Only Fabric. These larger sized canopy are wonderful for using on playstands as a canopy or for open ended imaginative play. Great for making tents and forts. Play-stands invites children into imaginary play, which provides many important benefits for both intellectual and social development. It is a great gift for your child, is Eco-friendly, Unique, hand Crafted, safe for children. ***DIMENSIONS*** Height 270cm/108in , length 300cm/120in, ***SAFETY*** Made of Chiffon fabric. ***PACKING/ GIFT NOTES*** We don't offer special gift wrapping, although we can add a short gift note to the packing. Please include the inscription in the "note to seller" box when you check out. ***CARE INSTRUCTIONS*** If silks become soiled, please hand wash separately in cool or lukewarm water and hang/dry flat for best results. Or you may machine wash on the gentle cycle in cool water and with a mild detergent.

Clothes for a doll handmade. Fashionable tracksuit in black and coral colors. Stylish breeches and a T-shirt are perfect for the doll's size. The clothes are made of high quality fabric and fastened with buttons on the back. The set consists of breeches and a T-shirt.

Suit for a teenage doll. A white asymmetrical skirt and a short jacket with 3/4 sleeves will be a good outfit for your favorite doll. The jacket and skirt are decorated with beads, which makes the suit unique. The clothes are hand-sewn from soft jersey. The outfit is fastened with buttons. The set consists of a skirt and a jacket.

Clothes for the rainbow doll. The outfit is hand-sewn from bright quality fabric. Stylish outfit that will decorate your favorite doll and create a unique look. Clothes will be a great gift for a collector of dolls, because they are handmade and original, and their number is very limited. This set consists of shorts and a short top. The top is decorated with a thermal sticker. Clothes are fastened with buttons and are easy to put on and take off. Care recommendation: hand wash at a temperature not exceeding 30 degrees C. If you have any questions or difficulties with the order, write to me, I will be glad to answer your questions.

A set of clothes for a rainbow doll. Leggings and a sweatshirt will be the perfect addition to your favorite doll. This stylish, handmade outfit will delight doll collectors as well. The sweatshirt is decorated with a thermal sticker on the front. The clothes are hand-sewn and with love. Fastens at the back with buttons. The set consists of leggings and a sweatshirt. Recommended hand wash at a temperature not exceeding 30 degrees C.

