Home & Outdoor

This original oil painting on wooden slice will be a GREAT DECOR for home, bar, restaurant or UNIQUE GIFT for your kids, friends and relatives. KIDS LOVE IT! It comes READY TO HANG with a metal mount on the reverse side. You can also PUT it ON a SHELF. I use high quality oil paints, and varnish finish. The wood has been naturally dried without any chemical use and treated with acrylic lacquer. It's signed on the back. Please note that the colors may look different depending on your screen lights. Take a look at My art & jewellery here https://www.etsy.com/shop/LucyKozyra?ref=seller-platform-mcnav SHIPPING It will be ready for shiping within 1-2 business days Delivery time - within one-three weeks and will vary depending on the country of origin and destination. Please note, due to the pandemic delivery time was extended. For example, delivery to Europe - about 8-12 days, United States and China - about 14 days, Israel – about 12 days. Please write me to check delivery time to other countries. Unfortunately, due to a pandemic, I can't guarantee delivery time, as it depends heavily on the work of the post office in your area. RETURNS Returns and exchanges accepted. Refund will be provide after receiving the undamaged item. Shipping costs are on buyer's responsibility. To prevent your return, feel free to ask me any question u may have. I can send you additional detailed photos or a video review of the artwork. Your satisfaction as my customer means everything to me, so please don't forget to write me a review or if you're not happy with anything get in contact and I'll try my best to make it right. STORAGE CONDITIONS: The storage temperature optimal for painting is +19 - 21 ° С, and the ideal humidity is 50-55%. Do not hang (put) the artwork near heat sources, in rooms with high humidity and in direct sunlight. Do not place anything on top of the artwork. To clean the painting from dust recommended: Wipe dry with a rag; do not press hard; never use any chemical cleaners to clean your painting.

This original oil painting on wooden slice of triangular shape will be a GREAT DECOR for home, bar, restaurant or UNIQUE GIFT for your friends and relatives. I use high quality oil paints, and varnish finish. The wood has been naturally dried without any chemical use and treated with acrylic lacquer. It's signed on the back. It comes READY TO HANG with a metal mount on the reverse side. You can also PUT it ON a SHELF. Please note that the colors may look different depending on your screen lights. More art https://www.etsy.com/shop/LucyKozyra U can Also buy a Digital file of pizza pie painting. You can print it in size up to (up to 55x55 cm = 21.6x21.6 in)! Print at home or choose Printing service at your city, or upload the files to an online printing service and have your prints delivered to your door! https://www.etsy.com/listing/917092849/pizza-digital-printable-food-wall-art?ref=shop_home_active_7 SHIPPING It will be ready for shiping within 1-2 business days Delivery time - within one-three weeks and will vary depending on the country of origin and destination. Please note, due to the pandemic delivery time was extended. For example, delivery to Europe - about 8-12 days, United States and China - about 14 + days, Israel – about 12 days. Please write me to check delivery time to other countries. U can Upgrade your SHIPPING (up to 10 days). Unfortunately, due to a pandemic, I can't guarantee delivery time, as it depends heavily on the work of the post office in your area. RETURNS Returns and exchanges accepted. Refund will be provide after receiving the undamaged item. Shipping costs are on buyer's responsibility. To prevent your return, feel free to ask me any question u may have. I can send you additional detailed photos or a video review of the artwork. Your satisfaction as my customer means everything to me, so please don't forget to write me a review or if you're not happy with anything get in contact and I'll try my best to make it right. STORAGE CONDITIONS: The storage temperature optimal for painting is +19 - 21 ° С, and the ideal humidity is 50-55%. Do not hang (put) the artwork near heat sources, in rooms with high humidity and in direct sunlight. Do not place anything on top of the artwork. To clean the painting from dust recommended: Wipe dry with a rag; do not press hard; never use any chemical cleaners to clean your painting.

