Outdoor & Gardening

Table lamps for reading, Modern lights for bedroom, Table lamps for living room, Edison bulb lamp, Industrial pipe table lamp, Light rustic Table lamp "Faithful knight" vendor code 01-07 Height: 43 cm (1ft 4.93in). Weight: 8.7 kg (19lb 2.88oz). Frame diameter: 18 cm (7.48in). Stardarts for bulb: E12, E14, E17, E26, E27. Wire length: 70 cm (2ft 3.56in). Switch: on the wire, at a distance of 15-30 cm (5.91 - 11.8in) from the lamp. Switch is put on the wire, at the customer's order at any distance from the lamp. A light bulb is not included in the kit. The product is ready for use and meets all electrical standards. Materials: cast iron, steel, bronze, fireproof rubber plug. Paint (lacquer): American Accents. As the bottom of the lamp has a soft pad, it can be placed on any surface. Copies of the item can be produced within 5 days after order. They might have slight differences in a few details, however, the general concept of the original shall be preserved. Every lamp will be equipped with a plug of your country. Lamp can be operated at any temperature and humidity, in any room and withstands any fluctuations in the voltage of the electrical network. Table lamp is suitable for operation in any electrical network. ●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● If you have purchased one product, then for each additional 10% discount. * For purchase and delivery overseas please contact us via skype (bayarddd) or email (oleksiy.karpusenko@gmail.com)

   Hardened wood splitter! THE LOG  SPLITTER KIT FOR ELECTRIC MOTOR   Payment Details:     We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal. This product is one of our wood splitter screws, which we make during a four  years. We use a good 45c steel and make a right thickness of tip. Standard offer is lefthand thread. We can make a right thread, but it cost +10$.   Kit includes: - Cone for splitting wood - Two Bearings - Shaft - 100mm small pulley - Large 200mm Pulley - Two grooves - Two screws Diameter 80 [mm] Overall length 250 [mm] Working length 180 [mm] Pulleys   - Large 200mm 2x17HB or any yours dimentions               -  Small 100mm 2x17HB or any yours dimentions Steel grade Improved heat-C45   can be performed any under the  contract. Mounting Type - Counterpressure screw (2 pieces) After purchase, please let us know the hole diameter in  millimeters, and depth in millimeters. We make a screws with different diametres and length. Be free to ask.          Check out our other items! Thanks and good luck! Shipping Details:   Items comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome!  The payment for shipment is flat for all world: WE WILL COMBINE MULTIPLE WINS TO SAVE ON  Guarantee of qualitative packing   30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective, I will refund you the price you paid for it or replace it with identical one. Seller-online accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.  

Prefabricated birdhouse made of quality plywood. Assembled without glue or nails. It is easy to do with the following instructions. The instructions are attached. 6 "(14cm) wide, 8" (20cm) high, 6 "(14cm) deep. Packaged in a box. Suitable as a gift for a friend, adult, child, housewarming, and a gift for your garden!

Souvenir "Flag in a jar"

Hand-sculptured ceramic head planter for your favorite plants with tiny holes for earrings. The decorative hoop earrings, similar to those which you see in the video will be sent to you together with your order, but please pay attention - they are only for decoration, not for wearing! You can take them off and put your own ones in there. Most suitable for round earrings. This Lady has one hole for earrings on each side. You can also change the "hairdo" in the pot as often as you want to. An exclusive gift for any occasion. It can be also used for candies, nuts, jewelry or whatever you like)) It could perfectly complete a home interior or an office table. lt is glazed and fired at high temperature 2 times. High 12 (4,7) cm. The diameter is 6 cm. Exact repetition is impossible! If you order this item you'll get exactly the same planter that you see on the photos. Down you can see an autograph and a year of creating. Colour may vary from screen to screen. All our planters are totally hand sculptured, we do not use any forms.

