Ukrainian Magazine Pouch Mag Carrier MOLLE For AK 5.45, 7.62 Multicam Alpine

Ukrainian Special Purpose Tactical Pants Mabuta Mk-2 Camouflage MM-14 UA-Digital Brand - P1G-TAC® FIELD SUMMER PANTS "MABUTA MK-2" (HOT WEATHER FIELD PANTS) 8 pockets elastic inserts at waist and knees belt width up to 5.5 cm can be used bottom leg cuffs lined for extra durability patch pockets close with English buttons 4 D-rings for attaching additional equipment empty patch pockets fit snugly around the leg wide and rigid waistband with cushioning insert pant leg width adjustable with hook-and-loop fastener wide hook-and-loop fastener with individual adjustability back hip pockets can be used as empty magazine pouches removable knee pads that can be adjusted horizontally and vertically duplicating insert in front pockets for increased wearability when carrying clip-on gear fabric - Rip-stop Prof-it-On (60% Cotton, 40% Polyester) The history of the Mabuta suit dates back to Soviet times. It's a suit for hot climates that was popular among special forces, reconnaissance and paratroopers. In 2013, the P1G-TAC brand created a modern version called MABUTA Mk-2. The updated version retained all the best qualities of its predecessor and was supplemented with modern material and improved design solutions based on the trends of the 21st century field uniform. MABUTA Mk-2 pants are designed with eight pockets: two front slash pockets, two front hip pockets with flaps, two front hip pockets with hook-and-loop flaps, and two hip pockets on the back with flaps. Both pairs of pockets on the hip are closed with English buttons, which are easy to open when wearing gloves. Also thanks to this method of fastening the buttons increases the durability and decreases the chances of tearing them off. Rear hip pockets are equipped with an elastic band with a stopper in order to adjust the size of the entrance hole in the pocket and use them instead of magazine drop. The pockets have special creases so that the empty pocket fits snugly on the surface of the pants and evenly decomposes to accommodate everything you need. The waist area is wide and rigid with an internal cushioning insert. Therefore, a tight fit of the pants and good sweat absorption is ensured. The rear part of the waist zone has an elastic nylon insert, which allows you to maintain freedom of movement even when the waistband is rigidly fixed. Also this area is supplemented with wide waist slits, which allows the use of a wide waistband. They are equipped with four YKK D-rings for attaching additional gear. For freedom of movement in the knee area, it has an elastic nylon insert. To protect the knee joints in this model, there are integrated kneepads that can be removed if necessary. They are made of a combination of plastic uppers and soft cushioning. The fit of the kneepads can be adjusted: in height from the front pockets on the thigh, and in bounce using the elastic bands on the back of the kneepad. Bottom of the leg on the inner side is reinforced with duplicating pads. This area is also equipped with hook-and-loop cuffs to prevent dirt and sand from getting inside the shoes.

Made in Ukraine Size - 40*30* 120 cm Material - CORDURA 1000D MIL-SPEC Introducing our versatile universal seat mat, designed to enhance comfort in field conditions and dugouts. This essential accessory boasts excellent insulation properties, ensuring you stay warm and protected even in harsh environments. With this seat mat, you can quickly find comfortable positions for activities like shooting or resting. It acts as a reliable barrier against hypothermia and related ailments, allowing you to focus on your tasks without worrying about the cold. One of its standout features is its multifunctional design. Not only can it be used as a seat mat, but it can also serve as a sleeping bag liner, providing an extra layer of insulation inside sleeping bags or tents. Alternatively, you can utilize it as a standalone unit, offering comfort and insulation wherever you go. The seat mat can be easily attached to your equipment using the standard MOLLE system with Velcro, providing a secure and convenient attachment option. Additionally, it can be fastened to a wide adjustable waist belt thanks to the built-in fastex buckle, ensuring a comfortable fit during extended use. Crafted from durable Cordura 900D fabric, this seat mat offers exceptional protection to the inner insulating material, safeguarding it against damage and ensuring longevity. Enhance your outdoor experience with our reliable and versatile universal seat mat. Embrace comfort, insulation, and functionality wherever your adventures take you. Dimensions: 40 cm x 30 cm x 120 cm.