This original acrylic painting on hardboard will be a GREAT DECOR for home, bar, restaurant or UNIQUE GIFT for your friends and relatives. It comes with wooden frame and mounting. Artwork size (with frame) 11.4"11.4" (29x29 cm.) Painting size 9.8"x9.8" (25x25 cm.) I use high quality paints, and varnish finish. Please note that the colors may look different depending on your screen lights. More https://www.etsy.com/shop/LucyKozyra?ref=seller-platform-mcnav SHIPPING It will be ready for shiping within 1-3 business days Delivery time - within one-three weeks and will vary depending on the country of origin and destination. Please note, due to the pandemic delivery time was extended. For example, delivery to Europe - about 8-12 days, United States and China - about 7-14 days, Israel – about 12 days. Please write me to check delivery time to other countries.

menu covers with elastic band

menu board with clip

QR codes table stands

These finishes are often used by my clients as finishing for cornices or decorative architectural details. Base diameter is 2 inches (51 mm) They are unpainted and have a natural wood color. You can paint them yourself, choosing a color for your interior and furniture, or simply varnish them while preserving the natural wood pattern. These models are made of oak or alder wood. You can choose the mounting option yourself: a mounting pin, a screw or the flat plane of the base part. If you like my work, but you want a different shape or another size of the same shape, write to me and tell me about your wishes and I will try to help you.

This unpainted finish is made from oak wood. Ideal for renovating stairs or as a bed decoration. If you need half of this final for a wall installation, I can do it for you. I can make a final according to your drawing or a sketch for your sizes. The finials are not painted and you can choose the color you want and paint them yourself. If you need a mounting pin at the bottom please let me know. I need no more than 2 weeks to complete the order. Email me in advance if you need more. At the end of the work, I will provide a photo and if you like everything, we will make a deal.

miniature plush toy in a case

Key Hook Organizer/Key Holder/key Hook Size: 9.25" W x 7.1" H x .8" D Key holder have two mounting holes.Attaches with nail or screw (not included)

Fully FLAX filled mattress covered natural linen Size: 54x75x3 inches. Filling: 2 thin hard flax layers and a few soft. Covering: 100% natural linen fabric, medium-weihght linen  (OEKO-TEX 12.HBY.02843 HOHENSTEIN. Bleached and acidified linen, woven fabrics for table and bed linen, STANDARD 100). Color:  natural flax grey, like oatmeal. It's really unique product. Natural flax fibers affixed without glue into a single continuous layer and has its antibacterial and health qualities. It does not require heat treatment, it can not be washed. One thin natural flax layer is sewn to the top of the mattress cover and another to the bottom. Than we put soft flax layers in the mattress cover and get a ready made mattress. The cover is from natural linen.  It is not a removable linen cover. The mattress cover is made with a short zipper on one side, so you can see what is inside of the mattress. Our mattresses have one of the functions to isolate the human body from synthetic materials. A natural properties of flax safeguard against harmful bacteria and do not create a "greenhouse effect". Flax is grown on a farm without using any chemicals and pesticides. We don’t use the impregnations, fire retardant and other chemical additives. We don't use wool! It's good for all. Not allergic! The mattress has a light smell of summer meadow hay, which fades gradually. About firmness: Please note, these mattresses are soft enough. We can describe maybe on scale from 1 to 10 points.  1 is being the softest (like sleeping on cotton balls), 10 is being the hardest (like a hardwood floor). So these mattresses are about 5 points on the scale. It’s medium soft. CARE FOR MATTRESS: DRY CLEAN ONLY! Can not be washed. Contains natural chemical free flax. The mattress needs to be ventilated 1-2 times a year outside on the Sun. But if it gets wet or something else, it can be wiped off and dried. You can rub the stain with soapy water, then rinse with cool water and dry. The worst that can happen it can leave stains on fabric, as flax is natural. But don’t worry, flax doesn’t lose its health properties for 90 years (according to the scientists tested). This flax is not chemically processed and will continue to give you joy and health. You can use it along, without anything else. But if you like high mattresses, you can put our mattress on the top, like a topper and enjoy its natural healthy qualities. The mattress needs natural mattress case or fitted sheet to save it for a long time. We can sew it for you from 100% natural linen with pleasure. Ready to ship within 5-9 business days. Shipping time: 10-25 business days by Standard International delivery.