Black and White series. Unique handmade ceramic flowerpot for your favorite plants. This is our maximal size for planters. Perfect housewarming present You can change the "headdress" in the pot as often as you want to. An exclusive gift for any occasion. It can be also used for candies, nuts, jewelry or whatever you like)) Оr cut the flowers shortly, fill with the water, and use it as a vase! It could perfectly complete home interior or an office table. lt is glazed and fired at high temperature 2 times. High 25 cm (9,05 inches). The diameter is 9 cm (3,5 inches) If you order this item you'll get exactly the same planter which you see in the pictures. Down you can see an autograph and a year of creating. Colour may vary from screen to screen. All our planters are totally hand-sculptured, we do not use any forms.

For all dino lovers!) This is a real multipurpose ceramic dino that can be used as a planter for your favorite plants or a jewelry bowl, or candies/nuts/berries bowl. That's due to your fantasy))) It could perfectly complete your home interior or an office table. lt is glazed and fired at high temperature 2 times. The high of the pot 8 cm (3,15 inches). The diameter is 8 cm (3,15 inches). The whole high till the end of dino's head is 19 cm (7,5 inches). Exact repetition is impossible! Colour may vary from screen to screen. Down you'll see an author's autograph and a year of creating.

For all dino lovers!) This is a real multipurpose ceramic dino that can be used as a planter for your favorite plants or a jewelry bowl, or candies/nuts/berries bowl. That's due to your fantasy))) It could perfectly complete your home interior or an office table. lt is glazed and fired at high temperature 2 times. The high of the pot 8 cm (3,15 inches). The diameter is 8 cm (3,15 inches). The whole high till the end of dino's head is 19 cm (7,5 inches). Exact repetition is impossible! Colour may vary from screen to screen.

This ceramic dog is made as a plant pot for the plants with a small root system (cactuses, succulents, etc.) or air plants. It can be also used as a bowl for your favorite candies, nuts, jewelry, berries or whatever you want)) An exclusive gift for any occasion. It could perfectly complete your home interior or an office table. lt is glazed and fired at high temperature 2 times. High 7 cm (2,8 inches). The diameter is 7,5 cm (2,95 inches) Exact repetition is impossible! Colour may vary from screen to screen.

And we continue to show our new planters - Princesses. This is self sculptured ceramic flowerpot for your favorite plants. You can change the "headdress" in the pot as often as you want to. An exclusive gift for any occasion. It can be also used for candies, nuts, jewelry or whatever you like)) It could perfectly complete a home interior or an office table. lt is glazed and fired at high temperature 2 times and 1 time at a lower temperature with a golden glaze. High 12 (4,7 inches) cm and plus a crown. The diameter is 6 cm (2,3 inches). Unique item! Exact repetition is impossible! If you order this item you'll get exactly the same planter which you see on the photos. Down you can see an autograph and a year of creating. Colour may vary from screen to screen.

Oh, she is really awesome!! Lady in blue) Handmade ceramic flowerpot for your favorite plants. This is our maximal size for planters. You will be smiling every time as you will see this Lady pot!) You can change the "headdress" in the pot as often as you want to. An exclusive gift for any occasion. It can be also used for candies, nuts, jewelry or whatever you like)) Оr cut the flowers shortly, fill with the water, and use it as a vase! It could perfectly complete home interior or an office table. lt is glazed and fired at high temperature 2 times. High 25 cm (9,8 inches). The diameter is 9 cm (3,5 inches) If you order this item you'll get exactly the same planter which you see on the photos. Down you can see an autograph and a year of creating. Colour may vary from screen to screen. All our planters are totally handmade, we do not use any forms.

