SALES & DEALS

Накладки на пороги для автомобилей BMW E38 i i с логотипом BMWИндивидуальный. BMW E39 с логотипом AC Schnitzer. дверные пороги. Накладки на пороги из резино-пластика с алюминиевой вставкой (ручное заполнение). Готов к простой установке и мгновенному индивидуальному обновлению вашего интерьера. Изделие полностью изготовлено вручную из литого под давлением алюминиевого вкладыша с лазерной резкой, что позволяет создать индивидуальную надпись, которая идеально подходит вашему автомобилю и охватывает области, которыми производитель вашего автомобиля пренебрег. Он прикрепляется к основанию автомобиля, обеспечивая надежное и постоянное удержание. ▪ Подходит для всех: BMW E39 с логотипом AC Schnitzer.  ▪ Не требуется клейкая грунтовка, очень простой монтаж без каких-либо инструментов и аксессуаров. ▪ Точность измерения.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. 1. Перед постоянным приклеиванием положите крышку на поверхность, чтобы понять, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости).  2. Очистите поверхность, на которой будет установлен порог, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты.  3. Продолжайте нажимать, особенно по краям, в течение 30 секунд. Доставка по всему миру. BMW E39 с логотипом AC Schnitzer.1 накладки на пороги.  Накладки на пороги из резино-пластика с алюминиевой вставкой (ручное заполнение). Готов к простой установке и мгновенному индивидуальному обновлению вашего интерьера.  Изделие полностью изготовлено вручную из литого под давлением алюминиевого вкладыша с лазерной резкой, что позволяет создать индивидуальную надпись, которая идеально подходит вашему автомобилю и охватывает области, которыми производитель вашего автомобиля пренебрег. Он прикрепляется к основанию автомобиля, обеспечивая надежное и постоянное удержание. ▪ Подходит для всех: BMW E39 с логотипом AC Schnitzer.

Накладки на пороги для автомобилей BMW E38 i с логотипом ///M BMW E38 i с логотипом ///M на порогах. Накладки на пороги из резино-пластика с алюминиевой вставкой (ручное заполнение). Готов к простой установке и мгновенному индивидуальному обновлению вашего интерьера.  Изделие полностью изготовлено вручную из литого под давлением алюминиевого вкладыша с лазерной резкой, что позволяет создать индивидуальную надпись, которая идеально подходит вашему автомобилю и покрывает области, которыми производитель вашего автомобиля пренебрег. Он прикрепляется к основанию автомобиля, обеспечивая надежное и постоянное удержание. ▪ Подходит для всех: BMW E38 i с логотипом ///M.  ▪ Не требуется клейкая грунтовка, очень простой монтаж без каких-либо инструментов и аксессуаров. ▪ Точность измерения.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. 1. Перед постоянным приклеиванием положите крышку на поверхность, чтобы понять, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости).  2. Очистите поверхность, на которой будет установлен порог, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты.  3. Продолжайте нажимать, особенно по краям, в течение 30 секунд. Доставка по всему миру. BMW E38 i с логотипом ///M1 на порогах.  Накладки на пороги из резино-пластика с алюминиевой вставкой (ручное заполнение). Готов к простой установке и мгновенному индивидуальному обновлению вашего интерьера.  Изделие полностью изготовлено вручную из литого под давлением алюминиевого вкладыша с лазерной резкой, что позволяет создать индивидуальную надпись, которая идеально подходит вашему автомобилю и покрывает области, которыми производитель вашего автомобиля пренебрег. Он прикрепляется к основанию автомобиля, обеспечивая надежную и постоянную фиксацию. ▪ Подходит для всех: BMW E38 i с логотипом ///M.

Door sills for BMW E39 Individual Material: plastic. Caption: BMW Individual Installation in place of regular plastic thresholds of the car. Fastening on metal thresholds of a car. Possibility of ordering with your inscription under the order. Production of custom-made door sills with any inscriptions and logos for BMW cars. Fast shipping. Qualitative.

Door sills for BMW E34 M5 Material: plastic. Caption:  M5 Installation in place of regular plastic thresholds of the car. Fastening on metal thresholds of a car. Possibility of ordering with your inscription under the order. Production of custom-made door sills with any inscriptions and logos for BMW cars. Fast shipping. Qualitative.

Door sills Dodge Ram 1500 custom inscription RAM 1500.   Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Dodge Ram 1500 included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle.

