Home & Outdoor

Wood carved angel. Large angel. If you are looking for a gift for Angel's Day, Baptism, Birthday, Mather’s day Or you want to decorate your home with original decor. Then our products will suit you perfectly. Large selection of handmade products. In the photo Angel wall decor. The color is brown. Dimension: Height 43(16.92”) Length 12cm (4.72”) Depth 4cm(1.57”) Linden material. Made entirely by hand by our master. In our small workshop. Suitable for kitchen, bedroom, children's room A great gift for your family and friends:) If you need a gift with a heart, then you come to us. The main thing! Each product is completely handmade, so there may be slight differences from what you see in the photo. These differences do not affect the functionality of the product. But don’t worry: for each order, I choose the most similar tree to the original. Thank you for looking at our work! We hope you enjoyed everything:) See our other products. Large range for every taste:)

Wooden carved angel. Made entirely by hand. Linden material. Color brown. A wonderful gift for a birthday, christening, a gift for mom or sister. Will be an original decor for your home or apartment. Wax coating. Dimension: Height 17 cm (6.69”) Width 10 cm(3.93”) Depth 4cm (1.57”) See our other products. Here you will find angels, crosses, candlesticks and much more. We will be glad if you find a product for your preferences)) The main thing! Each product is completely handmade, so there may be slight differences from what you see in the photo. These differences do not affect the functionality of the product. But don’t worry: for each order, I choose the most similar tree to the original. Thank you for looking at our work! We hope you enjoyed everything:) See our other products. Large range for every taste:)

If you love beer and looking for something outstanding, definitely you will love this beer bottle cap display! Our Europe Wooden Beer Cap Map is the perfect present for your second half or for someone who love traveling and beer, because it is the best way to display your travel. At the same time, it is nice design solution for pub, café, garage or man cave as well! Our Beer Cap Map holder made from high quality Europe plywood, this display map features 52 precision laser cut holes to securely hold your bottle caps collection. Unique construction allows to easy-in/easy out bottle caps. Everything is very simple! Just push your favorite caps into the features from the back side and the snug fit will hold them securely in place. To change an already installed cap, just apply some pressure to the cap from the front side and it will pop out of the back and you're ready to install it's replacement. For more Cap Maps: https://www.etsy.com/shop/BoardCaps?ref=search_shop_redirect§ion_id=23329803 For construction use this assembly and application guide: https://www.youtube.com/watch?v=LwIk2omep2M Map measure: Size: 19.29 inc x 14.76 inc x 0,28 inc (49.5 cm x 37.5 cm x 0.7 cm) Holds 52 bottle caps. Material: waterproof plywood, stain Stones as a GIFT Four holes on the sides given the opportunity easy display map on the wall. We also include two special wooden pieces to display map on the table or on the shelf. We welcome custom orders. Please contact us with any questions. Orders ship in 10-15 days. If you need a rush order let us know and we'll try to accommodate it. Thank you for your order

Beer Cap Holder Map of Germany with stands. Collection of beer caps, decorated in a card - an original gift For more Cap Maps: https://www.etsy.com/shop/BoardCaps?ref=search_shop_redirect§ion_id=23329803 A beer lover will certainly appreciate everything related to his adored drink. Be it a helmet with tubules, from which it is convenient to drink beer even in the lying position, a beer set consisting of a wooden box and 6 bottles of intoxicating or rare crowns of cork. And the special value for the recipient of the last object is if he came to him across the seas, mountains and crossed several boundaries. For imported souvenirs from other countries, they allocate a special place or even install a pedestal. A collection of beer caps, collected in a box or bag, looks wretched and ridiculous. But if such a selection is presented in the form of a map, it will immediately become the original decor in the house and the solid heritage of its owner. That's why the map of Germany CAPSBOARD GERMANY was created with holes for the cork plugs. Such a legacy can be proudly shown even to children. Do you know what the map of Germany looks like? Cut out the contour map is divided into 16 regions, each of which is signed by an English name. It is made of environmentally friendly plywood. This cover album contains 38 holes, the card has 2 stands, which ensures its stable position For construction use this assembly and application guide: https://www.youtube.com/watch?v=rGkX7ODNJHQ Size: 49cm x 37cm x 0,7cm Holds 38 bottle caps. Material: waterproof plywood Stand as a gift