Description Finals are made of solid hard wood (ash and black maple). Not painted and oll ready for painting in any color that fits to the of Ansonia  Monarch clock which you restore. Before sending, I can send you a photo of exactly the details that you get, just let me know about this. You can see all the dimensions of the goods in the photo. On the mounting spire there may be slots from the clamp of the machine that do not affect the overall diameter of the fastening!  If you did not find the finish you need on my page, write to me and I could make a lot for you according to your drawing.  You get exactly those product that are in the photo. Look carefully at the photo. If the product has technological holes or flaws, you will learn about it from the description. Product will be packed in a light and strong foam box. You will save on delivery, buying a few lots. I combine shipping. If you have questions, ask. I will gladly answer! Terms Sending mail takes place within 2-5 days (Depending on the schedule of work of mailpost offices). In advance I apologize for such inconvenience. On the day of dispatch I will send you the track number to track the parcel. Payment On-line payment is the most easy and convenient, so would you make payment  in 1–3 days period please. On receiving you payment, I’ll collect your order and send it to you. You can also pay through PayPal. If you want to participate in my auctions, you can pay after completing all the auctions in which you want to participate. Delivery If you’ve changed your address, or wish the parcel to be delivered to another address, please be sure to change the address in your settings while making your payment through PayPal. Otherwise I will not be responsible for the parcel loss. On receiving your payment, I’ll pack your order and send it by post.  Everything that you buy will be packaged in one parcel, for saving your delivery fee. Time of delivery depends on distance and postal services functioning. I’ll do my best to send parcels by air, for you to receive your order as fast as possible.

Finals are made of hard wood oak. Not painted and   is ready for painting in any color that fits to the  Ansonia Capitol  clock  which you restore. The mounting spire can have slots from the clamp of the machine that do not affect the overall diameter of the mount! Before sending, I can send you a photo of exactly the details that you get, just let me know about this. The diameter of the mounting pin is 10 mm (0.39 inches) If you did not find the finish you need on my page, write to me and I could make for you according to your drawing. 

Description Price is for one  finial. Finals are ideal for the restoration models of  Brewster & Ingraham  Clock . Corresponds to the size of the original finals. Made of hard wood varieties (ash or black maple).  Before sending, I can send you a photo of exactly the details that you get, just let me know about this. You can see all the dimensions of the goods in the photo.  Please check them before purchasing, because some models are slightly different sizes. On the mounting spire there may be slots from the clamp of the machine that do not affect the overall diameter of the fastening!  If you did not find the finish you need on my page, write to me and I could make for you according to your drawing. 

Gorgeous glass vase with famous Koi carps. It is hand painted in Asian style and will be a great table centerpiece, wonderful present for wedding, anniversary or a stylish housewarming gift. It will be a perfect gift for those who love japanese or chinese art. This vase is a real pond with red and gold Carp Koi fish and beautiful water lilies. Can be used for flowers or as an artificial aquarium, if you can not have the real one :) Painted by hand with water and sun resistant transparent paints in stained glass technique Dimensions of this vase are 10*6,7in (26*17 cm). It may be used with stand or without it. I use only high quality paints based on organic solvents. They are weather resistant which means they are not afraid of water, sun and cold temperature. This assures long life for all of my products. This vase is made to order and it takes 1 to 3 weeks depending on how busy I am with other orders. If you are in a hurry or want this kind of vase but another shape or dimensions - let me know and we will work it out!

