Outdoor & Gardening

Vintage copper,metal door knobs for home decor, through pair, set.  Made in Soviet times.  Condition is good vintage, in places there are traces of oxidation, corrosion from age.  Material: metal.  Dimensions:  Base 10 x 7 cm (4,1 x 3 inches),  Diameter of the handle itself 4.5 cm (1.8"). 2 attachment holes.  Set weight 180 grams - 6.4 oz. Within 2-3 business days, your artwork will be carefully packed and sent. Transit time for orders worldwide is from 7 to 35 days. For any questions, write me a private message. Due to the peculiarities of customs in different countries, the parcel may take longer than usual. Additional goods upon delivery are considered to be goods from a similar category. When combining parcels, oversized goods are paid at the higher cost of the selected item; I will first combine, coordinate and give you the full shipping cost. I always try to keep it to a minimum. Thanks for understanding. Please enter your valid contact number and email address when ordering, because in this contact form you may be contacted by your country's customs department to deliver your order. If they can't contact you, they will send the package back. And in such a situation, the responsibility will lie with the Buyer.

ransparent glass vintage glass door knobs for home decor. Made in Soviet era. Good vintage condition, there are micro chips on the very top surface, photo attached, does not affect the functionality, no danger. Material: glass and metal Dimensions: 8 x 4.5 cm (3.15" x 1.8") base, diameter of the handle itself 6 cm (2.4"). 4 holes for fixing. weight of one handle 270 grams - 9.5 oz. Within 2-3 business days, your artwork will be carefully packed and sent. Transit time for orders worldwide is from 7 to 35 days. For any questions, write me a private message. Due to the peculiarities of customs in different countries, the parcel may take longer than usual. Additional goods upon delivery are considered to be goods from a similar category. When combining parcels, oversized goods are paid at the higher cost of the selected item; I will first combine, coordinate and give you the full shipping cost. I always try to keep it to a minimum. Thanks for understanding. Please enter your valid contact number and email address when ordering, because in this contact form you may be contacted by your country's customs department to deliver your order. If they can't contact you, they will send the package back. And in such a situation, the responsibility will lie with the Buyer.

Crochet mini Graduation cap. Crochet Pattern PDF. No sew pattern begginer friendly. A very quick and easy project! You can make this mini Graduation cap for gift for graduation, Congrats end of school celebration, graduation party decoration or favor, keychain for memory about graduation, mini crochet hat accessory for amigurimi. Size 1 1/2 x 1 1/2” (4 x 4 cm.). Skill Level - Easy – Beginner Friendly This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, half double crochet, double crochet, increase. Pattern is in standard American terms. You can use the same pattern to make larger or smaller by using finer or bulkier yarn. You will need: - cotton blend yarn ( YarnArt Jeans), any yarn 4ply - hook B (2 mm.) - scissors, needle Disclaimer: This is PDF Crochet Pattern to make a cowboy hat. NOT the actual finished item. There will be no refunds for failure to read the listing description, this listing is clearly for a crochet pattern. Happy crocheting! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

BBQ, mangal, hibachi grill 

Mini chimney base with screwdriver.

Rubber bands to secure your awning quickly.

Basket and grates for pellet burner

Folding Garden Knife USSR Vintage Soviet Original Collectible Knive Rare Old, Folding Garden Knife, Garden Knife, USSR Knife, Knive Material: metal plastic etc.. Condition and defects: there are scuffs, scratches, stains, traces of time, rust Folded length 11cm Unfolded length 18 cm For a better assessment, see the photo, consider your choice before buying, write for more information, I will be glad to answer Please note: - All vintage items sold in As-Is condition. - All vintage items sold in an unmodified form, we do not decorate or remodel items. - We try to make the most truthful photos, but real colors may slightly differ from their appearance on your display. - All photos are real - Your order will be packaged carefully to ensure it gets to you in perfect condition. - Usually shipping out from Ukraine takes 10-35 days. Our store works and complies with all the guarantees and rules of this trading platform. You can find and see many rare, vintage and antique items in our store. follow the link, we are always glad to see you. https://www.etsy.com/shop/AntiqueUkraineVintag [O]

Introducing our exquisite ceramic flower pot - the perfect combination of functionality and aesthetic appeal. Crafted with precision and care, this flower pot is designed to enhance the beauty of your indoor or outdoor space while providing a nurturing environment for your favorite plants. Crafted from high-quality ceramic, the pot has a smooth glazed finish that not only adds a touch of sophistication, but also ensures durability and resistance to the elements. Its elegant, timeless design blends perfectly with any decor style, making it a versatile choice for your home, office or garden. The flower pot is medium in size: height 7.08 inches, diameter 5.9 inches. Equipped with a suitable drainage hole, the flower pot promotes optimal plant health by preventing soil over-wetting. This thoughtful feature ensures that your plants receive the right amount of moisture, contributing to a thriving and vibrant garden. Bring nature indoors or create an inviting outdoor oasis with a flower pot – where functionality meets elegance and your botanical aspirations come to life in style.

Electrical cord for greenhouse

This piece of art is an original vintage ceramic planter in the shape of the head of an African leader. This unique African king was handcrafted in Ukraine in the 1990s from ceramic, coated with colored glaze, and fired in a high-temperature kiln. The photos are part of the description. This planter will serve as an ideal interior decoration for your home or office window sill, work desk, shelf, bedroom, kitchen, or winter garden. It can be used as a vase for flowers, a planter for real or artificial plants, flowers, and succulents. Please note that there is no drainage hole at the bottom to remove excess moisture. ******The set measures****** height - 15" (37 cm) width - 10,63" (27 cm) volume - 67 fl oz (2000ml) ********** Please note ********** ~~~ Please, consider the fact that the color and shade may a little vary from the finished product that you see on the monitor, because monitor color settings are different ~~~ All photos are real ~~~ All vintage and antique items are sold as they are. ~~~ If the item has been repaired or restored, then this information is reflected in the product description. ~~~ Your order will be carefully packaged for delivery. Please ask all questions and whatever you want to ask before buying. I will be happy to answer all your questions. Happy shopping!

Lying Deckchair, camping chair

- file for cutting

CLAY POT For Flowers USSR, Flower Pot, Vintage Clay Pot, Soviet Pot, Clay Pot Material: CLAY Condition and defects: scuffs, stains, scratches, small chips and cracks top diameter 19.3 cm Height 17.5 cm For a better assessment, see the photo, consider your choice before buying, write for more information, I will be glad to answer Complete set of goods as in the photo, you buy what you see in the photo. Please note: - All vintage items sold in As-Is condition. - All vintage items sold in an unmodified form, we do not decorate or remodel items. - We try to make the most truthful photos, but real colors may slightly differ from their appearance on your display. - All photos are real - Your order will be packaged carefully to ensure it gets to you in perfect condition. - Usually shipping out from Ukraine takes 10-35 days. Our store works and complies with all the guarantees and rules of this trading platform. You can find and see many rare, vintage and antique items in our store. follow the link, we are always glad to see you. https://www.etsy.com/shop/AntiqueUkraineVintag (O)

Romantic Metal Wall Decor ‘Kissing Better Than Cooking’ with red Hearts – 5-Piece Wall Art Set for Indoor and Outdoor Decoration  • The modern style wall art is designed to trigger smiles and serve as romantic bedroom décor, funny kitchen wall sculptures, comforting living room décor, unique decoration for café walls, or even stunning outdoor wall accents.   • The metal wall art includes 3 red hearts and 4 words of black color styled in large font to be readable from a great distance. The room décor comes in separate pieces, which can be placed as you like to fit into any space.   • The home décor is made of durable steel, laser cut for superb accuracy, and covered with anti-corrosion and weather-resistant powder coating to work fine for bathroom décor, kitchen wall décor, and outdoor application.    • The metal wall décor is easy to mount with plastic dowels and metal screws, which are included in the set and ensure secure mounting to any surface both inside and outside your house. • The love-themed wall sculptures are packed into a stylish gift box to give you a ready-made creative solution for a birthday, New Year, Christmas, housewarming, Valentine's Day, and other occasions.      Are you looking for a way to add a bang-on focal point to the empty walls of your house? Do you need a creative idea for your café interior design? Or you are just surfing the Web for a unique gift that will wow your loved ones? Whichever reason is yours, we have a wonderful solution — the ‘Kissing Better Than Cooking’ wall art.     The love-inspired words are just the thing to bring fun, warm-heartedness, and good vibes into homes or public spaces designed for socializing. The romantic touch makes it a perfect fit for living room or bedroom décor, for example, as an over bed wall accent, while a cook in you will find it amusing to see this sign in café or kitchen décor. The beautifully shaped words look stunning and add personality to any space.     The metal wall art is made of durable and lightweight steel with the help of the latest laser-cutting equipment to provide unbeatable accuracy and a highly aesthetic appearance. The high-quality powder coating is long-lasting, safe, and approved for both indoor and outdoor use. The home décor won’t accidentally break, deform, or fade with time. You will be able to mount the wall décor inside or outside your house in no time with reliable plastic dowels and metal screws included in the set. The mounting accessories allow secure hanging on any surface. You can also stick the wall decor on the wall (glue or tape is not included).     ++++Perfectly-Sized+++++ The metal wall décor is large enough to be clearly visible from any spot in your room or even from the street.   Dimensions: • Kissing — 41.3 x 9.4 cm/16.1 x 3.7 inches • cooking — 42.0 x 7 cm/16.5 x 2.8 inches  • better — 33.5 x 7.0 cm/13.2 x 2.8 inches  • than — 25.0 x 7.0 cm/9.8 x 2.8 inches  • hearts — 11.5 x 10.5 cm/4.5 x 4.1 inches Please note that there may be slight variances in the size. Versatile Thanks to the modern-style font and black main color scheme, the room décor blends with many interior designs, but you are free to add colors with the red hearts attached. The anti-corrosive coating ensures that the metal sign will retain its look for a long time, even if used as a bathroom wall décor or outdoor decoration. As the home décor consists of 7 separate pieces, you are welcome to arrange them in lines, stacked, stepwise, or whatever you like to fit into available space and create a design you’ll be happy with. The wall art set comes in gift-ready packaging perfect for a birthday, housewarming, anniversary, Valentine's Day, New Year, or Christmas.  Box size: 44.0 x 11.5 x 3.5 cm/17.3 x 4.5 x 1.4 inches  **************Warning! ***************  The actual color of the product may differ slightly from the image on the site, which is caused by many factors. such as brightness of your monitor and light brightness. And also the manufacturer of paint of the same color in different batches of paint may also differ slightly. If you want to check the selected color, write to me, I will try to help you and send a video of the selected product to your mail for a better understanding of the color. >> By purchasing you agree that WonderDesign is not responsible for any damage to walls, drywall or items due to improper use or installation. We always recommend consulting a professional installer if you are unsure how to mount them or if they are installed correctly.

A modern style clothes rack will be a real decoration for any corner of your home. Coat rack is perfect for the hallway, living room, bedroom, it can even be hung outdoors, as it is made of stainless steel and painted with high-quality powder paint. In the center of the hanger there are butterflies, which are also hooks. This very durable metal hanger can be used for both accessories and outerwear. The coat rack attaches to the wall at a distance of 1 cm without taking up much space, and the hooks are branched at different angles, which allows you to arrange things conveniently on each hook. The coat rack is made to order. The time for making an order is 1-5 days. Price for 1 coat rack. Mounting accessories included. Size: Width: 19 cm (7.5 in) Height: 40 cm (16 in) Depth: 9 cm ( 3.5 in) Material: Metal ( Stainless steel ) Colors: gold Hangers are handmade, there may be slight size difference. ***********************Warning! ***************************** The coat rack is made to order. The time for making an order is 1-5 days. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as the brightness of your monitor and light brightness. And also the paint manufacturer the same color in different batches of paint may also be slightly different. If you want to verify the chosen color, write to me, I will send a video of the selected product to your email for a better understanding of the color. ******************Shipping details************************** >> If you plan to order two or more items, please contact me, I will recalculate the shipping cost as much as possible, depending on the weight and size of the order. :) Please feel free to contact me with questions . >> All the orders will be shipped to the shipping address supplied through your Order. Please check the accuracy of the address before your order finalization. >> By purchasing you agree that WonderDesign is not responsible for any damage to walls, drywall or items due to improper use or installation. We always recommend consulting a professional installer if you are unsure how to mount them or if they are installed correctly.

The Modern coat rack "Butterfly" with butterflies and branch-like hooks is made in a stunningly beautiful style and will decorate any corner of your home, for livingroom, kitchen, kids room, badroom, everywhere. Clothers rack will also be a great addition to the interior of your home, beauty salon, coffee shop, restaurant. The hanger is made of durable stainless steel, butterfly and branch-shaped hooks, and in the center is decorated with two butterflies, which are also hooks. The coat rack attaches to the wall at a distance of 1 cm without taking up much space, and the hooks are branched at different angles, which allows you to arrange things conveniently on each hook. You can hang both accessories, handbags and outerwear on hooks, they are very durable and functional. The wall hanger is available in gold color. Price for 1 coat rack. The produduct is made to order. The time for making an order is 1-5 days. The hanger can be used both indoors and outdoors. Made from stainless steel and powder coated. Mounting accessories included. *******Size & Materials ******************* Width: 19 cm (7.5 in) Height: 40 cm (16 in) Depth: 9 cm ( 3.5 in) Material: Metal ( Stainless steel ) Colors: gold  ***********************Warning! ***************************** The produduct is made to order. The time for making an order is 1-5 days. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as the brightness of your monitor and light brightness. And also the paint manufacturer the same color in different batches of paint may also be slightly different. ******************Shipping details************************** >> If you plan to order two or more items, please contact me, I will recalculate the shipping cost as much as possible, depending on the weight and size of the order. :) Please feel free to contact me with questions . >> All the orders will be shipped to the shipping address supplied through your Order. Please check the accuracy of the address before your order finalization. >> If you need your order delivered more quickly? We offer express shipping too! Please get in touch with a question. I will count how much it costs. >> By purchasing you agree that WonderDesign is not responsible for any damage to walls, drywall or items due to improper use or installation. We always recommend consulting a professional installer if you are unsure how to mount them or if they are installed correctly. >> Attention! Some countries will charge duty for international packages, and these countries have different rates! Most packages go through without any charges, but please be advised that we have no control over how your country charges duty.