  This model of solid fuel burner is specifically designed for prolonged use in harsh environmental conditions and is versatile in choosing the power supply for the forced air supply unit.   The solid fuel camping stove "Airwood Heavy Duty UP-h BM" will become a reliable companion for travelers who enjoy extended trips (a month or more) in marine, tropical climates or other aggressive environments for metal products. All connections of the stand for the dishes and combustion chamber are made with stainless steel fasteners. All the most vulnerable nodes of the burner are made of highly corrosion-resistant stainless steel! The forced air supply unit of the "Airwood Heavy Duty UP-h BM" stove can be powered by batteries, Power Bank, solar panel with built-in battery or a smartphone connected via an OTG cable."   Thanks to the air pressure unit, the solid fuel camping stove "Airwood Heavy Duty UP-h BM" provides powerful heating even when using wet wood and quickly brings water to a boil. The boiling time for 0.26 US gal lqd of water is about 5 minutes, depending on the quality of the fuel and environmental conditions.   The stove has a fuel combustion efficiency of up to 80%, unlike the 5-7% efficiency of a regular campfire. This is because about 90% of the particles in the smoke from the wood are unburned due to the lack of oxygen. When fresh air is supplied to certain areas of the stove's combustion chamber, these fine particles burn. This is how this stove is built: cold air from the pressure unit enters through a side opening in the lower part of the outer wall of the stove's body. Under the action of the fan, one part of the air is pressurized into the openings of the bottom and lower part of the combustion chamber, while the other is directed upwards, between the walls of the combustion chamber and the body, where it heats up and exits through special openings, entering the upper part of the combustion chamber and igniting the wood gas.   Intense flames are formed where air is released, due to oxygen enrichment.   You can easily cook food (soup, porridge, tea, etc.) on the stove, up to a volume of 0.79 - 1.06 US gal lqd.   Branches, twigs, bark, and any other available solid fuel can be used as fuel.   The air injection block (blower) in the combustion chamber is equipped with a three-position switch with the following modes: Middle position - "Off" (the stove operates in natural draft mode with the blower disconnected), Upper position - "High speed" (~ 3000 rpm) - for instant ignition and boiling of water, Lower position - "Low speed" (~ 2000 rpm) - to maintain high-temperature flames.      The air injection block included with this burner model is universal in power source selection: it can be powered by two AA or two AAA batteries (with adapters for AAA batteries to AA batteries - included), or any other power source with a 5-volt DC output and a USB or DC 0.2 inch x 0.08 inch plug. For example, this can be a power bank, a solar panel with a built-in battery, or a smartphone connected via an OTG cable. When an external power source is connected to the DC jack of the blower block (via the "USB-DC" cable included in the kit), the battery compartment in the blower block is automatically disconnected.        Continuous operation time of the block with AA batteries: • in "High speed" mode: ~ 30 hours; • in "Low speed" mode: ~ 50 hours;        The current consumed by the blower block (depending on the power source): • in "High speed" mode: 70-100mA; • in "Low speed" mode: 30-50mA.       The air supply block is equipped with a motor that has thermal radiation shielding and dust and moisture insulation at the IP55 protection class level. This improvement allows the owner of the burner to use it in conditions of high humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the motor will fail at the most inappropriate moment.       The burner is equipped with an updated version of a folding stand for cookware. This accessory has increased heat resistance and is specially designed for more stable placement on the burner of round pots (pans) with a wide base. The stand will also be appreciated by fans of morning coffee in nature, prepared in a Turkish coffee pot (a vessel with a small diameter bottom).       Thanks to the folding legs, the folding stand will be "convenient" for both cookware with a 2 inch diameter bottom and cookware with a 10 inch diameter bottom! After the legs are unfolded, they are fixed at a certain angle to the horizon, thereby ensuring a reliable grip of the cookware's bottom. When the load is increased, the legs take on a horizontal position, and the upper part of the stand's canvas slightly diverges outward around the entire circumference, increasing the rigidity of the stand and the stability of the cookware.       The new stand differs from the previous version also by the presence of ventilation holes in the form of the manufacturer's brand name. This change reduced the total area of ventilation holes on the stand's canvas, which improved the wind protection characteristics of the stand and increased the burner's power. In addition, the writing on the stand allows distinguishing the original product from a copy immediately. The height of the stand's canvas was also reduced, which increased the stiffness of the structure and improved the heating of the cookware's bottom.       A new combustion chamber installed in the burner significantly differs from the old version: the number, diameter, and configuration of air injection holes have been changed to improve the quality of wood burning in the lower part of the chamber. The changes have successfully eliminated the clogging of the chamber with smoldering charcoal and improved the burning of raw wood, thus maximizing the burner's adaptation to real camping conditions, where dry wood is scarce. In addition, the new version of the chamber ensures stable fuel burning in natural draft mode (with the blower disconnected) - this feature is essential for cooking dishes that do not require intense flames.   In this burner model, the combustion chamber has thicker walls and a larger volume compared to the chamber of classic "Airwood BM" turbo burners. All chamber elements are made of highly corrosion-resistant stainless steel. The combustion chamber is rigidly assembled (screwed) with a housing that has standard dimensions for "Airwood BM" turbo burners.   The external casing (housing) of the "Airwood Heavy Duty UP-h BM" burner has a closed bottom, which creates a sealed space between two burner walls (between the combustion chamber and the housing), ensuring that all air from the blower is supplied to the combustion chamber. Thus, there is no need to look for a flat surface to place the burner, as this burner model can even be used in a suspended position! Another advantage of a burner with a housing bottom is that it does not leave burns on the ground after use, as with bonfires. The bottom of this model is made of highly corrosion-resistant stainless steel.   In this burner model, the housing is equipped with a removable handle holder, allowing you to change the position (adjust) or move the burner during operation (burning). This feature comes in handy in case of sudden weather changes - you can quickly and safely move the burner to a more sheltered location in case of sudden rain or wind gusts. Features: Metal material: stainless steel of various grades and thicknesses (0.01 inch - 0.03 inch); Combustion chamber: Resource: up to 800 hours of burner operation depending on storage and usage conditions; Volume 28 us fl oz; Dimensions: In packaged state: height 5.1 inch, diameter 4.7 inch; During use: height 6.7 inch, diameter from 4.7 inch to 6.3 inch; Total weight of burner with case, handle, batteries, and USB-DC cable - 1.37 lbs. Package includes: 1. Burner assembly with bottom and high-corrosion-resistant combustion chamber; 2. Reinforced heat-resistant folding stand for cookware; 3. Air supply unit powered by two AA batteries and a DC connector (0.2 inch*0.08 inch); 4. Removable handle for burner; 5. USB-DC cable; 6. Durable waterproof "Oxford" fabric case; 7. Recommendations for using the burner; 8. Two adapters for AAA batteries to AA batteries.