The lightweight and ergonomic warbelt will allow you to carry even more gear without sacrificing mobility and comfort. Its main function is to transfer the weight of the equipment to the hips and legs, unlike classic RPS, which load the shoulders and lower back muscles. The design of the warbelt was developed taking into account the features of modern warfare, so it is easy and comfortable to run, crawl and move in transport, including cars. After all, it is often necessary to use all the means available at hand to perform combat tasks. In the middle of the warbelt, a belt made of solid polyamide sling is stretched, which, if necessary, can be used as a standard military belt. Size adjustment is thanks to a strong fastex made of acetal. Also, the warbelt is equipped with attachment points for shoulder straps, which turns it into a full-fledged RPS.

Introducing our versatile Summary for Two Shots VOG (Grenade), designed to enhance your tactical readiness. Crafted with high-quality CORDURA 1000D fabric and a water-repellent coating, this summary ensures durability and reliable performance in various conditions. The fabric is resistant to wiping and has no IRR radiation, guaranteeing long-lasting use. With compatibility for M-406 (and other 40 mm) grenades, this summary offers exceptional versatility and functionality. You can trust it to securely hold and provide quick access to your grenades when you need them the most. The adjustable height, ranging from 13 to 18 cm, and the 12 cm width of the platform make it easy to integrate the summary into your existing setup. Whether it's waist belts, warbelts, RPS, or plate carrier camberbands, this summary fits seamlessly without restricting your movements. You'll experience uninhibited mobility and quick access to your grenades, ensuring readiness in any situation. The upper part of the valve is reliably secured with a metal button, ensuring your grenades stay in place and are easily accessible when required. Furthermore, this summary isn't limited to just grenades. It can also accommodate a light-noise grenade or a gas canister, expanding its usefulness for various tactical scenarios. Upgrade your gear with our Summary for Two Shots VOG (Grenade) and be prepared for any mission or situation that comes your way. Invest in quality and functionality today.

BODY ARMOR PLATE CARRIER ASSAULT PLATE CARRIER "APC" II GEN. weight - 800 g MOLLE system adjustable fit for body and shoulders loops on shoulder straps to secure cables plate holder dimensions - 32 cm H x 26 cm W not recommended for use with steel or heavy ceramic plates hook-and-loop panels on the front for fixation of identification marks suitable for armor plates up to Class 3 weighing up to 2 kg (e.g. DYNEEMA) material - 1000D Cordura The Assault Plate Carrier Gen. II  is a comfortable and functional body armor with the ability to accommodate additional gear. It is designed for use with lightweight armor plates up to class 3, for example DYNEEMA or their analogs weighing up to 2 kg. The APC is designed with MOLLE system and adaptive adjustment system for any user. There is a MOLLE panel on the front and rear panels, and also the chamberband consists of MOLLE cells, which allows to place additional equipment. This can be additional pouches, a radio or gloves on the carbine. It is also possible to attach utility or pad pouches thanks to the additional MOLLE sling at the chamberband fixation point. The material from which the APC Plate Carrier cover is made is high quality and strong Nylon 6.6. This fabric can withstand the daily stress and increase the life of the product. The Assault Plate Carrier Gen. II  is a reliable and extremely functional body armor that is always ready for work or the next training day.

Upgrade your tactical gear with this comprehensive Tactical Vest Set made from ultra-durable Cordura 1000D material. Designed for optimal functionality and resilience, this set includes essential components for various mission requirements. Plates are not included. Key Features: Material and Construction: Crafted from waterproof Cordura 1000D material and sewn with strong nylon threads for maximum durability. Complete Set: Includes a slab carrier for quick reset, pouches for automatic stores (3 pcs.), pouch for grenades (2 pcs.), bags under the turnstile (2 pcs.), first aid kit organizer (1 pc.), bag for resetting automatic horns (1 pc.), and a set of tactical carbines. Quick Release Hardware: Equipped with 2M DUE EMME ROC 40 and 80 quick-release hardware for efficient and rapid deployment. Mesh Fabric: Features mesh fabric on the inner part of the plate holder for enhanced comfort and breathability during extended wear. Adjustable Volume: Allows volume adjustment from 90 to 140 cm, ensuring a secure and comfortable fit. MOLLE System: Utilizes the MOLLE system on the entire surface of the vest, providing versatile attachment points for additional gear and accessories. Plate Sizes: Accommodates main plates (250x300 mm) and side plates (150x200 mm), suitable for base plates with a thickness of 5-25 mm. Weight: Weighs 1250 grams, providing a lightweight yet robust solution for tactical operations. Enhance your tactical readiness with this Tactical Vest Set, offering a combination of functionality, durability, and adaptability for various mission scenarios.