miniature toy in an egg

Hecate altar tile Hekatê of the Path, I invoke Thee, Lovely Lady of the Triple Crossroads, Celestial, Chthonian, and Marine One, Lady of the Saffron Robe. Sepulchral One, celebrating the Bakchic Mysteries among the Souls of the Dead, Daughter of Persês, Lover of Solitude, rejoicing in deer. Nocturnal One, Lady of the Dogs, invincible Queen. She of the Cry of the Beast, Ungirt One, having an irresistible Form. Bullherder, Keeper of the Keys of All the Universe, Mistress, Guide, Bride, Nurturer of Youths, Mountain Wanderer. I pray Thee, Maiden, to be present at our hallowed rites of initiation, Always bestowing Thy graciousness upon the Boukolos. material: plywood, acrylic paint dimensions: 4"x 0,24" inches Size diameter: - 4" x 0.24 inches Color: brown, black Ready to ship 1-2 days Time of international delivery 1-2 weeks If you have any questions, please ask me. Thank you for visiting BabylonMagicHouse! I also invite you to my Instagram: @babylon_magic_house reddit: #BabylonMagic https://pl.pinterest.com/babylonmagichouse/

My toys can be washed in a shirring machine 30-40 degrees without spinning. They dry out quickly. High density fleece material. Sintepon of the highest quality. I use machine embroidery. You will never regret buying such a toy from me. Available for order: Fiery leon Shark Leon 8 bit Srow Fire raven White Raven Nani Nita Leon werewolf Spike Sakura Leon Sally Sandy sleepy Sandy pink Sprout Spike Elprimo Leon

WALL WOODEN WORLD MAP WITH MOSS Make your wall — a piece of art with our World Maps! Our wooden map with moss was created to make your apartment or office very, very beautiful (we checked). She replaced the old boring empty walls. It is hundreds of times better than any picture and much more interesting than photo frames. ⠀ All other maps of the world are already fluttering before her. This Wooden World Map was created to become the perfect present for travellers with great taste in interior design. Explore the world from the comfort of your own home with our Map! Our maps are eco-friendly and will last a lifetime.  People will just love it! It will be your decor, it will be your motivation to travel and it will be your pride. ASSEMBLY: ✔ You’ll need around 1 hours for assembly, which can be a great way to spend time with family and friends. ✔ The map can be removed from wall without damage if it’s done carefully. Message for instructions.

dollhouse miniature toys

♥ ♥ ♥ INCLUDES ♥ ♥ ♥ One nursery mobile contains: • 1 big crown, • 11 clouds, • 3 little crowns, • 3 drops, • 10 wool balls • and many small details. They are suspended from a white wood hanger, about 10.5' x 10.5". This item made by hand - no machines involved. We hand-cut, hand-sew each item with a quality eco-friendly felt. The wood hangers are also handcrafted. Delicately filled with polyester fiber filler. Making each mobile with lots of love and care! ♥ ♥ ♥ MOBILE SIZE ♥ ♥ ♥ 16" in height (from the top of the hanger to the lowest star) 10.5" in width