Souvenir "Flag in a jar"

Stihl MS 361 Original Chainsaw

Handmade Flowerpot, Ceramic Flowerpot, Hand Painted Flowerpot, Pot with a Pattern, Gift to the House, Home Decor, Pot for Flower, for Plants Dimensions: Top diameter-7 cm= 2,7" Bottom diameter-4,5 cm= 1,7" Height-7 cm= 2,7" Width-8 cm= 3,1" The material is ceramic. The top is hand-painted with acrylics. Suitable for any plants and succulents. Wonderful and colorful home decor.

ECOTOUGE Glass Fire Pit Rocks (0.9”, 10lb) for Propane Fire Pit, High Luster Reflective Fire Glass Beads, Safe Gas Fire Pit Glass Rocks for Natural (Pure) Description Features: ECO-Material:Glass beads are made of tempered glass, which can be used for a long time, will not degrade, also has strong corrosion resistance, heat resistance, faded resistant and insulation function, give us a safe dazzling visual feast. Reliable QualityReflective glass beads can be burned in the fire, and its combustion temperature is as high as 3000F and the burning glass bead is shining as diamonds, does not melt or degrade, burns cleanly, ashless, smokeless, does not produce toxic gases and dust. Easy to Clean:Glass beads is smooth and mellow, easy to clean and don't worry to hurt your hands when cleaning, occasionally with water and vinegar to leave them sparkling like new. Widely Application:Suitable for fire pit table, fireproof glass of propane gas, natural gas, decorating indoor fireplaces, outdoor fire bowls and fish tanks. And also be used for vase filling, aisles, water features, replaces existing gas logs & lava rocks. The Service You Want:We can provide everything you want, 24-hour online customer service, free to answer any questions for you, if you have any dissatisfied with us, please feel free to contact us, we will eventually supply you a perfect solution. Product Details: Package Dimensions: 10.04 x 6.26 x 6.26 inches Item Weight: 10.52 pounds Manufacturer: ECOTOUGE Handling We will ship all orders within 3 business days of payment. Delivery We do not ship outside of the Continental US. Feedback We take our reputation seriously, we buy and sell online, so we understand the value of trust. If you are unsatisfied with your order, please contact us and we will work with you to resolve it to your satisfaction.

Lifyzoon Swivel Bird Feeder Hanger Hook: Swivel Hanging Plant Bracket Outdoor - Wall Mount Swivel Hanging Hook for Bird Feeder 12-Inch Description Features: Swivel Plant Bracket: 16" curved hanging plant bracket, equipped with 8 gear rotary fixation. Rotate the swivel plant hook up to 180 degrees depending on the position. Hand-forged Plant Bracket: The swivel plant bracket is hand-forged from solid iron by an experienced ironsmith. The black matte powder-coated finish guarantees plant hanger waterproof, rust-proof, and sun-proof. Great Weight Capacity: The swivel hook is sturdy and stable for hanging up to 35lbs of plants, flower baskets, bird feeders, lanterns, bells, and windchimes. The 8 gear rotary fixation strengthens the stability of the bird feed hanger and prevents it from random swaying in bad weather. Bird Feeder for Outside: The swivel bird feeder bracket works well indoors or outdoors and can be mounted on deck, wall, wood, fences. Easy Wall Mounted: All corresponding screws and expansion screws are included. First fix the base on the wall with screws, and then insert the bracket to complete the installation. Product Details: Color: ‎Black Brand: ‎Lifyzoon Material: ‎Wood, Iron Finish Type: ‎Matte Mounting Type: ‎Wall Mount Style: ‎Decorative Weight Limit: ‎35 Pounds Special Feature: ‎Heavy Duty, Rust Resistant Minimum Weight Capacity: ‎35 Pounds Maximum Weight Recommendation: ‎35 Pounds Manufacturer: ‎JIESHUO ART Item Weight: ‎14.4 ounces Package Dimensions: ‎14.1 x 5.7 x 1.5 inches Size: ‎12 Inch Finish: ‎Matte Maximum Weight Capacity: ‎35 Pounds Special Features: ‎Heavy Duty, Rust Resistant Batteries Included?: ‎No Batteries Required?: ‎No Date First Available: August 4, 2020 Handling We will ship all orders within 3 business days of payment. Delivery We do not ship outside of the Continental US. Feedback We take our reputation seriously, we buy and sell online, so we understand the value of trust. If you are unsatisfied with your order, please contact us and we will work with you to resolve it to your satisfaction.

Mushroom keychain charm crochet pattern PDF. These cute small mushroom keychains will be a cute small gift for kids and adults. It can be used as keychain or bag / backpack charm, as mushroom garland for home or party decoration. !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! Size – Approximately 2 1/3” (6 cm.) This pattern is suitable for those who have crochet skills for intermediate and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description and pictures. Pattern consists of 2 pages. It also has Crochet Techniques of Invisible decrease and Invisible join. You will need: - cotton or cotton blend yarn ( YarnArt Jeans) or any yarn 4 ply. - hook B (2 mm.) - polyester fiberfill - needle, scissors - metal keychain You are free to sell the finished item made from this pattern. PATTERN CAN"T BE SOLD!!! Happy crocheting!!! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Skull Trio crochet pattern PDF. 3 in 1 Amigurumi Skull keychins Halloween pattern. !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! An exciting spooky project for Halloween! These skull keychains will be a cute Halloween small gift for kids, adults. It can be used as hanging decor, as a garland on the wall, as outside decoration in the garden for Halloween party. Size – Approximately 2” (5cm.). This pattern is suitable for those who have crochet skills for intermediate and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description and pictures. Pattern consists of 4 pages, each skull on a separate page. So this will be handy if you need to do only one design. You will need: - cotton or cotton blend yarn ( YarnArt Jeans) or any yarn 4 ply. - hook B (2 mm.) - polyester fiberfill - needle, scissors - metal keychain You are free to sell the finished item made from this pattern. PATTERN CAN"T BE SOLD!!! Happy crocheting!!! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Crochet Lilly of the Valley charm, pattern PDF. These lovely lilies of the valley you can crochet in different colors. They can be used as car mirror hanging, bag charm, backpack charm, cute flowers keepsake, Birthday gift handmade. !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! This pattern is suitable for those who have crochet skills and know the magic ring, single crochet, half double crochet, double crochet, increase. Pattern is in standard American terms. The pdf file contains a step-by-step description on 3 pages Also description of techniques invisible join and invisible decrease. Approximately Flower – 1 ½” (3 cm.), Charm long 9 ½” (24 cm.). You will need: - cotton or cotton blend yarn ( Alize Cotton Gold), 4ply. - hook B (2 mm.) - needle, scissors You are free to sell the finished item made from this pattern. PATTERN CAN"T BE SOLD!!! Happy crocheting!!! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Crochet Daisy flowers 2 sizes, pattern PDF. These lovely crochet daisy flowers perfect for home decoration all year round, it can be used in a baby room, living room, or fireplace, as a garland on the wall, as outside decoration in the garden. It can be used for baby showers, wedding decor or party decor. This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, increase decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description. Approximately sizes of flowers 2 1/3” (6 cm.) and 1 3/4" (4,5 cm.) in diameter. You will need: - cotton or cotton blend yarn ( YarnArt Jeans), 4ply. - hook B (2 mm.) - needle, scissors You are free to sell the finished item made from this pattern. PATTERN CAN"T BE SOLD!!! Happy crocheting!!! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

we can make in the color you need - for this, before ordering, write us a message The planter can be used as a podium for product photos. it is intended for dried flowers, pencils, toothbrushes, makeup brushes or for planting succulents that do not require heavy watering. We saturate it a little with water-repellent impregnation and impregnation to protect it from dust. you can stick the silicone feet on the bottom yourself _________________________ made with love handcrafted from plaster with a hardener additive more products can be viewed in my store or instagram ___________________________ Each piece is handcrafted to order - small holes due to air bubbles or slight variations in color are natural and unique characteristics. _________ if you have a question, be sure to ask me before clicking the checkout button _________ The transfer of real color may differ due to different electronic devices, so the photos on the site are for information only. Each product is unique and inimita ble. May contain holes in itself due to the nature of the materials from which it is made. _________________ Product manufacturing time min. 1- max. 5 working days, each product bears the betonvton logo and is treated with water-repellent and dust-proof impregnation. All products are designed for use only on the front of the product (where there is no logo) Product material: reinforced with mineral additives gypsum or concrete to order.

Lilly of the valley car accessory. Crochet white lilly of the valley. Crochet plants, White flowers handmade decoration. Use as car mirror hanging, bag / backpack charm, home or outdoor decor. He is the perfect car accessory gift for Birhday, Valentines day, Easter, Christmas or any occations. Lilly of the valley charm size approx. 9 1/2" (24 cm.) Item made with cotton yarn. Hand made with love.

Lilly of the valley car accessory. Crochet yellow lilly of the valley. Crochet plants, yellow flowers handmade decoration. Use as car mirror hanging, bag / backpack charm, home or outdoor decor. He is the perfect car accessory gift for Birhday, Valentines day, Easter, Christmas or any occations. Lilly of the valley charm size approx. 9 1/2" (24 cm.) Item made with cotton yarn. Hand made with love.

Crochet mini Chef hat and knife pattern. Crochet Pattern PDF. Crochet mini hat for dolls, amigurumis, aplique, scrapbooking etc Size approx. Hat 1 ½” (4 cm.) tall and 2” (5 cm.) in diametr, Knife 1 ½”(4 cm.) This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. This PDF file has 3 pages with with descriptions and pictures of a chef hat and two knives (one color and two colors). It also has Crochet Techniques of Triple invisible decrease and Invisible join. You will need: - cotton blend yarn ( YarnArt Jeans), any yarn 4ply - hook B (2 mm.) - scissors, needle Disclaimer: This is PDF Crochet Pattern to make a cowboy hat. NOT the actual finished item. There will be no refunds for failure to read the listing description, this listing is clearly for a crochet pattern. Happy crocheting! Kind regards, @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Crochet Rainbow Heart, Crochet Pattern PDF. Amigurumi Rainbow heart keychain, Rainbow heart ornament, Pride month crochet heart. A cute gift for someone you love do it yourself. This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, Increase, Decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description. Also description and photo of invisible join and invisible decrease. Size approximately 2" (5,5 cm.) You will need: - cotton blend yarn ( YarnArt Jeans) or any 4 ply - hook B(2 mm.) - polyester fiberfill - metal key chain - needle, scissors You are free to sell the finished item made from this pattern. PATTERN CAN"T BE SOLD!!! Happy crocheting!!! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Crochet Cupcake Ladybug with fruit, pattern PDF. !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! A very quick and easy crochet project! These lovely Bee cupcake will be a cute Bee patty decor, Baby shower, Decor for your home, a great handmade gift for kids. This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description. Size approx. 3 1/5" (8 cm.). You will need: - cotton or cotton blend yarn ( YarnArt Jeans), 4ply. - hook B (2 mm.) - polyester fiberfill - needle, scissors Happy crocheting! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Handmade fastening set