Attention buyers from the USA! Delivery times from Ukraine to the USA are only 10-12 business days! I accept orders 24/7 New adapter DKL mount to Canon EF with programmable Dandelion chip original  4 generation. The chip has the functions: 1. Programming (the focal length and aperture are programmed into the chip). 2. The focus trap function (as long as there is no exact hit in the focus - the camera shutter will not work - this is the "autofocus in manual mode") 3. The adjusting confirmation point   function (if your lens has a back / front focus - the focus confirmation point can be shifted by +/- 17 steps 4. Stand-by function !!! (None of the Chinese EMF chip has this function). Without this function, the chip discharges the battery, even if the camera is turned off. What is in the box? 1. DKL mount-Canon EF adapter with programmable dandelion chip original 2. Canon EF rear cap BEST SERVICE BEFORE AND AFTER PURCHASE! This adapter is equipped with the focusing chip that works on all Canon cameras, including the newest models, including: Canon 5D mark IV, Canon 5D mark III, 5Ds, 5DsR, 1Dx, 1Dx mark II,  6D,   650D, 700D, 750D, 70D, 80D, 100D. I make the free programming of each chip . ( in the chip programmed focal length and aperture). I make a personal video clip to each buyer of the   adapter with chip, in this video clip I show completely programmed chip! all video recorded for buyers to look at my  YouTube channel:  Andrey Kuryanov This chip works on all of Canon SLR cameras, both of film and all digital Canon SLR models,  including  Canon 6D mark II, Canon 6D mark IV, Canon 5D mark III, 5Ds, 5DsR, 1Dx, 1Dx mark II, 650D, 700D, 750D, 70D, 80D, 100D,  and so on - everything! In the chip-dandelion, you can pre-program only one single value of the focal length and a single value of the aperture! During the shooting, these values in the dandelion chip do not change! These values can only be changed in the programming mode of the dandelion chip! The name of the lens is impossible to pre-program in a dandelion chip! Before buying an adapter with a dandelion chip, write to me the name of model your Canon camera and: 1. The name of the lens, for example:  50 mm f/ 2.0 2. The focal length,   for example: 50 mm 3. The aperture ratio (the value of the most open aperture),   for example: f  2.0 All customers receive detailed instructions on programming the chip. Прежде, чем Вы сделаете заказ и оплатите его, напишите мне в личном сообщении: 1. Название Вашего объектива, например Olympus OM 50/1,4 2. Фокусное расстояние, которое нужно запрограммировать, например: 50 мм 3. Светосилу объектива (значение максимально открытой диафрагмы), например 1,4 Все покупатели получают подробную инструкцию по программированию чипа в письменном виде. Так-же я предоставляю видео-инструкцию по программированию. FAQ Canon Dandelion Chip: How does the metering What aperture will be displayed on the camera The camera shows that the diaphragm, which is programmed in the dandelion. This diaphragm is fixed and does not change during the shooting !!! Exposure is calculated according to the actual luminous flux after you close the lens aperture to the desired value at the time of shooting. It does not matter what aperture programmed dandelion. Extract all the same to count correctly. ETTL works similarly. Just put the flash and shoot. Flash energy is calculated automatically. Are firmware affect the accuracy and regimes? Does not affect. The dandelion can be sewn F1.0 / 12mm and use, for example, with Samyang 500 mm .. However, modern ETTL flash will try to uncover the reflector in accordance with the sewn in dandelion focal length. In this case, you need to convert flash to manually enter the zoom mode. video version ( in russian) Basics of working with a dandelion chip for Canon cameras : The camera must be in Av mode, set the One Shot mode in the camera menu so that the shutter will fire when the sharpness appears. Each lens has its correct focus direction. Set the subject in 3-5 meters from yourself. Then open completely the diaphragm on the lens and in the dandelion, also set the maximum open value. Turn the sharpness from: 1. clockwise 2. counterclockwise by fully pressing the shutter release button and focusing on the center point. As soon as the lens becomes sharp - the shutter will work. Do all the same, only sharpness twist from infinity to zero. Compare 2 pictures, in one direction the picture will be either completely in sharpness or much sharper than the second, here in this direction always focus with this lens and, based on this direction, do the alignment of the confirmation point. PROGRAMMABLE CHIP SPECIFICATIONS A new series of Dandelions for digital and film cameras Canon EOS. Since the autumn of 2008 an updated Dandelion is being produced. The case is made of specially hard plastic, for better slip. And the contact areas are covered with a solid layer of gold. The new series received an important function - the programming function. Those. you can independently change the "stitched" in the Dandelion value of the aperture and focal length. And also the most important adjustment function, which allows you to cope with the problems of accuracy of confirmation of focus. The new Dandelion does not use the MF mode, as it was before. Now the focus logic works in AF (autofocus) mode. First, it increases the accuracy of focusing. Secondly, it allows you to adjust the Dandelion to different instances of lenses. Third - the audio confirmation now works on all cameras. For example, on a film EOS 3000N. The sensitivity of the focus sensors in this mode is an order of magnitude higher. There was also one more feature - "hard" locking of the descent to the confirmation signal. If you hold the shutter button all the way down, the picture will be taken instantly at the exact focus signal. This allows you to shoot dynamic stories. And of course the main advantage of the new series is the ability to change the parameters of the Dandelion independently, without removing it from the camera. Parameters of Dandelion

