LASER emitting head VLOK ILIB 520-525nm2mVt green spectrum MATRIX-LAZMIK NEW , MATRIX-VLOK replaces three heads: CL VLOK (wavelength of 0.63 microns, the power of 1.5-2.0 mW) VLOK CL-M (wavelength of 0.63 microns, the power of 15-20 mW) and VLOK MS-365 (wavelength 0.365 micron, power 1.0 mW) During the VLOK procedures are used sterile disposable fibers KIVL-01 with a needle,  which are connected to a special terminal emitter.  It provides for continuous adjustment and digital control of the radiation power.  The device has an automatic timer and digital display duration of the procedure.   By unit MATRIX-VLOK attached manual, as well as detailed guidelines for use in the  treatment of various diseases - Hejnice AV, SV Moskvin, GA Azizov  "Intravenous laser irradiation of blood", Moscow, 2006, 250 p. Laser and LED emitting head to the unit MATRIX-VLOK: 1 CR-VLOK Laser head with a red emitter (0.63 micron) light 4.5 mW (1.5 mW output from the fiber KIVL-01) 2 CR-VLOK-M Laser head with a red emitter (0.63 micron) light output of 30 mW (15 mW output from the fiber KIVL-01) 3 VLOK CL-405 laser head with a blue emitter (0.405 m) of light output of 2 MW (1 MW output from the fiber KIVL-01) 4-KL-532 VLOK Laser head with green emitter (0.532 m) of light output of 2 MW (1 MW output from the fiber KIVL-01) 5 CL VLOK-infrared laser head with an infrared emitter (IR - 0.89 microns) to 80 mW of light (35 mW output from the fiber KIVL-01) 6 MS VLOK-365 LED emitter head with UV (ultraviolet - 0.365 micron) light output of 2 MW (1 MW output from the fiber KIVL-01) 7 VLOK MS-450 LED head with a blue emitter (0.45 m) Light output of 2 MW (1 MW output from the fiber KIVL-01) 8 VLOK MS-530 LED emitter head with a green (0.53 m) Light output of 2 MW (1 MW output from the fiber KIVL-01)      SPECIFICATIONS: Radiation mode Continuous Laser Type Semiconductor Wavelength, microns (base emitter) 0.63 The radiation power, mW, not less (base emitter) 4.5 The radiation power of the output optical fiber KIVL 01 mW, at least (emitter base) 1.5 Reference mode Automatic exposure time  Exposure time, min 1 ... 10 Step 1 min 10 ... 40, step 5 min Power supply: voltage, frequency, Hz 220 ± 22 50 ± 0.5 Maximum power consumption, W 10 Operation mode setup time, with no more than 4 Operating temperature range, ° C -10 ... +35 Overall dimensions 210 x 180 x 100 Weight, kg 2 The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me. ALL international buyers are Welcome!   The  shipping is flat for all world:   FREE SHIPPING  WORLDWIDE  WE WILL COMBINE MULTIPLE WINS TO SAVE ON  SHIPPING Guarantee of qualitative packing 30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective.  We will refund you the price you paid for it or replace it with identical one.  We accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.   Thanks and good luck! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Laser head emitting 525 nm 50 mW green spectrum MATRIKS- LAZMIK 2016 NEW Characteristics Laser power: 120 mW Laser wavelength: 0.405 m Light mode: Continuous application Photodynamic therapy with 5-aminolevulinic acid. Biology (stimulation of stem cells and tissues in culture) Neurology: stimulation of regeneration of damaged nerves, rehabilitation  of patients with spinal trauma, cosmetology: laser phoresis hyaluronic acid (laser or laser skin gialuronoplastika biorevitalization)  for introducing bezinektsionnogo specially made of hyaluronic acid in the skin Laser biorevitalization The technique developed laser phoresis hyaluronic acid proved to be so effective,  and the results are so impressive that it has received its own name  - the technology LAZMIK ®, which is fundamentally different from their foreign  counterparts not only the price (on average ten times cheaper),  but significantly better results, which is provided by several factors: administration to the skin up to 100% of hyaluronic acid in the gel composition; delivery into the skin not only hyaluronic acid, but also other components  required skin, including inorganic (copper, zinc, etc...); delivery of active ingredient from the gel into the deeper layers of the skin,  providing a more stable effect that lasts a long time (up to 6 months.) a much broader range of indications for use; strong synergism of the drug and the low-intensity laser radiation, which also provides a prolonged effect. Immediate visible effect occurs immediately after the first treatment  and lasts for 2-3 weeks, the course results are stored up to 6 months.,  And for the regular (monthly) supports the effect of constant care. A noticeable smoothing of the surface and the average depth of wrinkles,  excellent results can be seen immediately after the procedure. Unprecedented Performance treating periorbital wrinkles (around the eyes, in t. Ch. "Crow's feet"). Restoring physiological hydration of the skin, neck, décolleté and hands. Return the volume and density of the skin, giving it a healthy shine and velvety. Fast skin recovery and solar thermal burns. Accelerated healing of fresh traumatic and operational scars. The volume distribution of hyaluronic acid in the skin is much more even  and deeper than other methods of injection and injection of hyaluronic acid. The results of the course LAZMIK® far exceed the effects of similar foreign techniques. Excellent results on cellulite and other programs cosmetic procedures. The absence of contraindications, side effects and recovery period. The procedure can complement and extend the action to other methods used in cosmetology. The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me. ALL international buyers are Welcome!   The  shipping is flat for all world:   FREE SHIPPING  WORLDWIDE  WE WILL COMBINE MULTIPLE WINS TO SAVE ON  SHIPPING Guarantee of qualitative packing 30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective.  We will refund you the price you paid for it or replace it with identical one.  We accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.   Thanks and good luck! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Laser head emitting 904 nm 20 W infrared spectrum for MATRIKS- LAZMIK 2016 NEW Laser Light is manifested in a very multi-level impact the body from occurrence of a temperature gradient, the excited states and conformational rearrangements of molecules to respond complex adaptive neuroreflex and neurohormonal Reactions with activation of the immune system at the level of the organism. After the exposure of the surface with laser light on the skin, sub- skin fat, fat accumulation and muscle occur The following positive changes as a complex response re- promotion of the human body: - There is the elimination of inflammatory processes; - There is a growing microcirculation and provide trophic cheniya tissue; Fig. 2. Changing the concentration Ca2 + (1) in the cytosol and the redox potential mitochondria m (2) under the influence of laser light (wavelength 647 nm, 0.1 mW / cm2, 15 sec exposure) on human foreskin fibroblasts (Alexandratou E. et al., 2002) eleven I. Laser therapy - Normalization of the local and general immunity, a number of techniques ime- a place antibacterial action; - Slows down the aging of cells and extracellular connective tissue or while updating them; - Normal operation of the antioxidant system, predotvrascha- etsya the ravages of free radicals; - Reduced levels of lipofuscin in the skin cells; - Increased efficiency of oxygen exchange of skin cells; - Destructured derived proteins, which prevent the formation of the normal structure of the collagen-elastin matrix; - Activated fibroblasts synthesis of high molecular hyper- aluronovoy acid, restores a normal balance of its fractions; - Carried out the reconstruction of the dermis due to streamlining structures Tours elastic collagen fibers with the restoration of the aqueous sector and a decrease in the amount of colloidal masses; - Improves elasticity of the skin, increases its elasticity; - Normalized thickness of the epidermal layer by increasing the number of mitosis and reduce desquamation; - Increasing the number of active sweat and sebaceous glands normalization of the functioning of maintaining homogeneity; - Recorded in its natural localization cluster Zhi- rovoy tissue, muscle mass increases at the same time improved metabolic processes and as a result vyshepe- subjects listed changes - reducing the degree of sagging (ptosis); - Stimulates hair growth due to the strengthening of microcirculation and nutrition of tissues. The maximum result of combined laser therapy can be pre- Stitch only for its systematic and long-term use! first first results can be expected for 2-3 minutes procedure, but sometimes only 10-20 sessions. To consolidate the effect is necessary to conduct prevention courses 3-4 times per year, each of which comprises not less than 10 sessions. Laser treatment and prevention of many diseases as well as cosmetic procedures, - process di- dynamical, passing under the mandatory supervision of specialists. One of the features of laser therapy (RT) is an unprecedented opportunity of its effective combination of The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me. ALL international buyers are Welcome!   The  shipping is flat for all world:   FREE SHIPPING  WORLDWIDE  WE WILL COMBINE MULTIPLE WINS TO SAVE ON  SHIPPING Guarantee of qualitative packing 30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective.  We will refund you the price you paid for it or replace it with identical one.  We accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.   Thanks and good luck! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

