. Car led door sills BMW X 5 E 53 with logo custom X 5.  included 4 pieces. Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100 % accurate for your car, perfect for your car. ▪ Suitable for everyone: ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, laser cut design ensures perfect fit. ▪ Change your vehicle to a personalized luxury and unique vehicle. ⚠ I n s t r u k c and I ① Place the  cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your  product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Stainless steel hoot holder for Chevrolet Camaro 5 2009-2015 Individual order. Transformers. Auto accessories Chevrolet Camaro 5 2009-2015  Door holder 2 pieces, Door sills with illumination for Chevrolet Camaro cars. Mamba Mentality lettering. Worldwide shipping is free.Individual order. Door holder 2 pieces,  Door sills with illumination for Chevrolet Camaro cars. Mamba Mentality lettering. Worldwide shipping is free.

Stainless Steel Hood Retainer for Ford Mustang GT 350 2018-2023 SHELBY. Material: stainless steel. Individual order for a Ford Mustang car. Challenger with inscription: Logo: SHELBY inscription GT 350 Car door holders made of stainless steel GT 350 inscriptio Includes 2 door stops

Led door sills Jeep Grand Cherokee IV 2010+ with logo SRT Supercharged Jeep Grand Cherokee IV 2010+ with logo SRT Supercharged with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Jeep Grand Cherokee IV 2010+ with logo SRT Supercharged with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product!-Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Car led door sills with Jeep Grand Cherokee Track Hawk Supercharged With stainless steel included 4 pcs. The RS Custom steel running boards are ready to be installed by an electronics specialist and will customize the look of your interior. This laser cut is 100% accurate to your car and fits your car perfectly. ▪ Suitable for everyone: Jeep Grand Cherokee Track Hawk Supercharged logo stainless steel includes 4 pcs. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend that it be installed by a professional. Connection to 12 W power supply, to door lighting. ▪ Measurement precision, RS Custom laser cut design ensures a perfect fit. ▪ Transform your car into a personalized luxury and unique car. Inscription: Standard car brand or with an individual inscription with a surcharge of $30. ① Place the RS Custom cover on a surface before attaching it to a permanent base to get an idea of how it will look once installed. Be sure to place a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom threshold will be installed from dust/dirt and wax. Let it dry completely. Remove the adhesive tape. ③ Continue pressing, especially around the edges, for 30 seconds. Connect to 12W power. to the door light. We hope you enjoy our product! -Be sure to check if some items in the product photos match your car's interior/exterior. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills Audi A4 B8 2016+ Led door sills Audi A4 B8 2016+ with logo  Luminous Boards Custom Made Stainless Steel Car Step Protector Trim Accessories  Audi A4 B8 2016+ included 4 pieces.   Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look.  This laser cut is 100% accurate for your car, perfect for your car. Suitable for everyone:  Led door sills Audi A4 B8 2016+included 4 pieces. 100% stainless steel (polished).  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, laser cut design ensures perfect fit  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. I n s t r u k c and I  Place the  cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product!  Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.   Your  product will look different in sunlight than indoors.   This is what makes our products so beautiful and unique!

Emblem on the radiator grill of a Chrysler 300 S Bloody Material plastic. Fastening material: stainless steel. Custom. Worldwide delivery.

Covers for standard car sills with illuminated BMW X5 E70, X5 F 15 BMW inscription Material: stainless steel. Set includes 4 pads. BMW inscription. Connecting power to car door lights. Worldwide delivery.

Led door sills Volkswagem Tiguan R-Line Suitable for first and second generation cars. 4 things.  Volkswagem Tiguan R-LineLuminous High Quality Stainless Steel Door Sills Car Tread Trim Accessories Steel Boards are ready to be installed by an electronics specialist and custom upgrade your interior.  This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone:Volkswagem Tiguan R-Line in a set of 4 pcs. ▪ 100% stainless steel (polished). ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Accurate measurement, laser cut design for a perfect fit . ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $23 surcharge. ⚠ I am nstrukc and I ① Place the cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your vehicle. - We try to take pictures in different lighting conditions to give you an idea of how our product will look like. - Your product will look different in the sun than indoors. - That's what makes our products so beautiful and unique!

Led door sills Chrysler 300C II 2011+ with logo 300 C. lettering in includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for lettering in blue includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 23. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! - Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  - This is what makes our products so beautiful and unique!