Накладки на пороги Infiniti QX70 (FX) 2008+  Материал нержавеющая сталь. В комплекте 4 подушечки  Надпись ИНФИНИТИ.  Обычай. Возможен заказ с надписью Ваня.  Крепление на металлические пороги автомобиля. Лента монтажная типа 3м.  Доставка по всему миру.

Автомобильные светодиодные накладки на пороги Infiniti QX80 2013+ Материал нержавеющая сталь. В комплекте 4 подушечки  Надпись ИНФИНИТИ.  Обычай. Возможен заказ с надписью Ваня.  Крепление на металлические пороги автомобиля. Лента монтажная типа 3м.  Доставка по всему миру.

Car led door sills Citroen C-Elysee 2012+ Material stainless steel. Includes 4 pads  Inscription C-Elysee  Custom. Possibility of the order with Vanya inscription.  Fastening on metal thresholds of a car. Mounting tape type 3m.  Delivery worldwide.

Led door sills Citroen C-Crosser 2007-2012 with logo C-Crosser lettering in blue includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Citroen C-Crosser 2007-2012 lettering in blue includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  - Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Door sills Dodge Durango 3 2010+ Material stainless steel. Includes 4 pads  Inscription DURANGO. Custom. Possibility of the order with Vanya inscription.  Fastening on metal thresholds of a car. Mounting tape type 3m.  Delivery worldwide.

Door sills with illumination Toyota Rav4 IV 2013-2018+ with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Dodge Charger with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors. -This is what makes our products so beautiful and unique!

Door sills Toyota Auris II 2013+ Material stainless steel. Includes 4 pads  Inscription AVENSIS. Custom. Possibility of the order with Vanya inscription.  Fastening on metal thresholds of a car. Mounting tape type 3m.  Delivery worldwide.

Car led door sills Toyota Tacoma III 2016+ with logo TRDpro includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Toyota Tacoma III 2016+ with logo TRDpro includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills HUMMER H2 RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: HUMMER H2 with stainless steel includes 2 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Carled door sills Honda Accord X 2018-2022 Inscription ACCORD. Honda Accord X 2018-2022 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Honda Accord X 2018-2022 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Toyota Tundra II 2007-2013 with logo TRDpro Toyota Tundra II 2007-2013 included 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Toyota Tundra II 2007-2013 included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Toyota Corolla XI 2013-2019 Toyota Corolla XI 2013-2019 includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Led door sills Toyota Tundra III 2014+ Material stainless steel. Includes 4 pads  Inscription TUNDRA. Custom. Possibility of the order with Vanya inscription.  Fastening on metal thresholds of a car. Mounting tape type 3m.  Delivery worldwide.

Car led door sills Toyota Tacoma III 2016+ included 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Toyota Tacoma III 2016+ ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Led door sills Toyota Tacoma III TRDpro 2019-2023 Toyota Tacoma 3 TRDpro 2019-2023 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Toyota Tacoma 3 TRDpro 2019-2023 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Car led door sills Chevrolet Volt 2015-2019 Chevrolet Volt 2015-2015 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed/ by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Chevrolet Volt 2015-2019 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills  Toyota Tundra 2017+ with logo TRD pro Toyota Tundra 2017+ with logo TRDpro with stainless steel includes 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Светодиодные накладки на пороги Toyota Tundra 2017+ с логотипом Tundra. Toyota Tundra 2017+ с логотипом Тундра. В комплекте 4 штуки.  Стальные подножки RS Custom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех Toyota Tundra 2017+ с нержавейкой в комплекте 4 шт. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Castom обеспечивает идеальную посадку.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я нструкц и я ① Поместите крышку RS Custom на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт. Ваш продукт RS Custom будет выглядеть по-другому при солнечном свете, чем в помещении. Именно это делает нашу продукцию такой красивой и уникальной!

Car led door sills Mitsubishi Lancer X RALLIART 2008+ Mitsubishi Lancer X RALLIART with stainless steel includes 4 pieces.  RSCastom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look.  This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Mitsubishi Lancer X RALLIART with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Car led door sills Honda Accord 8 2008-2013 Honda Accord 8 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon Honda Accord 8 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Hyundai Tucson II 2015+ Honda Accord 8 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon Hyundai Tucson II 2015+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Led door sills Hyundai Sonata VIII 2020+ Hyundai Sonata VIII 2020+ with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Hyundai Elantra VI (AD) 2016+ Hyundai Elantra VI (AD) 2016+ with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon Hyundai Elantra VI (AD) 2016+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Led door sills Lincoln MKX II 2016-2018 with logo MKX  Steel Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Lincoln MKX II 2016-2018 with logo MKX included 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. ⚠ I n s t r u k c and I ① Place the  cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your  product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!