This burner model is specially designed for long-term use in harsh environmental conditions!  The solid fuel camping stove "Airwood Heavy Duty AA-H BM" will be a reliable companion for hikers who enjoy long trips (a month or more) in a marine, tropical climate, or other aggressive conditions for metal products. All connections of the dish bracket and combustion chamber are made with stainless steel fasteners. All of the most vulnerable burner components are made of highly corrosion-resistant stainless steel!  Thanks to the air supply block, the burner provides powerful heating even when using raw wood and quickly brings water to a boil. The boiling time for 0.26 US gal lqd of water is from 5 minutes, depending on the fuel quality and environmental  conditions.  The burner has a fuel combustion efficiency of up to 80% compared to the 5-7% efficiency of a regular fire. This is because about 90% of the particles in wood smoke are unburned due to lack of oxygen. When fresh air is supplied to certain areas of the burner's combustion chamber, these small particles burn. This is the principle behind this burner: cold air from the supply block enters the side opening at the bottom of the outer wall of the burner housing. Under the action of the fan, one part of the air is pressurized into the openings at the bottom and lower part of the combustion chamber, while the other is directed upwards between the walls of the combustion chamber and the housing, where it heats up and exits through special openings, entering the upper part of the combustion chamber, providing ignition of wood gas.  Intense tongues of flame are formed where the air exits, due to oxygen enrichment.  The burner can effortlessly prepare food (soup, porridge, tea, etc.) with a volume of up to 0.79 - 1.06 US gal lqd.  Branches, twigs, and any other available solid fuel can be used as fuel.  The air supply unit (blower) for the combustion chamber is equipped with a three-position switch with the following modes: Middle position - "Off" (the furnace operates in natural draft mode with the blower disconnected), Upper position - "High speed" (~ 3000 rpm) - for instant ignition and boiling of water, Lower position - "Low speed" (~ 2000 rpm) - for maintaining high-temperature flame.  The air supply unit, which comes with this burner model, is powered by two AA batteries or two AAA batteries ( with adapters for AAA batteries to AA batteries - included ). Continuous operation time of the unit from AA batteries: • in "High speed" mode: ~ 30 hours;  • in "Low speed" mode: ~ 50 hours;  The air supply unit is equipped with a motor shielded from thermal radiation and dust and moisture insulation at the IP55 protection level. This improvement allows the burner owner to use it in conditions of increased humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the motor will stall at the most inappropriate moment.  The burner comes with an updated version of a collapsible stand for cookware. This accessory has increased heat resistance and is specially designed for more stable placement on the burner of round pots (pans) with a wide bottom. The stand will appeal to fans of morning coffee in nature, prepared in a Turkish coffee pot (cookware with a small diameter bottom).   Thanks to the folding legs, the collapsible stand will be "convenient" for cookware with a bottom diameter of 5 cm and cookware with a bottom diameter of 25 cm! After unfolding, the legs are fixed at a certain angle to the horizon, thus ensuring a reliable grip of the cookware's bottom, and when the load is increased, the legs take a horizontal position, while the upper part of the stand's fabric slightly spreads outward around the entire circle, increasing the rigidity of the stand and stability of the cookware.  The new stand differs from the previous version by the presence of ventilation holes in the form of the manufacturer's brand name. This change reduced the total area of ventilation holes on the stand fabric, which improved the wind protection characteristics of the stand and increased the burner's power. In addition, the text on the stand allows distinguishing the original product from a copy right away. The height of the stand's fabric was also reduced, which increased the rigidity of the structure and improved the heating of the cookware's bottom.  A new combustion chamber installed in the burner significantly differs from the old version: the number, diameter, and configuration of air injection holes have been changed to improve the quality of wood burning in the lower part of the chamber. It was possible to eliminate clogging of the chamber with smoldering coals and improve the burning of raw wood, thus adapting the burner to real field conditions, where dry wood is scarce. In addition, the new version of the chamber allows for stable combustion of fuel in natural draft mode (with the booster block disconnected from the burner) - this feature is very important for cooking dishes that do not require intense flames.  In this burner model, the combustion chamber has thicker walls and a larger volume compared to the combustion chamber of the classic turbo burners of the "Airwood BM" series. All chamber elements are made of high corrosion-resistant stainless steel. The combustion chamber is rigidly assembled (screwed connection) with a housing that has standard dimensions for the "Airwood BM" series turbo burners.  The outer casing (body) of the "Airwood Heavy Duty AA-h BM" burner has a closed bottom, which creates a closed space between the two walls of the burner (between the combustion chamber and the body), meaning all air from the blower is guaranteed to be supplied to the combustion chamber. Thus, there is no need to search for a flat surface to place the burner, as this type of burner can even be used in a suspended state! Another advantage of the burner with a closed bottom of the body is that there are no burns left on the ground after its use, as after a bonfire. The bottom of this model is made of highly corrosion-resistant stainless steel.  In this model of the burner, the body is equipped with a removable handle-grip, which allows you to change the position (adjust) or move the burner during its operation (burning). This feature will come in handy in case of sudden weather changes - you can quickly and safely move the burner to a more protected place in case of sudden rain or wind gusts. Metal material: stainless steel of different grades and thicknesses (0.01 inch - 0.03 inch.); Features: Resource: up to 800 hours of burner operation depending on storage and use conditions; Volume: 28.0 fluid ounces; Dimensions: In the packaged state: height 5.31 inches, diameter 4.72 inches; During use: height 6.89 inches, diameter from 4.72 inches to 6.3 inches. Total weight of the burner together with the case, handle holder, batteries: 1.32 lbs. Package includes: 1. Burner assembly with bottom and high-corrosion-resistant combustion chamber; 2. Reinforced heat-resistant folding stand for cookware; 3. Air injection unit powered by two AA batteries; 4. Removable burner handle; 5.Strong waterproof "Oxford" fabric case; 6.Instructions for using the burner ; 7. Two adapters for AAA batteries to AA batteries.