Crochet Cupcake with bunny ears, pattern PDF. !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! A very quick and easy Easter Project! These lovely Easter cupcake will be a cute Easter, Baby shower, Bunny patty decor for your home, a great handmade gift for kids. This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description. Size approx. 3 1/5" (8 cm.). You will need: - cotton or cotton blend yarn ( YarnArt Jeans), 4ply. - hook B (2 mm.) - polyester fiberfill - needle, scissors Happy crocheting! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Crochet Cupcake with Bee wings and fruit, pattern PDF. !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! A very quick and easy crochet project! These lovely Bee cupcake will be a cute Bee patty decor, Baby shower, Decor for your home, a great handmade gift for kids. This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description. Size approx. 3 1/5" (8 cm.). You will need: - cotton or cotton blend yarn ( YarnArt Jeans), 4ply. - hook B (2 mm.) - polyester fiberfill - needle, scissors Happy crocheting! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Crochet mini Cowboy hat pattern Crochet Pattern PDF. A very quick and easy project! Suitable for amigurumi toys for Birthday party. Size approx. Hat 2” (5 cm.) in diametr. This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, increase. Pattern is in standard American terms. You will need: - cotton blend yarn ( YarnArt Jeans), any yarn 4ply - hook B (2 mm.) - scissors, needle Disclaimer: This is PDF Crochet Pattern to make a cowboy hat. NOT the actual finished item. There will be no refunds for failure to read the listing description, this listing is clearly for a crochet pattern. Happy crocheting! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Походная твердотопливная горелка с естественной конвекцией воздуха.                                                                                                                                                                                        Горелка, или как ее еще называют, печка – щепочница "Airwood Solo-bh BM", была разработана специально для любителей соло или парных походов. То есть была задача достичь максимальной надежности и эффективности горелки при небольшом весе. После длительных тестирований и экспериментов по  улучшению устойчивости горения, этот продукт приобрел нынешний вид и конструкцию!     При горении дров в обычных условиях (в костре) образуется дым, в котором находится около 90% горючих, но не сгоревших от недостатка кислорода частиц (древесный газ). Благодаря двустенной конструкции, данная горелка имеет КПД сгорания топлива в разы выше, чем у обычного костра, и позволяет сжигать этот древесный газ.     Через боковые отверстия в нижней части корпуса свежий воздух попадает внутрь горелки, после чего одна часть воздуха подсасывается в нижнюю часть и дно камеры сгорания, где на решетке лежат дрова. Другая же порция воздуха, под действием конвекции, устремляется вверх - между стенками камеры сгорания и корпуса, где прогреваясь выходит через специальные отверстия и попадает в верхнюю часть камеры сгорания горелки, обеспечивая воспламенение древесного газа.  Там, где выходит воздух, образуются языки интенсивного пламени вследствие обогащения прогретым кислородом.     Итак, – меньше дыма и больше чистого пламени!     Благодаря такому эффекту, а также минимальной площади соприкосновения камеры сгорания с корпусом, - горелка дает мощный нагрев, быстро доводит до кипения емкость с водой и позволяет приготовить пищу (суп, кашу, чай и тп.).   В качестве дров можно использовать ветки, щепки, шишки хвойных деревьев и любое другое подручное сухое твердое топливо, кроме древесного или каменного угля, так как в горелке для приготовления пищи используется пламя, а не жар.     Горелка предназначена для приготовления пищи в посуде объемом до 2-х литров, и лучше всего подойдет для одного-двух человек.   Раскладная подставка для посуды диаметром 14см (в разложенном состоянии) обеспечит удобное размещение посуды с широким дном (кастрюлька или сковорода).          Версия горелки "Airwood Solo-М-bh BM" стала продолжением модели "Airwood Solo-М BM" и отличается от предшественницы наличием днища в корпусе и съемной ручки-держателя горелки.   Благодаря ручке-держателю можно изменить положение (поправить) или перенести горелку во время ее работы (горения). Такая возможность пригодится в случае внезапного изменения погоды – можно быстро и безопасно перенести горелку в более защищенное место в случае внезапного дождя или порывов ветра.     Днище в корпусе повышает безопасность использования горелки, ведь препятствует попаданию горящих углей из камеры сгорания на поверхность, на которую установлена горелка.         Характеристики: ✔ Время закипания воды объемом 1 л: от 7 минут, в зависимости от качества топлива и условий окружающей среды; ✔ Материал: нержавеющая сталь разной толщины (0,3 мм-0,8 мм); ✔ Ресурс камеры сгорания: от 300 до 800 и более часов работы печки в зависимости от условий хранения и эксплуатации; ✔ Объем камеры сгорания: 690мл; ✔ Размеры камеры сгорания: внутренний диаметр 9,5 см, глубина 10,2 см; ✔ Габаритные размеры:    ● в сложенном для транспортировки состоянии: высота 12 см, диаметр 12 см;    ● при использовании: высота 16 см, диаметр от 12 см до 16 см; ✔ Суммарный вес горелки (с раскладной подставкой для посуды, ручкой-держателем, чехлом) – 340 грамм.     Комплектация:   ✔ корпус горелки в сборе с камерой сгорания и днищем;   ✔ раскладная подставка для посуды из нержавеющей стали толщиной 0,8 мм;   ✔ съемная ручка-держатель;   ✔ чехол из легкой водонепроницаемой ткани;   ✔ рекомендации по использованию.           Как и все производители, мы оставляем за собой право вносить изменения во внешний вид и геометрию узлов нашей продукции для улучшения ее эксплуатационных характеристик. Поэтому полученный Вами продукт может отличаться от представленного на фотографиях нашего сайта или в обзорах наших клиентов или партнеров, но это означает, что Вы владеете более новой и улучшенной версией данной модели.      Также обращаем Ваше внимание на то, что Мы не несем ответственности за достаточно свободные интерпретации характеристик или принципа действия наших печей, если они не размещены на нашем сайте в описании наших продуктов потому, что мы не имеем влияния на авторов этих интерпретаций.    

Самый легкий среди турбо-горелок серии "Airwood...BM" с блоком принудительной подачи воздуха, который питается от любого внешнего источника напряжения 3-6 В, имеющего выход USB или DC.                                                                                                                                                             Горелка предназначена для приготовления пищи (супа, каши, чая и т.д.) объемом до 3-4 литров. В качестве топлива используются ветки, щепки, опилки и любое другое подручное твердое топливо.      Благодаря блоку принудительной подачи воздуха горелка обеспечивает мощный нагрев даже при использовании сырых дров и очень быстро доводит объем с водой до кипения.     Время закипания 1 литра воды составляет от 5 минут, в зависимости от качества топлива и условий окружающей среды.     Горелка имеет КПД сгорания топлива до 80%, в отличие от 5-7% КПД обычного костра. Это связано с тем, что в дыму от дров находится около 90% частиц, которые не сгорели из-за нехватки кислорода. При подаче свежего воздуха в определенные места камеры сгорания горелки, эти мелкие частицы сгорают. Именно на таком принципе и построена данная горелка: холодный воздух из блока нагнетания поступает в боковое отверстие нижней части внешней стенки корпуса горелки. Под действием вентилятора одна часть воздуха нагнетается в отверстия дна и нижней части камеры сгорания, а другая направляется вверх - между стенками камеры сгорания и корпуса, где, прогреваясь, выходит через специальные отверстия и поступает в верхнюю часть камеры сгорания, обеспечивая зажигание древесного газа.      Блок поддува камеры сгорания оборудован входным разъемом (гнездом) DC (5,5 мм * 2,1 мм)  с откидным ковриком-заглушкой для защиты разъема от загрязнения и переключателем со следующими режимами: 1) Верхнее положение - "Высокие обороты" - для моментального разжигания и кипячения воды, 2) Нижнее положение - "Малые обороты" - для поддержания высокотемпературного пламени.   Ток, потребляемый блоком нагнетания воздуха (в зависимости от напряжения источника питания): • в режиме "Высокие обороты": 70-100мА; • в режиме "Малые обороты": 20-50мА;             В блоке подачи воздуха установлен двигатель с экранированием от теплового излучения и пылевлагозащитой на уровне класса защиты IP55.  Это усовершенствование позволяет владельцу горелки использовать ее в условиях повышенной влажности или пыли (тропики, дождь, пустыня, пляж и т.д.) без опасений, что двигатель заклинет в самый неподходящий момент.           Горелка также работает и в режиме естественной тяги , для этого достаточно отсоединить блок поддува воздуха от корпуса горелки. Этот режим пригодится для приготовления блюд, которые не требуют сильного пламени, например - каши.          Горелка комплектуется складной подставкой для посуды. Этот узел горелки имеет повышенную огнестойкость и специально разработан для более надежного размещения на горелке круглых казанков (кастрюль) с широким дном. Но подставка понравится и любителям утреннего кофе на природе, приготовленного в турке (посуд с дном маленького диаметра), потому что благодаря откидным ножкам, на складной подставке будет "удобно", как посуде с диаметром дна 5 см, так и посуде с диаметром дна 25 см!         После раскрытия лапки фиксируются под небольшим углом до горизонта, обеспечивая надежное захватывание дна посуда, а при увеличении нагрузки лапки принимают горизонтальное положение, при этом верхняя часть полотна подставки по всему кругу слегка расходится наружу, увеличивая жесткость подставки и устойчивость посуды на ней.            Новая камера сгорания , установленная в горелке, значительно отличается от старой версии: изменены количество, диаметр и конфигурация отверстий впрыска воздуха. Эти изменения были внесены для повышения качества горения дров в нижней части камеры. Удалось устранить забивание (засорение) камеры тлеющим углем, а также улучшить горение сырых дров и таким образом максимально адаптировать палец к реальным походным условиям, где сухие дрова - редкость. Кроме того, в новой версии камеры  происходит стабильное горение топлива также и в режиме естественной тяги  (с отсоединенным от горелки блоком нагнетания) - эта возможность очень важна для приготовления блюд, которые не требуют интенсивного пламени.         Внешняя оболочка (корпус) горелки "Airwood USB-h BM" имеет закрытое днище , благодаря которому образуется закрытое пространство между двумя стенками горелки (между камерой сгорания и корпусом), то есть весь воздух из блока нагнетания (поддува) гарантированно поступает в камеру сгорания. Таким образом, нет необходимости искать плоскую поверхность для размещения горелки, потому что в таком варианте выполнения горелку можно использовать даже в подвешенном состоянии! Еще одним плюсом горелки с закрытым днищем корпуса является то, что  после ее использования на земле не остаются ожоги, как  после костра.         Для удаления пепла после использования (и остывания) горелки достаточно снять с горелки подставку для посуды и блок подачи воздуха, а затем высыпать пепел из камеры сгорания, перевернув горелку дном вверх. Остатки пепла, которые остались между камерой сгорания и корпусом, легко вытрясти через большое отверстие сбоку корпуса, к которому во время работы горелки подключается блок подачи воздуха.    В данной модели горелки корпус оснащен съемной ручкой-держателем , что позволяет изменить положение (исправить) или переместить горелку во время ее работы (горения). Такая возможность пригодится в случае резкого изменения погоды - можно быстро и безопасно переместить горелку в более защищенное место в случае резкого дождя или порывов ветра.    Характеристики: Материал металла: нержавеющая сталь разных марок и толщины (0,3 мм-0,8 мм); Камера сгорания: ресурс: от 300 до 800 и более часов работы горелки в зависимости от условий хранения и эксплуатации; объем 690 мл; Габаритные размеры: в упакованном состоянии: высота 12 см, диаметр 12 см; во время использования: высота 16 см, диаметр от 12 см до 16 см; Общий вес горелки вместе с чехлом, ручкой-держателем и кабелем USB-DC - 420 грамм.      Комплектация: корпус горелки в сборе с днищем и с камерой сгорания; усиленная жаростойкая складная подставка для посуды; блок нагнетания воздуха с переключателем скорости и разъемом (гнездом) DC (5,5 мм * 2,1 мм) с откидной крышкой-заглушкой для защиты разъема от засорения; съемная ручка-держатель горелки; кабель USB-DC; чехол из прочной водонепроницаемой ткани "Оксфорд"; рекомендации по использованию горелки.

Эта модель твердотопливной турбо-горелки специально создана для длительной эксплуатации в сложных условиях окружающей среды, а блок принудительной подачи воздуха запитывается от любого внешнего источника напряжения 3-6 В, имеющего выход USB.                                                                                                                                                                    Твердотопливная турбопечка "Airwood Heavy Duty USB-h BM" станет надежным спутником для путешественников, которые любят длительные походы (месяц и более) в морском, тропическом климате или в других агрессивных для изделий из металла условиях. Все соединения деталей подставки для посуды и камера сгорания выполнены из нержавеющей стали.  Все наиболее уязвимые узлы горелки изготовлены из нержавеющей стали повышенной коррозионной стойкости!  Блок принудительной подачи воздуха горелки "Airwood Heavy Duty USB-h BM" может питаться от Power Bank, модуля питания "Power Box BM", солнечной панели с встроенным аккумулятором, смартфона, подключенного через кабель OTG, или любого другого внешнего источника постоянного напряжения 3-6 В, который имеет на выходе разъем (гнездо) USB или штекер DC размером 5.5 мм x 2.1 мм.     Благодаря блоку подачи воздуха, горелка обеспечивает мощное нагревание даже при использовании сырых дров и быстро доводит емкость с водой до кипения. Время закипания 1 литра воды составляет от 5 минут в зависимости от качества топлива и условий окружающей среды.   Горелка имеет КПД сгорания топлива до 80% в отличие от 5-7% КПД обычного костра. Это связано с тем, что в дыму от дров находится около 90% частиц, которые не сгорели из-за нехватки кислорода. При нагнетании свежего воздуха в определенные места камеры сгорания горелки, эти мелкие частицы сгорают. Именно на таком принципе и построена данная горелка: холодный воздух из блока нагнетания попадает в боковое отверстие нижней части внешней стенки корпуса горелки. Под действием вентилятора одна часть воздуха нагнетается в отверстия дна и нижней части камеры сгорания, а другая направляется вверх - между стенками камеры сгорания и корпуса, где, прогреваясь, выходит через специальные отверстия и попадает в верхнюю часть камеры сгорания, обеспечивая возгорание древесного газа.    Там, где выходит воздух, образуются языки интенсивного пламени в результате обогащения кислородом.     На печке без усилий можно приготовить еду (суп, кашу, чай и т.д.) объемом до 3-4 литров.     В качестве топлива используются ветки, щепки, хворост и любое другое подручное твердое топливо.    Блок подачи воздуха (поддув)  в камеру сгорания оборудован входным разъемом (гнездом) DC (5,5 мм * 2,1 мм) с откидной крышкой-заглушкой для защиты разъема от загрязнения и переключателем со следующими режимами: 1) Верхнее положение - "Высокие обороты" - для мгновенного разогрева и кипячения воды, 2) Нижнее положение - "Малые обороты" - для поддержания высокотемпературного пламени. Ток, потребляемый блоком подачи (в зависимости от напряжения источника питания): • в режиме "Высокие обороты": 70-100 мА;   • в режиме "Малые обороты": 20-50 мА;     В блоке нагнетания воздуха установлен  двигатель с экранированием от теплового излучения и пыле-влаго изоляцией на уровне класса защиты IP55 . Данное усовершенствование позволяет владельцу горелки использовать ее в условиях повышенной влажности или загрязнения (тропики, дождь, пустыня, пляж и т.д.) без опасений, что двигатель остановится в самый неподходящий момент.   Горелка также работает в режиме естественной тяги, для этого достаточно отсоединить блок нагнетания воздуха от корпуса горелки. Этот режим пригодится для приготовления блюд, которые не требуют сильного пламени, например, каши.   Горелка комплектуется раздвижной подставкой для посуды. Этот узел горелки имеет повышенную огнестойкость и специально разработан для более надежного размещения на печке круглых казанков (кастрюль) с широким дном. Но подставка понравится и любителям утреннего кофе на природе, приготовленного в турке (посуда с дном маленького диаметра), потому что благодаря откидным ножкам на раскладной подставке будет "удобно" как для посуды с диаметром дна 5 см, так и для посуды с диаметром дна 25 см!  После раскрытия лапки фиксируются под небольшим углом до горизонта, обеспечивая надежное захватывание дна посуды, а при увеличении нагрузки лапки принимают горизонтальное положение, при этом верхняя часть подставки по всему кругу слегка расходится наружу, увеличивая жесткость подставки и устойчивость посуды на ней.  Новая камера сгорания, установленная в горелке, значительно отличается от старой версии: изменены количество, диаметр и конфигурация отверстий впрыска воздуха. Эти изменения были внесены для повышения качества горения дров в нижней части камеры. Удалось устранить забивание (засорение) камеры тлеющим углем, а также улучшить горение сырых дров и таким образом максимально адаптировать горелку к реальным походным условиям, где сухие дрова - редкость. Кроме того, в новой версии камеры происходит стабильное горение топлива в режиме естественной тяги (с отсоединенным от печки блоком нагнетания) – эта возможность очень важна для приготовления блюд, которые не требуют интенсивного пламени.      В данной модели горелки  камера сгорания имеет  более толстые стенки и увеличенный объем  по сравнению с камерой классических турбо-горелок серии "Airwood BM".  Все элементы камеры изготовлены из нержавеющей стали повышенной коррозионной стойкости.  Камера сгорания выполнена в жесткой сборке (винтовое соединение) с корпусом, который имеет стандартные для турбо-горелок серии "Airwood BM" размеры.       Внешний корпус горелки "Airwood Heavy Duty USB-h BM" имеет закрытое дно, благодаря которому образуется закрытое пространство между двумя стенками горелки (между камерой горения и корпусом), то есть вся подача воздуха из блока нагнетания гарантированно поступает в камеру горения. Таким образом, нет необходимости искать плоскую поверхность для размещения горелки, потому что в таком варианте исполнения горелку можно использовать даже в подвешенном состоянии! Еще одним плюсом горелки с закрытым дном является то, что после его использования на земле не остаются ожоги, как после костра. Дно в данной модели изготовлено из нержавеющей стали повышенной коррозионной стойкости.    Для удаления пепла после использования (и остывания) горелки достаточно снять подставку для посуды и блок нагнетания и высыпать пепел из камеры горения перевернув горелку дном вверх. Остатки пепла, которые остались между камерой горения и корпусом, легко высыпать через большое отверстие сбоку корпуса, к которому во время работы горелки подключается блок нагнетания воздуха.   В данной модели горелки корпус оснащен съемной ручкой-держателем, что позволяет изменить положение (исправить) или переместить горелку во время её работы (горения). Такая возможность пригодится в случае резкого изменения погоды - можно быстро и безопасно перенести горелку в более защищенное место в случае резкого дождя или порывов ветра.   Характеристики: Материал металла: нержавеющая сталь разных марок и толщин (0,3 мм-0,8 мм); Камера сгорания: ресурс: от 800 часов работы горелки в зависимости от условий хранения и эксплуатации; объем 830 мл; Габаритные размеры: в упакованном состоянии: высота 13,5 см, диаметр 12 см; во время использования: высота 17,5 см, диаметр от 12 см до 16 см; Общий вес горелки вместе с чехлом, ручкой-держателем и кабелем USB-DC - 540 грамм.      Комплектация: корпус горелки в сборе с днищем и с камерой сгорания повышенной коррозионной стойкости; усиленная жаростойкая раскладная подставка для посуды; блок нагнетания воздуха с переключателем скорости и разъемом (гнездом) DC (5,5 мм * 2,1 мм); съемная ручка-держатель горелки; кабель USB-DC; чехол из прочной водонепроницаемой ткани "Оксфорд"; рекомендации по использованию горелки.