EFFECTS OF INTRAVENOUS  LASER IRRADIATION OF BLOOD Stimulation of immune response, specific and non-specific Increase of serum content of  IgG, IgM and IgA Stimulation of interferons, interleukins and TNF-alpha Increase DNA synthesis of lymphocytes, stabilize ratio of subpopulation of T-helper / T-suppressor cells Increase of phagocytic activity of macrophages Lowering of C-reactive protein (CRP) Improvement of the anti-oxidant enzymatic system with antitoxic effect in response to the increase in the content of reactive oxygen species (ROS), detectable when exposed to LLLT across the spectrum Improvement of regeneration of erythrocytes and of microcirculation Reduction of aggregation of thrombocytes Activation of fibrinolysis Stimulation of the NO-production in monocytes with vasodilatation and improvement of endothelial dysfunction Fusion of mitochondria to “giant mitochondria” with increase of ATP-production in the respiratory chain Normalization of the cell membrane potential   Intravenous laser blood cleansing is an effective and useful procedure for the entire body. People sit down on a diet to cleanse the body of toxins and excess kilograms, and this happens here. Blood supplies nutrients to all cells and organs, oxygenation of tissues and cells depends on it. The radiators of the intravenous laser head are designed to carry out this cleaning as efficiently as possible. The procedure of blood irradiation is used in the following fields of medicine: urology and gynecology, endocrinology, gastroenterology and dermatology, pulmonology and cardiology. The intravenous LASER radiators allow to anesthetize and overcome inflammation, normalize the hormonal background and stimulate the work of the ovaries, mammary glands, adrenals and thyroid gland. In addition, the restoration of damaged tissues passes much faster, including soldering effectively. Useful properties of radiators The main feature of blood purification is the strengthening of the protection of the whole organism. That is, it not only cleanses itself of alcoholic, narcotic and exhausted substances, but also becomes healthier. In addition to blood, other biological fluids pass through the bloodstream: lymph and bile. During the session, there is a restructuring of cell membranes and resorption of loose blood clots, pathogenic microorganisms are destroyed. Blood irradiation is used not only for acute and chronic poisonings, but for various respiratory diseases, helping to breathe again full chest. Indications for vlok: - Inflammatory and infectious diseases; - Skin diseases (atopic dermatitis, herpes simplex and recurrent, dermatophytosis of the feet, psoriasis, erysipelas, ---- Lyel syndrome, eczema, etc.) - Acne and post-acne; - Viral disease; - Posttraumatic stress disorder; - Chronic infection; - Sclerosis; - Skin angiitis( vasculitis); - Violation of tissue epithelialization processes; - Preoperative tissue treatment for the prevention of complications, suppuration, inflammation and postoperative period; - Stimulation of reparative processes of organs and tissues in order to accelerate their morphofunctional recovery; - Pain syndrome; - Violation of immune status; - Violation of microcirculation; - Skin disease; - Sexual abuse; - Vascular disorders; - Alcohol withdrawal syndrome and alcoholism; - Smoking; - Infertility; - Overweight; - Rejuvenation and restoration of the body; - Hemodialysis and kidney transplantation: - Atherosclerosis; - Hypertensive disease; - Vegetative-vascular dystonia; - Bronchial asthma; - Viral hepatitis B; - Ischemic brain damage; - Diabetes; - Chronic infectious prostatitis; - Postoperative period; - Oncological diseases; - Ophthalmological diseases, vision correction; - Nervous disorder; - Increased fatigue, physical and mental stress. Package contents:  Base unit is a Matrix - 1pc. Laser radiating head 635nm-2mw - 1 pc.   You can order laser heads of different wavelengths. Sold separately!!! Laser emitting head KL-ILBI-365-2 (for UVBI)     wavelength 365–nm power mw              2  Laser emitting head KL-ILBI-405-2 405 nm  2  Laser emitting head KL-ILBI-450-2 (KL-ILBI-445-2) 445–450 nm  2  Laser emitting head KL-ILBI-450-20 (KL-ILBI-445-20) 445–450 nm    20 Laser emitting head KL-ILBI-530-2 (KL-ILBI-525-2) 520–530 nm    2  Laser emitting head KL-ILBI-530-20 (KL-ILBI-525-20) 520–530 nm    20  Laser emitting head KL-ILBI-635-2 635 nm     2  Laser emitting head KL-ILBI-635-20 635 nm     20 Laser emitting head KL-ILBI-808-40 808 nm     40   The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me. ALL international buyers are Welcome!   The  shipping is flat for all world:   FREE SHIPPING  WORLDWIDE  WE WILL COMBINE MULTIPLE WINS TO SAVE ON  SHIPPING Guarantee of qualitative packing 30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective.  We will refund you the price you paid for it or replace it with identical one.  We accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.   Thanks and good luck!