This solid fuel turbojet engine model is specifically designed for long-term operation in challenging environmental conditions, and the forced air supply unit can be powered by any external power source with a voltage of 3-6V, which has a USB output.   The Airwood Heavy Duty USB-h BM camping stove will be a reliable companion for travelers who enjoy long trips (a month or more) in a marine, tropical climate, or in other aggressive environments for metal products. All connections of the utensil stand and combustion chamber are made with stainless steel fasteners. All the most vulnerable parts of the stove are made of highly corrosion-resistant stainless steel! The forced air supply unit of the Airwood Heavy Duty USB-h BM stove can be powered by a Power Bank, Power Box BM power module, solar panel with built-in battery, smartphone connected via OTG cable, or any other external power source with a constant voltage of 3-6V that has a USB output or a 0.22 inches x 0.08 inches DC plug.  Thanks to the air injection block, the burner provides powerful heating even when using raw wood and quickly brings the water capacity to a boil. The boiling time of 0.26 gallons of water is from 5 minutes, depending on the quality of the fuel and the surrounding environment.   The burner has a fuel combustion efficiency of up to 80%, unlike the 5-7% efficiency of regular bonfires. This is because about 90% of the particles in the smoke from the wood are unburned due to lack of oxygen. When fresh air is injected into certain parts of the burner combustion chamber, these fine particles burn. This is the principle behind this burner: cold air from the injection block enters the side hole at the bottom of the outer wall of the burner housing. Under the action of the fan, one part of the air is injected into the holes in the bottom and lower part of the combustion chamber, while the other is directed upward between the walls of the combustion chamber and the housing, where it is heated and exits through special holes, entering the upper part of the combustion chamber and igniting the wood gas.   Where the air exits, intense flames are formed due to oxygen enrichment.  The burner can be used to cook food (soup, porridge, tea, etc.) with a volume of up to 0.79-1.06 gallons without any effort.  Branches, twigs, bark, and any other readily available solid fuel are used as fuel.   The air supply (blower) block for the combustion chamber is equipped with a DC input connector (socket) (0.22 inches * 0.08 inches.) with a hinged cap-plug to protect the connector from contamination, and a switch with the following modes: Upper position - "High speed" - for instant ignition and water boiling, Lower position - "Low speed" - to maintain high-temperature flames.  The current consumed by the blower block depends on the voltage of the power supply: • in "High speed" mode: 70-100mA; • in "Low speed" mode: 20-50mA;   In the air compressor unit, there is an engine with thermal radiation and dust-humidity protection at the IP55 protection level. This improvement allows the owner of the burner to use it in conditions of high humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the engine will fail at the most inappropriate moment.   The burner also operates in natural draft mode, for which it is sufficient to disconnect  the air compressor unit from the burner body. This mode is suitable for cooking dishes that do not require a strong flame, such as porridge.   The burner comes with a folding stand for cookware. This burner component has increased heat resistance and is specially designed for more reliable placement of round pots (pans) with a wide bottom on the burner. However, the stand will also be useful for fans of morning coffee in nature, prepared in a Turkish coffee pot (a dish with a small bottom diameter), because thanks to the folding legs, the stand will be "convenient" for dishes with a bottom diameter of 1.97 inches and 9.84 inches.!   After unfolding, the legs are fixed at a small angle to the horizon, ensuring reliable grip of the dish's bottom. When the load increases, the legs take a horizontal position, and the upper part of the stand's canvas diverges slightly outward around the entire circle, increasing the rigidity of the stand and the stability of the dish on it.   The new combustion chamber installed in the burner is significantly different from the old version: the quantity, diameter, and configuration of the air injection holes have been changed to improve the quality of the burning of the wood in the lower part of the chamber. These changes have eliminated the problem of clogging the chamber with smoldering coal and improved the burning of raw wood, thereby maximizing the adaptation of the burner to real field conditions, where dry wood is rare. In addition, the new version of the chamber ensures stable fuel burning in natural draft mode (with the booster disconnected from the burner) - this feature is very important for cooking dishes that do not require intense flame.   In this burner model, the combustion chamber has thicker walls and a larger volume compared to the chamber of the classic "Airwood BM" series turbo-burners. All chamber elements are made of highly corrosion-resistant stainless steel. The combustion chamber is assembled with the body in a rigid screw connection with the standard dimensions for the "Airwood BM" series turbo-burners.   The outer casing of the "Airwood Heavy Duty USB-h BM" burner has a closed bottom, which creates a sealed space between the two walls of the burner (between the combustion chamber and the casing), ensuring that all air from the air supply unit is directed into the combustion chamber. This means that there is no need to search for a flat surface to place the burner on, as it can even be used in a suspended state! Another advantage of the burner with a closed bottom casing is that after use on the ground, there are no burn marks left behind like with a bonfire. The bottom of this model is made of highly corrosion-resistant stainless steel.  To remove the ashes after use (once the burner has cooled), it is sufficient to remove the cooking stand and air supply unit from the burner and shake out the ashes from the combustion chamber by turning the burner upside down. Any remaining ash between the combustion chamber and the casing can easily be shaken out through the large opening on the side of the casing, to which the air supply unit is attached during burner operation.   In this model of the burner, the housing is equipped with a removable handle-holder that allows you to adjust the position or move the burner during its operation (burning). This feature will come in handy in case of sudden weather changes - you can quickly and safely move the burner to a more protected place in case of sudden rain or gusts of wind. Features: Metal material: stainless steel of various grades and thicknesses (0.01 in-0.03 in); Combustion chamber: resource: from 800 hours of burner operation depending on storage and operation conditions; volume 830ml; Dimensions: in the package: height 5.3 inches, diameter 4.7 inches; during use: height 6.9 inches, diameter from 4.7 inches to 6.3 inches; Total weight of the burner together with the cover, handle holder, and USB-DC cable - 1.2 lbs.  Package includes: 1.Burner housing assembled with bottom and high corrosion-resistant combustion chamber; 2. Reinforced heat-resistant folding stand for cookware; 3. Air supply unit with speed switch and DC connector 0.22 inches x 0.08 inches; 4. Detachable burner handle-grip; 5. USB-DC cable; 6. Strong waterproof "Oxford" fabric cover; 7. Instructions for use.