Эта модель горелки специально предназначена для длительной эксплуатации в сложных условиях окружающей среды!     Твердотопливная туристическая горелка  “Airwood  Heavy Duty АА-h  BM”  станет надежным спутником для путешественников, любящих длительные походы (месяц и более) в морском, тропическом климате или в других агрессивных для изделий из металла условиях. Все соединения деталей подставки для посуды и камеры сгорания выполнены крепежными элементами из нержавеющей стали. Все наиболее уязвимые узлы горелки изготовлены из нержавеющей стали повышенной коррозостойкости!     Благодаря блоку нагнетания воздуха горелка дает мощный нагрев даже при использовании сырых дров и очень быстро доводит до кипения емкость с водой. Время закипания 1-го литра воды составляет от 5-ти минут, в зависимости от качества топлива и условий окружающей среды.              Горелка имеет КПД сгорания топлива до 80% в отличие от 5-7% КПД у обычного костра. Это связано с тем, что в дыму от дров находится около 90% частиц, не сгоревших от недостатка кислорода. При нагнетании свежего воздуха в определенные места камеры сгорания горелки – эти мелкие частицы сгорают. На таком принципе и построена данная горелка: холодный воздух из блока нагнетания попадает в боковое отверстие нижней части наружной стенки корпуса горелки. Под действием вентилятора одна часть воздуха нагнетается в отверстия дна и нижней части камеры сгорания, а другая устремляется вверх - между стенками камеры сгорания и корпуса, где прогреваясь выходит через специальные отверстия и попадает в верхнюю часть камеры сгорания обеспечивая воспламенение древесного газа.     Там, где выходит воздух, образуются языки интенсивного пламени, вследствие обогащения кислородом.     На горелке без труда можно приготовить пищу (суп, каша, чай и тп.) объемом до 3х-4х литров.   В качестве топлива используются ветви, щепки, хворост и любое другое подручное твердое топливо.        Блок нагнетания воздуха  (поддув) в камеру сгорания оборудован трехпозиционным переключателем со следующими режимами: 1) Среднее положение – "Выключено" (печка работает в режиме естественной тяги с отсоединенным блоком нагнетания воздуха), 2) Верхнее положение - "Высокие обороты" (~3000 об./мин.) - для моментального разгара и кипячения воды, 3) Нижнее положение – "Малые обороты" (~2000 об./мин.) – для поддержания высокотемпературного пламени.      Блок нагнетания воздуха , которым комплектуется данная модель горелки,  питается от   двух батареек  размера АА или двух батареек размера ААА (подключение через переходники для батареек c размера AAA на АА, переходники заказываются отдельно). Время непрерывной работы блока от батарей AA "GP Super": • в режиме "Высокие обороты": ~30 часов; • в режиме "Малые обороты": ~50 часов;        В блоке нагнетания воздуха установлен  двигатель с экранированием от теплового излучения и пыле-влагоизоляцией на уровне класса защиты IP55 . Данное усовершенствование позволяет владельцу горелки пользоваться им в условиях повышенной влажности или запыленности (тропики, дождь, пустыня, пляж и т.п.) без опасений, что двигатель заклинит в самый неподходящий момент.      Горелка комплектуется обновленной версией раскладной подставки для посуды. Данный аксессуар имеет повышенную жаростойкость и специально разработан для более устойчивого размещения на горелке круглых котелков (кастрюль) с широким дном. Подставка понравится и любителям утреннего кофе на природе, приготовленном в турке (посуда с дном маленького диаметра).     Благодаря откидывающимся лапкам, на раскладной подставке будет "удобно", как посуде с диаметром дна 5 см, так и посуде с диаметром дна 25 см! После раскрывания лапки фиксируются под определенным углом к горизонту, обеспечивая тем самым надежный захват дна посуды, а при увеличении нагрузки лапки принимают горизонтальное положение, при этом верхняя часть полотна подставки по всему кругу немного расходится наружу, увеличивая жесткость подставки и устойчивость посуды.    Новая подставка отличается от предыдущей версии и наличием вентиляционных отверстий в виде названия бренда производителя. Это изменение уменьшило суммарную площадь вентиляционных отверстий на полотне подставки, что позволило улучшить ветрозащитные характеристики подставки и увеличить мощность горелки. Кроме того, надпись на подставке позволяет сразу отличить оригинальный продукт от копии. Также была уменьшена высота полотна подставки, что увеличило жесткость конструкции и улучшило нагрев дна посуды.        Новая камера сгорания, установленная в горелке, существенно отличается от старой версии: изменено количество, диаметр и конфигурация отверстий впрыска воздуха. Эти изменения были внесены для повышения качества горения дров в нижней части камеры. Удалось устранить забивание (засор) камеры тлеющим углем, а также улучшить горение сырых дров и таким образом максимально адаптировать горелку к реальным производным условиям, где сухие дрова – редкость. Кроме того, в новой версии камеры происходит стабильное горение топлива в режиме естественной тяги (с отсоединенным от горелки блоком нагнетания) – эта возможность очень важна для приготовления блюд, не требующих интенсивного пламени.           В данной модели  горелки  камера сгорания имеет более толстые стенки и увеличенный объем  по сравнению с камерой классических турбо-горелок серии Airwood BM.  Все элементы камеры сделаны из нержавеющей стали повышенной коррозостойкости.  Камера сгорания выполнена в жестком сборе (винтовое соединение) с корпусом, имеющим стандартные для турбо-горелок серии Airwood BM размеры.     Наружный кожух (корпус) горелки "Airwood  Heavy Duty АА-h  BM" имеет закрытое днище, благодаря которому образуется замкнутое пространство между двумя стенками горелки (между камерой сгорания и корпусом), то есть весь воздух из блока нагнетания (поддува) гарантированно подается в камеру сгорания. Таким образом, нет необходимости в поиске плоской площадки для размещения горелки, так как в таком варианте выполнения горелку можно использовать даже в подвешенном состоянии! Еще одним плюсом горелки с закрытым днищем корпуса является то, что после использования на земле не остаются ожоги, как после костра.  Днище  данной модели изготовлено  из нержавеющей стали повышенной коррозостойкости.   В данной модели горелки  корпус оснащен съемной ручкой-держателем , что позволяет изменить положение (исправить) или перенести горелку во время его работы (горения). Такая возможность пригодится в случае внезапного изменения погоды – можно быстро и безопасно перенести горелку в более защищенное место в случае внезапного дождя или порывов ветра.   Характеристики: Материал металла: нержавеющая сталь разных марок и толщин (0,3 мм-0,8 мм).; Камера сгорания: ресурс: от 800 часов работы горелки в зависимости от условий хранения и эксплуатации; объем 830мл; Габаритные размеры: в упакованном состоянии: высота 13,5см, диаметр 12см; при использовании: высота 17,5см, диаметр от 12см до 16см; Суммарный вес горелки вместе с чехлом, ручкой-держателем, батарейками: 600 грамм.     Комплектация: корпус горелки в сборе с днищем и камерой сгорания повышенной коррозостойкости; усиленная жаропрочная раскладная подставка для посуды; блок нагнетания воздуха под две батарейки размера АА; съемная ручка-держатель горелки; две батарейки "GP Super" размера АА (пальчик); чехол из прочной водонепроницаемой ткани "Оксфорд"; рекомендации по использованию горелки.         Как и все производители, мы оставляем за собой право вносить изменения во внешний вид и геометрию узлов нашей продукции для улучшения ее эксплуатационных характеристик. Поэтому полученный Вами продукт может отличаться от представленного на фотографиях нашего сайта или в обзорах наших клиентов или партнеров, но это означает, что у Вас есть более новая и улучшенная версия данной модели.     Также обращаем Ваше внимание на то, что Мы не несем ответственности за достаточно свободные интерпретации характеристик или принцип действия наших горелок, если они не размещены на нашем сайте в описании наших продуктов потому, что мы не имеем влияния на авторов этих интерпретаций.