Attention buyers from the USA! Delivery times from Ukraine to the USA are only 10-12 business days! I accept orders 24/7 New adapter Minolta MD to Canon EF with programmable Dandelion chip original  4 generation. I recommend using this adapter for lenses with an aperture of f/2.0 or darker.  On lenses with an aperture lighter than f/2.0 (f/1.2; f/1.4; f/1.8 - slight blurring of the resulting image is possible.  Reason: the diameter of the rear glass of such lenses is larger than the diameter of the glass in this adapter. The chip has the functions: 1. Programming (the focal length and aperture are programmed into the chip). 2. The focus trap function (as long as there is no exact hit in the focus - the camera shutter will not work - this is the "autofocus in manual mode") 3. The adjusting confirmation point   function (if your lens has a back / front focus - the focus confirmation point can be shifted by +/- 17 steps 4. Stand-by function !!! (None of the Chinese EMF chip has this function). Without this function, the chip discharges the battery, even if the camera is turned off. What is in the box? 1. Minolta MD-Canon EF adapter with programmable dandelion chip original 2. Canon EF rear cap 3. Minolta MD mount cap BEST SERVICE BEFORE AND AFTER PURCHASE! This adapter is equipped with the focusing chip that works on all Canon cameras, including the newest models, including: Canon 5D mark IV, Canon 5D mark III, 5Ds, 5DsR, 1Dx, 1Dx mark II,  6D,   650D, 700D, 750D, 70D, 80D, 100D. I make the free programming of each chip . ( in the chip programmed focal length and aperture). I make a personal video clip to each buyer of the   adapter with chip, in this video clip I show completely programmed chip! all video recorded for buyers to look at my  YouTube channel:  Andrey Kuryanov This chip works on all of Canon SLR cameras, both of film and all digital Canon SLR models,  including  Canon 6D mark II, Canon 6D mark IV, Canon 5D mark III, 5Ds, 5DsR, 1Dx, 1Dx mark II, 650D, 700D, 750D, 70D, 80D, 100D,  and so on - everything! In the chip-dandelion, you can pre-program only one single value of the focal length and a single value of the aperture! During the shooting, these values in the dandelion chip do not change! These values can only be changed in the programming mode of the dandelion chip! The name of the lens is impossible to pre-program in a dandelion chip! Before buying an adapter with a dandelion chip, write to me the name of model your Canon camera and: 1. The name of the lens, for example:  Minolta MD 50 mm f/ 2.0 2. The focal length,   for example: 50 mm 3. The aperture ratio (the value of the most open aperture),   for example: f  2.0 All customers receive detailed instructions on programming the chip. Прежде, чем Вы сделаете заказ и оплатите его, напишите мне в личном сообщении: 1. Название Вашего объектива, например Olympus OM 50/1,4 2. Фокусное расстояние, которое нужно запрограммировать, например: 50 мм 3. Светосилу объектива (значение максимально открытой диафрагмы), например 1,4 Все покупатели получают подробную инструкцию по программированию чипа в письменном виде. Так-же я предоставляю видео-инструкцию по программированию. FAQ Canon Dandelion Chip: How does the metering What aperture will be displayed on the camera The camera shows that the diaphragm, which is programmed in the dandelion. This diaphragm is fixed and does not change during the shooting !!! Exposure is calculated according to the actual luminous flux after you close the lens aperture to the desired value at the time of shooting. It does not matter what aperture programmed dandelion. Extract all the same to count correctly. ETTL works similarly. Just put the flash and shoot. Flash energy is calculated automatically. Are firmware affect the accuracy and regimes? Does not affect. The dandelion can be sewn F1.0 / 12mm and use, for example, with Samyang 500 mm .. However, modern ETTL flash will try to uncover the reflector in accordance with the sewn in dandelion focal length. In this case, you need to convert flash to manually enter the zoom mode. video version ( in russian) Basics of working with a dandelion chip for Canon cameras : The camera must be in Av mode, set the One Shot mode in the camera menu so that the shutter will fire when the sharpness appears. Each lens has its correct focus direction. Set the subject in 3-5 meters from yourself. Then open completely the diaphragm on the lens and in the dandelion, also set the maximum open value. Turn the sharpness from: 1. clockwise 2. counterclockwise by fully pressing the shutter release button and focusing on the center point. As soon as the lens becomes sharp - the shutter will work. Do all the same, only sharpness twist from infinity to zero. Compare 2 pictures, in one direction the picture will be either completely in sharpness or much sharper than the second, here in this direction always focus with this lens and, based on this direction, do the alignment of the confirmation point. PROGRAMMABLE CHIP SPECIFICATIONS A new series of Dandelions for digital and film cameras Canon EOS. Since the autumn of 2008 an updated Dandelion is being produced. The case is made of specially hard plastic, for better slip. And the contact areas are covered with a solid layer of gold. The new series received an important function - the programming function. Those. you can independently change the "stitched" in the Dandelion value of the aperture and focal length. And also the most important adjustment function, which allows you to cope with the problems of accuracy of confirmation of focus. The new Dandelion does not use the MF mode, as it was before. Now the focus logic works in AF (autofocus) mode. First, it increases the accuracy of focusing. Secondly, it allows you to adjust the Dandelion to different instances of lenses. Third - the audio confirmation now works on all cameras. For example, on a film EOS 3000N. The sensitivity of the focus sensors in this mode is an order of magnitude higher. There was also one more feature - "hard" locking of the descent to the confirmation signal. If you hold the shutter button all the way down, the picture will be taken instantly at the exact focus signal. This allows you to shoot dynamic stories. And of course the main advantage of the new series is the ability to change the parameters of the Dandelion independently, without removing it from the camera. Parameters of Dandelion

