NIXIE TUBE IN-14 CLOCK KIT UNSOLDERED You will receive unsoldered disassembled kit. Do it yourself! ???? We came up with a unique and minimalistic design, also please note that we use the most premium body materials (unlike suspicious analogs that have appeared on the market) and the best in14 tubes (NOT z570, NOT z573, NOT in8), they are distinguished by the clearest, brightest and long-lasting glow. Therefore, our Kit will be the best gift for you or your friends???? The Kit includes a power supply. But you can use this product with any power adapter not exceeding 5V. This set is very easy to assemble and uses a minimum of parts. Thanks to the video instructions, even a person who first picks up a soldering iron can solder it. The listing contains PCB board, full set of electronics parts, wooden parts, power supply and Arduino NANO. You will receive programmed Arduino NANO: - Clock displays time in HH:MM format (24 hours); - Numbers turning modes (No effect, smooth transition through fading, number rewind, cathode rewind, "Train", "Rubber"); - Night mode from 23:00 till 7:00 (the light of the lamps is much softer); - The clock runs correctly even after a power outage; - Also you can enable / disable "glitches mode" which looks stylish and vintage. Parts list: 1. Arduino NANO - 1 pc 2. PCB board - 2 pcs 3. Mini RTC DS3231 - 1 pc 4. PBS-40 and PLS-40 - 1 pc 5. Capacitor 350 V 4,7 uF - 1 pc 6. Resistor 470 kOhm - 1 pc 7. Inductor 220 uH 240 mA - 2 pcs (1 spare pc) 8. Diode HER106 - 1 pc 9. Transistor IRF840PBF - 1 pc 10. Optocoupler TLP627(F) DIP-4 - 7 pcs (2 spare pcs) 11. Decoder K155ID1 - 2 pcs (1 spare pc) 12. Light-emitting diode - 4 blue pcs 13. Neon dot - 1 pc 14. Resistor 100 Ohm 0,25 W - 4 pcs (1 spare pc) 15. Resistor 200 kOhm 0,25 W - 2 pcs (1 spare pc) 16. Resistor 470 Ohm 0,25 W - 2 pcs (1 spare pc) 17. Resistor 10 kOhm 0,25 W - 2 pcs (1 spare pc) 18. IN-14 tubes - 4 pcs 19. Magnetic micro USB cable - 1 pc 20. Buttons - 3 pcs 21. 40 cm of 1.5 mm wire - 1 pc 22. Electrolytic capacitor 10 V 470 uF - 1 pc 23. Wooden enclosure parts - 1 pc 24. Power Supply 5V Terms of sales All returns are accepted. You should contact us within 30 Days after receiving the item. Contact us We will reply within 15 minutes. Our working hours: 8:00 - 18:00 (Eastern Standard Time) seven days a week. Please do not hesitate to contact us to resolve the issue before leaving negative feedback. Thank you! Payment We accept PayPal only. Delivery details We will ship you the item within 3 business days from the receipt of payment. We only ship item to your PayPal verified address. We check all items before sending out. All products are brand new, never been used or refurbished. Your item will be shipped from Ukraine and normally arrive in 7-8 business days to the United States (about 3-5 days worldwide).