Hand-sculptured ceramic head planter for your favorite plants with tiny holes for earrings. The decorative hoop earrings will be sent to you together with your order, but please pay attention - they are only for decoration, not for wearing! You can take them off and put your own ones in there. Most suitable for round earrings. This Lady has three holes for earrings on each side. You can also change the "headdress" in the pot as often as you want to. An exclusive gift for any occasion. It can be also used for candies, nuts, jewelry or whatever you like)) It could perfectly complete a home interior or an office table. lt is glazed and fired at high temperature 2 times. High 12 (4,7) cm. The diameter is 6 cm. Exact repetition is impossible! If you order this item you'll get exactly the same planter which you see on the photos. Down you can see an autograph and a year of creating. Colour may vary from screen to screen. All our planters are totally hand sculptured, we do not use any forms.

While we are waiting for real tulips and hyacinths outside, we make planters with painted ones)) Hand sculptured planter for your favorite plants! You can change the hairdo as often as you like. A unique gift for any occasion. Also can be used as a multipurpose bowl, for candies, nuts, jewelry, make-up accessories, or whatever you like)) It's all about your fantasy! It could perfectly complete home interior or an office table. lt is glazed and fired at high temperature 2 times. High 15 cm (5,9 inches). The diameter is 8 cm (3,14 inches). Exact repetition is impossible! Colour may vary from screen to screen. I always try to make pictures holding the item in my hand, so you can better imagine the size. Please, look at the pictures attentively, they are an essential part of the description. If you order this item you'll get exactly the same planter which you see in the pictures. Down you'll see an autograph and a year of creating. All our planters are totally hand-sculptured, we do not use any forms.

And we continue to show our new planters - Princesses. This is self sculptured ceramic flowerpot for your favorite plants. You can change the "headdress" in the pot as often as you want to. An exclusive gift for any occasion. It can be also used for candies, nuts, jewelry or whatever you like)) It could perfectly complete a home interior or an office table. lt is glazed and fired at high temperature 2 times and 1 additional time at a lower temperature with a golden glaze. High 12 (4,7 inches) cm and plus a crown. The diameter is 6 cm (2,4 inches). Unique item! Exact repetition is impossible! If you order this item you'll get exactly the same planter which you see on the photos. Down you can see an autograph and a year of creating. Colour may vary from screen to screen.

Handmade ceramic flowerpot for your favorite plants in retro style. You will be smiling every time as you will see this Lady pot!) You can change the "headdress" in the pot as often as you want to. An exclusive gift for any occasion. It can be also used for candies, nuts, jewelry or whatever you like)) Оr cut the flowers shortly, fill with the water, and use it as a vase! It could perfectly complete home interior or an office table. lt is glazed and fired at high temperature 2 times. High 15 cm (5,8 inches). The diameter is 8 cm (3,15 inches) Exact repetition is impossible! Colour may vary from screen to screen.

Our new planters "Ladies with their Pets"!) Hand sculptured ceramic face planter for your favorite plants! You can change the hairdo as often as you like. Also can be used as a multipurpose bowl, for brushes, for candies, for make-up accessories, and so on)) It's all about your fantasy! Can be also used as a flower vase. Unique housewarming gift for home decor, or your office desk! lt is glazed and fired at high temperature 2 times. High 16 cm (6,2 inches). The diameter is 8 cm (3,15 inches) Exact repetition is impossible! Colour may vary from screen to screen. Down on the inner side you can see an autograph and a year of creating. All our planters are totally hand sculptured, we do not use any forms. If you order this planter you will get exactly the one which you see in the pictures. Thus, please, look attentively at the photos, they are an essential part of the description. I also try to make the pictures with the planter in my hand so you can imagine its size more clearly.

Air circulation inside the mini-greenhouse is very important for plants. Specially designed fans for mini-greenhouses make possible quick installation on a metal frame with a diameter of 12 mm. With the help of a quick-release plastic bracket, you can install them in any part of the greenhouse and adjust the angle of inclination from 90 to 180 degrees. Mini-greenhouse coolers have sufficient speed for good air circulation and control of humidity level inside. The optimal speed of fan rotation is selected for the most comfortable noise level for people - it is almost soundless. The power connection system makes it possible to connect ventilators to our mini-greenhouses quickly and without additional wires. Our fans will be very useful for your plants. About this item • Three built-in fans provide air circulation with speed up to 4000 rpm. and don’t make any noise in the same time • Grow fans have all the necessary wires for connection with Sezam XL indoor mini greenhouse for plant care and germination. • Plant fans has a good and quality design: quality bearing, pure copper wire, resistant to high temperatures. • They have fasteners that ensure quick installation on the frame tube of a mini greenhouse with a pipe diameter of 12 mm. • Indoor grow fans are additionally treated with hot glue for better moisture resistance and this is a plus if you are going to use a humidifier inside the mini greenhouse.

