Vintage Cameras & Lenses

Attention buyers from the USA! Delivery times from Ukraine to the USA are only 10-12 business days! I accept orders 24/7 New adapter DKL mount to Canon EF with programmable Dandelion chip original  4 generation. The chip has the functions: 1. Programming (the focal length and aperture are programmed into the chip). 2. The focus trap function (as long as there is no exact hit in the focus - the camera shutter will not work - this is the "autofocus in manual mode") 3. The adjusting confirmation point   function (if your lens has a back / front focus - the focus confirmation point can be shifted by +/- 17 steps 4. Stand-by function !!! (None of the Chinese EMF chip has this function). Without this function, the chip discharges the battery, even if the camera is turned off. What is in the box? 1. DKL mount-Canon EF adapter with programmable dandelion chip original 2. Canon EF rear cap BEST SERVICE BEFORE AND AFTER PURCHASE! This adapter is equipped with the focusing chip that works on all Canon cameras, including the newest models, including: Canon 5D mark IV, Canon 5D mark III, 5Ds, 5DsR, 1Dx, 1Dx mark II,  6D,   650D, 700D, 750D, 70D, 80D, 100D. I make the free programming of each chip . ( in the chip programmed focal length and aperture). I make a personal video clip to each buyer of the   adapter with chip, in this video clip I show completely programmed chip! all video recorded for buyers to look at my  YouTube channel:  Andrey Kuryanov This chip works on all of Canon SLR cameras, both of film and all digital Canon SLR models,  including  Canon 6D mark II, Canon 6D mark IV, Canon 5D mark III, 5Ds, 5DsR, 1Dx, 1Dx mark II, 650D, 700D, 750D, 70D, 80D, 100D,  and so on - everything! In the chip-dandelion, you can pre-program only one single value of the focal length and a single value of the aperture! During the shooting, these values in the dandelion chip do not change! These values can only be changed in the programming mode of the dandelion chip! The name of the lens is impossible to pre-program in a dandelion chip! Before buying an adapter with a dandelion chip, write to me the name of model your Canon camera and: 1. The name of the lens, for example:  50 mm f/ 2.0 2. The focal length,   for example: 50 mm 3. The aperture ratio (the value of the most open aperture),   for example: f  2.0 All customers receive detailed instructions on programming the chip. Прежде, чем Вы сделаете заказ и оплатите его, напишите мне в личном сообщении: 1. Название Вашего объектива, например Olympus OM 50/1,4 2. Фокусное расстояние, которое нужно запрограммировать, например: 50 мм 3. Светосилу объектива (значение максимально открытой диафрагмы), например 1,4 Все покупатели получают подробную инструкцию по программированию чипа в письменном виде. Так-же я предоставляю видео-инструкцию по программированию. FAQ Canon Dandelion Chip: How does the metering What aperture will be displayed on the camera The camera shows that the diaphragm, which is programmed in the dandelion. This diaphragm is fixed and does not change during the shooting !!! Exposure is calculated according to the actual luminous flux after you close the lens aperture to the desired value at the time of shooting. It does not matter what aperture programmed dandelion. Extract all the same to count correctly. ETTL works similarly. Just put the flash and shoot. Flash energy is calculated automatically. Are firmware affect the accuracy and regimes? Does not affect. The dandelion can be sewn F1.0 / 12mm and use, for example, with Samyang 500 mm .. However, modern ETTL flash will try to uncover the reflector in accordance with the sewn in dandelion focal length. In this case, you need to convert flash to manually enter the zoom mode. video version ( in russian) Basics of working with a dandelion chip for Canon cameras : The camera must be in Av mode, set the One Shot mode in the camera menu so that the shutter will fire when the sharpness appears. Each lens has its correct focus direction. Set the subject in 3-5 meters from yourself. Then open completely the diaphragm on the lens and in the dandelion, also set the maximum open value. Turn the sharpness from: 1. clockwise 2. counterclockwise by fully pressing the shutter release button and focusing on the center point. As soon as the lens becomes sharp - the shutter will work. Do all the same, only sharpness twist from infinity to zero. Compare 2 pictures, in one direction the picture will be either completely in sharpness or much sharper than the second, here in this direction always focus with this lens and, based on this direction, do the alignment of the confirmation point. PROGRAMMABLE CHIP SPECIFICATIONS A new series of Dandelions for digital and film cameras Canon EOS. Since the autumn of 2008 an updated Dandelion is being produced. The case is made of specially hard plastic, for better slip. And the contact areas are covered with a solid layer of gold. The new series received an important function - the programming function. Those. you can independently change the "stitched" in the Dandelion value of the aperture and focal length. And also the most important adjustment function, which allows you to cope with the problems of accuracy of confirmation of focus. The new Dandelion does not use the MF mode, as it was before. Now the focus logic works in AF (autofocus) mode. First, it increases the accuracy of focusing. Secondly, it allows you to adjust the Dandelion to different instances of lenses. Third - the audio confirmation now works on all cameras. For example, on a film EOS 3000N. The sensitivity of the focus sensors in this mode is an order of magnitude higher. There was also one more feature - "hard" locking of the descent to the confirmation signal. If you hold the shutter button all the way down, the picture will be taken instantly at the exact focus signal. This allows you to shoot dynamic stories. And of course the main advantage of the new series is the ability to change the parameters of the Dandelion independently, without removing it from the camera. Parameters of Dandelion