NIXIE TUBE IN-12 CLOCK KIT This set is very easy to assemble and uses a minimum of parts. Thanks to the video instructions, even a person who first picks up a soldering iron can solder it. The listing contains PCB board, full set of electronics parts, power supply (US), IN-12 tubes and Arduino NANO. You will receive programmed Arduino NANO: - Clock displays time in HH:MM format (24 hours); - Numbers turning modes (No effect, smooth transition through fading, number rewind, cathode rewind, "Train", "Rubber"); - Night mode from 23:00 till 7:00 (the light of the lamps is much softer); - The clock runs correctly even after a power outage; - Also you can enable / disable "glitches mode" which looks stylish and vintage. Parts list: 1. Arduino NANO - 1 pc 2. PCB board - 2 pcs 3. RTC DS3231 - 1 pc 4. PBS-40 and PLS-40 - 1 pc 5. Capacitor 350 V 4,7 uF - 1 pc 6. Resistor 470 kOhm - 1 pc 7. Inductor 220 uH 240 mA - 2 pcs (1 spare pc) 8. Diode HER106 - 1 pc 9. Transistor IRF840PBF - 1 pc 10. Optocoupler TLP627(F) DIP-4 - 6 pcs (2 spare pcs) 11. Decoder K155ID1 - 2 pcs (1 spare pc) 12. Light-emitting diode - 5 pcs (4 blue pcs, 1 red pc) 13. Resistor 100 Ohm 0,25 W - 4 pcs (1 spare pc) 14. Resistor 150 Ohm 0,25 W - 2 pcs (1 spare pc) 15. Resistor 470 Ohm 0,25 W - 2 pcs (1 spare pc) 16. Resistor 10 kOhm 0,25 W - 2 pcs (1 spare pc) 17. IN-12 tubes - 4 pcs 18. Power supply (US) - 1 pc 19. Buttons - 3 pcs 20. 40 cm of 1.5 mm wire - 1 pc 21. CR2032 battery - 1 pc 22. Electrolytic capacitor 10 V 470 uF - 1 pc Terms of sales All returns are accepted. You should contact us within 30 Days after receiving the item. Contact us We will reply within 15 minutes. Our working hours: 8:00 - 18:00 (Eastern Standard Time) seven days a week. Please do not hesitate to contact us to resolve the issue before leaving negative feedback. Thank you! Payment We accept PayPal only. Delivery details We will ship you the item within 3 business days from the receipt of payment. We only ship item to your PayPal verified address. We check all items before sending out. All products are brand new, never been used or refurbished. Your item will be shipped from Ukraine and normally arrive in 7-8 business days to the United States (about 2-3 days worldwide).

NIXIE TUBE IN-14 CLOCK KIT This set is very easy to assemble and uses a minimum of parts. Thanks to the video instructions, even a person who first picks up a soldering iron can solder it. The listing contains PCB board, full set of electronics parts, power supply (US) and Arduino NANO. You will receive programmed Arduino NANO: - Clock displays time in HH:MM format (24 hours); - Numbers turning modes (No effect, smooth transition through fading, number rewind, cathode rewind, "Train", "Rubber"); - Night mode from 23:00 till 7:00 (the light of the lamps is much softer); - The clock runs correctly even after a power outage; - Also you can enable / disable "glitches mode" which looks stylish and vintage. Parts list: 1. Arduino NANO - 1 pc 2. PCB board - 2 pcs 3. Mini RTC DS3231 - 1 pc 4. PBS-40 and PLS-40 - 1 pc 5. Capacitor 350 V 4,7 uF - 1 pc 6. Resistor 470 kOhm - 1 pc 7. Inductor 220 uH 240 mA - 2 pcs (1 spare pc) 8. Diode HER106 - 1 pc 9. Transistor IRF840PBF - 1 pc 10. Optocoupler TLP627(F) DIP-4 - 7 pcs (2 spare pcs) 11. Decoder K155ID1 - 2 pcs (1 spare pc) 12. Light-emitting diode - 4 blue pcs 13. Neon dot - 1 pc 14. Resistor 100 Ohm 0,25 W - 4 pcs (1 spare pc) 15. Resistor 200 kOhm 0,25 W - 2 pcs (1 spare pc) 16. Resistor 470 Ohm 0,25 W - 2 pcs (1 spare pc) 17. Resistor 10 kOhm 0,25 W - 2 pcs (1 spare pc) 18. Power supply (US) - (1 pc) 19. Buttons - 3 pcs 20. 40 cm of 1.5 mm wire - 1 pc 21. Electrolytic capacitor 10 V 470 uF - 1 pc Terms of sales All returns are accepted. You should contact us within 30 Days after receiving the item. Contact us We will reply within 15 minutes. Our working hours: 8:00 - 18:00 (Eastern Standard Time) seven days a week. Please do not hesitate to contact us to resolve the issue before leaving negative feedback. Thank you! Payment We accept PayPal only. Delivery details We will ship you the item within 3 business days from the receipt of payment. We only ship item to your PayPal verified address. We check all items before sending out. All products are brand new, never been used or refurbished. Your item will be shipped from Ukraine and normally arrive in 5-7 business days to the United States (about 2-3 days worldwide).