The vintage mailbox was made of metal in the USSR in 1970s . The large mail box is in good condition. Vintage - outside and inside has some traces of time, there are scratches and rust. The mailbox is made of durable thick metal, so it will last for many years. Please note that this mailbox can only be opened from the back; there is a lock on the back of the box that can be opened from the back of the mailbox. See the latest photos. Therefore, if you want to use it, the mailbox must be attached to the fence to which you can come from behind. You can use the mailbox to make amazing decor in the house, in the garden, on the farm. Dimensions: - height 14.56 inches (37 cm), - width 9.84 inches (25.5 cm), - depth 2 inches (5 cm). - weight 2000 gr. Please note: -All photo are real. -Real colors may vary slightly from their appearance on the screen. All goods will be packed and shipped by international airmail with tracking number for 1 - 3 days. Delivery usually takes about 1-3 weeks. The buyer pays the customs duties and taxes associated with the delivery to his country. If you buy 2 or more items, this will allow you to save on shipping, but the exact price is unknown, so before buying 2 or more items, contact me. Do not hesitate to contact us if you have any questions or suggestions. Thank you for visiting my store, I wish you a pleasant day!

Vintage mailbox was made of metal in 1981 in the USSR. The large mail box is in good condition. Vintage - outside and inside has some traces of time. This mailbox has been repainted. It can be easily attached to the wall, to the fence or to the door, for this there are two holes in the back of the box. In this retro box there is no lock and key. In order to take out the mail from this mailbox, you will need to hang a small lock where they get the mail. The mailbox is strong and powerful, without dents. You can use the mailbox to make amazing decor in the house, in the garden, on the farm. Dimensions: - height 15.35 inches (39 cm), - width 9.84 inches (25 cm), - depth 3.14 inches (8 cm). - Weight 2200 gr. Please note: -All photo are real. -Real colors may vary slightly from their appearance on the screen. All goods will be packed and shipped by international airmail with tracking number for 1 - 3 days. Delivery usually takes about 1-3 weeks. The buyer pays the customs duties and taxes associated with the delivery to his country. If you buy 2 or more items, this will allow you to save on shipping, but the exact price is unknown, so before buying 2 or more items, contact me. Do not hesitate to contact us if you have any questions or suggestions. Thank you for visiting my store, I wish you a pleasant day!

Winter worm with hat and scarf. Write the color of the hat and scarf in the comments . Size 2 inches (10 cm.) Handmade from cotton yarn and filled with hypoallergenic filling. Thanks for you purchase! I will come to you from Ukraine.

Winter worm with hat and scarf. Write the color of the hat and scarf in the comments . Size 2 inches (10 cm.) Handmade from cotton yarn and filled with hypoallergenic filling. Thanks for you purchase! I will come to you from Ukraine.

Handmade from Ukraine The figurines are maintenance-free, moisture and UV resistant. We can custom-make absolutely any sculpture made of artificial grass and with metal inserts. we will make this sculpture for you in 2 weeks The price of the figure is $ 2980 with delivery to the customer's door. Delivery: There will be air. Material: metal Fiberglass Artificial grass 1.7 (45 mm) inches (Belgium) sculpture weight 99.2 lbs. The size of the wolf is 53.1 (135 cm) high, 55.1 (140 cm) long and 25.6 (65 cm) deep. in life he is even more beautiful !! made of materials that cannot be destroyed by weather conditions. The artificial grass sculpture is unique and requires absolutely no maintenance. A great option for decorating the yard and landscape design. Tel. 38068 856 15 91 (WhatsApp, Viber, Telegram) write with pleasure I will answer