Данная модель твердотопливной горелки специально создана для длительной эксплуатации в сложных условиях окружающей среды и универсальна в выборе питания принудительного нагнетания воздуха!     Твердотопливная туристическая горелка  “Airwood  Heavy Duty UP-h  BM”  станет надежным спутником для путешественников, любящих длительные походы (месяц и более) в морском, тропическом климате или в других агрессивных для изделий из металла условиях. Все соединения деталей подставки для посуды и камеры сгорания выполнены крепежными элементами из нержавеющей стали. Все наиболее уязвимые узлы горелки изготовлены из нержавеющей стали повышенной коррозостойкости! Блок принудительного нагнетания воздуха горелки Airwood Heavy Duty UP-h BM может питаться как от батареек так и от Power Bank, солнечной панели со встроенным аккумулятором или смартфона, подключенного через кабель OTG.   Благодаря блоку нагнетания воздуха горелка дает мощный нагрев даже при использовании сырых дров и очень быстро доводит до кипения емкость с водой. Время закипания 1-го литра воды составляет от 5-ти минут, в зависимости от качества топлива и условий окружающей среды.              Горелка имеет КПД сгорания топлива до 80% в отличие от 5-7% КПД у обычного костра. Это связано с тем, что в дыму от дров находится около 90% частиц, не сгоревших от недостатка кислорода. При нагнетании свежего воздуха в определенные места камеры сгорания горелки – эти мелкие частицы сгорают. На таком принципе и построена данная горелка: холодный воздух из блока нагнетания попадает в боковое отверстие нижней части наружной стенки корпуса горелки. Под действием вентилятора одна часть воздуха нагнетается в отверстия дна и нижней части камеры сгорания, а другая устремляется вверх - между стенками камеры сгорания и корпуса, где прогреваясь выходит через специальные отверстия и попадает в верхнюю часть камеры сгорания обеспечивая воспламенение древесного газа.     Там, где выходит воздух, образуются языки интенсивного пламени, вследствие обогащения кислородом.     На горелке без труда можно приготовить пищу (суп, каша, чай и тп.) объемом до 3х-4х литров.   В качестве топлива используются ветви, щепки, хворост и любое другое подручное твердое топливо.        Блок нагнетания воздуха  (поддув) в камеру сгорания оборудован трехпозиционным переключателем со следующими режимами: 1) Среднее положение – "Выключено" (печка работает в режиме естественной тяги с отсоединенным блоком нагнетания воздуха), 2) Верхнее положение - "Высокие обороты" (~3000 об./мин.) - для моментального разгара и кипячения воды, 3) Нижнее положение – "Малые обороты" (~2000 об./мин.) – для поддержания высокотемпературного пламени.      Блок нагнетания воздуха , которым комплектуется данная модель горелки,  универсален в выборе источника питания : это могут быть две батарейки размера АА или две батарейки размера ААА (подключение через переходники для батареек c размера AAA на АА, переходники заказываются отдельно), или любой другой источник питания с напряжением 5 Вольт постоянного тока, имеющий на выходе разъем (гнездо) USB или штекер DC размера 5.5mm x 2.1mm. К примеру, это может быть Power Bank, солнечная панель со встроенным аккумулятором или смартфон, подключенный через кабель OTG. При подключении внешнего источника питания в разъем (гнездо) DC блока нагнетания (через входящий в комплект поставки кабель "USB-DC") отсек с батареями в блоке нагнетания отключается автоматически. Время непрерывной работы блока от батарей AA "GP Super": • в режиме "Высокие обороты": ~30 часов; • в режиме "Малые обороты": ~50 часов; Потребляемый ток блоком нагнетания (в зависимости от источника питания): • в режиме "Высокие обороты": 70-100мА; • в режиме "Малые обороты": 30-50мА;        В блоке нагнетания воздуха установлен  двигатель с экранированием от теплового излучения и пыле-влагоизоляцией на уровне класса защиты IP55 . Данное усовершенствование позволяет владельцу горелки пользоваться им в условиях повышенной влажности или запыленности (тропики, дождь, пустыня, пляж и т.п.) без опасений, что двигатель заклинит в самый неподходящий момент.      Горелка комплектуется обновленной версией раскладной подставки для посуды. Данный аксессуар имеет повышенную жаростойкость и специально разработан для более устойчивого размещения на горелке круглых котелков (кастрюль) с широким дном. Подставка понравится и любителям утреннего кофе на природе, приготовленном в турке (посуда с дном маленького диаметра).     Благодаря откидывающимся лапкам, на раскладной подставке будет "удобно", как посуде с диаметром дна 5 см, так и посуде с диаметром дна 25 см! После раскрывания лапки фиксируются под определенным углом к горизонту, обеспечивая тем самым надежный захват дна посуды, а при увеличении нагрузки лапки принимают горизонтальное положение, при этом верхняя часть полотна подставки по всему кругу немного расходится наружу, увеличивая жесткость подставки и устойчивость посуды.    Новая подставка отличается от предыдущей версии и наличием вентиляционных отверстий в виде названия бренда производителя. Это изменение уменьшило суммарную площадь вентиляционных отверстий на полотне подставки, что позволило улучшить ветрозащитные характеристики подставки и увеличить мощность горелки. Кроме того, надпись на подставке позволяет сразу отличить оригинальный продукт от копии. Также была уменьшена высота полотна подставки, что увеличило жесткость конструкции и улучшило нагрев дна посуды.        Новая камера сгорания, установленная в горелке, существенно отличается от старой версии: изменено количество, диаметр и конфигурация отверстий впрыска воздуха. Эти изменения были внесены для повышения качества горения дров в нижней части камеры. Удалось устранить забивание (засор) камеры тлеющим углем, а также улучшить горение сырых дров и таким образом максимально адаптировать горелку к реальным производным условиям, где сухие дрова – редкость. Кроме того, в новой версии камеры происходит стабильное горение топлива в режиме естественной тяги (с отсоединенным от горелки блоком нагнетания) – эта возможность очень важна для приготовления блюд, не требующих интенсивного пламени.      В данной модели  горелки  камера сгорания имеет более толстые стенки и увеличенный объем  по сравнению с камерой классических турбо-горелок серии Airwood BM.  Все элементы камеры сделаны из нержавеющей стали повышенной коррозостойкости.  Камера сгорания выполнена в жестком сборе (винтовое соединение) с корпусом, имеющим стандартные для турбо-горелок серии Airwood BM размеры.   Наружный кожух (корпус) горелки "Airwood  Heavy Duty UP-h  BM" имеет закрытое днище, благодаря которому образуется замкнутое пространство между двумя стенками горелки (между камерой сгорания и корпусом), то есть весь воздух из блока нагнетания (поддува) гарантированно подается в камеру сгорания. Таким образом, нет необходимости в поиске плоской площадки для размещения горелки, так как в таком варианте выполнения горелку можно использовать даже в подвешенном состоянии! Еще одним плюсом горелки с закрытым днищем корпуса является то, что после использования на земле не остаются ожоги, как после костра.  Днище  данной модели изготовлено  из нержавеющей стали повышенной коррозостойкости.   В данной модели горелки  корпус оснащен съемной ручкой-держателем , что позволяет изменить положение (исправить) или перенести горелку во время его работы (горения). Такая возможность пригодится в случае внезапного изменения погоды – можно быстро и безопасно перенести горелку в более защищенное место в случае внезапного дождя или порывов ветра.   Характеристики: Материал металла: нержавеющая сталь разных марок и толщин (0,3 мм-0,8 мм).; Камера сгорания: ресурс: от 800 часов работы горелки в зависимости от условий хранения и эксплуатации; объем 830мл; Габаритные размеры: в упакованном состоянии: высота 13,5см, диаметр 12см; при использовании: высота 17,5см, диаметр от 12см до 16см; Суммарный вес горелки вместе с чехлом, ручкой-держателем, батарейками и кабелем USB-DC - 620 грамм.     Комплектация: корпус горелки в сборе с днищем и камерой сгорания повышенной коррозостойкости; усиленная жаропрочная раскладная подставка для посуды; блок нагнетания воздуха под две батарейки размера АА и DC разъемом (5,5мм*2,1мм); съемная ручка-держатель горелки; две батарейки "GP Super" размера АА (пальчик); кабель USB-DC; чехол из прочной водонепроницаемой ткани "Оксфорд"; рекомендации по использованию горелки.         Как и все производители, мы оставляем за собой право вносить изменения во внешний вид и геометрию узлов нашей продукции для улучшения ее эксплуатационных характеристик. Поэтому полученный Вами продукт может отличаться от представленного на фотографиях нашего сайта или в обзорах наших клиентов или партнеров, но это означает, что у Вас есть более новая и улучшенная версия данной модели.     Также обращаем Ваше внимание на то, что Мы не несем ответственности за достаточно свободные интерпретации характеристик или принцип действия наших горелок, если они не размещены на нашем сайте в описании наших продуктов потому, что мы не имеем влияния на авторов этих интерпретаций.

These cute worms want to be king and queen. These cute worms want to be kings. Size 2 inches (10 cm.) Handmade from cotton yarn and filled with hypoallergenic filling. Thanks for you purchase! I will come to you from Ukraine.

I am a beautiful flower. Right ? Size 2 inches (10 cm.) Handmade from cotton yarn and filled with hypoallergenic filling. Thanks for you purchase! I will come to you from Ukraine.

Winter worm with hat and scarf. Write the color of the hat and scarf in the comments . Size 2 inches (10 cm.) Handmade from cotton yarn and filled with hypoallergenic filling. Thanks for you purchase! I will come to you from Ukraine.

Winter worm with hat and scarf. Write the color of the hat and scarf in the comments . Size 2 inches (10 cm.) Handmade from cotton yarn and filled with hypoallergenic filling. Thanks for you purchase! I will come to you from Ukraine.

Crochet Frog coaster/aplique pattern digital download. This is a PDF CROCHET PATTERN only! Create an original decoration for Halloween or any other celebration. You can make in a different color. This pattern is suitable for those who have crochet skills for beginners and know the chain, crochet in rounds, double crochet. Pattern is in standard US terms. Approximately 3” (8cm.) wide. You will need: - cotton blend yarn Green ( Alize Cotton Gold) - hook B (2 mm.) The pdf file contains a step-by-step description, lots of photos and crocheting pattern. Disclaimer: This is PDF Crochet Pattern to make a frog. NOT the actual finished item. There will be no refunds for failure to read the listing description, this listing is clearly for a crochet pattern. Happy crocheting! Kind regards, Tanya.

Amigurumi keychain heart with wings, Crochet Pattern PDF. Pattern is in standard American terms. The pdf file contains a step-by-step description. Happy crocheting!!! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Crochet Cat coaster pattern digital download. This is a PDF CROCHET PATTERN only! Create an original decoration for Halloween or any other celebration. You can make in a different color. This pattern is suitable for those who have crochet skills for beginners and know the chain, crochet in rounds, double crochet. Pattern is in standard US terms. Approximately 3” (8cm.) wide. You will need: - cotton blend yarn Green, Light green, Orange ( YarnArt Jeans) - hook B (2 mm.) The pdf file contains a step-by-step description, lots of photos and crocheting pattern. Disclaimer: This is PDF Crochet Pattern to make a pumpkin. NOT the actual finished item. There will be no refunds for failure to read the listing description, this listing is clearly for a crochet pattern. Happy crocheting! Kind regards, Tanya.

This cute worm is ready to wish you a Happy Birthday. Write the color of the hat and balloon in the comments . Size 2 inches (10 cm.) Handmade from cotton yarn and filled with hypoallergenic filling. Thanks for you purchase! I will come to you from Ukraine.

The rain stopped and a Rainbow Worm appeared . Let's have fun? Size 2 inches (10 cm.) Handmade from cotton yarn and filled with hypoallergenic filling. Thanks for you purchase! I will come to you from Ukraine.

My color is Blue and Yellow. I am strong and free like my people. Glory to Ukraine! Glory to Heroes! Size 2 inches (10 cm.) Handmade from cotton yarn and filled with hypoallergenic filling. Thanks for you purchase! I will come to you from Ukraine. You will receive Cute blue and yellow worm with Trident magnet.

Luxurious hanging hammock chair in Oriental style, with an openwork, lace back; soft, like a cloud, pillows, sewn with a royal, carriage screed. In such an armchair you feel like an oriental princess Shakhirizada from the fairy tale "1000 and 1 night". This chair is so roomy, you can lie on it and dream, meditate, doze off, and if you hang it somewhere on the terrace, in the garden, or by the pool , or on the beach by the ocean, where palm trees and sand are just relaxation and pleasure, lying and swaying drinking Pina-calada, watching the sunsets, or a cup of aromatic coffee in the morning-- and let the whole world- wait... The hammock is woven from an expensive, special hammock cord that does not stretch and has a static core. One thread can withstand a load of 70 kg, each knot is woven with high quality and tightly, by my hands, all photos are exclusively mine, taken in my room (with characteristic wallpaper on the wall ...) I can send additional photos. Also, at the request of the buyer, I weave a hammock of a different color, and I can also choose the color of the fabric, texture and shade for sewing the pillow. The hammock has a metal loop at the top that protects the threads and weaving from chafing. On this loop, the hammock can be attached to the ceiling, or to any beam or metal rack, with a metal chain with a carabiner, which can be used to adjust the distance of the hammock from the floor. The length of the hammock itself is 210 cm. "Lace"- macrame hammock chair. ☘ ???? diameter 110cm; -It's possible to manufacture with a diameter of 100cm, or 90cm; ???? max.load 150 kg; ???? Khaki color (execution in other colors is possible);???? ???? for home, and for terrace, garden, courtyard

The hanging hammock chair in ivory with chic and rich cushions to match was custom made for a charming New York customer. At her request, I increased the diameter of the seat to 80 cm, and weaved the straps longer for ease of fastening in a certain place. The work took 2 weeks. Therefore, if you have specific ideas for the design of a hanging hammock chair, I will bring them to reality with great pleasure!) This hanging hammock chair can be placed on the beach by the ocean, or near the pool, in a cafe, or in a hookah. This is the perfect place to unwind, you can drink your favorite drink, and enjoy a luxurious holiday. This is a luxurious, comfortable, solid, high-quality, cozy, roomy hanging hammock chair, in which you get so much pleasure and enjoyment, you want to relax and sway... A gentle marshmallow armchair, soft as a cloud, comfortable and roomy, it will not leave indifferent any family member! I just want to swing in it, and dream! Children will especially appreciate this chair, because for them it is also a comfortable swing in which you can swing as much as possible! A powder-colored hammock chair with airy, cloud-like pillows of a delicate ivory color. The hammock can be placed in the nursery, on the terrace, in the garden, on the balcony. Yes, anywhere!) The main thing is who will be the first to take the place!) He will immediately create an island of extraordinary comfort and relaxation around him. The hammock is woven from a special polyester cord, it does not stretch, does not fade in the sun, and does not attract dust. A thread with a beautiful silk shine, shimmers in the sun and looks very beautiful in weaving. This is a high-quality wicker hammock, with tight knots, each turn of the cord tightly wraps around the metal frame, without gaps, and also with a beautiful lace fringe, each cord ends with a neat knot. The seat is tight, like a drum! This is a very comfortable chair with insanely soft, rich cushions. In such an armchair, each of you will feel like a queen, immersed in a cloud of comfort and coziness. Furniture fabric is used for sewing pillows: flock and velor. Furniture fabrics practically do not wrinkle, do not form pillows, can be easily cleaned with Vanish soap solution. When making the pillows, I use fabric-covered buttons and a so-called coach tie, which gives the chair a sophisticated look. I fill the pillows with holofiber, this is a hypoallergenic, practical material that does not absorb odors and moisture, and also keeps its shape perfectly. - seat diameter -70x90cm (maybe 60x80cm - optional); - max. load - 150 kg; - the height of the hammock is 187 cm; - powder color (execution in other colors is possible). The length of the hammock can be adjusted with a metal chain and carabon, all of which can be purchased from any construction store. And also, I can weave the hammock lines a little longer, at the request of the buyer. How to attach and to what? For fastening you will need a carabiner # 8 or # 9, and a chain for adjusting the length of the hammock, with your ceiling height. Ceiling fixing depends on the type of your floor: - for concrete, brick, stone - you will need an anchor bolt with a ring (drill a hole, remove dust, insert a bolt, hammer in, and tighten using a wrench or ring); - for wood - ring screw or hook; - for the street and at home - you can use the racks for the hanging chair, but you need to take into account the height of the hammock.