2 pcs of russian beam tetrode power tubes 6P41S, near equivalent of 7868 tube. Pins is identical with 7868 but required adjustment of the bias voltage for 6P41S. Tubes are new, "NEVZ" factory. Price for 2 pcs. Cathode type: oxide, indirect heating; Envelope: glass; Mass, g: 36; Filament voltage, V: 6,3; Filament current, A: 1,0-1,2; Anode voltage, V: 190; Anode current, A: 0,056-0,076; Anode power, W: 14; Grid2 voltage, V: 190; Steepness, mA/V: 8,4; Reverse grid current, uA: 1; Microphnic noise, mV: 500; Socket type: rsh24-1. __________________________________ PLEASE NOTE: Please be aware that different countries have different customs and/or VAT/GST fees for importing goods. We do not have this information available and we do not estimate these charges. If customs fees are due upon delivery, it is the buyer's responsibility to meet that expense. Payment: PayPal. Shipping: We normally ship within 48 hours of payment cleared excluding local holiday and weekend.  We ship items with registered air mail. Delivery typically takes 10 to 14 days (about a week for Europe). Sometimes longer. WE WILL COMBINE MULTIPLE WINS TO SAVE ON. Guarantee of qualitative packing. Warranty / Garantie:   30 days after receiving. If you receive defective or damaged tube, I will replace it with identical one. Item must be returned back in original package.

Russian ceramik high quality 8-pin sockets coated with silver for popular tubes GU-50, 6R3S-1, 5C8S, 5C9S. New old stock from bulk box. Price for 2 sockets.   

4 Stk. russischer Doppeltriode 6N7S Direkter Ersatz 6N7GT . Röhren werk "NEVZ" ( Novosibirsk ) 3-1991. Neue unbenutzte. Getestet von tubetester L3-3 gut. ______________________________________   BITTE BEACHTEN SIE: Bitte beachten Sie, dass andere Länder andere Sitten und / oder VAT / GST Gebühren für die Einfuhr von Waren haben. Wir verfügen nicht über diese Informationen zur Verfügung und wir nicht schätzen diese Gebühren. Wenn Zollgebühren bei Lieferung fällig sind, ist es der Verantwortung des Käufers, diese Kosten gerecht zu werden. PLEASE NOTE: Please be aware that different countries have different customs and/or VAT/GST fees for importing goods. We do not have this information available and we do not estimate these charges. If customs fees are due upon delivery, it is the buyer's responsibility to meet that expense. Payment / Zahlungsmethoden: : Bankueberweisung auf ein deutsches Konto (das ist die Vorzugsmethode fuer Kaeufer aus Deutschland und EU-Laendern). PayPal. Bank transfer to our Germany account (this is the preferred method for buyers from Germany and EU countries ). PayPal. Shipping / Versandbedingungen: Wir versenden in der Regel innerhalb von 48 Stunden nach Ihrer Bezahlung, exklusive Wochenenden und Feiertage. Wir verschicken nur per Einschreiben. Normalerweise dauert die Zustellung zwischen 10 und 14 Tagen. Nur selten etwas länger. Wir informieren Sie per Mail, wenn die Sendung an Sie rausgeht. Wir kombinieren Versandkosten, damit Sie Porto sparen koennen. Wir garantieren auch eine qualitativ seht gute Verpackung. We normally ship within 48 hours of payment cleared excluding local holiday and weekend.  We ship items with registered air mail. Delivery typically takes 10 to 14 days (about a week for Europe). Sometimes longer. Buyer will be informed by email when item has been shipped out. WE WILL COMBINE MULTIPLE WINS TO SAVE ON. Guarantee of qualitative packing. Warranty / Garantie:   30 Tage nach Erhalt. Wenn you tube erhalten defekt oder beschädigt ist, werde ich ersetzen sie mit identisch. Posten müssen zurückgegeben werden Paket original wieder. 30 days after receiving. If you receive defective or damaged tube, I will replace it with identical one. Item must be returned back in original package.

