Home & Hobby

audio cassette player Elektronika used no working

Audio tubes for amplifiers used

Automatic staircase lighting system SmartStairway SS-26LCD PRO Allows you to create lighting using LED light sources with a current of up to 5A per channel from 4 to 26 steps with automatic activation. The controller is designed to work with monochrome (single-color) LED strips and lamps with a supply voltage of 12 or 24V DC and a power of not more than 5A for each of the steps (for a voltage of 12V, the maximum allowable power is 60W per channel, and for a voltage of 24V - not more than 120W for each channel). Luminaires and LED strips must PWM dimming, otherwise they may flicker at low brightness values. As a rule, the vast majority of LED strips are well dimmable, but still check this parameter with the seller of LED strips. If you want to create multi-color backlighting using analog RGB LED strips, use the optional SmartStairway APS-21 RGB Inverter Amplifier. The controller allows you to create static lighting steps with a smooth successive switching on of steps one by one in the direction of movement of a person (from the entrance to the exit) or from both sides, if the entrance to the stairs is made from two sides at once. In standby mode, you can get emergency lighting for the first and last steps by setting their brightness from 0 to 100%. Accordingly, if you set the brightness value to 0%, the first and last steps will be turned off in standby mode. •   You can connect a digital light level sensor to the system, which is included in all kits except for the “minimum” kit. This sensor does not have a housing and has a compact size. It can be mounted under any decor elements of the stairs, it is necessary to leave only a hole with a diameter of 5 mm for the photosensitive element. The sensor has a trimming resistor that will allow you to adjust the required brightness level at which the system starts to work. Provides day/night operation. If you do not need it, you can simply deactivate the sensor in the settings menu. • The system allows you to create interactive lighting stairs with 4 to 26 steps with one entrance and exit. (i.e. one flight of stairs (staircase)) You can connect a digital light level sensor to the system, which is included in all kits except for the “minimum” kit. This sensor does not have a housing and has a compact size. It can be mounted under any decor elements of the stairs, it is necessary to leave only a hole with a diameter of 5 mm for the photosensitive element. The sensor has a trimming resistor that will allow you to adjust the required brightness level at which the system starts to work. Provides day/night operation. If you do not need it, you can simply deactivate the sensor in the settings menu. • The system can work with three types of sensors in any combination: Pyroelectric sensor. Detects the movement of warm objects at a distance of up to 7 meters. Ultrasonic rangefinders. Detects an obstacle at a distance of up to 1.2m. Based on the principle of a reflected sound signal. Infrared NPN obstacle sensors. They detect an obstacle at a distance of up to 0.8 m. Based on the principle of a reflected infrared beam. At rest, they give a logical unit - a high signal. When an obstacle is detected - a logical zero (low signal). This is the most practical sensor, since this principle almost completely eliminates possible false alarms, errors in the choice of wires and the occurrence of induction currents in incorrectly selected and laid wires. The system is configured using buttons and a two-line character display. It also displays information about the status of the system and the distance values measured by ultrasonic sensors. The setting is carried out using an intuitive interface of the settings menu and the selection of values by mechanical buttons. For your convenience, we have created a short video tutorial on connecting and configuring, the link to which you will find below. You can also read more about connecting and configuring the system in the user manual, the link to which is available below. Download: User Manual (English, PDF 13MB):URL:  shop.xopc.net.ua/files/pasport-ss26LCDZ104_ENG_2023.pdf Kits include: All kits do not include LED light sources, power supplies, wires and other associated materials, the number, power and parameters of which depend on your staircase, its dimensions, number of steps and the configuration of the entrance and exit. PIR KIT - SmartStairway SS-26 LCD PRO controller - 1 pc. - Pyroelectric motion sensor SmartStairway PIR-SR501-1 - 2 pcs - Unpackaged TTL light level sensor - 1 pc. - user manual - 1 pc. Ultasonic Kit - SmartStairway SS-26 LCD PRO controller - 1 pc. - Ultrasonic distance sensor SmartStairway US-042 - 2 pcs - Unpackaged TTL light level sensor - 1 pc. - user manual - 1 pc. "IR KIT" - SmartStairway SS-26 LCD PRO controller - 1 pc. - infrared obstacle sensor E18-D80NK - 2 pcs - Unpackaged TTL light level sensor - 1 pc. - user manual - 1 pc. "Mixed Kit" - SmartStairway SS-26 LCD PRO controller - 1 pc. - Pyroelectric motion sensor SmartStairway PIR-SR501-1 - 1 pc. - Ultrasonic distance sensor SmartStairway US-042 - 1 pc. - Unpackaged TTL light level sensor - 1 pc. - user manual - 1 