IVL2-7/5 IVL VFD DIGIT CLOCK DISPLAY TUBE GREEN NIXIE Tube New Lot of 15   Payment Details:     We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal. D e s c r i p t i o n   IVL2-7/5 VFD DIGIT DISPLAY TUBE    This never been used, from the old stock.   Use it to make your own clock, timer, counter or whatever requires digit indicators   USSR 1980S   Indicator displays 4 digit sign.   Size: 60.5mm x 26.5mm. Size sign: 5.8mm x 10mm. Color - Green   Nixies is made in USSR. New, old stock. Rare, not produce now   Electrical parameters Brightness >=100cd/m^2 Angle of visibility >= 90 deg rated (nominal) voltage of filament V 2.0-2.65 V pulse (max) voltage anodes-segments V 24 V  rated current of grid one sign mA 3-7 filament consumption of current (nominal) mA 60                  Check out our other items! Thanks and good luck! Shipping Details:   Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome!   The payment for shipment is flat for all world: FREE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON   Guarantee of qualitative packing   30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective, I will refund you the price you paid for it or replace it with identical one. Seller-online accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.  

Methods combined and laser therapy in dentistry Moskvin SV Amirkhanyan AN 208 pages  BOOK IN ENGLISH!  Description Physical therapy, including laser therapy, has long been successfully used in  many areas of modern medicine. It is no exception and dentistry,  where new enabling technologies are becoming more common. The paper reviews the literature on the subject, deals with general  ethodological approaches presented particular methods of treatment.  The emphasis is on the principles of combining laser therapy  and combination with other treatments (EHF-therapy, vacuum massage,  surgical and pharmacological methods, etc.). As logistics units chosen "Matrix" and "LAZMIK" series, as it is the  only professional devices, allowing to provide the most effective  exposure parameters for the implementation of almost all  submitted laser therapy techniques. The book is designed for dentists, physical therapists,  specialists in the field of laser medicine, students specialized courses of laser therapy,  post-graduate students. Warranty period of operation of optical fibers - 24 months from the date of sterilization. The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me. ALL international buyers are Welcome!   The  shipping is flat for all world:   FREE SHIPPING  WORLDWIDE  WE WILL COMBINE MULTIPLE WINS TO SAVE ON  SHIPPING Guarantee of qualitative packing 30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective.  We will refund you the price you paid for it or replace it with identical one.  We accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.   Thanks and good luck!

5C8S (5 Ц 8 С )Svetlana factory is double-anode full rectifier tube FOR  6S33S VINTAGE  THYRATRON Tube  MILITARY  Lot of 1 FREE SHIPPING   Payment Details:     We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal. D e s c r i p t i o n Svetlana factory 5C8S is double-anode full rectifier tube The tubes are never used. Name  5C8S Type double-anode rectifier Application  alternative current rectification Cathode type oxide,indirect heating Envelope glass Mass,g             110 Filament voltage,V         5 Filament current,A         4,25-5,75 Anode voltage,V               75 Anode current,A           0,3 Anode power,W       30 Socket type       rsh6 Max.reverse anode voltage,kV       1,7 Actual photo   This never been used, from the old stock.     Check out our other items! Thanks and good luck! Shipping Details:   Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome!  The payment for shipment is flat for all world: FREE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON  Guarantee of qualitative packing   30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective, I will refund you the price you paid for it or replace it with identical one. Seller-online accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.    

Though the A-201 looks similar to a dekatron, this strange device is actually a polyatron tube, also known as an inverse dekatron.  The A-201 operates in reverse of a normal dekatron; the tube has a ring of ten anodes surrounding a central cathode and an encircling screen electrode.  The polarity of all supply voltages and incoming pulses are reversed, and removal of the tube's cathode from active participation in the counting process prevents the cathode poisoning that can foul normal dekatrons. The encircling screen electrode provides an additional layer of protection against cathode poisoning, by collecting the majority of the sputter material from the cathode and preventing it from fouling the glass of the envelope.  The A-201 is not designed for direct view of count position, as the glow transfer occurs in a slot approximately halfway down the length of the tube. Much like a magnetic beam switching tube, the A-201 can be directly coupled to a Nixie display for indication of count position.

          Payment Details:    We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal.     Shipping Details: Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome! The payment for shipment is flat for all world: FREE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON Guarantee of qualitative packing        K561LA7 clone of  CD4011A LOT OF 10 Made in USSR K561LA7 is Soviet clone of CD4011 , CD4011A  (14  pins ) NEW         Military  equipment from old stock .   Check out our other items! Thanks and good luck!   