The parameters are measured at Ua = Ug2 = 250V, Ug1 = -12,5V Matched 8 pcs of russian 6P1P-EV tubes. 6P1P-EV is similar to the 6AQ5, EL90 and 6V6 tubes, but with a different pinout. Direct replacement for 6P1 in Chinese tube amplifiers. New from a bulk pack.

Matched pair of original russian high grade military tubes 6J1P-EV. Popular tubes for Little dot amp, replacement for EF95, 6AK7, 6J1. These tubes gives a very clean, warm and natural sound. Grid in tubes contains gold and platinum. long life more then 5000h. The tubes were made in USSR, "Voskhod" plant, 1972. "OTK" and military rhombus stamped on body. Pull up from big factory box. Tested with precision tubetester L3-3: Uh=6,3 V, Ua=120 V; Ug2=120 V; Rb=200 Ohm  Norm: Ia= 5mA ... 9.7mA; S = 3.9mA/V ... 6.4mA/V  The accuracy of matching pairs ±5%

Matched pair (2 pcs) of Soviet military grade double triode 6N1P-VI. Tubes are selected with close parameters . Tested by Soviet precision tubetester L3-3  The parameters are measured at Uh = 6,3V, Ua = 250V, Rk = 600 Ohm The tube is suitable as a direct replacement for ECC88, E88CC, 6N1, though the higher heating current is observed.   New old stock. "NEVZ " Novosibirsk plant 1990. Price for 2 matched tubes.

Matched pair (2 pcs) of Russian tubes 6J9P-E (6Ж9П-Е) from factory "Oktyabr",  produced July-1978  Military quality HF pentode with OTK mark.  Equivalent for E180F, CV3998, 6688.  Tested with tubetester L3-3 with parameters: Uh=6,3V; Ua=150V; Ug2=150V; RL=80 Ohm.   Measured parameters on the photo (Ip/S).

Matched pair (2 pcs) of Russian tubes 6J9P-E (6Ж9П-Е) from factory "Oktyabr",  produced 1984, 1986  Military quality HF pentode with OTK mark.  Equivalent for E180F, CV3998, 6688.  Tested with tubetester L3-3 with parameters: Uh=6,3V; Ua=150V; Ug2=150V; RL=80 Ohm.   Measured parameters on the photo (Ip/S).

Matched quartet (4 pcs) of Soviet military grade double triode 6N1P-VI. These tubes was made by Novosibirsk military plant in former USSR. Date 1990.  Tubes are new, taken out from wholesale factory box.  Military equipment with OTK sign. Attention please, 6N1P tubes are similar to the 6DJ8/6922 families, but NOT a direct replacement. Tubes matched by professional russian tubetester L3-3: The parameters are measured at Uh = 6.3V, Ua = 250V , Rk = 600 Ohm. Anode current / stepness for each triode is marked on each box, look a photo please. ------------------------------------------------------------------------------------------------------------------------------- PLEASE NOTE: Please be aware that different countries have different customs and/or VAT/GST fees for importing goods. We do not have this information available and we do not estimate these charges. If customs fees are due upon delivery, it is the buyer's responsibility to meet that expense. Payment:   PayPal. Shipping: We normally ship within 48 hours of payment cleared excluding local holiday and weekend.   We ship items with registered air mail. Delivery typically takes 10 to 14 days (about a week for Europe). Sometimes longer.  Buyer will be informed by email when item has been shipped out.  WE WILL COMBINE MULTIPLE WINS TO SAVE ON.  Guarantee of qualitative packing.  Warranty: 30 days after receiving. If you receive defective or damaged tube, I will replace it with identical one. Item must be returned back in original package.