pc. "Minimal" - SmartStairway SS-26 LCD PRO controller - 1 pc. - user manual - 1 pc. No sensors are included in the minimum kit. The main elements   - Button to enter the settings "Setup" - Up button. In standby mode, activates the staircase light from top to bottom. In setting mode, increases the setting. - Down button. In standby mode, activates the staircase light from bottom to top. In setting mode, decreases the parameter. - Terminal for connecting "+" from a DC12V or DC24V power source. - Terminal for connecting "-" (Ground) from a DC12V or DC24V power source. - Terminal for connecting “Digital Output (DO)” from a light level sensor - Terminal for connecting the "Triger" of the lower ultrasonic sensor or "Data" of the pyroelectric, infrared or microwave sensors - Terminal for connecting “Echo” of the lower ultrasonic sensor, not used for other types of sensors. - Terminal for connecting the "Triger" of the upper ultrasonic sensor or "Data" of the pyroelectric, infrared or microwave sensors - Terminal for connecting “Echo” of the upper ultrasonic sensor, not used for other types of sensors. - Terminal for connecting the upper push button (non-latching button). - Terminal for connecting the lower button for forced activation (momentary button). - Stabilized voltage output terminal +5V for connecting the power supply of sensors and buttons. Max. Current strength 0.5A. - Terminal for connecting "-" LED strip or first step lamp. Max. 5A. - Terminal for connecting "-" LED strip or step lamp number 2 ... 25. Max. 5A for each of them. - Terminal for connecting "-" LED strip or lamp of the last step. Max. 5A. Specifications. Dimensions and mount: Supply voltage: 139 х 89 х 65 mm, DIN-rail (8-DIN) DC 12 / 24V  Power consumption in standby mode: no more than 3W. Average consumption in the operating mode of the backlight on: no more than 7 W. Built-in power stabilizer voltage and power: DC5V, 0.5A (protected by self-healing fuse) Compatible sensors: Pyroelectric HC-SR501, HC-SR505,  Ultrasonic HC-SR04, Infrared obstacle sensors NPN, Microwave rcwl-0516 and others similar in terms of power and level TTL signal. Compatible LED strips: DC 12 / 2 4 V analogues PWM dimmable . Number of steps: from 4 to 2 6 pcs. Maximum load power per channel: 5 A /channel (with a load of 12V - 60W, with a load of 24V - 120W.)   The choice of sensors and their differences. Pyroelectric sensor. The controller can work with pyroelectric sensors or ultrasonic rangefinders in any combination. Pyroelectric sensors are easy to install and connect, do not require additional settings. They determine the movement of objects, the temperature of which is 10 degrees or more higher than the temperature of the surrounding objects. They can detect movement up to 5 meters away. The angle of view of the sensors is approximately 45-50 degrees (for more details, see the diagram in the user manual). The sensors are not demanding on the choice of installation location and can be installed near the floor or steps. This type of sensor is preferred if your staircase allows it. Ultrasonic sensor. An ultrasonic sensor is a rangefinder that measures the distance to an obstacle. Its principle of operation is based on the emission of an ultrasonic signal, which, after being reflected from an obstacle, returns to the sensor. The controller calculates the distance to the obstacle based on the speed of sound and the signal return time. Compares it with the value that you have written into memory and if the measured distance is less - turns on the light. The maximum distance for detecting obstacles is 1.2m (47 "). The principle of operation of ultrasonic sensors has some technological disadvantages: - the sound is not reflected from the sound-absorbing surfaces. The sensor will not see soft sound-absorbing objects - the speed of sound depends on temperature and atmospheric pressure, therefore, when this parameter is changed, the distance value may slightly change. - The angle of propagation of the sound wave is approximately 45-60 degrees (see the diagram in the user manual for more details). Therefore, it is important to choose the right location for the sensor. It should not be located close to the floor or a step, as if it is close to the side surface, the sensor will measure the distance to this surface, and not to an obstacle on the stairs. Therefore, it is recommended to install the sensor at least  50 cm  from the floor or step. - Ultrasonic rangefinders are high-frequency devices operating at a frequency of more than 400 kHz. Therefore, use shielded wires no longer than 10m ( 32 feet ) to connect them.   