Wood burning camping stove with built-in air pump block Airwood Heavy Duty АА
Shipping information
Please sign in so that we can notify you about a reply
Description
This burner model is specially designed for long-term use in harsh environmental conditions!
The solid fuel camping stove "Airwood Heavy Duty AA-H BM" will be a reliable companion for hikers who enjoy long trips (a month or more) in a marine, tropical climate, or other aggressive conditions for metal products. All connections of the dish bracket and combustion chamber are made with stainless steel fasteners. All of the most vulnerable burner components are made of highly corrosion-resistant stainless steel!
Thanks to the air supply block, the burner provides powerful heating even when using raw wood and quickly brings water to a boil. The boiling time for 0.26 US gal lqd of water is from 5 minutes, depending on the fuel quality and environmental conditions.
The burner has a fuel combustion efficiency of up to 80% compared to the 5-7% efficiency of a regular fire. This is because about 90% of the particles in wood smoke are unburned due to lack of oxygen. When fresh air is supplied to certain areas of the burner's combustion chamber, these small particles burn. This is the principle behind this burner: cold air from the supply block enters the side opening at the bottom of the outer wall of the burner housing. Under the action of the fan, one part of the air is pressurized into the openings at the bottom and lower part of the combustion chamber, while the other is directed upwards between the walls of the combustion chamber and the housing, where it heats up and exits through special openings, entering the upper part of the combustion chamber, providing ignition of wood gas.
Intense tongues of flame are formed where the air exits, due to oxygen enrichment.
The burner can effortlessly prepare food (soup, porridge, tea, etc.) with a volume of up to 0.79 - 1.06 US gal lqd.
Branches, twigs, and any other available solid fuel can be used as fuel.
The air supply unit (blower) for the combustion chamber is equipped with a three-position switch with the following modes:
Middle position - "Off" (the furnace operates in natural draft mode with the blower disconnected),
Upper position - "High speed" (~ 3000 rpm) - for instant ignition and boiling of water,
Lower position - "Low speed" (~ 2000 rpm) - for maintaining high-temperature flame.
The air supply unit, which comes with this burner model, is powered by two AA batteries or two AAA batteries (with adapters for AAA batteries to AA batteries - included).
Continuous operation time of the unit from AA batteries:
• in "High speed" mode: ~ 30 hours;
• in "Low speed" mode: ~ 50 hours;
The air supply unit is equipped with a motor shielded from thermal radiation and dust and moisture insulation at the IP55 protection level. This improvement allows the burner owner to use it in conditions of increased humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the motor will stall at the most inappropriate moment.
The burner comes with an updated version of a collapsible stand for cookware. This accessory has increased heat resistance and is specially designed for more stable placement on the burner of round pots (pans) with a wide bottom. The stand will appeal to fans of morning coffee in nature, prepared in a Turkish coffee pot (cookware with a small diameter bottom).
Thanks to the folding legs, the collapsible stand will be "convenient" for cookware with a bottom diameter of 5 cm and cookware with a bottom diameter of 25 cm! After unfolding, the legs are fixed at a certain angle to the horizon, thus ensuring a reliable grip of the cookware's bottom, and when the load is increased, the legs take a horizontal position, while the upper part of the stand's fabric slightly spreads outward around the entire circle, increasing the rigidity of the stand and stability of the cookware.
The new stand differs from the previous version by the presence of ventilation holes in the form of the manufacturer's brand name. This change reduced the total area of ventilation holes on the stand fabric, which improved the wind protection characteristics of the stand and increased the burner's power. In addition, the text on the stand allows distinguishing the original product from a copy right away. The height of the stand's fabric was also reduced, which increased the rigidity of the structure and improved the heating of the cookware's bottom.
A new combustion chamber installed in the burner significantly differs from the old version: the number, diameter, and configuration of air injection holes have been changed to improve the quality of wood burning in the lower part of the chamber. It was possible to eliminate clogging of the chamber with smoldering coals and improve the burning of raw wood, thus adapting the burner to real field conditions, where dry wood is scarce. In addition, the new version of the chamber allows for stable combustion of fuel in natural draft mode (with the booster block disconnected from the burner) - this feature is very important for cooking dishes that do not require intense flames.