The "Airwood Euro-h BM" solid fuel stove is lightweight, compact, and simply indispensable in conditions with limited wood and time! Thanks to the air pressurization block, the stove provides powerful heating even when using wet wood and quickly brings water to a boil. The boiling time for 0.26 gallons of water is 5 minutes or more, depending on the quality of the fuel and the surrounding environment.  The burner has a fuel combustion efficiency of up to 80%, compared to the 5-7% efficiency of a regular campfire. This is because the smoke from the wood contains about 90% of particles that did not burn due to lack of oxygen. When fresh air is introduced to certain areas of the burner's combustion chamber, these small particles can be burned. This is the principle on which this burner is built: cold air from the air intake enters the side opening of the lower outer wall of the burner housing. Under the action of the fan, one part of the air is forced into the openings at the bottom and lower part of the combustion chamber, while the other is directed upwards between the walls of the combustion chamber and the housing. There, as it is heated, it exits through special openings and enters the upper part of the combustion chamber, providing ignition of the wood gas. Where the air exits, tongues of intense flames are formed due to the enrichment of oxygen. On the stove, food (soup, porridge, tea, etc.) with a volume of up to 0.8-1.1 gallons can be cooked effortlessly. Branches, twigs, kindling, and any other available solid fuel can be used as fuel. Air injection block (air blower) for the combustion chamber is equipped with a three-position switch with the following modes: Middle position - "Off" (the stove operates in natural draft mode with the air injection block disconnected); Upper position - "High speed" (~ 3000 rpm) - for quick ignition and boiling water; Lower position - "Low speed" (~ 2000 rpm) - for maintaining high-temperature flame The fan of the air injection block is powered by 2 AA batteries with a voltage of 3 V. Continuous operation time of the block from AA batteries: • in "High speed" mode: ~ 30 hours; • in "Low speed" mode: ~ 50 hours; The air injection block is equipped with a motor shielded from thermal radiation and dust-moisture insulation at the IP55 protection class level. This improvement allows the stove owner to use it in conditions of increased humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the motor will fail at the most inappropriate moment. The burner comes equipped with an updated version of a foldable stand for cookware. This accessory has increased heat resistance and is specially designed for more stable placement of round pots with wide bottoms on the burner. The stand will be appreciated by fans of morning coffee in nature made in a Turkish coffee pot with a small diameter bottom. Thanks to its foldable legs, the stand is "convenient" for cookware with bottom diameters ranging from 1.97 and 9.84 inches! After the legs are opened, they are fixed at a certain angle to the horizon, ensuring a reliable grip on the bottom of the cookware. When the load is increased, the legs take a horizontal position, and the upper part of the stand's fabric spreads slightly outward around the entire circle, increasing the rigidity of the stand and the stability of the cookware.   The new stand differs from the previous version in the presence of ventilation holes in the shape of the manufacturer's brand name. This change reduced the total area of ventilation holes on the stand's fabric, which improved the wind protection characteristics of the stand and increased the burner's power. Additionally, the text on the stand allows for easy differentiation between the original product and a copy. The height of the stand's fabric was also reduced, increasing the construction's rigidity and improving the heating of the cookware's bottom.  The new combustion chamber installed in the burner is significantly different from the old version: the quantity, diameter, and configuration of the air injection holes have been changed to improve the quality of wood burning in the lower part of the chamber. It was possible to eliminate clogging of the chamber with smoldering coal and improve the burning of wet wood, thus maximizing the adaptation of the burner to real hiking conditions where dry wood is scarce. In addition, the new version of the chamber ensures stable fuel burning in natural draft mode (with the pump block disconnected from the burner) - this feature is very important for cooking dishes that do not require intense flames.  The outer casing of the solid fuel burner "Airwood Euro-h BM" has a closed bottom, which creates a sealed space between the two walls of the burner (between the combustion chamber and the casing), meaning that all air from the blower unit (air supply) is guaranteed to be delivered to the combustion chamber. Therefore, there is no need to search for a flat surface to place the burner, as it can even be used in a suspended state! Another advantage of the burner with a closed bottom casing is that there are no burns left on the ground after use, as there are after a bonfire.  In this model of burner, the casing is equipped with a removable handle holder, which allows you to change the position (adjust) or move the burner during its operation (burning). This option will come in handy in case of sudden weather changes - you can quickly and safely move the burner to a more sheltered place in case of sudden rain or gusts of wind. Features: • Metal material: stainless steel of various grades and thicknesses (0.01 in-0.03 in); • Combustion chambers: ◦ from 300 to 800 and more hours of burner operation depending on storage and usage conditions; ◦ volume of 23.3 fl oz; Dimensions: ◦ in packaged state: height of 4.7 in, diameter of 4.7 in; ◦ during use: height of 6.3 in, diameter from 4.7 in to 6.3 in; • Total weight of burner with case, batteries, and handle grip: 1.06 lbs . Package includes: 1. Burner body assembled with combustion chamber and bottom;  2. Reinforced heat-resistant folding stand for cookware;  3. Air compression unit powered by two AA batteries;  4. Detachable handle grip for the burner;  5. Case made of strong waterproof Oxford fabric;  6. Instructions for using the burner;  7. Two adapters for AAA batteries to AA batteries.