Door sills Dodge Durango R/T 2011-2020  Door sills with illumination Dodge Durango R/T 2011-2020 with stainless steel includes 2 pieces.  RS Castom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  Suitable for everyone:  Dodge Charger with stainless steel includes 2 pieces.  100% stainless steel (polished).  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  Measuring accuracy, RS Castom laser cut design ensures perfect fit  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.   I n s t r u k c and I  Place the RS Castom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  Clean the surface on which the RS Castom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RSCastom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Door sills  Ford Fusion 2012-2021with logo Ford Perfomance   Material stainless steel. Includes 2 pads Custom.  ▪ 100% stainless steel (polished) ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Castom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Castom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12 W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RSCastom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Designer toys  dog Patron in Ukrainian embroidered shirt, made in ukraine, custom plush toys. A soft toy as a gift for a dog lover, defender of Ukraine, for decorating a children's room. I used high-quality yarn, hypoallergenic filler for toys. Toy of small height - 35 cm. Designer toys are a great individual gift! When ordering, I take into account all your wishes. Production time 4 days. The whole world will recognize this dog from Ukraine.  By purchasing this souvenir, you will receive a piece of Ukraine! The dog is knitted from high quality material. The toy is filled with hypoallergenic filler. The height of the toy is 32 cm. Toy care: gentle wash at 30 degrees, no bleach. It will take 4 days to create a toy.  

Custom BMW E38 740 iL 1994-2001 Individual door sills. Door sills made of rubber-plastic material with aluminum insert (manual filling). Ready for easy installation for an instant custom update to your interior look.  The product is completely handcrafted in a die-cast molding and laser cut aluminum liner for a custom lettering that fits your vehicle perfectly, covering areas that your vehicle manufacturer has neglected. It adheres to the vehicle base for a secure permanent hold. ▪ Suitable for all: BMW INDIVIDUAL E38 740 iL 1994-2001  ▪ No adhesive primer required, very easy installation without any tools or accessories ▪ Measurement accuracy ▪ Change your vehicle to a personalized luxury and unique vehicle.1. Before permanent bonding, place the cover on a surface to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).2. Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.3. Continue pressing, especially at the edges, for 30 seconds.Worldwide delivery.FREE DELIVERY.

Custom vley holders for Ford Mustang 6 SHELBY GT 350 2018-2023 Car door holders made of stainless steel. Car door struts for exhibition. GT 350 inscription Includes 2 door stops. Quality materials. An interesting detail for a car show will highlight your individuality. We can produce these parts with any design Inscription drawing or logo.

Накладки на пороги со светодиодной подсветкой Fiat 500 2007+ с логотипом Abarth Надпись Абарт Материал нержавеющая сталь. В комплекте 2 подушечки. Питание 12 вольт. Семь видов освещения на выбор. При заказе необходимо выбрать цвет подсветки. Подключение к подсветке дверей автомобиля. Доставка по всему миру

Накладки на пороги со светодиодной подсветкой Fiat 500 2007+ Надпись 500 Материал нержавеющая сталь. В комплекте 2 подушечки. Питание 12 вольт. Семь видов освещения на выбор. При заказе необходимо выбрать цвет подсветки. Подключение к подсветке дверей автомобиля. Доставка по всему миру

Car protector led door sills Ford Focus 2018+ with logo custom Ford Perfomance set of 4 pcs. Custom RS steel running boards are ready to be installed by an electronics specialist to customize your interior. This laser cutting is 100% accurate to your car, perfect fit for your car. ▪ 100% stainless steel (polished). ▪ To install an electronic product, it is recommended that it be installed by a professional. Connection to 12 W power supply, to door lighting. ▪ Precise measurements, laser cut RS Custom ensures a perfect fit  ▪Transform your car into a customized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $23. ⚠ I am nstrukc and I① Place the RS custom cover on the surface before permanently attaching it to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door threshold will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Continue pressing, especially around the edges, for 30 seconds. Connect to a 12 W power source. to door lighting. We hope you enjoy our product! - Be sure to check if some of the items in the product photos match the interior/exterior of your vehicle. - We try to take photos in different lighting to give you an idea of what our product will look like. - Your RS Custom product will look different in the sun than indoors. - That's what makes our products so beautiful and unique!

Car protector led door sills Dodge RAM 1500 with logo custom RAM 1500 included 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Dodge RAM 1500 included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.  ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Car protector led door sills Dodge Durango 2010- with logo custom Dodge SRT included 6 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone:  Dodge Durango 2010- with logo custom Dodge SRT included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Автомобильные светодиодные накладки на пороги с подсветкой Dodge Charger SRT Powered из нержавеющей стали входят в комплект из 4 частей. Стальные подножки RS Custom готовы к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех: Dodge Charger из нержавеющей стали включает 4 шт. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного изделия рекомендуем его установить специалисту. Подключение к источнику питания 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Custom обеспечивает идеальную посадку. ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Поместите крышку RS Custom на поверхность перед ее постоянным прикреплением, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к источнику питания 12 Вт. к освещению дверей. Мы надеемся, что вам понравится наш продукт! - Обязательно проверьте, точно ли некоторые элементы на фотографиях продукта соответствуют интерьеру / экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт. - Ваш продукт RS Custom будет выглядеть по-другому при солнечном свете, чем в помещении. Именно это делает нашу продукцию такой красивой и уникальной!