4 x IN-12B + 4 x SOCETS + 4 x Drivers K155ID1 NEW NIXIE TUBES NIXIE CLOCK F/SH NEW NIXIE TUBES  BRAND NEW! CHEAP! BEST FREE SHIPPING   Payment Details:     We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal. IN-12A D e s c r i p t i o n Nixies is made in USSR. New, old stock. Rare, not produce now IN-12 is The cold cathode of these devices has the form of Arabic numbers from 0 to 9  This listing is for  4 x IN-12A + 4 x SOCETS + 4 x Drivers K155ID1 Tube size: 19mm x 55mm (0.76” x 2.2”) Symbol height: 18mm (0.72”) Supply voltage: 170V Working current: 2.5mA Electrical parameters Brightness >=100cd/m^2 Angle of visibility >= 90 deg Power supply voltage >= 200 V Discharge appearance voltage Discharge voltage: Display current Operations current: Running from DC 4 - 7 mA Running from AC with 50 Hz (average value) 2 - 4 mA Life time >= 5000 hours      The clock on the discharge indicator IN- 12 Previously, these indicators are widely used for displaying digital information in measuring instruments , etc. , but now the urgency of this decision is questionable, however , studied an appropriate topic of our forum and ran according to the links in it , was made a willful decision to pile on the basis of the monk watches ... What, in your spare time from the basic lessons , and it was slowly realized. Some sort of structural scheme of the device shown in the picture:   I n the diagram, the red arrows show the data bus , and blue - power supply units. Hours can be powered from several independent sources, which are isolated by using Schottky diodes with a low drop- D1-D6. As an input to the first power supply is installed MOLEX connector that allows you to use a computer power supply , the second input is designed as a conventional coaxial DC / DC jack , and the third source is the AC / DC converter circuit is courtesy of my colleague (unfortunately , it does not registered on the forum) and is presented below:   he scheme is simple, but there are nuances: a diode VD1 - fast (if you use the chip IR2153D it is not required), suppressor VD4 and VD15 are necessary to protect the rectifier diodes, if they are selected without a large supply of voltage. Transformer Tp2 made three put together ferrite rings size 20h12h6 2000NN: primary winding contains 70 turns of 0.3mm, low-power secondary winding (for supply IR2153) - 2 sections of 7 turns of the same wire (two wires dangle, then the beginning of one wire is connected with the end of the other and get the average point - as usual), a powerful secondary winding - 2 Section 7 turns of three wires braid 0.5mm (6 wires shakes, then divide in half, etc. - as well as with low-power). Do not forget the interlayer insulation! Radiators for transistors for power to 15-17 watts is required, though the board provides a place for them. Resistor R1 represents three series-connected resistor to 100k each. Input filter: TP1 and capacitors C1 and C2 - is taken as is from the ATX power supply, inductor L3 is wound on the ring of the output inductor of the same power supply (simply wrapped wire MGTF in a single layer - much climbed, but can be up and ready again to take .. .) For definiteness, assume that after the diode junction voltage is 12V. For the digital supply voltage must be 5V clock, which is obtained from the 12V with a pulsed DC / DC converter, which was built based on the chip TL2575-05 from Texas Instr.:   To supply the gas-discharge indicators require a high voltage source of the order of 200V needed for ignition and maintain a stable level in the indicator . Upconverter 12 - > 200V is made on a chip MAX1771:   In the high-voltage part of the circuit elements should be used to withstand appropriate voltage. Divider formed by resistors R2, R3 and variable resistor sets the output voltage, which can be adjusted within certain limits. In my case, the output voltage is 190V, which is sufficient for the indicators. Inverter power is sufficient for simultaneous operation of all six indicators. I advise you to be careful when debugging: 200V - high voltage, and even isolation from the mains is present, and the power converter is not great, he was pounding on the paws quite well ... Structurally, these DC / DC converters to save space and for a number of other considerations presented in the form of individual vertical circuit boards and soldered to the motherboard clock: On the left - a 5-volt converter to the right - increases. The decoder is used to convert the data stream it receives from the MC, to a form suitable for display on the display. The scheme of the decoder along with the display shown in the figure: To display data on the display are loaded in four series-connected 74NS595 register. In the last register in the chain store data corresponding to the decimal point of the display, its output is directly controlled high-voltage switches Q1-Q6, which, in turn, ignite or extinguish the appropriate decimal point. Younger 4 digits of the other three registers contain the binary code that corresponds to the odd character cells display (1, 3, 5), and senior nibbles - even (2, 4, 6). This code is supplied to the inputs of the binary-decimal decoder with a high yield K155ID1 that control directly to the indicators. In the plate circuit of each indicator is set current-limiting resistor. Since the current is much smaller than the current point of any of the digits of the indicator in the chain of reservoirs "point" of transistors installed additional resistors. Thus, because the register is only updated by the team manager of MK and changes occur only on certain lines of data, we have actually a static display, although the update of the display is 20 times per second. The block itself consists of the microcontroller MC, real-time clock M41T80M6 from STMicroelectronics, USB FT232BM module for communication with a PC drive level RS-232 interface chip MAX232 for the same purpose, and control buttons. The scheme of all this happiness, as usual, is shown in Fig.   USB module to the FT232BM is a separate fee, vertically soldered into the main . Module is assembled on the template except for the missing chip EEPROM:   At the same time can only run one of the COM interfaces or USB, with preference given to USB, because switching is realized by means of the relay, energized from the connector USB: sticking with cable relay will spread and go to the controller data from the module FT232. RS232 можно почитать в этой статье, а по секрету скажу, что в конечной версии часов стоит такой преобразователь на TUSB3410, но все сказанное относительно приоритетов интерфейсов справедливо и для него..">Generally, the interface converter USB RS232 can be found in this article, and tell you a secret that in the final version of the clock is a converter on the TUSB3410, but it has been said about the priorities of interfaces is true for him .. Structurally, the building designed in hours on the computer CD-ROM and consist, as already noted, several of the boards. The whole area of the body is the main circuit board that is mounted inside the housing to regular seats, the rest of the "native" card CD-ROM. It installed a network power supply, a microcontroller with a clock, all necessary connectors and a part of the decoder chip. The rest of the decoder chip mounted on a separate board that is installed on the main board, second floor. The power modules vertically soldered to the main board. The back panel connectors are installed between the 4 buttons that serve to adjust the hours and mode selection. This is how it all vygyadelo during debugging:   It is connected only to additional charges decoder , the main board yet. Fully assembled board clock:   Thus, the constructs with little understood, now a few words about the firmware. Controller - ATMega8515. Such a choice is made only because they have me. In principle, the code is easily ported to ATMega16 (only need to remove the definition of port E, and a couple of nuances). The controller reads data from the chip through the RTC bus I2C, engaged in loading data into registers, monitors the status of the buttons and listen to UART - as a whole, all as always. Clock can display the actual time (in HH: MM: SS or HH: MM), the date in the format DD: MM: YY, start counting seconds: SS, have an alarm clock, and can also be used to display numerical information flowing through a COM or USB. Control is the buttons, as already mentioned, the rear of the enclosure. For each button you can "hang" the implementation of four functions called short or long pressing on the pressing 1, 2 or 3 seconds. Long pressing the supported one, two or three short beeps, respectively. The functions assigned to the buttons as follows: A. Pressing 1 on 1s - to set an alarm clock. The screen displays the current alarm set time, the discharge hour is flashing. Buttons 3 and 4 are used to decrease / increase the reading, the new value is confirmed by pressing a buzzer and then starts flashing digit minutes, setting the value of which is similar. If you do not perform any action after the entrance to the installation procedure, after a while the clock returns to native mode. Two. Pressing 1 for 2c - Set time and date in the following order: hour, minute, year, month, day. Setup is similar. Three. Clicking on a 3s - Service settings: Mode display the time (1 or 2 - HH: MM: SS or HH: MM), the show dates, in seconds, time display of data from your PC in seconds (unless within that time the PC is not new data arrive, the clock will return to the main mode) 4. Short press button 2 - showing the date for the time configured in the service menu, and then clock back to normal Five. Short press the 3 button - on / off mode of the second point: the screen shows only a second. 6. Pressing 3 for 1s - on / off indication. 7. Pressing 4 on 1s - on / off alarm clock (with alarm clock in the senior category displayed decimal point). All settings are stored either in volatile memory chip clock, or in non-volatile memory IC, so that when power is saved. When the alarm buzzer will sound for as long as you press any button. ">