The "Airwood Euro-h BM" solid fuel stove is lightweight, compact, and simply indispensable in conditions with limited wood and time! Thanks to the air pressurization block, the stove provides powerful heating even when using wet wood and quickly brings water to a boil. The boiling time for 0.26 gallons of water is 5 minutes or more, depending on the quality of the fuel and the surrounding environment.  The burner has a fuel combustion efficiency of up to 80%, compared to the 5-7% efficiency of a regular campfire. This is because the smoke from the wood contains about 90% of particles that did not burn due to lack of oxygen. When fresh air is introduced to certain areas of the burner's combustion chamber, these small particles can be burned. This is the principle on which this burner is built: cold air from the air intake enters the side opening of the lower outer wall of the burner housing. Under the action of the fan, one part of the air is forced into the openings at the bottom and lower part of the combustion chamber, while the other is directed upwards between the walls of the combustion chamber and the housing. There, as it is heated, it exits through special openings and enters the upper part of the combustion chamber, providing ignition of the wood gas. Where the air exits, tongues of intense flames are formed due to the enrichment of oxygen. On the stove, food (soup, porridge, tea, etc.) with a volume of up to 0.8-1.1 gallons can be cooked effortlessly. Branches, twigs, kindling, and any other available solid fuel can be used as fuel. Air injection block (air blower) for the combustion chamber is equipped with a three-position switch with the following modes: Middle position - "Off" (the stove operates in natural draft mode with the air injection block disconnected); Upper position - "High speed" (~ 3000 rpm) - for quick ignition and boiling water; Lower position - "Low speed" (~ 2000 rpm) - for maintaining high-temperature flame The fan of the air injection block is powered by 2 AA batteries with a voltage of 3 V. Continuous operation time of the block from AA batteries: • in "High speed" mode: ~ 30 hours; • in "Low speed" mode: ~ 50 hours; The air injection block is equipped with a motor shielded from thermal radiation and dust-moisture insulation at the IP55 protection class level. This improvement allows the stove owner to use it in conditions of increased humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the motor will fail at the most inappropriate moment. The burner comes equipped with an updated version of a foldable stand for cookware. This accessory has increased heat resistance and is specially designed for more stable placement of round pots with wide bottoms on the burner. The stand will be appreciated by fans of morning coffee in nature made in a Turkish coffee pot with a small diameter bottom. Thanks to its foldable legs, the stand is "convenient" for cookware with bottom diameters ranging from 1.97 and 9.84 inches! After the legs are opened, they are fixed at a certain angle to the horizon, ensuring a reliable grip on the bottom of the cookware. When the load is increased, the legs take a horizontal position, and the upper part of the stand's fabric spreads slightly outward around the entire circle, increasing the rigidity of the stand and the stability of the cookware.   The new stand differs from the previous version in the presence of ventilation holes in the shape of the manufacturer's brand name. This change reduced the total area of ventilation holes on the stand's fabric, which improved the wind protection characteristics of the stand and increased the burner's power. Additionally, the text on the stand allows for easy differentiation between the original product and a copy. The height of the stand's fabric was also reduced, increasing the construction's rigidity and improving the heating of the cookware's bottom.  The new combustion chamber installed in the burner is significantly different from the old version: the quantity, diameter, and configuration of the air injection holes have been changed to improve the quality of wood burning in the lower part of the chamber. It was possible to eliminate clogging of the chamber with smoldering coal and improve the burning of wet wood, thus maximizing the adaptation of the burner to real hiking conditions where dry wood is scarce. In addition, the new version of the chamber ensures stable fuel burning in natural draft mode (with the pump block disconnected from the burner) - this feature is very important for cooking dishes that do not require intense flames.  The outer casing of the solid fuel burner "Airwood Euro-h BM" has a closed bottom, which creates a sealed space between the two walls of the burner (between the combustion chamber and the casing), meaning that all air from the blower unit (air supply) is guaranteed to be delivered to the combustion chamber. Therefore, there is no need to search for a flat surface to place the burner, as it can even be used in a suspended state! Another advantage of the burner with a closed bottom casing is that there are no burns left on the ground after use, as there are after a bonfire.  In this model of burner, the casing is equipped with a removable handle holder, which allows you to change the position (adjust) or move the burner during its operation (burning). This option will come in handy in case of sudden weather changes - you can quickly and safely move the burner to a more sheltered place in case of sudden rain or gusts of wind. Features: • Metal material: stainless steel of various grades and thicknesses (0.01 in-0.03 in); • Combustion chambers: ◦ from 300 to 800 and more hours of burner operation depending on storage and usage conditions; ◦ volume of 23.3 fl oz; Dimensions: ◦ in packaged state: height of 4.7 in, diameter of 4.7 in; ◦ during use: height of 6.3 in, diameter from 4.7 in to 6.3 in; • Total weight of burner with case, batteries, and handle grip: 1.06 lbs . Package includes: 1. Burner body assembled with combustion chamber and bottom;  2. Reinforced heat-resistant folding stand for cookware;  3. Air compression unit powered by two AA batteries;  4. Detachable handle grip for the burner;  5. Case made of strong waterproof Oxford fabric;  6. Instructions for using the burner;  7. Two adapters for AAA batteries to AA batteries.

Can not buy a gift for a man on your birthday? Pay attention to his preferences in drinks. In most cases, a modern man will not allow himself strong drinks on a weekday evening, but relax with a small amount of delicious beer of his favorite variety at the end of the day. If your birthday person prefers this way to "switch", then an original and practical gift to a man who loves beer is a box of beer BIG BOX DARK for six bottles (0.5 liters) with a sturdy handle and an unusual design. For More Beer Boxes: https://www.etsy.com/shop/BoardCaps?ref=search_shop_redirect§ion_id=23318408 A happy owner of a stylish gift - a beer box BIG BOX DARK, will open a bottle of a cool, favorite drink and a cork from a favorite variety will be fixed to the memory of an unforgettable taste in one of the 18 holes of the box's wall. A box of beer BIG BOX DARK - an unusual organizer, an original decor for a beer lover and reliable for transporting beer; The caddy in use: https://www.youtube.com/watch?v=o1OVOawjZYA ✓ Thanks to strong material, it is possible to transport bottles in a box for long distances; ✓ A box can be an original gift wrapper for a beer lover - a beer set; ✓ The dark brown color of the drawer allowed it to look like a fashion accessory; ✓ Holes in the wall of the box for beer stoppers classify it into the category - creative gifts for men. Please contact us with any questions. Orders ship in 1-2 day. Thank you for your order

Wooden box Enchanted Forest - Unicorn. For crystals storage, jewelry, tea or your craft supplies. Mysterious and bewitching brown-green-turquoise colors. Only one copy, each box is unique. Series Green Witchcraft. You buy exactly the item which you see on the photos. ????Material: natural wood, decorative metal elements keys and unicorn, acrylic colours. ????Size of a box: 17.5x15.5x8 cm| 6.8х6.1х3.1 in. ????Size of one cell: 7.5x6.5x7.3cm| 2.7х2.5х2.8 in. Other boxes from the Series Green Witchcraft: https://www.etsy.com/listing/1268502646/wood-box-green-witch-alchemy-box-for