This solid fuel turbojet engine model is specifically designed for long-term operation in challenging environmental conditions, and the forced air supply unit can be powered by any external power source with a voltage of 3-6V, which has a USB output.   The Airwood Heavy Duty USB-h BM camping stove will be a reliable companion for travelers who enjoy long trips (a month or more) in a marine, tropical climate, or in other aggressive environments for metal products. All connections of the utensil stand and combustion chamber are made with stainless steel fasteners. All the most vulnerable parts of the stove are made of highly corrosion-resistant stainless steel! The forced air supply unit of the Airwood Heavy Duty USB-h BM stove can be powered by a Power Bank, Power Box BM power module, solar panel with built-in battery, smartphone connected via OTG cable, or any other external power source with a constant voltage of 3-6V that has a USB output or a 0.22 inches x 0.08 inches DC plug.  Thanks to the air injection block, the burner provides powerful heating even when using raw wood and quickly brings the water capacity to a boil. The boiling time of 0.26 gallons of water is from 5 minutes, depending on the quality of the fuel and the surrounding environment.   The burner has a fuel combustion efficiency of up to 80%, unlike the 5-7% efficiency of regular bonfires. This is because about 90% of the particles in the smoke from the wood are unburned due to lack of oxygen. When fresh air is injected into certain parts of the burner combustion chamber, these fine particles burn. This is the principle behind this burner: cold air from the injection block enters the side hole at the bottom of the outer wall of the burner housing. Under the action of the fan, one part of the air is injected into the holes in the bottom and lower part of the combustion chamber, while the other is directed upward between the walls of the combustion chamber and the housing, where it is heated and exits through special holes, entering the upper part of the combustion chamber and igniting the wood gas.   Where the air exits, intense flames are formed due to oxygen enrichment.  The burner can be used to cook food (soup, porridge, tea, etc.) with a volume of up to 0.79-1.06 gallons without any effort.  Branches, twigs, bark, and any other readily available solid fuel are used as fuel.   The air supply (blower) block for the combustion chamber is equipped with a DC input connector (socket) (0.22 inches * 0.08 inches.) with a hinged cap-plug to protect the connector from contamination, and a switch with the following modes: Upper position - "High speed" - for instant ignition and water boiling, Lower position - "Low speed" - to maintain high-temperature flames.  The current consumed by the blower block depends on the voltage of the power supply: • in "High speed" mode: 70-100mA; • in "Low speed" mode: 20-50mA;   In the air compressor unit, there is an engine with thermal radiation and dust-humidity protection at the IP55 protection level. This improvement allows the owner of the burner to use it in conditions of high humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the engine will fail at the most inappropriate moment.   The burner also operates in natural draft mode, for which it is sufficient to disconnect  the air compressor unit from the burner body. This mode is suitable for cooking dishes that do not require a strong flame, such as porridge.   The burner comes with a folding stand for cookware. This burner component has increased heat resistance and is specially designed for more reliable placement of round pots (pans) with a wide bottom on the burner. However, the stand will also be useful for fans of morning coffee in nature, prepared in a Turkish coffee pot (a dish with a small bottom diameter), because thanks to the folding legs, the stand will be "convenient" for dishes with a bottom diameter of 1.97 inches and 9.84 inches.!   