In this burner model, the combustion chamber has thicker walls and a larger volume compared to the combustion chamber of the classic turbo burners of the "Airwood BM" series. All chamber elements are made of high corrosion-resistant stainless steel. The combustion chamber is rigidly assembled (screwed connection) with a housing that has standard dimensions for the "Airwood BM" series turbo burners.
The outer casing (body) of the "Airwood Heavy Duty AA-h BM" burner has a closed bottom, which creates a closed space between the two walls of the burner (between the combustion chamber and the body), meaning all air from the blower is guaranteed to be supplied to the combustion chamber. Thus, there is no need to search for a flat surface to place the burner, as this type of burner can even be used in a suspended state! Another advantage of the burner with a closed bottom of the body is that there are no burns left on the ground after its use, as after a bonfire. The bottom of this model is made of highly corrosion-resistant stainless steel.
In this model of the burner, the body is equipped with a removable handle-grip, which allows you to change the position (adjust) or move the burner during its operation (burning). This feature will come in handy in case of sudden weather changes - you can quickly and safely move the burner to a more protected place in case of sudden rain or wind gusts.
Metal material: stainless steel of different grades and thicknesses (0.01 inch - 0.03 inch.);
Features:
Resource: up to 800 hours of burner operation depending on storage and use conditions;
Volume: 28.0 fluid ounces;
Dimensions:
In the packaged state: height 5.31 inches, diameter 4.72 inches;
During use: height 6.89 inches, diameter from 4.72 inches to 6.3 inches.
Total weight of the burner together with the case, handle holder, batteries: 1.32 lbs.
Package includes:
1.Burner assembly with bottom and high-corrosion-resistant combustion chamber;
2. Reinforced heat-resistant folding stand for cookware;
3. Air injection unit powered by two AA batteries;
4. Removable burner handle;
5.Strong waterproof "Oxford" fabric case;
6.Instructions for using the burner;
7. Two adapters for AAA batteries to AA batteries.
More from this vendor
Reviews
Shipping and Policies
This store is integrated with the Western Bid™ e-commerce platform, and Western Bid, Inc. is the Merchant of Record for all purchases made in this store. Therefore, you will see "WESTERN BID" listed as the payee on your PayPal account and credit card statement.
I accept PayPal or Credit Cards only.
• Your items will be made and shipped only after the payment is cleared.
• If you don't have Paypal account and would like to pay with your Credit Card, check this step-by-step tutorial on PayPal:
https://www.paypal.com/webapps/mpp/pay-online
Your order will be shipped only after the payment is cleared. This means if you pay via Paypal e-checks there could be delay in 3-5 business days. You can check the status of your payment in your Paypal account or in the correspond invoice here on Lavky.
All the items in the order will be securely packed and shipped within 1-3 working days of payment.
Some items may take longer. If the processing time is more than 7 days, it is clearly stated in the product description.
Delivery Address:
• Please make sure your shipping address is correct at the checkout.
We will ship your order to the address specified on Lavky.com checkout, and not to the address specified on Paypal.
Terms of Delivery
We always ship parcels with a tracking number. We will update you on the tracking number once your order has been prepared and shipped.
Usually delivery takes between one a half and four weeks.
Please note that delivery times may vary depending on your location and customs clearance, so we cannot guarantee the exact time of arrival.
Here are the approximate delivery times:
- USA: 1.5 - 2.5 weeks
- Canada: 2-3 weeks
- Europe: 1-2 weeks
- Australia: 2-3 weeks (sometimes longer, depending on Australian customs)
- The rest of the world: 2-3 weeks
Delivery method
We ship all the parcels from Ukraine (from our logistics centers in Kyiv and Chernivtsi) via international services (FedEx, UPS) in two stages.
First a parcel is sent by express delivery service to Europe, and then, it is shipped by air mail to the United States, Canada or Europe.
You can see the movement of the parcel by a tracking number only in the second stage - 4-6 days after sending your order from our center. We estimate the delivery time to 12-18 days.
Express delivery is available only on individual request. Please contact us if you need Express delivery before placing an order so we can update shipping options.
Customs duties and taxes
Customers are responsible for any fees, taxes and duties related to delivery and ordering products to their country of destination.
Packaging
Your order will arrive in a safe cardboard box, with due packaging and protection from damage.
I want my clients to be happy, so let me know if you have any problems.
If you are not satisfied with your items / service for any reason, please contact me with the problem before leaving a feedback.