Car led door sills Toyota Tundra 2020+ with logo TRD pro With stainless steel includes 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Toyota Tundra 2020+ with logo TRD pro with stainless steel includes 4 pieces.  ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.  ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Toyota Tacoma 2020+ Car LED Door Sills with TRD pro Logo With stainless steel included 4 pcs. The RS Custom steel running boards are ready to be installed by an electronics specialist and will customize the look of your interior. This laser cut is 100% accurate to your car and fits your car perfectly. ▪ Suitable for everyone: Toyota Tacoma 2020+ with TRD pro logo stainless steel includes 4 pcs. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend that it be installed by a professional. Connection to 12 W power supply, to door lighting. ▪ Measurement precision, RS Custom laser cut design ensures a perfect fit. ▪ Transform your car into a personalized luxury and unique car. Inscription: Standard car brand or with an individual inscription with a surcharge of $30. ① Place the RS Custom cover on a surface before attaching it to a permanent base to get an idea of how it will look once installed. Be sure to place a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom threshold will be installed from dust/dirt and wax. Let it dry completely. Remove the adhesive tape. ③ Continue pressing, especially around the edges, for 30 seconds. Connect to 12W power. to the door light. We hope you enjoy our product! -Be sure to check if some items in the product photos match your car's interior/exterior. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills Toyota Camry V70 Luminous Boards Custom Made Stainless Steel Car Step Protector Trim Accessories Toyota Camry V70 included 4 pieces.   Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. ⚠ I n s t r u k c and I ① Place the  cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your  product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills protector Volkswagen Passat b8 2016+ Custom.  Ilumination led door sills BMW X5 F15 wit logo BMW Volkswagen Passat b8 2016+Luminous Boards Custom Made Stainless Steel Car Step Protector Trim Accessories Volkswagen Passat b8 2016+ included 4 pieces.  Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. ⚠ I n s t r u k c and I ① Place the  cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your  product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Автомобильные светодиодные накладки на пороги Mercedes-Benz W124 с логотипом на заказ. Mercedes-Benz W124 включает в себя 4 шт. Накладки на пороги изготовлены из пластика. Готов к простой установке и мгновенному индивидуальному обновлению вашего интерьера. Изделие полностью изготовлено вручную из литого металла под давлением алюминиевого вкладыша с лазерной резкостью, что позволяет создавать индивидуальную надпись, которая идеально подходит для вашего автомобиля и соответствует регионам, производящим ваш автомобиль. Он прикрепляется к основанию автомобиля, надежному, открытому и постоянному удержанию. ▪ Адаптация для всех: Не требуется клейкая грунтовка, очень простая установка без каких-либо инструментов или приспособлений. Точность измерений. Превратите свой автомобиль в персонализированный и уникальный автомобиль.  Перед натягиванием поместите крышку на поверхность, чтобы понять, как она будет выглядеть после установки. Обязательно поместите кусочек малярной ленты (при необходимости). Очистите поверхность, на которой будет установлен порог, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкую ленту. Продолжайте нажимать, особенно по краям, в течение 30 секунд. Доставка по всему миру.

Car led door sills Led door sills Mitsubishi Outlander III 2012+ included 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Led door sills Mitsubishi Outlander III 2012+ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit   ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors.  - is what makes our products so beautiful and unique!

Car led door sills Led door sills Dodge Durango III 2011+ inscription Dodge Led door sills Dodge Durango III 2011+ with logo Dodge included 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Led door sills Dodge Durango III 2011+ with logo Dodge included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  - This is what makes our products so beautiful and unique!

Car led door sills JEEP Grand Cherokee Track Hawk Supercharger Luminous Stainless Steel Door Sills Car Stair Decoration Accessories Blue Lettering Pack of 4 ready to be installed by an electronics specialist and custom upgrade your interior.  This laser cut is 100% accurate for your car, perfect for your car. ▪ Fit for everyone: Jeep Grand Cherokee Track Hawk Supercharger with blue lettering includes 4 pcs. ▪ 100% stainless steel (polished). ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Accurate measurement, laser cut design for a perfect fit.  ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $30 surcharge. ⚠ I am nstrukc and I ① Place the cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your car. - We try to take pictures in different lighting conditions to give you an idea of how our product will look like. Your product will look different in the sun than indoors That's what makes our products so beautiful and unique!