    KVI-1 (KVI1) 8.2pF 10kV ceramic high-voltage capacitors   NIB  made in USSR. FREE SHIPPING New, old stock.  Lot of 10 NOS NEW   Payment Details:    We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal.     Shipping Details: Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome! The payment for shipment is flat for all world: FREE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON Guarantee of qualitative packing           D e s c r i p t i o n New, old stock. Rare, not produce now ceramic high-voltage capacitors KVI-1 8.2pF 10kV Military equipment from old stock. Temperature stability groups H30 Capacitancetolerance ±20% Dissipaton Factor 0,002 Insulation resistanc min 10 000 M Operatiog temperature range -60...+100°C Relative air humidity max 98% Vibration in the frequency range form 1 to 200 with vibro acceleration max 10 Guaranteed accrued work-time 25000h   NEW, Never Used, High Quality   Check out our other items! Thanks and good luck!  

    IV-6 ( ИВ-6 ) NIXIE NUMITRON VFD TUBES. NOS. DIGIT DISPLAY RARE TUBE made in USSR. FREE SHIPPING New, old stock.  Lot of 6 NOS NEW   Payment Details:    We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal.     Shipping Details: Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome! The payment for shipment is flat for all world: FREE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON Guarantee of qualitative packing               D e s c r i p t i o n Nixies is made in USSR. New, old stock. Rare, not produce now IV-6 are 7-segment VFD (Vacuum Fluorescent Display) tubes, showing digits 0...9 and a decimal point to the right. The size of digits is approximately 10 mm = 0.39 inch Base: 11-wire.     Check out our other items! Thanks and good luck!  

  IV-21 VFD NIXIE TUBE MULTISEGMENT NEW NOS  NUMITRON VFD TUBE DIGIT DISPLAY RARE TUBE made in USSR. FREE SHIPPING New, old stock.  Lot of 2 NOS NEW   Payment Details:    We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal.     Shipping Details: Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome! The payment for shipment is flat for all world: FREE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON Guarantee of qualitative packing           D e s c r i p t i o n Nixies is made in USSR. New, old stock. Rare, not produce now IV21 Nixie VFD Tube. Lot of 2 (Vacuum Fluorescent Display) Use it to make your own clock, timer, counter or whatever requires digit indicators This tube has 8 seven segment numericals with decimal point. It displays numbers from 0 to 9. The very first segment has a thick dot on top of the '-' sign. Tube size: 15 x 60 mm (0.6”x 2.4”) Digit height: 5.5 mm (0.22”) Brightness: 600 kd/ m2 Main electrical parameters: Supply Voltage 9-12V Total current consumption: (30–40) mA Rated voltage glow: 2.4 V Rated current glow: 35 mA Grid Current (for one digit): (1.7-3.5) mA Anode segment current (for one digit): 0.7 mA     Check out our other items! Thanks and good luck!  

TG1-0.1/0.3 ( ТГ1-0,1/0,3 ) VINTAGE THYRATRON Tube  MILITARY VERY RARE  Lot of 4 FREE SHIPPING   Payment Details:     We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal.   D e s c r i p t i o n     NOS! THYRATRON Tube TG1-0.1/0.3 ( ТГ1-0,1/0,3 ) The control is made by military representative Each tube is supplied by a sheet of data. Military equipment , high reliability, long life. The tubes are never used. Old stock. TESTED + + + 100% OK!!! Actual photo military equipment.     This never been used, from the old stock.     Check out our other items! Thanks and good luck! Shipping Details:   Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome!  The payment for shipment is flat for all world: FREE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON  Guarantee of qualitative packing   30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective, I will refund you the price you paid for it or replace it with identical one. Seller-online accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.    

LARGE RARE IN-15B NIXIE TUBES. Lot of 1  BRAND NEW! CHEAP! RARE!!   Payment Details:   We accept  PayPal and direct credit card payment (you will obtain free shipping) paying this way If you can not accept these methods of payment email to me please D e s c r i p t i o n Nixies is made in USSR. New, old stock. Rare, not produce now Soviet (USSR) Nixie tubes IN-15A . IN-15A  tubes display the following scientific symbols:  W, F, Hz, H, V, S, Ω, A. . . These Tubes was made by military plant in former USSR. Good quality. Principle of operation: neon gas, cold cathode. Size of the Symbols: 18 x 12 mm. Size of the Tube: 21 x 31 x 26 mm.   Working Voltage: 150V- 170V. Working Current: 2.5 mA.  These large nixie tubes look very beautifully and have warm, comforting orange/violet glow. Tubes are new (never used) taken from original factory box   Electrical parameters Brightness >=100cd/m^2 Angle of visibility >= 90 deg Power supply voltage >= 200 V Discharge appearance voltage Discharge voltage: Display current Operations current: Running from DC 4 - 7 mA Running from AC with 50 Hz (average value) 2 - 4 mA Life time >= 5000 hours            Check out our other items! Thanks and good luck! Shipping Details:   Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome!  The payment for shipment is flat for all world: FREE SHIPPING   SAVE MORE THAN $1300 ON SHIPPING  Guarantee of qualitative packing   30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective, I will refund you the price you paid for it or replace it with identical one. Seller-online accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.    