Large wooden bowls. This is a set of wooden carved bowls in the shape of a heart. The set consists of 4 bowls of different sizes, one color. You can buy one bowl, two, three or a whole set. Dimension: 1. 15*15*2cm (5.9*5.9*0.78 inch) 2. 20*20*3cm (7.87*7.87*1.18 inch) 3. 25*25*3cm (9.84*9.84*1.18 inch) 4. 30*30*4cm (11.81*11.81*1.57 inch) Collar brown. Tung oil coating(Note: Tung oil may still be released from the product for some time. Therefore, it is not recommended to put bowls on a white tablecloth) The main thing! Each product is completely handmade, so there may be slight differences from what you see in the photo. These differences do not affect the functionality of the product. But don't worry: for each order, I choose the most similar tree to the original. Thank you for looking at our work! We hope you enjoyed everything:)

Wood Bowl Set, Decorative wood bowl We made this product completely by hand. Great plate design that will be the highlight of your table. Linden material. The color is brown. Made in the old style. Bowl dimension: Length 30 cm (11.81 inches) Width 14 cm (5.51 inches) Depth 3 cm (1.18 inches) Coating Tung oil is safe when interacting with products. The main thing! Each product is made entirely by hand, so there may be slight differences from what you see in the photo. These differences do not affect the functionality of the product. But don't worry: for each order I choose the tree most similar to the original. Thank you for looking at our work! We hope you enjoyed everything:) See our other products. Large range for every taste:)

Details World map CAPSBOARD WORLD with stand, Beer Gifts If you love beer and looking for something outstanding, definitely you will love this beer map cap! Our World Wooden Beer Cap. This is the best way to display your travel. At the same time, it is a nice design solution for pub, café, garage or man cave as well! Our Beer Cap Card holder made of high quality World plywood, this display map features 144 precision laser cut holes to securely hold your bottle caps collection. Unique construction allows to easy-in / easy out bottle caps. Everything is very simple! Just push your favorite caps into the features of the back side and the snug fit will secure them securely in place. To change an already installed cap, just apply some pressure to the cap from the front side and it's ready to install it's replacement. Size: 29,3 inc x 15,35 inc x 0,28 inc (74,5cm x 39,5cm x 0,7cm) Holds 144 bottle caps. Material: waterproof plywood

Can not buy a gift for a man on your birthday? Pay attention to his preferences in drinks. In most cases, a modern man will not allow himself strong drinks on a weekday evening, but relax with a small amount of delicious beer of his favorite variety at the end of the day. If your birthday person prefers this way to "switch", then an original and practical gift to a man who loves beer is a box of beer BIG BOX DARK for six bottles (0.5 liters) with a sturdy handle and an unusual design. For More Beer Boxes: https://www.etsy.com/shop/BoardCaps?ref=search_shop_redirect§ion_id=23318408 A happy owner of a stylish gift - a beer box BIG BOX DARK, will open a bottle of a cool, favorite drink and a cork from a favorite variety will be fixed to the memory of an unforgettable taste in one of the 18 holes of the box's wall. A box of beer BIG BOX DARK - an unusual organizer, an original decor for a beer lover and reliable for transporting beer; The caddy in use: https://www.youtube.com/watch?v=o1OVOawjZYA ✓ Thanks to strong material, it is possible to transport bottles in a box for long distances; ✓ A box can be an original gift wrapper for a beer lover - a beer set; ✓ The dark brown color of the drawer allowed it to look like a fashion accessory; ✓ Holes in the wall of the box for beer stoppers classify it into the category - creative gifts for men. Please contact us with any questions. Orders ship in 1-2 day. Thank you for your order

If you love beer you will love this beer bottle caddy! Our Beer Bottle holder is the perfect present for your beer lover. Moreover, our Wooden Box will be really useful in a pub, car or man cave as well! For More Beer Boxes: https://www.etsy.com/shop/BoardCaps?ref=search_shop_redirect§ion_id=23318408 These DIY Beer bottle six pack carriers have unique construction and made from plywood without glue, or screws. Also beer caddie features 6 cap holes which have an easy-in/easy out system. Everything is very simple! Just push your favorite caps into the features from the back side and the snug fit will hold them securely in place. To change an already installed cap, just apply some pressure to the cap from the front side and it will pop out of the back and you're ready to install it's replacement. Six pack beer tote measure is follow: 25cm x 30cm x 19cm The size of each beer bottle holder is universal and meant for the 330ml or 500ml bottles. For construction use this assembly and application guide: https://www.youtube.com/watch?v=5D1xoh2RG2g Our Beer Crate very easy assembly and disassembly. Also Beer Boxes available in a different size and designs. All of them, you will find in our shop. We welcome custom orders. Please contact us with any questions. Orders ship in one day. Thank you for your order

Wall Clock CAPSBOARD WATCH Beer Gift Christmas Gift Gift for Him Wedding Gift Fathers Day How does the modern connoisseur of a foamy drink from malt and barley look like? Long-bearded and tattooed brutal, riding on the Harley? A thin drummer from a street rock band? Or a well-dressed intellectual in expensive glasses? Refreshing, with a heady aroma and a pleasant aftertaste after the first sips ... It's all about him. For More Wood Clocks: https://www.etsy.com/shop/BoardCaps?ref=search_shop_redirect§ion_id=23318410 Beer is equated to the drink of the gods. Admit that after these words you began to drool, and there was an irresistible desire to drink a glass of your favorite foam. How to surprise a beer lover? A box of beer is not a luxury and an unusual present, but rather an attribute of a pleasant pastime in the company of dear ones. And for the head this gift will be completely ugly. In this case beer souvenirs will be an interesting addition to the money present. For example, a wall clock. The watch became part of the image, the last element in the finished interior and just a stylish accessory. Perfect hours - what are they? The original watch model CAPSBOARD WATCH is made of waterproof plywood. It has really "male" arrows in the form of a wrench and a screwdriver. Despite the brutality of the signs, the annoying "tick" you will not hear - they are made with the mechanism of "quiet passage". The dial is decorated with stylish woodcarvings and twelve magnets, on which lids from beer bottles are securely attached. Thanks to this design, you can change the look of the clock every day and adjust them to the mood or "weather in the house", the interior of the room in which they will hang. And their appearance, they certainly will decorate the apartment, office, thematic institution. Watch-transformer: how to change them every day? Do you know why these watches have magnets instead of numbers? To make a banal piece of furniture an original souvenir. Instead of a classic and standard look, the wall clock acquires a stylish and masculine character. This is how the gift should look to the director from the team, to the beloved father, to the husband, to the father-in-law ... The bottle caps replacing the figures can be rearranged at least every day depending on: ● favorite beers; ● tried drinks abroad; ● clean or painted lids. But that's not all. You have the opportunity to change even the dial: from the classical style, which is represented by monophonic crowns, to an extravagant appearance with individual inscriptions, prints and carvings. The wall clock CAPSBOARD WATCH will fit into any interior of your home, office, PAB, restaurant or art cafe. For construction use this assembly and application guide: https://www.youtube.com/watch?v=WcW1FM0Hy0Y Such a beer gift to a man will appreciate everything Please contact us with any questions. Size: 11,8 inc x 11,8 inc (30cm x 30cm) Material: waterproof plywood