Automatic lighting system for steps of the ladder "SmartStairway SS-26" The new model is a set of automatic LED backlight stairs allows you to connect up to 26 steps of stairs.   Now you can use as a pyroelectric infrared sensors and ultrasonic rangefinders, in any combination, as you need. Version 3.12.   Additions in this version: - Added blocking of polling of pyroelectric sensors for powering up the system for 90 seconds. This allows you to avoid erroneous light on the stairs as a result of erroneous operations of the pyroelectric sensors during their heating during the first 90 seconds after turning on the power. Now you can use timers with the system, smart sockets compatible with Google House, Amazon Alexa and other systems requiring a complete power off of the system. Now the system will not cause false inclusions. - Added the ability to dimming all steps in 8% increments in the range from 20% to 100% brightness. The brightness of the attendants (first and last steps), as before, is adjusted separately in the range from 0 to 100% - Added system reset function to default settings. If you unconsciously changed the settings and do not know what and why you changed, you can return the system to the default settings. Read more in the user manual. The controller for an automatic lighting of stairways by means of low-power LED light sources. One controller is able to provide coverage of from 4 to 26 stages. The controllers have the ability to enable consistent, which allows to increase the possible number of steps almost to infinity. The system provides a flexible configuration for any customer requirements. The controller can be used in conjunction with a light sensor, or without it, with passage switches simple pyroelectric (infrared) and digital sensors to ensure smooth movement series circuit when the signal from the sensors in the direction of movement of people included on the ladder. The controller has a customizable interface and intuitive settings available. Easy to install.    The controller is made in a plastic case that can be mounted on DIN-rail or attached to the surface by means of screws or screws. (see photo)   User Guide in English can be downloaded here   https://shop.xopc.net.ua/files...   ,  https://shop.xopc.net.ua/files...   -  PIR Sensors manual (copy the URL and paste it into your browser for downloading)   Specifications 1. The number of channels (the number of connected steps)  4...  26 pcs. 2. DC supply voltage of   12-24V. (The input voltage is DC 8-25V. Depending on the required voltage for your fixtures)  3. The maximum current load on one channel  (per steps)   I nom. 0.4A  (I max 0.5A)     (4.8 W for luminaires 12V ; 9.6W for lighting fixtures 24V.) 4.  Sensing elements  - PIR digital sensors, or ultrasonic rangefinder.  - digital photo sensor  (unboxing ). 5. Power Digital Sensor outputs:      DC 5V 6. Protection IP20 (indoors, not waterproof) 7. Ambient temperature   -5 ... + 50`C 8. Controller Case Dimensions   115x90x41 mm 9. Controller Power Consumption standby time (up to):  0,3W. 10. Power consumption controller under load (max):   3,5W 11. The maximum total allowable load capacity (max):  If Vinput = 12V - 125 W. (max 156W) If Vinput = 24V - 250 W. (max 312W)                                                                  The kit, depending on the option you choose, includes: (The kits do not include a  power supply  and lights or LED stripes. The power supply should be selected based on the power and the number of steps you use. You can choose LED lamps or LED strips based on your tastes and desires, but make sure that the power of each step is not more than 400 mA.)  "PIR standard" KIT:        -Controller SS-26 - 1 pc.       - Pyroelectric sensors PIR-SR501 - 2 pcs.       - Light sensor - 1 pc.       - Box, user manual.   The main advantages of the system .   1. Small body size and its convenient mounting  embedded and external boxes. 2. Digital motion sensors in the standard wiring boxes.   3. External light sensor allows you to choose the installation location with a constant light level is not dependent on or off lighting stairs or more light sources.   4. Easy and intuitive customization system.   5. Adjustable "light duty" first and last steps of a ladder.   6. Ability to connect through passage switch for lighting control at any time, regardless of the lighting conditions.   7. Low power consumption.   8. Long service life of LED light sources (tape or spotlights).   9. Easy installation and operation.   The algorithm of the system        When the sensor has exposed the movement, the staircase lights are illuminated in the direction of the person's movement at the speed set in the system settings. After the waiting time has elapsed, the illumination of the steps set in the system settings is switched off in the reverse order. If during the illumination of the entire ladder the sensor detects motion, then the timer is reset to zero and the time until the light is turned off is considered from the moment when the sensor ceases to see the movement of people on the stairs.  If the movement on the stairs on the other side is detected while the backlight is on, the illumination is switched on in both directions. It also turns off in the reverse order. If you press the "Down" or "Up" button, the backlight turns on from the pressed button and will be on until either of these buttons is pressed. The operation of the sensors is not taken into account. The "up" and "down" buttons on the controller are connected to the digital inputs of the controller "Up button" and "Down button". To these inputs you can connect additional buttons without fixing. For example, buttons for doorbells. See the diagram of the connection in the PDF file, the link to which you will find below. Additional buttons are not included.       