   Hardened wood splitter! THE LOG  SPLITTER KIT FOR ELECTRIC MOTOR   Payment Details:     We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal. This product is one of our wood splitter screws, which we make during a four  years. We use a good 45c steel and make a right thickness of tip. Standard offer is lefthand thread. We can make a right thread, but it cost +10$.   Kit includes: - Cone for splitting wood - Two Bearings - Shaft - 100mm small pulley - Large 200mm Pulley - Two grooves - Two screws Diameter 80 [mm] Overall length 250 [mm] Working length 180 [mm] Pulleys   - Large 200mm 2x17HB or any yours dimentions               -  Small 100mm 2x17HB or any yours dimentions Steel grade Improved heat-C45   can be performed any under the  contract. Mounting Type - Counterpressure screw (2 pieces) After purchase, please let us know the hole diameter in  millimeters, and depth in millimeters. We make a screws with different diametres and length. Be free to ask.          Check out our other items! Thanks and good luck! Shipping Details:   Items comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome!  The payment for shipment is flat for all world: WE WILL COMBINE MULTIPLE WINS TO SAVE ON  Guarantee of qualitative packing   30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective, I will refund you the price you paid for it or replace it with identical one. Seller-online accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.  

Новая страница 2 1 x UNICUE ULTRA RARE TUBE VFD USSR   Payment Details:    We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal.     D e s c r i p t i o n Nixies is made in USSR. New, old stock. Rare, not produce now VFD Digit Display tube. This never been used, from the old stock. Indicator displays.   Color green.            Electrical parameters Parameter     rated (nominal) voltage of filament, U 4.5-5,5 pulse (max) voltage anodes-segments, U 36 rated current of grid one sign, mA 10-16 filament, consumption of current (nominal), mA 90-110 Constancy summary current anodes-segments one sign, mA 6-10                  Thanks and good luck! Shipping Details:   Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome!   The payment for shipment is flat for all world: FREE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON   Guarantee of qualitative packing   30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective, I will refund you the price you paid for it or replace it with identical one. Seller-online accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.  

BTL-4110 Laser Professional BTL-4110 LASER PROFESSIONAL   1-CHANNEL LASER   Cost effective solution   Easy manipulation   Single-channel portable therapeutic laser with graphical and  digital display. Laser   therapy - this effect on the body by means of weak laser light. The laser  heats the soft tissue and  vascular - nerve centers, promoting their recovery.  Due to this, normal blood circulation of tissues quickly  remove toxins and waste  products. The laser light has an antibacterial and antiviral effect. The 1-channel Laser * therapeutic encyclopedia has predetermined protocols, owing to decades of  medical research. Large  regions are diagnosed by BTL laser clusters (till  1800mW) of high power. * A  broad range of alternatives is offered for BTL laser probes (400 mW), for  catering to deep and  superficial layers of tissues. A laser cluster and a probe,  along with a red and infrared probe, which are  connected on a simultaneous basis,  call for two outputs. * The  device finds its application in spheres of sports medicine, ENT, gynecology,  dermatology, rehabilitation and such like. * 1-channel  portable LLLT laser, backed by numeric and graphic displays, is embedded in the  device.  Major parameters and the timer have a display of high illumination.  General practice, pediatrics, ENT,  dermatology, gynecology, dentistry, sports  medicine, orthopedics and rehabilitation are various medical  disciplines for  which the device possesses user-defined norms. Characterized by portability, the  device  has a rechargeable battery in-built into it. Check of accessories  maintenance and detection of accessories  are undertaken by the device. Connected  clusters and probes are subject to detection and experiment. It  offers vast  alternatives of probes.   MAIN FEATURES: - Single-channel portable therapeutic laser with  graphical and digital display - Additional fluorescent display for timer and  other main parameters - Protocols for different medical fields (rehabilitation,  orthopedics, sports medicine, dentistry, gynecology, dermatology, ENT,  paediatrics, general practice) - User-defined reports - Therapeutic encyclopaedia - Portability - Built-in battery - Identification of accessories and accessories  maintenance check - Test and identification of connected probes &  clusters - Wide choice of probes: red probes of laser  wavelength 685nm and output power 30-50mW, infrared laser probes of 830nm  wavelength and output power 50-400mW - Wide range of laser clusters (red, infrared,  combined) up to 1800mW output power - Holder laser clusters and probes for easy and  convenient use - Choice of optical attachments for ENT, urology,  dentistry and gynecology - Connecting to a computer (for the  modernization program) - Multi-language menu - Trolley BTL - optional  

Laser complex UzorMed-B-2K-Optim physio-infrared unit 10W and 30W adiator  matrix Laser complex UzorMed-B-2K-FiziOptim-infrokrasny blok10 W and radiator matrix 30W The complex laser therapeutic UzorMed-B-2K Physio Optim can  be used in various fields of experimental and practical medicine in hospitals,  clinics, hospitals, research institutions, health care facilities, rural hospitals,  health units and other health care facilities in the private and public  health practice and at home by a doctor's recommendation. Dimensions for transport: dimensions in multiples of 0,45 × 0,26 × 0,16; Weight: 3.35 kg; Volume: 0.01 m3. Indications for use: For the treatment of diseases of the musculoskeletal system,  cardiovascular and urogenital systems, bronchopulmonary and ENT diseases,  diseases of the digestive and endocrine systems, infections  and many other diseases with cutaneous laser method. The complex includes a minimum structure for effective laser treatments,  with which you can conduct all sessions of laser therapy,  except for intracavitary and intravenous effects. Features: digital control radiation units (3-wire technology); the ability to measure the reflection coefficient; the possibility of introducing polyfrequency regime; the last session of the parameter memory; timer with a short beep (cut-off) every 30 seconds. during a treatment session. Included: control unit "UzorMed-B-2K"; BI1 / 10 block radiation; BIM block radiation; nozzle cosmetology CH; goggles protivolazernye. Specifications: the number of channels for radiation blocks - 2; mode laser - pulsed, continuous, modulated; The pulse repetition frequency - 5, 80, 150, 300, 600, 1500, 3000 Hz; the duration of the laser pulses - 70 - 160 ns; wavelength - BI BIM - 0,81-0,91 mm; NIR, NIR VLOK - 0,62-0,68 mm; Power consumption - 20 W; supply voltage - 220/50 V / Hz; Warranty period - 2 years; the overall dimensions of the control unit (without attachments) - 240 × 220 × 90 mm; weight - 3 kg; dimensions of the complex (package) - 450 × 260 × 160 mm; weight (with packaging) - 3.35 kg. The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me. ALL international buyers are Welcome!   The  shipping is flat for all world:   FREE SHIPPING  WORLDWIDE    WE WILL COMBINE MULTIPLE WINS TO SAVE ON  SHIPPING Guarantee of qualitative packing 30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective.  We will refund you the price you paid for it or replace it with identical one.  We accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.   Thanks and good luck!  