This hanging hammock chair can be placed on the beach by the ocean, or near the pool, in a cafe, or in a hookah. This is the perfect place to unwind, you can drink your favorite drink, and enjoy a luxurious holiday. This is a luxurious, comfortable, solid, high-quality, cozy, roomy hanging hammock chair, in which you get so much pleasure and enjoyment, you want to relax and sway... A gentle marshmallow armchair, soft as a cloud, comfortable and roomy, it will not leave indifferent any family member! I just want to swing in it, and dream! Children will especially appreciate this chair, because for them it is also a comfortable swing in which you can swing as much as possible! Hanging hammock chair, beautiful, rich violet color with large, cloudy cushions with small houndstooth pattern, graphite velor with a water-repellent effect, and with pink buttons to match the small, decorative cushion. The chair is woven with chic tassels on the sides, and also has a beautiful wicker element with a tassel on the back of the chair. The hammock can be placed in the children's room, by the fireplace in the living room, on the terrace, in the garden, on the balcony, by the pool. Yes, anywhere!) The main thing is who will be the first to take a place!) He will immediately create an island of extraordinary comfort and relaxation around him. The hammock is woven from a special polyester, hammock cord, it does not stretch, does not fade in the sun and does not attract dust. A thread with a beautiful silk sheen shimmers in the sun and looks very nice in weaving. Each knot is tightened tightly and with high quality, the seat is strong - stretched like a drum! This is what the buyers say! This is a high-quality wicker hammock, with tight knots, each turn of the cord tightly wraps around the metal frame, without gaps, and also with a beautiful lace fringe, each cord ends with a neat knot. The seat is tight, like a drum! This is a very comfortable chair with insanely soft, rich cushions. In such an armchair, each of you will feel like a queen, immersed in a cloud of comfort and coziness. One thread of a hammock cord can withstand a load of 70 kg, and each sling on which the hammock chair weighs consists of 8 threads, tightly and tightly woven knots. Therefore, a hanging hammock chair can withstand a load of 150 kg or more. These are my personal works, woven by my hands, my photos were taken in my room and in the yard, as all the photos of hammocks speak about. Furniture fabric is used for sewing pillows: flock and velor. Furniture fabrics practically do not wrinkle, do not form pillows, can be easily cleaned with Vanish soap solution. When making the pillows, I use fabric-covered buttons and a so-called coach tie, which gives the chair a sophisticated look. I fill the pillows with holofiber, this is a hypoallergenic, practical material that does not absorb odors and moisture, and also keeps its shape perfectly. - seat diameter -70x90cm (maybe 60x80cm - optional); - max. load - 150 kg; - the height of the hammock is 187 cm; - soft purple or pink fuchsia color (execution in other colors is possible). The length of the hammock can be adjusted with a metal chain and carabon, all of which can be purchased from any construction store. And also, I can weave the hammock lines a little longer, at the request of the buyer. How to attach and to what? For fastening you will need a carabiner # 8 or # 9, and a chain for adjusting the length of the hammock, with your ceiling height. Ceiling fixing depends on the type of your floor: - for concrete, brick, stone - you will need an anchor bolt with a ring (drill a hole, remove dust, insert a bolt, hammer in, and tighten using a wrench or ring); - for wood - ring screw or hook; - for the street and at home - you can use the racks for the hanging chair, but you need to take into account the height of the hammock.

I wanted to show how original the pink amethyst cushions look with the graphite hammock chair.. At your request, I can weave a hammock of any other color, and sew pillows for it. Whatever your wish, I can make it come true!) This hanging hammock chair can be placed on the beach by the ocean, or near the pool, in a cafe, or in a hookah. This is the perfect place to unwind, you can drink your favorite drink, and enjoy a luxurious holiday. This is a luxurious, comfortable, solid, high-quality, cozy, roomy hanging hammock chair, in which you get so much pleasure and enjoyment, you want to relax and sway... This chic, comfortable hanging chair, with rich, soft, like cloud-like pillows, comfortable and spacious, will not leave indifferent any member of the family! I just want to swing in it and dream! Children will especially love this chair, because for them it is also a comfortable hanging swing, on which you can swing as much as possible! A graphite-colored hammock chair with lacy butterflies on the back and apple-green pillows. In addition to the set, I sewed a pistachio-colored decorative pillow with macrame elements. I decided to weave a new graphite chair with butterflies, but also, I added two beautiful tassels to it along the edges of the seat, which adds a hanging an armchair of a certain charm and sophisticated look. The hammock can be placed in the nursery, on the terrace, in the garden, and on the balcony. Yes, anywhere!) The main thing is who will be the first to take the place!) He will immediately create an island of extraordinary comfort and relaxation around him. The hammock is woven from a special polyester cord, it does not stretch, does not fade in the sun, and does not attract dust. A thread with a beautiful silk shine, shimmers in the sun and looks very beautiful in weaving. Furniture fabric is used for sewing pillows: flock and velor. Furniture fabrics practically do not wrinkle, do not form pillows, can be easily cleaned with Vanish soap solution. When making the pillows, I use fabric-covered buttons and a so-called coach tie, which gives the chair a sophisticated look. I fill the pillows with holofiber, this is a hypoallergenic, practical material that does not absorb odors and moisture, and also keeps its shape perfectly. - seat diameter -70x90cm (maybe 60x80cm - optional); - max. load - 150 kg; - the height of the hammock is 200 cm; - color - graphite (execution in other colors is possible). How to attach and to what? For fastening you will need a carabiner № 9, and a chain for adjusting the length of the hammock, with your ceiling height. Ceiling fixing depends on the type of your ceiling : - for concrete, brick, stone - you will need an anchor bolt with a ring (drill a hole, remove dust, insert a bolt, hammer in, and tighten using a wrench or ring); - for wood - ring screw or hook; - for the street and at home - you can use the racks for the hanging chair, but you need to take into account the height of the hammock. In the last photo I wanted to show that the customer wanted to buy this hammock with butterflies, but with graphite colored pillows. I sewed pillows for him as he wished. Therefore, if you want the pillows or the hammock itself to be of a different color, I will select for you, individually, and do it as you want, just write me your wishes. But, take into account the time that it will take me to make your order, if suddenly you need a ready-made hammock, by a certain date. The hammock is thought out to the smallest detail, made using macrame weaving technique. The hanging chair is attached to a metal loop that prevents the threads from chafing. One, polyester thread, withstands a load of 70 kg, hanging chair is held by 4 slings, each of which consists of 8 threads. This is a very reliable hanging chair! Each knot is woven with great love, by my hands. This hammock will be the most comfortable place in your family! I can weave a hanging chair for you from a different color of thread, and sew pillows from a different color under it. For a graphite-colored hammock, there is a mustard-colored fabric, dahlia red, amethyst pink is also suitable. I will consider all your wishes. It may take a certain amount of time, so if you want something special, it is better to place an order a month before the specified date.

I wanted to show how original the pink amethyst cushions look with the graphite hammock chair.. At your request, I can weave a hammock of any other color, and sew pillows for it. Whatever your wish, I can make it come true!) This hanging hammock chair can be placed on the beach by the ocean, or near the pool, in a cafe, or in a hookah. This is the perfect place to unwind, you can drink your favorite drink, and enjoy a luxurious holiday. This is a luxurious, comfortable, solid, high-quality, cozy, roomy hanging hammock chair, in which you get so much pleasure and enjoyment, you want to relax and sway... This chic, comfortable hanging chair, with rich, soft, like cloud-like pillows, comfortable and spacious, will not leave indifferent any member of the family! I just want to swing in it and dream! Children will especially love this chair, because for them it is also a comfortable hanging swing, on which you can swing as much as possible! A graphite-colored hammock chair with lacy butterflies on the back and apple-green pillows. In addition to the set, I sewed a pistachio-colored decorative pillow with macrame elements. I decided to weave a new graphite chair with butterflies, but also, I added two beautiful tassels to it along the edges of the seat, which adds a hanging an armchair of a certain charm and sophisticated look. The hammock can be placed in the nursery, on the terrace, in the garden, and on the balcony. Yes, anywhere!) The main thing is who will be the first to take the place!) He will immediately create an island of extraordinary comfort and relaxation around him. The hammock is woven from a special polyester cord, it does not stretch, does not fade in the sun, and does not attract dust. A thread with a beautiful silk shine, shimmers in the sun and looks very beautiful in weaving. Furniture fabric is used for sewing pillows: flock and velor. Furniture fabrics practically do not wrinkle, do not form pillows, can be easily cleaned with Vanish soap solution. When making the pillows, I use fabric-covered buttons and a so-called coach tie, which gives the chair a sophisticated look. I fill the pillows with holofiber, this is a hypoallergenic, practical material that does not absorb odors and moisture, and also keeps its shape perfectly. - seat diameter -70x90cm (maybe 60x80cm - optional); - max. load - 150 kg; - the height of the hammock is 200 cm; - color - graphite (execution in other colors is possible). How to attach and to what? For fastening you will need a carabiner № 9, and a chain for adjusting the length of the hammock, with your ceiling height. Ceiling fixing depends on the type of your ceiling : - for concrete, brick, stone - you will need an anchor bolt with a ring (drill a hole, remove dust, insert a bolt, hammer in, and tighten using a wrench or ring); - for wood - ring screw or hook; - for the street and at home - you can use the racks for the hanging chair, but you need to take into account the height of the hammock. In the last photo I wanted to show that the customer wanted to buy this hammock with butterflies, but with graphite colored pillows. I sewed pillows for him as he wished. Therefore, if you want the pillows or the hammock itself to be of a different color, I will select for you, individually, and do it as you want, just write me your wishes. But, take into account the time that it will take me to make your order, if suddenly you need a ready-made hammock, by a certain date. The hammock is thought out to the smallest detail, made using macrame weaving technique. The hanging chair is attached to a metal loop that prevents the threads from chafing. One, polyester thread, withstands a load of 70 kg, hanging chair is held by 4 slings, each of which consists of 8 threads. This is a very reliable hanging chair! Each knot is woven with great love, by my hands. This hammock will be the most comfortable place in your family! I can weave a hanging chair for you from a different color of thread, and sew pillows from a different color under it. For a graphite-colored hammock, there is a mustard-colored fabric, dahlia red, amethyst pink is also suitable. I will consider all your wishes. It may take a certain amount of time, so if you want something special, it is better to place an order a month before the specified date.

I wanted to show how original the pink amethyst cushions look with the graphite hammock chair.. At your request, I can weave a hammock of any other color, and sew pillows for it. Whatever your wish, I can make it come true!) This hanging hammock chair can be placed on the beach by the ocean, or near the pool, in a cafe, or in a hookah. This is the perfect place to unwind, you can drink your favorite drink, and enjoy a luxurious holiday. This is a luxurious, comfortable, solid, high-quality, cozy, roomy hanging hammock chair, in which you get so much pleasure and enjoyment, you want to relax and sway... This chic, comfortable hanging chair, with rich, soft, like cloud-like pillows, comfortable and spacious, will not leave indifferent any member of the family! I just want to swing in it and dream! Children will especially love this chair, because for them it is also a comfortable hanging swing, on which you can swing as much as possible! A graphite-colored hammock chair with lacy butterflies on the back and apple-green pillows. In addition to the set, I sewed a pistachio-colored decorative pillow with macrame elements. I decided to weave a new graphite chair with butterflies, but also, I added two beautiful tassels to it along the edges of the seat, which adds a hanging an armchair of a certain charm and sophisticated look. The hammock can be placed in the nursery, on the terrace, in the garden, and on the balcony. Yes, anywhere!) The main thing is who will be the first to take the place!) He will immediately create an island of extraordinary comfort and relaxation around him. The hammock is woven from a special polyester cord, it does not stretch, does not fade in the sun, and does not attract dust. A thread with a beautiful silk shine, shimmers in the sun and looks very beautiful in weaving. Furniture fabric is used for sewing pillows: flock and velor. Furniture fabrics practically do not wrinkle, do not form pillows, can be easily cleaned with Vanish soap solution. When making the pillows, I use fabric-covered buttons and a so-called coach tie, which gives the chair a sophisticated look. I fill the pillows with holofiber, this is a hypoallergenic, practical material that does not absorb odors and moisture, and also keeps its shape perfectly. - seat diameter -70x90cm (maybe 60x80cm - optional); - max. load - 150 kg; - the height of the hammock is 200 cm; - color - graphite (execution in other colors is possible). How to attach and to what? For fastening you will need a carabiner № 9, and a chain for adjusting the length of the hammock, with your ceiling height. Ceiling fixing depends on the type of your ceiling : - for concrete, brick, stone - you will need an anchor bolt with a ring (drill a hole, remove dust, insert a bolt, hammer in, and tighten using a wrench or ring); - for wood - ring screw or hook; - for the street and at home - you can use the racks for the hanging chair, but you need to take into account the height of the hammock. In the last photo I wanted to show that the customer wanted to buy this hammock with butterflies, but with graphite colored pillows. I sewed pillows for him as he wished. Therefore, if you want the pillows or the hammock itself to be of a different color, I will select for you, individually, and do it as you want, just write me your wishes. But, take into account the time that it will take me to make your order, if suddenly you need a ready-made hammock, by a certain date. The hammock is thought out to the smallest detail, made using macrame weaving technique. The hanging chair is attached to a metal loop that prevents the threads from chafing. One, polyester thread, withstands a load of 70 kg, hanging chair is held by 4 slings, each of which consists of 8 threads. This is a very reliable hanging chair! Each knot is woven with great love, by my hands. This hammock will be the most comfortable place in your family! I can weave a hanging chair for you from a different color of thread, and sew pillows from a different color under it. For a graphite-colored hammock, there is a mustard-colored fabric, dahlia red, amethyst pink is also suitable. I will consider all your wishes. It may take a certain amount of time, so if you want something special, it is better to place an order a month before the specified date.