If you love beer you will love this beer bottle caddy! Our Beer Bottle holder is the perfect present for your beer lover. Moreover, our Wooden Box will be really useful in a pub, car or man cave as well! For More Beer Boxes: https://www.etsy.com/shop/BoardCaps?ref=search_shop_redirect§ion_id=23318408 These DIY Beer bottle four pack carriers have unique construction and made from plywood without glue, or screws. Also beer caddie features 4 cap holes which have an easy-in/easy out system. Everything is very simple! Just push your favorite caps into the features from the back side and the snug fit will hold them securely in place. To change an already installed cap, just apply some pressure to the cap from the front side and it will pop out of the back and you're ready to install it's replacement. Four pack beer tote measure is follow: 25cm x 30cm x 19cm The size of each beer bottle holder is universal and meant for the 330ml or 500ml bottles. For construction use this assembly and application guide: https://www.youtube.com/watch?v=Ywn8T9GPmRc Our Beer Crate very easy assembly and disassembly. Also Beer Boxes available in a different size and designs. All of them, you will find in our shop. We welcome custom orders. Please contact us with any questions. Orders ship in one day. Thank you for your order

If you love beer and looking for something outstanding, definitely you will love this beer bottle cap display! Our Europe Wooden Beer Cap Map is the perfect present for your second half or for someone who love traveling and beer, because it is the best way to display your travel. At the same time, it is nice design solution for pub, café, garage or man cave as well! For more Cap Maps: https://www.etsy.com/shop/BoardCaps?ref=search_shop_redirect§ion_id=23329803 Our Beer Cap Map holder made from high quality Europe plywood, this display map features 52 precision laser cut holes to securely hold your bottle caps collection. Unique construction allows to easy-in/easy out bottle caps. Everything is very simple! Just push your favorite caps into the features from the back side and the snug fit will hold them securely in place. To change an already installed cap, just apply some pressure to the cap from the front side and it will pop out of the back and you're ready to install it's replacement. For construction use this assembly and application guide: https://www.youtube.com/watch?v=jMg44eK6Woo Map measure: Size: 19.29 inc x 14.76 inc x 0,28 inc (49.5 cm x 37.5 cm x 0.7 cm) Holds 52 bottle caps. Material: waterproof plywood, stain Stones as a GIFT Four holes on the sides given the opportunity easy display map on the wall. We also include two special wooden pieces to display map on the table or on the shelf. We welcome custom orders. Please contact us with any questions. Orders ship in 10-15 days. If you need a rush order let us know and we'll try to accommodate it. Thank you for your order

Beer card made of wood CAPSBOARD UKRAINE CITY NIGTH - without special occasion will bring all friends to a party in a pub! Wooden gifts are not only fashionable, but also stylish. This wooden map of Ukraine will please the originality of its destination to your friends, brother. The map with the cities not only surprises will also serve as an occasion to gather cheerful companies in a pub or brewery to enjoy delicious kraft beer from Ukrainian brewers. Leave all the beer lids from the drunk bottles of beer kraft, write each of the names of your favorite friends and secure in CAPSBOARD UKRAINE CITY NIGTH. Gather a complete collection of beer caps and the card will serve as a bright decor for the house. For More Cap Maps of Ukraine: https://www.etsy.com/shop/BoardCaps?ref=search_shop_redirect§ion_id=23329809 For construction use this assembly and application guide: https://www.youtube.com/watch?v=fltctvlhhLI Size: 19,48 inc x 14,56 inc x 0,28 inc (49,5cm x 37,5cm x 0,7cm) Holds 68 bottle caps. Material: waterproof plywood, stain Stand as a gift

Wood Beer Cap Austria Map, Austrian Art, Beer Cap Holder Austria Hungary Map, Beer Lover Gift

Wood Angel can be a nice Christmas gift. What would make a better gift for a friend or family member in need, than a beautiful guardian angel wooden statue? This wood angel made using the technique of intarsia. Made of alder wood, parts glued to plywood and coated with polyurethane varnish. This wooden angel for wall can be an interesting gift, or some interesting part of home decor for children room. If you wish you can choose a special color. For this, before ordering, please contact us. So you can create your own wall hanging wooden angel, that will be a nice piece of home decor that will fill your heart with stunning view. Size: Length 15cm / 5.9 inches Height 14cm / 5.5 inches If you have some question feel free to contact us )) WOOD & STAIN Please keep in mind that, while we use the same wood, stains, and paints for each sign, pictures can vary due to lighting and editing. Each sign will be slightly different due to grain patterns in the wood and may or may not include knots. This ensures your sign is a unique, one of a kind piece! HANDCRAFTED While most of our orders are shipped and delivered on time, please know your sign may ship a few days later than its expected date as every sign is designed, handcrafted and made to order. Each one of our signs are made by hand from start to finish in our family-owned work shop. All of our ship & delivery dates are estimates based off of the quantity of orders we received at any point in time. If you need your order by a specific date, please let us know beforehand and we will try our best to meet your request. SHIPPING Usually from 2 to 4 weeks. But, can be some delay according to coronavirus restrictions, holydays etc ... Please, keep it on the mind. REFUND POLICY We gladly accept returns, exchanges, and cancellations of NON-CUSTOM items if we’ve been notified within 14 days of delivery. Buyers are responsible for return shipping and must ship items back within 30 days of delivery in order to receive refund. If the item is not returned in its original conditions, the customer will be responsible for loss in value. To request a cancellation, contact our shop within 24 hours of your purchase and we will happily refund your full purchase.Unless your item arrives damaged or defective, we do not accept returns for custom or personalized orders. If your custom order does arrive damaged, please contact us immediately for a refund or new sign. If you have any questions about your order, please feel free to send us a message.