Using a light sensor.   The controller can be used as a light sensor and without it. When connected to the controller light sensor should activate its use (claim 1. Setting) or deactivated when not using the sensor. The sensor should be installed in such a place that it would not be reached by light from indoor lighting and the lighting levels themselves. Digital sensor delivers a logic controller port 0 when the lighting is not sufficient or logical unit if the light level is less than the set limit. When the lighting is activated by light duty first and last stages and the controller is allowed to turn on the backlight levels for the signals from motion sensors depending on the selected algorithm (see. Above). When driving on the stairs when the backlight is switched on or suddenly steps onto the sensor light gets brighter light controller activation threshold - the staircase lights and duty levels off and the controller will go into standby mode. Job motion sensors and processing of people on the stairs counters maintained even when the lights on the signal light sensor is not implemented.   Using the motion sensor.   The controller allows you to connect any motion sensors, which you need. It can be both pyroelectric or ultrasonic. You can connect both sensors of the same type or a single pyroelectric and ultrasonic in any combination. The default factory setting for the width of the stairs of the ultrasonic sensor is set equal to 0.8 meter. The movement will be determined if the distance to the obstacle is reduced by more than 10 cm. Measurements of ultrasonic sensors are carried out by calculating the average value of 5 measurements, that virtually eliminates false positives when using ultrasonic sensors. If necessary, you can easily change the width of the stairs through the controller setup menu in step 7. Details can be found in the user manual URL: https://shop.xopc.net.ua/files...   Note!  Ultrasonic sensors have certain technological shortcomings. Their principle of operation is based on the reflected high frequency sound. Therefore, ultrasonic sensors can not detect an obstacle if a person is dressed in a sound-absorbing clothes and have a certain delay in the work, because return time of the sound wave takes from 50 to 500 Milis We recommend used pyroelectric sensors, whenever possible. The use of ultrasonic  sensors is justified only when the staircase has no handrail or banister is delicate and next to the stairs is communicating zone through which people move and it may cause false triggering of illumination ladder pyroelectric sensors.To connect the ultrasonic sensor to use a shielded twisted pair wire with a cross section view of the length of the wire, but not less than 0.5 mm. square (AWG20). Braided shield is recommended to ground. It is recommended to avoid the length of more than 10m. If the wire is longer than 10m, should be applied thicker wire.     Ultrasonic sensors are not recommended to be installed at a distance of 50 cm from the floor or wall as this may cause false switching on the system.     The presence of other ultrasound sources in the sensor area may cause erroneous triggering.       Also note that ultrasonic rangefinders are capable of measuring distances of not more than 1.5 meters. If the distance to the reflective surface is very large or there is no such surface at all in front of the sensor, the sensor causes the backlight to be delayed for each stage for about 1 second. In such cases, you should try to pick up the installation site so that the sensor can see what kind of close-lying wall or obstacle or refuse this type of sensor.       Important. Dear buyer. All products sent to you are tested on the stand for at least 72 hours. Also, before shipping the entire kit is tested for all functions and ports. After testing, the product is packed and shiping to you. After shiping, I provide you with a link to Youtube with a video report of checking and packaging your product (the video on YouTube is saved as confidential information and is only viewable to you). This allows you to completely exclude possible hidden defects, as well as disputes on health issues or product conformance. You can be sure that you get exactly what you see in the photo and video.    Please be very careful when connecting the product. First, mount the step lights and check the performance of each step separately by connecting them to the power source. Keep in mind that the power of the luminaires of one step does not exceed 0.4A (when the voltage of the luminaires is 12V - 5W, at a voltage of 24V - 10W). Exceeding the power of the fixtures or closing the wires of fixtures or LED strips will result in the failure of the output keys of the system. Check the polarity of the wires and sensors connected to the inputs carefully. Violation of the polarity or wrong connection of wires to the inputs can lead to the destruction of the microprocessor of the system and its failure. To the output + 5V only sensor power can be connected. The maximum load power to be connected to the "+ 5V" output must not exceed 500mA. Any damage to the product that may occur during improper connection or violation of the usage rules is not guaranteed and claims for them are not accepted. If you have any questions about the connection, ask them to me. I will gladly answer your questions. It is better to ask a question before the connection starts, as this will save a lot of time and effort, and also will save your ladder in good condition.   