I wanted to show how original the pink amethyst cushions look with the graphite hammock chair.. At your request, I can weave a hammock of any other color, and sew pillows for it. Whatever your wish, I can make it come true!) This hanging hammock chair can be placed on the beach by the ocean, or near the pool, in a cafe, or in a hookah. This is the perfect place to unwind, you can drink your favorite drink, and enjoy a luxurious holiday. This is a luxurious, comfortable, solid, high-quality, cozy, roomy hanging hammock chair, in which you get so much pleasure and enjoyment, you want to relax and sway... This chic, comfortable hanging chair, with rich, soft, like cloud-like pillows, comfortable and spacious, will not leave indifferent any member of the family! I just want to swing in it and dream! Children will especially love this chair, because for them it is also a comfortable hanging swing, on which you can swing as much as possible! A graphite-colored hammock chair with lacy butterflies on the back and apple-green pillows. In addition to the set, I sewed a pistachio-colored decorative pillow with macrame elements. I decided to weave a new graphite chair with butterflies, but also, I added two beautiful tassels to it along the edges of the seat, which adds a hanging an armchair of a certain charm and sophisticated look. The hammock can be placed in the nursery, on the terrace, in the garden, and on the balcony. Yes, anywhere!) The main thing is who will be the first to take the place!) He will immediately create an island of extraordinary comfort and relaxation around him. The hammock is woven from a special polyester cord, it does not stretch, does not fade in the sun, and does not attract dust. A thread with a beautiful silk shine, shimmers in the sun and looks very beautiful in weaving. Furniture fabric is used for sewing pillows: flock and velor. Furniture fabrics practically do not wrinkle, do not form pillows, can be easily cleaned with Vanish soap solution. When making the pillows, I use fabric-covered buttons and a so-called coach tie, which gives the chair a sophisticated look. I fill the pillows with holofiber, this is a hypoallergenic, practical material that does not absorb odors and moisture, and also keeps its shape perfectly. - seat diameter -70x90cm (maybe 60x80cm - optional); - max. load - 150 kg; - the height of the hammock is 200 cm; - color - graphite (execution in other colors is possible). How to attach and to what? For fastening you will need a carabiner № 9, and a chain for adjusting the length of the hammock, with your ceiling height. Ceiling fixing depends on the type of your ceiling : - for concrete, brick, stone - you will need an anchor bolt with a ring (drill a hole, remove dust, insert a bolt, hammer in, and tighten using a wrench or ring); - for wood - ring screw or hook; - for the street and at home - you can use the racks for the hanging chair, but you need to take into account the height of the hammock. In the last photo I wanted to show that the customer wanted to buy this hammock with butterflies, but with graphite colored pillows. I sewed pillows for him as he wished. Therefore, if you want the pillows or the hammock itself to be of a different color, I will select for you, individually, and do it as you want, just write me your wishes. But, take into account the time that it will take me to make your order, if suddenly you need a ready-made hammock, by a certain date. The hammock is thought out to the smallest detail, made using macrame weaving technique. The hanging chair is attached to a metal loop that prevents the threads from chafing. One, polyester thread, withstands a load of 70 kg, hanging chair is held by 4 slings, each of which consists of 8 threads. This is a very reliable hanging chair! Each knot is woven with great love, by my hands. This hammock will be the most comfortable place in your family! I can weave a hanging chair for you from a different color of thread, and sew pillows from a different color under it. For a graphite-colored hammock, there is a mustard-colored fabric, dahlia red, amethyst pink is also suitable. I will consider all your wishes. It may take a certain amount of time, so if you want something special, it is better to place an order a month before the specified date.

Heart set 15 pieces. Extra large red wooden carved heart. This is table decor for the home. Heart ornament. 3D heart that will be a great gift for Valentine's Day, for an engagement. Dimension heart: Height 15 cm (5.9") Width 15 cm (5.9") Depth 4cm (1.57") ✅  Collar unfinished. ✅  Processing time 5-7 days.

The "Airwood Euro-h BM" solid fuel stove is lightweight, compact, and simply indispensable in conditions with limited wood and time! Thanks to the air pressurization block, the stove provides powerful heating even when using wet wood and quickly brings water to a boil. The boiling time for 0.26 gallons of water is 5 minutes or more, depending on the quality of the fuel and the surrounding environment.  The burner has a fuel combustion efficiency of up to 80%, compared to the 5-7% efficiency of a regular campfire. This is because the smoke from the wood contains about 90% of particles that did not burn due to lack of oxygen. When fresh air is introduced to certain areas of the burner's combustion chamber, these small particles can be burned. This is the principle on which this burner is built: cold air from the air intake enters the side opening of the lower outer wall of the burner housing. Under the action of the fan, one part of the air is forced into the openings at the bottom and lower part of the combustion chamber, while the other is directed upwards between the walls of the combustion chamber and the housing. There, as it is heated, it exits through special openings and enters the upper part of the combustion chamber, providing ignition of the wood gas. Where the air exits, tongues of intense flames are formed due to the enrichment of oxygen. On the stove, food (soup, porridge, tea, etc.) with a volume of up to 0.8-1.1 gallons can be cooked effortlessly. Branches, twigs, kindling, and any other available solid fuel can be used as fuel. Air injection block (air blower) for the combustion chamber is equipped with a three-position switch with the following modes: Middle position - "Off" (the stove operates in natural draft mode with the air injection block disconnected); Upper position - "High speed" (~ 3000 rpm) - for quick ignition and boiling water; Lower position - "Low speed" (~ 2000 rpm) - for maintaining high-temperature flame The fan of the air injection block is powered by 2 AA batteries with a voltage of 3 V. Continuous operation time of the block from AA batteries: • in "High speed" mode: ~ 30 hours; • in "Low speed" mode: ~ 50 hours; The air injection block is equipped with a motor shielded from thermal radiation and dust-moisture insulation at the IP55 protection class level. This improvement allows the stove owner to use it in conditions of increased humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the motor will fail at the most inappropriate moment. The burner comes equipped with an updated version of a foldable stand for cookware. This accessory has increased heat resistance and is specially designed for more stable placement of round pots with wide bottoms on the burner. The stand will be appreciated by fans of morning coffee in nature made in a Turkish coffee pot with a small diameter bottom. Thanks to its foldable legs, the stand is "convenient" for cookware with bottom diameters ranging from 1.97 and 9.84 inches! After the legs are opened, they are fixed at a certain angle to the horizon, ensuring a reliable grip on the bottom of the cookware. When the load is increased, the legs take a horizontal position, and the upper part of the stand's fabric spreads slightly outward around the entire circle, increasing the rigidity of the stand and the stability of the cookware.   The new stand differs from the previous version in the presence of ventilation holes in the shape of the manufacturer's brand name. This change reduced the total area of ventilation holes on the stand's fabric, which improved the wind protection characteristics of the stand and increased the burner's power. Additionally, the text on the stand allows for easy differentiation between the original product and a copy. The height of the stand's fabric was also reduced, increasing the construction's rigidity and improving the heating of the cookware's bottom.  The new combustion chamber installed in the burner is significantly different from the old version: the quantity, diameter, and configuration of the air injection holes have been changed to improve the quality of wood burning in the lower part of the chamber. It was possible to eliminate clogging of the chamber with smoldering coal and improve the burning of wet wood, thus maximizing the adaptation of the burner to real hiking conditions where dry wood is scarce. In addition, the new version of the chamber ensures stable fuel burning in natural draft mode (with the pump block disconnected from the burner) - this feature is very important for cooking dishes that do not require intense flames.  The outer casing of the solid fuel burner "Airwood Euro-h BM" has a closed bottom, which creates a sealed space between the two walls of the burner (between the combustion chamber and the casing), meaning that all air from the blower unit (air supply) is guaranteed to be delivered to the combustion chamber. Therefore, there is no need to search for a flat surface to place the burner, as it can even be used in a suspended state! Another advantage of the burner with a closed bottom casing is that there are no burns left on the ground after use, as there are after a bonfire.  In this model of burner, the casing is equipped with a removable handle holder, which allows you to change the position (adjust) or move the burner during its operation (burning). This option will come in handy in case of sudden weather changes - you can quickly and safely move the burner to a more sheltered place in case of sudden rain or gusts of wind. Features: • Metal material: stainless steel of various grades and thicknesses (0.01 in-0.03 in); • Combustion chambers: ◦ from 300 to 800 and more hours of burner operation depending on storage and usage conditions; ◦ volume of 23.3 fl oz; Dimensions: ◦ in packaged state: height of 4.7 in, diameter of 4.7 in; ◦ during use: height of 6.3 in, diameter from 4.7 in to 6.3 in; • Total weight of burner with case, batteries, and handle grip: 1.06 lbs . Package includes: 1. Burner body assembled with combustion chamber and bottom;  2. Reinforced heat-resistant folding stand for cookware;  3. Air compression unit powered by two AA batteries;  4. Detachable handle grip for the burner;  5. Case made of strong waterproof Oxford fabric;  6. Instructions for using the burner;  7. Two adapters for AAA batteries to AA batteries.

This solid fuel turbojet engine model is specifically designed for long-term operation in challenging environmental conditions, and the forced air supply unit can be powered by any external power source with a voltage of 3-6V, which has a USB output.   The Airwood Heavy Duty USB-h BM camping stove will be a reliable companion for travelers who enjoy long trips (a month or more) in a marine, tropical climate, or in other aggressive environments for metal products. All connections of the utensil stand and combustion chamber are made with stainless steel fasteners. All the most vulnerable parts of the stove are made of highly corrosion-resistant stainless steel! The forced air supply unit of the Airwood Heavy Duty USB-h BM stove can be powered by a Power Bank, Power Box BM power module, solar panel with built-in battery, smartphone connected via OTG cable, or any other external power source with a constant voltage of 3-6V that has a USB output or a 0.22 inches x 0.08 inches DC plug.  Thanks to the air injection block, the burner provides powerful heating even when using raw wood and quickly brings the water capacity to a boil. The boiling time of 0.26 gallons of water is from 5 minutes, depending on the quality of the fuel and the surrounding environment.   The burner has a fuel combustion efficiency of up to 80%, unlike the 5-7% efficiency of regular bonfires. This is because about 90% of the particles in the smoke from the wood are unburned due to lack of oxygen. When fresh air is injected into certain parts of the burner combustion chamber, these fine particles burn. This is the principle behind this burner: cold air from the injection block enters the side hole at the bottom of the outer wall of the burner housing. Under the action of the fan, one part of the air is injected into the holes in the bottom and lower part of the combustion chamber, while the other is directed upward between the walls of the combustion chamber and the housing, where it is heated and exits through special holes, entering the upper part of the combustion chamber and igniting the wood gas.   Where the air exits, intense flames are formed due to oxygen enrichment.  The burner can be used to cook food (soup, porridge, tea, etc.) with a volume of up to 0.79-1.06 gallons without any effort.  Branches, twigs, bark, and any other readily available solid fuel are used as fuel.   The air supply (blower) block for the combustion chamber is equipped with a DC input connector (socket) (0.22 inches * 0.08 inches.) with a hinged cap-plug to protect the connector from contamination, and a switch with the following modes: Upper position - "High speed" - for instant ignition and water boiling, Lower position - "Low speed" - to maintain high-temperature flames.  The current consumed by the blower block depends on the voltage of the power supply: • in "High speed" mode: 70-100mA; • in "Low speed" mode: 20-50mA;   In the air compressor unit, there is an engine with thermal radiation and dust-humidity protection at the IP55 protection level. This improvement allows the owner of the burner to use it in conditions of high humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the engine will fail at the most inappropriate moment.   The burner also operates in natural draft mode, for which it is sufficient to disconnect  the air compressor unit from the burner body. This mode is suitable for cooking dishes that do not require a strong flame, such as porridge.   The burner comes with a folding stand for cookware. This burner component has increased heat resistance and is specially designed for more reliable placement of round pots (pans) with a wide bottom on the burner. However, the stand will also be useful for fans of morning coffee in nature, prepared in a Turkish coffee pot (a dish with a small bottom diameter), because thanks to the folding legs, the stand will be "convenient" for dishes with a bottom diameter of 1.97 inches and 9.84 inches.!   After unfolding, the legs are fixed at a small angle to the horizon, ensuring reliable grip of the dish's bottom. When the load increases, the legs take a horizontal position, and the upper part of the stand's canvas diverges slightly outward around the entire circle, increasing the rigidity of the stand and the stability of the dish on it.   The new combustion chamber installed in the burner is significantly different from the old version: the quantity, diameter, and configuration of the air injection holes have been changed to improve the quality of the burning of the wood in the lower part of the chamber. These changes have eliminated the problem of clogging the chamber with smoldering coal and improved the burning of raw wood, thereby maximizing the adaptation of the burner to real field conditions, where dry wood is rare. In addition, the new version of the chamber ensures stable fuel burning in natural draft mode (with the booster disconnected from the burner) - this feature is very important for cooking dishes that do not require intense flame.   In this burner model, the combustion chamber has thicker walls and a larger volume compared to the chamber of the classic "Airwood BM" series turbo-burners. All chamber elements are made of highly corrosion-resistant stainless steel. The combustion chamber is assembled with the body in a rigid screw connection with the standard dimensions for the "Airwood BM" series turbo-burners.   The outer casing of the "Airwood Heavy Duty USB-h BM" burner has a closed bottom, which creates a sealed space between the two walls of the burner (between the combustion chamber and the casing), ensuring that all air from the air supply unit is directed into the combustion chamber. This means that there is no need to search for a flat surface to place the burner on, as it can even be used in a suspended state! Another advantage of the burner with a closed bottom casing is that after use on the ground, there are no burn marks left behind like with a bonfire. The bottom of this model is made of highly corrosion-resistant stainless steel.  To remove the ashes after use (once the burner has cooled), it is sufficient to remove the cooking stand and air supply unit from the burner and shake out the ashes from the combustion chamber by turning the burner upside down. Any remaining ash between the combustion chamber and the casing can easily be shaken out through the large opening on the side of the casing, to which the air supply unit is attached during burner operation.   In this model of the burner, the housing is equipped with a removable handle-holder that allows you to adjust the position or move the burner during its operation (burning). This feature will come in handy in case of sudden weather changes - you can quickly and safely move the burner to a more protected place in case of sudden rain or gusts of wind. Features: Metal material: stainless steel of various grades and thicknesses (0.01 in-0.03 in); Combustion chamber: resource: from 800 hours of burner operation depending on storage and operation conditions; volume 830ml; Dimensions: in the package: height 5.3 inches, diameter 4.7 inches; during use: height 6.9 inches, diameter from 4.7 inches to 6.3 inches; Total weight of the burner together with the cover, handle holder, and USB-DC cable - 1.2 lbs.  Package includes: 1.Burner housing assembled with bottom and high corrosion-resistant combustion chamber; 2. Reinforced heat-resistant folding stand for cookware; 3. Air supply unit with speed switch and DC connector 0.22 inches x 0.08 inches; 4. Detachable burner handle-grip; 5. USB-DC cable; 6. Strong waterproof "Oxford" fabric cover; 7. Instructions for use.