Matrix-VLOK "Matrix-VLOK" - the device for intravenous laser irradiation of blood Set "Matrix-VLOK" - is the latest development of the domestic certified Research "Matrix" center in the field of laser therapy.  The very title of the unit laid his appointment - intravenous laser irradiation of blood,  based on photobiological effects on all its elements. In order to understand what is the usefulness of VLOK procedures must first ask the question:  why different types of blood tests are so important in laboratory diagnosis? The fact that any process occurring in the body, one way or another, affect the blood condition.  After all, our blood - a "railroad" the entire body, providing vital functions of each organ.  And if possible reverse process: whether it is possible to influence through the correction  of the composition of human blood on his health and well-being.  Today, the answer is simple - yes! Modern innovative medicine available one of the most effective and easiest ways to hemocorrection - intravenous laser therapy. blood cells What is VLOK? VLOK (intravenous laser irradiation of blood) - is one of the most effective types of modern physiotherapy,  without which today physicians hardly imagine an extensive list of treatments of diseases.  Until recently, this technique is considered experimental,  but the high therapeutic effectiveness VLOK very quickly been recognized by the medical community.  All, without exception, "Matrix" devices have been certified. Thanks to its highly exposed to intravascular laser irradiation of blood on a human life-support system  and internal organs are activated in their work, resulting in a correction of violations that exist in the body.  Used radiation of various wavelengths - from ultraviolet (UV) to infrared (IR).  For this purpose, the apparatus is provided alternately connect emitters with different wavelengths.  This feature significantly improves the efficiency of VLOK procedures, expanding capabilities of the device. How does the unit "Matrix-VLOK"? The superficial cubital vein give birth to a disposable optical fiber and left there for some time.  The clinical effect occurs by the end of the treatment course, consisting of 5 - 10 sessions,  lasting up to 20 - 30 minutes and remains stable for several months.  If necessary, a second course of treatment after 2 - 3 months at considerable severity of the disease.  Already after the first treatment in most cases considerably even a small improvement. The device has an automatic timer and digital display duration of the procedure.  It provides for continuous adjustment and digital control of the radiation power.  During the VLOK procedures are used sterile disposable fibers KIVL-01 with a needle, which are connected to a special terminal emitter. The safety and comfort of laser therapy have an effective impact on the health and human health - soft and delicate.  The therapeutic effect can last from four to six months. The effect VLOK on various organs and systems: Anti-inflammatory - quick and efficient removal of all signs of inflammation (swelling of tissues, pain, etc...),  Significantly higher than for all of the known pharmacological action of drugs. Anti-virus, anti-bacterial - due to the rapid and persistent strengthening of the immune system,  increasing the sensitivity of microorganisms to antibiotics, increase tissue resistance to the damaging effects of microorganisms. Increased sensitivity to drugs that can reduce their dosage (antibiotics, hormones, nitrates, psychotropic and so on. d.). Increased blood oxygen capacity and improved oxygenation of organs and tissues. Normalization and stimulation of regenerative and metabolic processes. Stimulation of the regeneration, improving the functional properties of erythrocytes. Anti-allergic. Of detoxification - with considerable severity of the disease. Hormone stimulating - tonic effect on the ovaries, thyroid gland, adrenal glands, mammary glands (lactation stimulation). Cardiovascular - removal of spasm and dilation of small and medium diameter.  Increased capillary network in the pathological focus. Absorption mikrotrombov.  Reduced blood viscosity. Lowering elevated blood clotting. Stimulation of exchanging and increasing the level of oxygen in the tissues.  Lowering blood cholesterol. Antienzyme - decreased secretion of the gastrointestinal tract, the pancreas. Pulmonary - improved respiratory function. Bronchodilator effect. The versatility and effectiveness of this treatment contribute VLOK use both alone and in combination with other treatments. Why is it necessary to use invasive (intravenous) method, rather than external radiation, which is easier and cheaper? When passing through the skin are lost important properties of laser radiation. If used fiber length less than 20 cm, the laser beam passes substantially without disrupting their spatio-temporal organization. laser interaction with biological tissues is multifactorial.  These processes affect not only the absorption coefficient and scattering, multipath. All this is considered invasive (iv) exposure. For external radiation exposure method is not only loses its "medicinal" properties, but also scattered in the surrounding tissues completely unpredictable and, therefore, not possible to reliably control the exposure dose. Intravenous laser irradiation of blood Clinic "Neo Vita" is constantly expanding list of innovative therapies.  One of the latest scientific research is an intravenous laser irradiation of blood using the "Matrix" system, has a powerful healing effect on the human body. The essence of this procedure is in the intravascular laser irradiation of blood, which occurs via activation of the internal organs and body systems.  For this purpose the surface is put cubital vein disposable optical fiber through which laser beams in a certain power enter the blood within 20-30 minutes. The clinic «Neo-Vita» intravenous laser irradiation of blood is carried out as an independent and physiotherapy treatment, it comes in a set of procedures for the treatment of various diseases.  The therapy is carried out by qualified professionals who have appropriate qualifications and have been approved to carry out such procedures. In most cases, improvement is felt after the first session.  The duration of treatment and frequency of treatments is determined by a doctor for each patient individually,  usually from 5 to 10 procedures. The results of the therapeutic effect of stored up to 6 months The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me. ALL international buyers are Welcome!   The  shipping is flat for all world:   FREE SHIPPING  WORLDWIDE    WE WILL COMBINE MULTIPLE WINS TO SAVE ON  SHIPPING Guarantee of qualitative packing 30 days guarantee:   We guarantee you complete satisfaction with all my products. If you receive an item you did not order or if an item you ordered is received damaged or defective.  We will refund you the price you paid for it or replace it with identical one.  We accept returns in U.S.A. Item for returning must have the original tags and packing, otherwise it won't be accepted.   Thanks and good luck!  