Infrared obstacle sensors. This type of sensor provides obstacle detection at a distance of 3 to 80 cm. The distance is adjusted using a multi-turn trimmer and has an LED indicating obstacle detection. It works on the principle of reflected infrared beam. So, for example, you can set the distance, for example, 70 cm, and the sensor will be triggered if the distance to the obstacle is less than the set distance. At the same time, the sensor will not see any obstacles further away. The special feature of this sensor is its NPN output. That is, when an obstacle is detected, the sensor outputs a logical zero (low signal), the rest of the time, when there is no obstacle, it provides a logical unit (high signal) at the output. This is very useful if the wires are long enough and if induced currents from other electrical appliances or wires can occur in these wires. It will not give false inclusions while doing so. This is the best type of sensor for stairways without railings or if the sensor is directed into walkways. It is more practical than ultrasonic sensor. Shielded wires must be used for all types of sensors. In this case, the shield of the wire should be connected to "GND" of the power supply. This will protect the system from electromagnetic interference and inductive pickup. Since any wire is an antenna, it collects inductive interference from other electrical devices in your home. Failure to comply with this rule can lead to erroneous switching on of the system due to inductive currents in the wires. Work algorithm. The controller provides automatic lighting of stairs with 4 to 26 steps with one entrance and exit. In standby mode, the first step and the last step are on in low brightness mode, or you can turn them off. The brightness of the on-duty steps can be adjusted from 0 to 100% The entrance and exit can be equipped with a sensor suitable for your ladder and its configuration and (or) a switch button (not included). When triggered, the controller will start smooth and sequential activation in the direction from the triggered sensor (or button) to the opposite one. You can adjust the turn-on speed, and the overall brightness of all steps. If the sensor on the other side is triggered, the controller will start switching on the steps in the opposite direction.  After all steps are fully enabled, the controller waits for the time you specified before switching off. This time can be set in 5 second increments. The minimum waiting time is 5 seconds. If during this time at least one sensor works again (someone re-enters the stairs), the timer will restart and the waiting time will start again.  After the specified time has elapsed, the controller will smoothly and sequentially turn off the steps in the opposite direction. The switch-off speed is always 2 times higher than the switch-on speed in order to save energy, since after a person leaves the stairs there is no need to light the stairs. Description of the operation of the light sensor.   A digital light level sensor can be connected to the controller, which will allow you to turn off the system during daylight hours (day / night mode). The light level is adjusted by the user at will using a trimming resistor on the sensor. Unlike the younger model of the SS-26 controller, it does not matter where you install the sensor, the light from the steps no longer interferes with it. Now the sensor stops being interrogated after the start of switching on and will not lead to turning off the steps after the start of switching it on. Now you can install the sensor directly on the stairs. This is made possible by a new algorithm and a more powerful controller processor. Read in detail in the user manual and watch the video tutorial on connection and setup. Comparative table of controllers for stair lighting.       SmartStairway SS-26   SmartStairway SS-26 LCD   SmartStairway SS-26 Pro   SmartStairway  SS-281X Wi-Fi  Central processor  ATmega168, 8 mHz, SRAM 1kBt, EEPROM 512Bt, RAM 16kBt  ATmega328, 16mHz, SRAM 1kBt, EEPROM 512Bt, RAM 32kBt  ATmega328p, 16mHz, SRAM 1kBt, EEPROM 512Bt, RAM 32kBt XTensa LX6 32-bit, 2 core, 240mHz, 448KB ROM 520KB SRAM  Wireless connection -   -  - + WiFi: 802.11 Supply voltage  DC 12-24V DC 12-24V DC 12-24V DC 5-12V  Settings interface LED on the case. 3 buttons, indication using the first 4 steps  3 buttons, display indication, demo.   3 buttons, display indication, demo.   With the of the WEB-interface of the device connected to the controller with the of the WEB-browser. LED on the case. 2 touch buttons for forcing the stairs on/off.  Number of steps from the 4th to the 26th  from the 4th to the 26th  from the 4th to the 26th  to the 32nd   Type of light source LED tape, LED lights. That PWM dimming  LED tape, LED lights. That  PWM dimming   LED tape, LED lights. That  PWM dimming   Addressable LED RGB SMART tape of Neopixe, WS2811, WS2812 and similar types Maximum load power for 1 channel 0.4A (4.8W at 12V and 9.6W at 24V light sources) 0.4A (4.8W at 12V and 9.6W at 24V light sources) 5A (60W at 12V and 120W at 24V light sources) The parameter is not valid. Protection of digital inputs from connection errors. - Current protection Current protection in + ESD protection against electrostatic discharge. Current protection  Color of light Monochrome. (it is possible to use RGB only under the conditions of using an additional amplifier with a built-in RGB controller SmartStairway APS21-RGB) Monochrome.  (it is possible to use RGB only under the conditions of using an additional amplifier with a built-in RGB controller SmartStairway APS21-RGB)  Monochrome.  (it is possible to use RGB only under the conditions of using an additional amplifier with a built-in RGB controller SmartStairway APS21-RGB)  Multi-color RGB SMART where the color and brightness of each individual LED or module of 3 LEDs is set (depending on the tape). Type of compatible sensors PIR - pyroelectric PNP (logical 1 when motion is detected) Ultrasonic - ultrasonic distance meters. Microwave - PNP movement sensors based on the Doppler effect PIR - pyroelectric PNP (logical 1 when motion is detected) Ultrasonic - ultrasonic distance meters. Microwave - PNP movement sensors based on the Doppler effect IR-infrared NPN distance sensors on the reflected beam with logic 0 when obstacles are detected PIR - pyroelectric PNP (logical 1 when motion is detected) Ultrasonic - ultrasonic distance meters. Microwave - PNP movement sensors based on the Doppler effect IR-infrared NPN distance sensors on the reflected beam with logic 0 when obstacles are detected    PIR - pyroelectric PNP (logical 1 when motion is detected) Ultrasonic - ultrasonic distance meters. Microwave - PNP movement sensors based on the Doppler effect  Indoor light level sensor compatible. Yes . Day/night mode (switching off when the light level is above the set threshold. Requires installing the sensor so that the light from the stairs does not fall on it) Yes . Day/night mode (switching off when the light level is above the set threshold. The light level sensor can be installed directly on the stairs, when the light on the stairs is turned on, the sensor is blocked and does not lead to unwanted shutdown of the stairs)  Yes . Day/night mode (switching off when the light level is above the set threshold. The light level sensor can be installed directly on the stairs, when the light on the stairs is turned on, the sensor is blocked and does not lead to unwanted shutdown of the stairs)   Yes.  Day/night mode and adaptive mode. It can change the brightness of the light on the steps depending on the level of illumination, which prevents blinding in the dark. All parameters are adjusted according to the user's wishes.   Illumination of the first and last steps in standby mode. Yes. Brightness is adjustable from 0 to 100%.  Yes. Brightness is adjustable from 0 to 100%.  Yes. Brightness is adjustable from 0 to 100%.  Yes. There are static and many dynamic modes of lighting the stairs while waiting. Both the first and last steps, as well as the extreme LEDs of each step, or signal dynamic lights on the steps in animated modes can be turned on.  Setting the general brightness of the stairs.  Yes. From 20% to 100%  Yes. From 20% to 100%  Yes. From 20% to 100%  Yes. Also, thanks to the adaptive mode, it can automatically change depending on the level of illumination in the room.      Contact us We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase. Payment Shipping The dispatch of the goods is carried out within 1-5 days by a small registered package by airmail with tracking. The parcel may not be tracked in  Ireland, the United Kingdom and Germany. This is due to the fact that the abovementioned countries do not track small registered packets. You can get information about the location of the parcel in these countries by submitting a request to the local postal service Delivery time takes from 14 to 45 working days, depending on the country. Most countries in Europe, the United States delivery an average of 14 to 35 days. The countries of Asia, Middle East, Africa, Central and South America averaged from 21 to 45 days. *** The declared customs value of the goods cannot be reduced, as this violates eBay rules and laws. Depending on the customs laws of your country, you may have to pay additional taxes and customs fees. For details on customs limits and duties, check with your customs office. According to eBay rules, the buyer must pay all additional taxes and duties required by the law of your country. Please consider this when placing your order. Shipping to Australia and Canada is only possible with UPS. In this case, the  buyer must pay all statutory taxes and fees. UPS may require a Buyer ID number for this. Be sure to include your contact phone number. International economy shipping is carried out by small registered airmail package "Registered Mail® International". In many countries around the world, this type of delivery requires hand-to-hand delivery and may require a signature. Please consider this when purchasing. Parcels can be stored from 14 days to 2 months at the local post office, after which they can be disposed of or sent back. Parcel retention time after unsuccessful delivery depends on the regulations of the postal service of your country. Check with your local post office for details. The recipient can usually extend the shelf life of the parcel, request re-delivery or readdressing. To do this, contact your local postal service.   Return and warranty conditions Return of goods is accepted within 30 calendar days. Items must be returned in original condition with tags if applicable within 30 days of purchase. Return shipping at the same time pays the buyer.In case of product failure during the warranty period, free repair of the product is possible. The cost of delivery is paid by the buyer. Damage caused by incorrect operation, connection or violation of technical requirements are not warranty cases. Such repairs are carried out on a paid basis. Return of goods damaged as a result of violations of the rules of connection and operation is not accepted.