*************** I went on a trip and send all my orders on July 10th! What would be the inspiration you need to travel! I'm going on a trip!  Subscribe to my channel you tube and see where I am! I love you my dear customer!) *********************** This cute handmade pipecleaner toy can be a great toy for kids . Baby kangaroo can be put out of the pocket of mom kangaroo !!! This chenille kangaroo with a baby in your pocket is a perfect present for any occasion (Birthday, Christmas, New Year). *********************************************************************************************** Approximate measurements of a product: 13*9*4 cm. This toy is packed in a small gift box. Gift message is also available!!! ************************************************************************************************ !!!!!!!!!!!!!!!!!!!!!!!!!!!!!Owl- this decor is not included in the package !!!!!!!!!!!!!!!!!!!!!!!!!!! ********************************************************************************************** But if you are a fond of different DIY projects soon you`ll be able to make your own pipecleaner figure with our video tutorials. Mark my shop with a ❤️ not to miss our updates. For any questions you can write me on pipecleanermiracles(at)gmail.com ****************************************************************************************** WARNING: avoid storing this toy in a humid places or playing in the rain! *****************************************************************************************

*************** I went on a trip and send all my orders on July 10th! What would be the inspiration you need to travel! I'm going on a trip!  Subscribe to my channel you tube and see where I am! I love you my dear customer!) *********************** This easy to make step-by-step tutorial offers a 18 minute video of the process of creating a marvelous pipecleaner toy. You and your kids will learn the basic techniques of working with pipe cleaner wires. Using different instruments and colorful chenille wires I`ll show you how to create unique decorations and toys. Purchasing this tutorial you will get a PDF file with materials description and tools you`ll need for your future pipe cleaner figure. ThisPDF file also contains a QR code for access to video tutorial. ****************************************************************************************** This tutorial is for children 8+ or for kids under 8 with the parents assistance. If youhave any questions feel free to contact me. ****************************************************************************************** You can buy materials for this tutorial in my shop here: https://www.etsy.com/listing/627693729 ****************************************************************************************** IMPORTANT NOTE: This tutorial is owned by the Pipecleaner Miracles. You may not share or distribute it via personal or public platform any part of this tutorial. ****************************************************************************************** Continue shopping the Pipecleaner Miracles Here https://www.etsy.com/shop/PipeCleanerMiracles Mark my shop with a ❤️ not to miss our updates. Visit my accounts on FB and Instagram for updates or promotions Instagram @pipe_cleaner_miracles Facebook https://www.facebook.com/pipecleanermiracles/ For any questions you can write me on pipecleanermiracles(at)gmail.com ****************************************************************************************** WARNING: avoid storing tpipecleaner toys in a humid places or playing in the rain! *****************************************************************************************

This cute handmade pipecleaner Fairy snake cobra can be a great, a toy for kids and adults. This chenille snake cobra is a perfect present for any occasion (Birthday, Christmas, New Year). This pipecleaner snake cobra can be used as a decoration, a car, kids room etc. ************************************************************** Approximate measurements of a product: 1.3*30 cm. This Fairy snake cobra is packed in a gift box 15*15*3cm. Gift message is also available. ************************************************************* If you want to buy a snake cobra in other colors feel free to contact me for a custom order and I gladly will make a unique custom toy specially for yoy. But if you are a fond of different DIY projects soon you`ll be able to make your own pipecleaner figure with our video tutorials. Mark my shop with a ❤️ not to miss our updates. For any questions you can write me on pipecleanermiracles(at)gmail.com ************************************************************* WARNING: avoid storing this toy in a humid places or playing in the rain!

Clothes for the doll, a combination of a knitted cardigan and trousers with a T-shirt. A bright autumn outfit in warm colors will look very cute on your favorite doll. The clothes are perfect for a gift for a child or a doll collector. All clothes in the store are sewn and sewn by hand, which makes them unique and limited in quantity. The set consists of a knitted cardigan, top and trousers. The clothes are fastened with buttons.

Clothes for a doll are always a good gift for connoisseurs of the doll world and miniatures. The set of clothes is sewn for a rainbow doll and perfectly matches its parameters. The outfit is made of bright quality fabrics. All clothes in this store are hand-sewn, which allows you to pay attention to all the small details when sewing. The set consists of a jacket, top and skirt. If you have any questions, write to me, I will be glad to answer you.

Bakugan Mechtanium Surge DRAGONOID (800G) bulk packing without cards

"Zorky-3С" — is a Soviet rangefinder camera, produced by the Krasnogorsk Mechanical Plant from 1955 to 1956.A rare collectible Soviet working rangefinder camera ZORKY 3C, 1956, No. 5623686 with a leather case, a Jupiter 8 lens with a lid (has minor damage, does not affect the robotability).

Vintage Lot of 13 Assorted Military Soviet Army Shoulder Boards USSR. There are a shoulder boards of automotive division and a chevron of military post Most of these shoulder boards are new.