SALES & DEALS

Led door sills KIA Optima IV 2015-2019 includes 4 pieces. KIA Optima IV 2015-2019 included 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone: KIA Optima IV 2015-2019 included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Car led door sills Dodge Charger 2015-2021 SRT  Hellcat includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Dodge Charger 2015-2021 Hellcat includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Cгstom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12 W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Cгstom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Car led door sills Toyota Sequoia 2008-2021 Toyota Sequoia 2008-2021 includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Toyota Sequoia 2008-2021 includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 23. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  - This is what makes our products so beautiful and unique!

Car led door sills Dodge Charger 2009 - 2015 includes 4 pieces, RSCastom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone:  Dodge Charger 2009 - 2015 includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RSCastom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Car led door sills Chevrolet Camaro 5 2009 2015 inscription  Bumblebee. lettering in includes 2 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for lettering in blue includes 2 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 23. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! - Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  - This is what makes our products so beautiful and unique!

Светодиодные накладки на пороги Шевроле Малибу 2017+ Chevrolet Malibu 2017+ включает в себя 4 шт. Стальные подножки RSCastom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит всем: Chevrolet Malibu 2017+ в комплекте 4 шт.  ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Castom обеспечивает идеальную посадку. ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я нструкц и я ① Поместите крышку RSCastom на поверхность перед ее постоянным прикреплением, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RSCastom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт. - Ваш продукт RSCastom будет выглядеть по-другому при солнечном свете, чем в помещении.  -Вот что делает нашу продукцию такой красивой и уникальной!

Car led door sills Chevrolet Volt 2010-2019 includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Chevrolet Volt 2010-2019 includes 4 pieces.   ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RSCastom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Led door sills Lexus LX 570 2008-2021 Lexus LX 570 2008-2021 includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Lexus LX 570 2008-2021 includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Car led door sill Dodge Charger Scat Pack 2015-2024 RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Dodge Charger Scat Pack. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  - This is what makes our products so beautiful and unique!

Светодиодные накладки на пороги автомобиля Mitsubishi ASX 2010+ Раллиарт включает в себя 4 штуки. Стальные подножки RS Custom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит всем: Накладки на пороги Mitsubishi ASX 2010+ Ralliart в комплекте 4 штуки. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Castom обеспечивает идеальную посадку. ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я нструкц и я ① Поместите крышку RS Custom на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! - Обязательно проверьте, точно ли некоторые позиции на фотографиях товара соответствуют интерьеру/экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт. - Ваш продукт RS Custom будет выглядеть по-другому при солнечном свете, чем в помещении.  - Именно это делает нашу продукцию такой красивой и уникальной!

Car led door sills BMW X5 E70 2006 - 2013, X6 E71 2008-2015 includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: BMW X5  E70 2006-2013, X6 E71 2008 - 2015 includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  - This is what makes our products so beautiful and unique!

Car led door sills Ford Edge 2 2015-2021 Ford Edge 2 2015-2021 included 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.   ▪ Suitable for everyone: Ford Edge 2 2015-2021 included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit   ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).   ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.   ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.   -This is what makes our products so beautiful and unique!