Wood Angel can be a nice Christmas gift. What would make a better gift for a friend or family member in need, than a beautiful guardian angel wooden statue? This wood angel made using the technique of intarsia. Made of alder wood, parts glued to plywood and coated with polyurethane varnish. This wooden angel for wall can be an interesting gift, or some interesting part of home decor for children room. If you wish you can choose a special color. For this, before ordering, please contact us. So you can create your own wall hanging wooden angel, that will be a nice piece of home decor that will fill your heart with stunning view. Size: Length 15cm / 5.9 inches Height 14cm / 5.5 inches If you have some question feel free to contact us )) WOOD & STAIN Please keep in mind that, while we use the same wood, stains, and paints for each sign, pictures can vary due to lighting and editing. Each sign will be slightly different due to grain patterns in the wood and may or may not include knots. This ensures your sign is a unique, one of a kind piece! HANDCRAFTED While most of our orders are shipped and delivered on time, please know your sign may ship a few days later than its expected date as every sign is designed, handcrafted and made to order. Each one of our signs are made by hand from start to finish in our family-owned work shop. All of our ship & delivery dates are estimates based off of the quantity of orders we received at any point in time. If you need your order by a specific date, please let us know beforehand and we will try our best to meet your request. SHIPPING Usually from 2 to 4 weeks. But, can be some delay according to coronavirus restrictions, holydays etc ... Please, keep it on the mind. REFUND POLICY We gladly accept returns, exchanges, and cancellations of NON-CUSTOM items if we’ve been notified within 14 days of delivery. Buyers are responsible for return shipping and must ship items back within 30 days of delivery in order to receive refund. If the item is not returned in its original conditions, the customer will be responsible for loss in value. To request a cancellation, contact our shop within 24 hours of your purchase and we will happily refund your full purchase.Unless your item arrives damaged or defective, we do not accept returns for custom or personalized orders. If your custom order does arrive damaged, please contact us immediately for a refund or new sign. If you have any questions about your order, please feel free to send us a message.

Wood Angel can be a nice Christmas gift. What would make a better gift for a friend or family member in need, than a beautiful guardian angel wooden statue? This wood angel made using the technique of intarsia. Made of alder wood, parts glued to plywood and coated with polyurethane varnish. This wooden angel for wall can be an interesting gift, or some interesting part of home decor for children room. If you wish you can choose a special color. For this, before ordering, please contact us. So you can create your own wall hanging wooden angel, that will be a nice piece of home decor that will fill your heart with stunning view. Size: Length 15cm / 5.9 inches Height 14cm / 5.5 inches If you have some question feel free to contact us )) WOOD & STAIN Please keep in mind that, while we use the same wood, stains, and paints for each sign, pictures can vary due to lighting and editing. Each sign will be slightly different due to grain patterns in the wood and may or may not include knots. This ensures your sign is a unique, one of a kind piece! HANDCRAFTED While most of our orders are shipped and delivered on time, please know your sign may ship a few days later than its expected date as every sign is designed, handcrafted and made to order. Each one of our signs are made by hand from start to finish in our family-owned work shop. All of our ship & delivery dates are estimates based off of the quantity of orders we received at any point in time. If you need your order by a specific date, please let us know beforehand and we will try our best to meet your request. SHIPPING Usually from 2 to 4 weeks. But, can be some delay according to coronavirus restrictions, holydays etc ... Please, keep it on the mind. REFUND POLICY We gladly accept returns, exchanges, and cancellations of NON-CUSTOM items if we’ve been notified within 14 days of delivery. Buyers are responsible for return shipping and must ship items back within 30 days of delivery in order to receive refund. If the item is not returned in its original conditions, the customer will be responsible for loss in value. To request a cancellation, contact our shop within 24 hours of your purchase and we will happily refund your full purchase.Unless your item arrives damaged or defective, we do not accept returns for custom or personalized orders. If your custom order does arrive damaged, please contact us immediately for a refund or new sign. If you have any questions about your order, please feel free to send us a message.

Wood Angel can be a nice Christmas gift. What would make a better gift for a friend or family member in need, than a beautiful guardian angel wooden statue? This wood angel made using the technique of intarsia. Made of alder wood, parts glued to plywood and coated with polyurethane varnish. This wooden angel for wall can be an interesting gift, or some interesting part of home decor for children room. If you wish you can choose a special color. For this, before ordering, please contact us. So you can create your own wall hanging wooden angel, that will be a nice piece of home decor that will fill your heart with stunning view. Size: Length 15cm / 5.9 inches Height 14cm / 5.5 inches If you have some question feel free to contact us )) WOOD & STAIN Please keep in mind that, while we use the same wood, stains, and paints for each sign, pictures can vary due to lighting and editing. Each sign will be slightly different due to grain patterns in the wood and may or may not include knots. This ensures your sign is a unique, one of a kind piece! HANDCRAFTED While most of our orders are shipped and delivered on time, please know your sign may ship a few days later than its expected date as every sign is designed, handcrafted and made to order. Each one of our signs are made by hand from start to finish in our family-owned work shop. All of our ship & delivery dates are estimates based off of the quantity of orders we received at any point in time. If you need your order by a specific date, please let us know beforehand and we will try our best to meet your request. SHIPPING Usually from 2 to 4 weeks. But, can be some delay according to coronavirus restrictions, holydays etc ... Please, keep it on the mind. REFUND POLICY We gladly accept returns, exchanges, and cancellations of NON-CUSTOM items if we’ve been notified within 14 days of delivery. Buyers are responsible for return shipping and must ship items back within 30 days of delivery in order to receive refund. If the item is not returned in its original conditions, the customer will be responsible for loss in value. To request a cancellation, contact our shop within 24 hours of your purchase and we will happily refund your full purchase.Unless your item arrives damaged or defective, we do not accept returns for custom or personalized orders. If your custom order does arrive damaged, please contact us immediately for a refund or new sign. If you have any questions about your order, please feel free to send us a message.