VLM1-1/7 / IV-25 VFD Mat VLM1-1/7 / IV-25 VFD Matrix Tubes nixie New    Lot of 6 VFD matrix tubes IVLM1-1/7  / IV-25 These tubes have never been used, they are from the old stock.   Indicator displays 7 green segments.  All segments are separated.  Size - 7.2mm x 78mm.  Color - green.   Parameter   IVLM1-1/7 number of segments in sign 7 rated (nominal) voltage of filament, U 2.04-2,76 constant (fixed) voltage anodes-segments, U 10-20 pulse voltage anodes-segments, U up to 70 filament, consumption of current (nominal), mA 30-40 Constancy summary current anodes-segments, mA 10  

AQUATECH   Aquarium Fish Tank Surface Skimmer Filter Plant Freshwater Marine Oil 12W  1000l/h Buy it With 20% discount and FREE SHIPPING in our ebay store here look for the video of work here Features: brand new and high quality. high volume operation 1000 l/h Silent & quiet operating. Rotating head make selfcleaning ports Energy efficient 12W pump. Easy to increase air for your aquarium with water + Air increase + Oil Protein Collect & Remove(Surface Skimmer). Skims surface build to improve water quality. Great for freshwater planted aquariums. Works with both freshwater and marine. Suction cup for mounting on any kind of aquarium. Made of ABS material, durable and environmental protection. Ideal for removing microorganisms, dust, oils and food fats from the water surface. Improve water quality, oxygen exchange, and light penetration in a way. control valve can be used to adjust the amount of oxygen clean enviroment for fish

    IV-22 NIXIE VFD Tubes ( И В -22) IS MADE IN USSR. NEW, OLD STOCK. LOT OF 6  NOS NEW   Payment Details:    We accept  the following payment methods: Visa/MasterCards/EuroCards via PayPal.     Shipping Details: Tubes comes well packed (box package). The items will be shipped on second - third day after payment by registered priority airmail. Delivery typically takes 10 to 14 days (about a week for Europe). If you want to use other methods of shipment email to me.The buyer will be provided with the circuit of connection of tubes. ALL international buyers are Welcome! The payment for shipment is flat for all world: COMBINE SHIPPING WE WILL COMBINE MULTIPLE WINS TO SAVE ON Guarantee of qualitative packing       D e s c r i p t i o n The vacuum fluorescent display. It is intended to display the information in the form of digits (0... 9) and decimal (point) in the indicator device equipment special individual and group use. The glow green. The durability of at least 5000 hours Weight no more than 20 grams   IV-22 indicator displays any digits. Size 32mm x 22mm. Color green.    ELECTRICAL PARAMETERS IV-22 number of segments in sign 8 rated (nominal) voltage of filament, U 1-1,32 constant (fixed) voltage of grid, U 22-30 pulse voltage of grid, U 50-70 filament, consumption of current (nominal), mA 100 constant (fixed) current of grid, mA       12 pulse current of grid, mA 45 Constancy summary current anodes-segments, mA 6     Check out our other items! Thanks and good luck!  

Apparatus for treatment of prost Apparatus   for treatment of prostatitis Prostam Apparatus for treatment of  prostatitis Prostam - designed to treat inflammatory  diseases of the prostate gland under stihaniya inflammation and in remission.  The treatment device can simply be integrated with the use of anti-bacterial,  anti-inflammatory drugs, immunomodulators, adaptogens or as monotherapy. The device of prostatitis Prostam   constructively consists of power supply and the working body, the cable  connection. The device is Prostam treatment of prostatitis   provides light signal included in the network by means of an indicator on the  body of the power supply: - Green light - operating mode; - Red light - the device is defective; - Yellow signal - exiting. When you turn the device into the network is simple testing (red signal  indicator), after which the indicator on the housing power supply must be  lighted in green. After work (30 min), the LED is yellow. In case of failure (breakage, short circuit), the indicator lights in red. Indications for use of the apparatus Prostam treatment  of prostatitis: chronic prostatitis; prostatovezikulit; uretroprostatit; erectile dysfunction; benign prostatic hyperplasia (adenoma) on the background of chronic prostatitis. Treatment is carried out comprehensively with the use of medications prescribed  by your doctor. Contraindications to the use of a device for treatment  of prostatitis is Prostam: acute prostatitis; chronic prostatitis in the acute phase; malignant neoplasm of the prostate; active tuberculosis or suspected tuberculosis, prostate; acute inflammatory diseases of the rectum; malignant neoplasm of rectum Designed for the treatment of patients with chronic prostatitis unit from  prostatitis simply allows to implement a combination of local effects on the  prostate transrectal access the most popular methods used to improve the  effectiveness of medical treatment - hyperthermia, pulsed electromagnetic fields,  mechanical microvibration. Thermal effects effectively influence the microcirculation (improvement of blood  circulation), and stimulation of immunity in the surrounding tissues. Local magnetic field exposure has anti-inflammatory, decongestants, painkillers  and trofikoregenerativnym action. Mechanical micro vibration stimulates the contractile ability of muscle elements  of the prostate, pelvic floor muscles and leads to the restoration of their tone  and contributes to an adequate evacuation of the secret, it is important to  address the stagnation in the prostate and reduce symptoms of irritation of the  lower urinary tract. Therapeutic effect of local physical impacts apparatus for treatment of  prostatitis Prostam, is associated with: improvement of tissue microcirculation in the prostate gland and surrounding  tissue; analgesic effect of vibration factor and a pulsed magnetic field; decrease in spastic and edematous components that accompany the inflammatory  process. These effects are realized by complex simultaneous action of hyperthermia,  vibration and pulse magnetic field on the prostate tissue and neural structures  that are part of the pelvic nerve plexus, namely, the prostatic plexus. Impact  on the listed structures involved in the formation of disease symptoms in the  lower urinary tract, prostate, reduces inflammation and helps restore the  functions of the male reproductive system. Local physical therapy effects on the prostate gland, the device Prostam and its  surrounding tissue amplify the effects of antibacterial and anti-inflammatory  treatment for chronic prostatitis, including against the background of benign  prostatic hyperplasia. The consequence of such exposure is to improve the  microcirculation in prostate tissue, decrease swelling, increase in the  concentration of antibiotics for their combined use. Procedures performed 1 time per day. Duration - 20-30 minutes. The course of  treatment 9.7 procedures. Repeated courses are held not earlier than 2 months. Specifications: Voltage, V 220 Establishing the operating mode, no more, with 30 The amplitude of vibration of the working body at a frequency of 20Hz, up to 0,1  mm The duration of the cycle shifts the frequency from 16 The frequency of vibration of the working body, Hz. 18-90 Duration of working cycle of procedure, min 30 ± 10% Operating temperature of the working body, 30-43 ° C MTBF, at least, 3,000 hours   Integration: 1. PROSTAN device. 2.Original factory case. 3.English operating manual. Production: Ukraine   WHOLESALE buyers are Welcome! We have wholesale quantity of this items for you Thanks  and good luck!