This burner model is specially designed for long-term use in harsh environmental conditions!  The solid fuel camping stove "Airwood Heavy Duty AA-H BM" will be a reliable companion for hikers who enjoy long trips (a month or more) in a marine, tropical climate, or other aggressive conditions for metal products. All connections of the dish bracket and combustion chamber are made with stainless steel fasteners. All of the most vulnerable burner components are made of highly corrosion-resistant stainless steel!  Thanks to the air supply block, the burner provides powerful heating even when using raw wood and quickly brings water to a boil. The boiling time for 0.26 US gal lqd of water is from 5 minutes, depending on the fuel quality and environmental  conditions.  The burner has a fuel combustion efficiency of up to 80% compared to the 5-7% efficiency of a regular fire. This is because about 90% of the particles in wood smoke are unburned due to lack of oxygen. When fresh air is supplied to certain areas of the burner's combustion chamber, these small particles burn. This is the principle behind this burner: cold air from the supply block enters the side opening at the bottom of the outer wall of the burner housing. Under the action of the fan, one part of the air is pressurized into the openings at the bottom and lower part of the combustion chamber, while the other is directed upwards between the walls of the combustion chamber and the housing, where it heats up and exits through special openings, entering the upper part of the combustion chamber, providing ignition of wood gas.  Intense tongues of flame are formed where the air exits, due to oxygen enrichment.  The burner can effortlessly prepare food (soup, porridge, tea, etc.) with a volume of up to 0.79 - 1.06 US gal lqd.  Branches, twigs, and any other available solid fuel can be used as fuel.  The air supply unit (blower) for the combustion chamber is equipped with a three-position switch with the following modes: Middle position - "Off" (the furnace operates in natural draft mode with the blower disconnected), Upper position - "High speed" (~ 3000 rpm) - for instant ignition and boiling of water, Lower position - "Low speed" (~ 2000 rpm) - for maintaining high-temperature flame.  The air supply unit, which comes with this burner model, is powered by two AA batteries or two AAA batteries ( with adapters for AAA batteries to AA batteries - included ). Continuous operation time of the unit from AA batteries: • in "High speed" mode: ~ 30 hours;  • in "Low speed" mode: ~ 50 hours;  The air supply unit is equipped with a motor shielded from thermal radiation and dust and moisture insulation at the IP55 protection level. This improvement allows the burner owner to use it in conditions of increased humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the motor will stall at the most inappropriate moment.  The burner comes with an updated version of a collapsible stand for cookware. This accessory has increased heat resistance and is specially designed for more stable placement on the burner of round pots (pans) with a wide bottom. The stand will appeal to fans of morning coffee in nature, prepared in a Turkish coffee pot (cookware with a small diameter bottom).   Thanks to the folding legs, the collapsible stand will be "convenient" for cookware with a bottom diameter of 5 cm and cookware with a bottom diameter of 25 cm! After unfolding, the legs are fixed at a certain angle to the horizon, thus ensuring a reliable grip of the cookware's bottom, and when the load is increased, the legs take a horizontal position, while the upper part of the stand's fabric slightly spreads outward around the entire circle, increasing the rigidity of the stand and stability of the cookware.  The new stand differs from the previous version by the presence of ventilation holes in the form of the manufacturer's brand name. This change reduced the total area of ventilation holes on the stand fabric, which improved the wind protection characteristics of the stand and increased the burner's power. In addition, the text on the stand allows distinguishing the original product from a copy right away. The height of the stand's fabric was also reduced, which increased the rigidity of the structure and improved the heating of the cookware's bottom.  A new combustion chamber installed in the burner significantly differs from the old version: the number, diameter, and configuration of air injection holes have been changed to improve the quality of wood burning in the lower part of the chamber. It was possible to eliminate clogging of the chamber with smoldering coals and improve the burning of raw wood, thus adapting the burner to real field conditions, where dry wood is scarce. In addition, the new version of the chamber allows for stable combustion of fuel in natural draft mode (with the booster block disconnected from the burner) - this feature is very important for cooking dishes that do not require intense flames.  In this burner model, the combustion chamber has thicker walls and a larger volume compared to the combustion chamber of the classic turbo burners of the "Airwood BM" series. All chamber elements are made of high corrosion-resistant stainless steel. The combustion chamber is rigidly assembled (screwed connection) with a housing that has standard dimensions for the "Airwood BM" series turbo burners.  The outer casing (body) of the "Airwood Heavy Duty AA-h BM" burner has a closed bottom, which creates a closed space between the two walls of the burner (between the combustion chamber and the body), meaning all air from the blower is guaranteed to be supplied to the combustion chamber. Thus, there is no need to search for a flat surface to place the burner, as this type of burner can even be used in a suspended state! Another advantage of the burner with a closed bottom of the body is that there are no burns left on the ground after its use, as after a bonfire. The bottom of this model is made of highly corrosion-resistant stainless steel.  In this model of the burner, the body is equipped with a removable handle-grip, which allows you to change the position (adjust) or move the burner during its operation (burning). This feature will come in handy in case of sudden weather changes - you can quickly and safely move the burner to a more protected place in case of sudden rain or wind gusts. Metal material: stainless steel of different grades and thicknesses (0.01 inch - 0.03 inch.); Features: Resource: up to 800 hours of burner operation depending on storage and use conditions; Volume: 28.0 fluid ounces; Dimensions: In the packaged state: height 5.31 inches, diameter 4.72 inches; During use: height 6.89 inches, diameter from 4.72 inches to 6.3 inches. Total weight of the burner together with the case, handle holder, batteries: 1.32 lbs. Package includes: 1. Burner assembly with bottom and high-corrosion-resistant combustion chamber; 2. Reinforced heat-resistant folding stand for cookware; 3. Air injection unit powered by two AA batteries; 4. Removable burner handle; 5.Strong waterproof "Oxford" fabric case; 6.Instructions for using the burner ; 7. Two adapters for AAA batteries to AA batteries.

  This model of solid fuel burner is specifically designed for prolonged use in harsh environmental conditions and is versatile in choosing the power supply for the forced air supply unit.   The solid fuel camping stove "Airwood Heavy Duty UP-h BM" will become a reliable companion for travelers who enjoy extended trips (a month or more) in marine, tropical climates or other aggressive environments for metal products. All connections of the stand for the dishes and combustion chamber are made with stainless steel fasteners. All the most vulnerable nodes of the burner are made of highly corrosion-resistant stainless steel! The forced air supply unit of the "Airwood Heavy Duty UP-h BM" stove can be powered by batteries, Power Bank, solar panel with built-in battery or a smartphone connected via an OTG cable."   Thanks to the air pressure unit, the solid fuel camping stove "Airwood Heavy Duty UP-h BM" provides powerful heating even when using wet wood and quickly brings water to a boil. The boiling time for 0.26 US gal lqd of water is about 5 minutes, depending on the quality of the fuel and environmental conditions.   The stove has a fuel combustion efficiency of up to 80%, unlike the 5-7% efficiency of a regular campfire. This is because about 90% of the particles in the smoke from the wood are unburned due to the lack of oxygen. When fresh air is supplied to certain areas of the stove's combustion chamber, these fine particles burn. This is how this stove is built: cold air from the pressure unit enters through a side opening in the lower part of the outer wall of the stove's body. Under the action of the fan, one part of the air is pressurized into the openings of the bottom and lower part of the combustion chamber, while the other is directed upwards, between the walls of the combustion chamber and the body, where it heats up and exits through special openings, entering the upper part of the combustion chamber and igniting the wood gas.   Intense flames are formed where air is released, due to oxygen enrichment.   You can easily cook food (soup, porridge, tea, etc.) on the stove, up to a volume of 0.79 - 1.06 US gal lqd.   Branches, twigs, bark, and any other available solid fuel can be used as fuel.   The air injection block (blower) in the combustion chamber is equipped with a three-position switch with the following modes: Middle position - "Off" (the stove operates in natural draft mode with the blower disconnected), Upper position - "High speed" (~ 3000 rpm) - for instant ignition and boiling of water, Lower position - "Low speed" (~ 2000 rpm) - to maintain high-temperature flames.      The air injection block included with this burner model is universal in power source selection: it can be powered by two AA or two AAA batteries (with adapters for AAA batteries to AA batteries - included), or any other power source with a 5-volt DC output and a USB or DC 0.2 inch x 0.08 inch plug. For example, this can be a power bank, a solar panel with a built-in battery, or a smartphone connected via an OTG cable. When an external power source is connected to the DC jack of the blower block (via the "USB-DC" cable included in the kit), the battery compartment in the blower block is automatically disconnected.        Continuous operation time of the block with AA batteries: • in "High speed" mode: ~ 30 hours; • in "Low speed" mode: ~ 50 hours;        The current consumed by the blower block (depending on the power source): • in "High speed" mode: 70-100mA; • in "Low speed" mode: 30-50mA.       The air supply block is equipped with a motor that has thermal radiation shielding and dust and moisture insulation at the IP55 protection class level. This improvement allows the owner of the burner to use it in conditions of high humidity or dustiness (tropics, rain, desert, beach, etc.) without fear that the motor will fail at the most inappropriate moment.       The burner is equipped with an updated version of a folding stand for cookware. This accessory has increased heat resistance and is specially designed for more stable placement on the burner of round pots (pans) with a wide base. The stand will also be appreciated by fans of morning coffee in nature, prepared in a Turkish coffee pot (a vessel with a small diameter bottom).       Thanks to the folding legs, the folding stand will be "convenient" for both cookware with a 2 inch diameter bottom and cookware with a 10 inch diameter bottom! After the legs are unfolded, they are fixed at a certain angle to the horizon, thereby ensuring a reliable grip of the cookware's bottom. When the load is increased, the legs take on a horizontal position, and the upper part of the stand's canvas slightly diverges outward around the entire circumference, increasing the rigidity of the stand and the stability of the cookware.       The new stand differs from the previous version also by the presence of ventilation holes in the form of the manufacturer's brand name. This change reduced the total area of ventilation holes on the stand's canvas, which improved the wind protection characteristics of the stand and increased the burner's power. In addition, the writing on the stand allows distinguishing the original product from a copy immediately. The height of the stand's canvas was also reduced, which increased the stiffness of the structure and improved the heating of the cookware's bottom.       A new combustion chamber installed in the burner significantly differs from the old version: the number, diameter, and configuration of air injection holes have been changed to improve the quality of wood burning in the lower part of the chamber. The changes have successfully eliminated the clogging of the chamber with smoldering charcoal and improved the burning of raw wood, thus maximizing the burner's adaptation to real camping conditions, where dry wood is scarce. In addition, the new version of the chamber ensures stable fuel burning in natural draft mode (with the blower disconnected) - this feature is essential for cooking dishes that do not require intense flames.   In this burner model, the combustion chamber has thicker walls and a larger volume compared to the chamber of classic "Airwood BM" turbo burners. All chamber elements are made of highly corrosion-resistant stainless steel. The combustion chamber is rigidly assembled (screwed) with a housing that has standard dimensions for "Airwood BM" turbo burners.   The external casing (housing) of the "Airwood Heavy Duty UP-h BM" burner has a closed bottom, which creates a sealed space between two burner walls (between the combustion chamber and the housing), ensuring that all air from the blower is supplied to the combustion chamber. Thus, there is no need to look for a flat surface to place the burner, as this burner model can even be used in a suspended position! Another advantage of a burner with a housing bottom is that it does not leave burns on the ground after use, as with bonfires. The bottom of this model is made of highly corrosion-resistant stainless steel.   In this burner model, the housing is equipped with a removable handle holder, allowing you to change the position (adjust) or move the burner during operation (burning). This feature comes in handy in case of sudden weather changes - you can quickly and safely move the burner to a more sheltered location in case of sudden rain or wind gusts. Features: Metal material: stainless steel of various grades and thicknesses (0.01 inch - 0.03 inch); Combustion chamber: Resource: up to 800 hours of burner operation depending on storage and usage conditions; Volume 28 us fl oz; Dimensions: In packaged state: height 5.1 inch, diameter 4.7 inch; During use: height 6.7 inch, diameter from 4.7 inch to 6.3 inch; Total weight of burner with case, handle, batteries, and USB-DC cable - 1.37 lbs. Package includes: 1. Burner assembly with bottom and high-corrosion-resistant combustion chamber; 2. Reinforced heat-resistant folding stand for cookware; 3. Air supply unit powered by two AA batteries and a DC connector (0.2 inch*0.08 inch); 4. Removable handle for burner; 5. USB-DC cable; 6. Durable waterproof "Oxford" fabric case; 7. Recommendations for using the burner; 8. Two adapters for AAA batteries to AA batteries.

Air circulation inside the mini-greenhouse is very important for plants. Specially designed fans for mini-greenhouses make possible quick installation on a metal frame with a diameter of 12 mm. With the help of a quick-release plastic bracket, you can install them in any part of the greenhouse and adjust the angle of inclination from 90 to 180 degrees. Mini-greenhouse coolers have sufficient speed for good air circulation and control of humidity level inside. The optimal speed of fan rotation is selected for the most comfortable noise level for people - it is almost soundless. The power connection system makes it possible to connect ventilators to our mini-greenhouses quickly and without additional wires. Our fans will be very useful for your plants. About this item • Three built-in fans provide air circulation with speed up to 4000 rpm. and don’t make any noise in the same time • Grow fans have all the necessary wires for connection with Sezam XL indoor mini greenhouse for plant care and germination. • Plant fans has a good and quality design: quality bearing, pure copper wire, resistant to high temperatures. • They have fasteners that ensure quick installation on the frame tube of a mini greenhouse with a pipe diameter of 12 mm. • Indoor grow fans are additionally treated with hot glue for better moisture resistance and this is a plus if you are going to use a humidifier inside the mini greenhouse.