A detailed video guide to connecting and configuring the system is available at the following link to YouTube. Connecting LED strips or LED lighting fixtures. First step. First, mount the LED strip. Connect all "+" clips to one lead to the "+" terminal of the power supply. Then manually alternate and one-by-one connect the "-" wire from each step to the "-" terminal of the power supply. Make sure that all steps work correctly and there is no wire shortage. Also, make sure that there is no problem in the soldering points of the LED strips. If the tapes are mounted on a metal base, pay attention that the tapes do not close on the ground. Only convinced that everything is assembled and connected correctly and the power of one step does not exceed 0.4A (for a voltage of 12V nominally 4.8W, maximum permissible 5W.) Go The second step. - Disconnect the power supply from the mains. Connect the test leads from the steps to the corresponding wires of the controller outputs. Note that the first step is connected to the "Out01" output, and the last step to the "Out26" output. The second step to "Out02", the third to "Out03" and so on. If you use fewer steps than 26, the last step is still connected to the "Out26" output. After connecting all the steps and checking the correct connection of the wires and isolating them, you can turn on the power supply. Note that shorting the wires "+" and "-" of the LED strip will result in exceeding the permissible power of one step and failure of the output on which there was a short circuit or even all groups of 7 steps of the chip on which there was a short circuit. Please be careful. In this case, the first and last steps will be put on standby. By pressing the "Up" button "Down" you can check the LED strip lights. After that, turn off the power supply and connect the sensors according to the user's manual. Then turn on the system and adjust the number of steps you need. By default, the use of all 26 steps is enabled. If you use fewer steps and have not adjusted the number of steps used, then when you enter from the top of the step "Out26" to the next one, there will be a large delay in time during which the controller will include unused steps. For ultrasonic sensors, the quality of the wires used is important. This should be a twisted pair of 0.5mm. square is necessarily shielded. Also, ultrasonic sensors may not work correctly when using sound-absorbing clothing or coatings. All features of ultrasonic sensors are described on the product page and in the user's manual. Frequently Asked Questions - Can I use a system with a 5V DC power supply? The system is designed to operate with a supply voltage of 8 to 25V DC. Working with power supplies and luminaires with a voltage different from the specified can cause damage or not stable operation of the system. - What kind of lamps can I use? The system is designed to be used in conjunction with dimmable LED lights or LED stripes with a voltage of 12 or 24 VDC. The current of the luminaires or LED strips should not exceed 0.4A (0.5A maximum, taking into account the resistance of the wires at the point of connection to the controller) for one step. Exceeding the current will lead to system failure. So for one step, the maximum power of luminaires with a supply voltage of 12V DC is 12V * 0.4A = 4.8W; with a supply voltage of 24V DC 24V * 0.4A = 9.6W. If you want to use spotlights with powerful LEDs and a driver stabilizing the current for each fixture, then consider that such drivers do not work well with PWM modulation of the brightness of the fixtures. These drivers do not provide a smooth brightness change in 128 steps, which the controller provides and switching on comes in jumps of 5-6 steps. As a result, you will turn on the steps by blinking, and you will not succeed in achieving smoothness. It is better to use luminaires with several SMD LEDs and resistors without a power driver, which work well with PWM brightness control. For how certain lamps work with PWM, consult their seller or manufacturer. - I want to use LED stripes. What type and length can I connect to one step. Data on the possibility of using different LED stripes, see the table: LED Type (LED CHIP) Number of LEDs per 1 meter Supply voltage of LED strip Power consumption per 1 meter of LED strip (W / m) Current strength per 1 meter of LED strip Maximum allowable length of LED strip for one step SMD 3528 60 12 V DC 4.8 W/m 0.4A 1 m (3'3.37") SMD 3528 120 9.6 W/m 0.8A 0.5m (1'7.685") SMD 3528 60 24V DC 4.8 W/m 0.2A 2 m (6'6.74") SMD 3528 120 9.6 W/m 0.4A 1 m (3'3.37") SMD 5050 30 12V DC 7.2 W/m 0.6 A 70 cm (2'1.591") SMD 5050 60 14.4 W/m 1.2A 35 cm (1'1.78") SMD 5050 30 24V DC 7.2 W/m 0.3A 1.4m (4'3.181") SMD 5050 60 14.4 W/m 0.6A 70 cm (2'1.591") SMD 3014 120 12V DC 12 W/m 1A 40 cm (1'3.748") SMD 3014 240 24 W/m 2A 20 cm (7.874") SMD 3014 120 24V DC 12 W/m 0.5A 80 cm (2'7.496") SMD 3014 240 24 W/m 1A 40 cm (1'3.748") SMD 335 60 12V DC 4.8W/m 0.4A 1 m (3'3.37") SMD 335 60 24V DC 4.8W/m 0.2A 2 m (6'6.74") SMD 5630 60 12V DC 14.4 W/m 1.2A 35 cm (1'1.78") SMD 5630 60 24V DC 14.4 W/m 0.6A 65 cm (2'1.591") !!! LED stripes on SMD2835 - Not recommended for use. (The reason is that SMD2835 LEDs have a power of 0.2, 0.5, 1W