After unfolding, the legs are fixed at a small angle to the horizon, ensuring reliable grip of the dish's bottom. When the load increases, the legs take a horizontal position, and the upper part of the stand's canvas diverges slightly outward around the entire circle, increasing the rigidity of the stand and the stability of the dish on it.   The new combustion chamber installed in the burner is significantly different from the old version: the quantity, diameter, and configuration of the air injection holes have been changed to improve the quality of the burning of the wood in the lower part of the chamber. These changes have eliminated the problem of clogging the chamber with smoldering coal and improved the burning of raw wood, thereby maximizing the adaptation of the burner to real field conditions, where dry wood is rare. In addition, the new version of the chamber ensures stable fuel burning in natural draft mode (with the booster disconnected from the burner) - this feature is very important for cooking dishes that do not require intense flame.   In this burner model, the combustion chamber has thicker walls and a larger volume compared to the chamber of the classic "Airwood BM" series turbo-burners. All chamber elements are made of highly corrosion-resistant stainless steel. The combustion chamber is assembled with the body in a rigid screw connection with the standard dimensions for the "Airwood BM" series turbo-burners.   The outer casing of the "Airwood Heavy Duty USB-h BM" burner has a closed bottom, which creates a sealed space between the two walls of the burner (between the combustion chamber and the casing), ensuring that all air from the air supply unit is directed into the combustion chamber. This means that there is no need to search for a flat surface to place the burner on, as it can even be used in a suspended state! Another advantage of the burner with a closed bottom casing is that after use on the ground, there are no burn marks left behind like with a bonfire. The bottom of this model is made of highly corrosion-resistant stainless steel.  To remove the ashes after use (once the burner has cooled), it is sufficient to remove the cooking stand and air supply unit from the burner and shake out the ashes from the combustion chamber by turning the burner upside down. Any remaining ash between the combustion chamber and the casing can easily be shaken out through the large opening on the side of the casing, to which the air supply unit is attached during burner operation.   In this model of the burner, the housing is equipped with a removable handle-holder that allows you to adjust the position or move the burner during its operation (burning). This feature will come in handy in case of sudden weather changes - you can quickly and safely move the burner to a more protected place in case of sudden rain or gusts of wind. Features: Metal material: stainless steel of various grades and thicknesses (0.01 in-0.03 in); Combustion chamber: resource: from 800 hours of burner operation depending on storage and operation conditions; volume 830ml; Dimensions: in the package: height 5.3 inches, diameter 4.7 inches; during use: height 6.9 inches, diameter from 4.7 inches to 6.3 inches; Total weight of the burner together with the cover, handle holder, and USB-DC cable - 1.2 lbs.  Package includes: 1.Burner housing assembled with bottom and high corrosion-resistant combustion chamber; 2. Reinforced heat-resistant folding stand for cookware; 3. Air supply unit with speed switch and DC connector 0.22 inches x 0.08 inches; 4. Detachable burner handle-grip; 5. USB-DC cable; 6. Strong waterproof "Oxford" fabric cover; 7. Instructions for use.