⚔️ Morrigan statue ⚔️ I do my things in my little studio. This is completely handmade, so IT TAKES ABOUT 3-5 DAYS. I do not make my goddesses on the machine, but cut them out of a piece of wood with my hands. I also carve symbols manually. So I don’t have two identical things. THE GODDESS YOU BUY MAY BE SLIGHTLY DIFFERENT FROM THE ONE YOU SEE IN THE PHOTO. It may vary slightly in color, for example. This is the magic of handmade things - they are one of a kind and made especially for you! ⚔️ Dimensions: height – 12 cm (4.72 in) width – 8 cm (3.15 in) thickness - 2 cm (0.79 in) ⚔️ Buy DIGITAL postcard with Brigid: https://etsy.me/3nrH5x1 ⚔️ Buy other Goddess: https://etsy.me/3928dwV ⚔️ Buy Gods: https://etsy.me/2ZB5NSQ ⚔️ Buy altar cloth: https://etsy.me/32rKTr8 To see more figures, please feel free to visit my shop: https://etsy.me/2HAK4Bq This item will be shipped to the address listed on Etsy, so if you want them to be sent to the different address, please leave the message at the checkout or send a convo. If you have any questions, please send me a message. Thank you! :)

SET of Cernunnos and Triple moon goddess. Video with Cernunnos https://youtu.be/tnxIT3Jwg7g and https://youtu.be/IE-yP98UnFc ???? Buy only Cernunnos: https://etsy.me/2B6Q0BD ???? Buy only Goddess: https://etsy.me/39f8ixr ???? I do my things in my little studio. This is completely handmade. I do not make my gods on the machine, but cut them out of a piece of wood with my hands. I also carve symbols manually. So I don’t have two identical things. THE GOD YOU BUY MAY BE SLIGHTLY DIFFERENT FROM THE ONE YOU SEE IN THE PHOTO. It may vary slightly in color, for example. This is the magic of handmade things - they are one of a kind and made especially for you! ???? Dimensions of each: height – 12 cm (4.72 in) width – 8 cm (3.15 in) thickness - 4 cm (1.58 in) To see more figures, please feel free to visit my shop: https://etsy.me/2HAK4Bq This item will be shipped to the address listed on Etsy, so if you want them to be sent to the different address, please leave the message at the checkout or send a convo. If you have any questions, please send me a message. Thank you! :)