The new automation model PERVAK 4.0 is a new device with expanded functionality. 1. The built-in barometer automatically adjusts the set temperature shelf for product selection, depending on changes in atmospheric pressure, which allows, during the rectification process, which can last more than ten hours, to set the minimum size of the shelf to improve the quality of the product.              When the atmospheric pressure changes during the rectification process, the automation will correct the temperature shelf in accordance with the pressure changes.   2. Tailings extraction valve. An additional valve allows you to select tail fractions during the rectification process using a tails collection unit. (The tailings selection unit is not included in the automation delivery set) Accordingly, the tailings selection valve installed on the lower selection unit will select the tailing fractions (unload the column or MMC) at a speed specified by the operator when a certain temperature in the cube is reached. You can, for example, start collecting tailings at a rate of 200 ml per hour when the temperature in the cube reaches 90C. In order for the tailings selection valve not to work, the tailings selection temperature must be left at “100” 3. Decrement of the king. Reducing the amount of selection when the temperature in the drawer increases (green sensor) by a given amount. This feature is especially important for tray column distillations, as we know that start-stop operation is not optimal when operating on tray columns. After switching from the head selection mode to the body selection mode, the automation records the temperature of the green sensor and, as the temperature rises by every degree, reduces the selection speed by the required amount. In order not to reduce the selection speed, it is necessary to leave the value “Decrease by side” at “0” 4. Ability to change the direction of heads. We have added a “Heads down” or “Heads to the side” switch, which allows you to change the direction of the selection of heads and also allows you to install a head valve on the hanging parrot. Then, when selecting heads, the valve will be open and the heads will flow down, after switching to body selection, the valve will close and the parrot’s filling field, the body will be taken into the body selection tank. 5. Emergency stop button on the main screen. Also in model 4.0 all the functionality of the automation model of model 2.6 is implemented   Liters per hour - the ability to select in % or convert to the usual liters per hour.   Two working powers of the head + body - now you can set different heating power for the selection of heads and for the selection of the body.   Selection of goals by level/time. Knowing the number of heads and the selection speed, you can select heads either by a level sensor or by a given time.   Temperature graphs - Ability to monitor temperatures and system logs during any process.   Ability to receive Push notifications on your smartphone. To activate the Function, you need to download a new version of the application for iOS or Android, having previously deleted the old one.   Checking valves - In the settings, you can click the check valves button and check the functionality of all valves by running the test mode.   We swapped the heads and body - now in the head/body switching unit the heads flow downwards, the body to the side.   Added the ability to change the direction of HEAD-BODY selection, now heads can be directed either to the side or down.   We added a kilowatt hour counter, now in the Data-Statistics tab you can see how much electricity the system has consumed in real time.   Pervak 4.0 automation with a web interface is a new generation controller. With the of automation for rectification, you can fully automate the processes of distilling mash into raw, automation of rectification, automation of brewing, automation of mashing. Automation for rectification allows you to control all processes remotely, from a smartphone or computer, using an application or web interface.   Basic operating modes of automation for moonshine brewing:   - Distillation (processing mash into raw in potstill mode)   - Rectification   - Mashing or brewing beer (up to 10 temperature pauses and cooling with a chiller)   - In manual mode, automatic rectification can be used to control the following processes: Heating element power adjustment, Precise temperature maintenance in PID mode, Emergency stop of the system due to water flow, cube overheating and TSA temperature increase, Precise control of the selection speed and control of selection valves, heads and supply of cooling water, Temperature control in the cube, drawer, selection unit and TSA.   Automation for distillation, rectification and mashing allows you to fully automate the process of distilling mash into raw, the rectification process, the process of brewing beer and mashing grains for whiskey and bourbon.   The Wi-Fi module provides you with complete control and management of all automatic distillation processes. All you need is to connect the controller to a stable source of Internet connection and have access to the network on your smartphone.   Information synchronization time is 15 seconds.   When using the Pervak Application browser, you can receive push notifications about automation processes and errors.   The automation is designed to control heating elements or electric stoves with a power of up to 3.5 kW, which is quite enough for most processes carried out at home.   For ease of use, the controller is equipped with a DIN rail for wall mounting.   The delivery set of Automation for Distillation, Rectification and Mashing with Pervak 4.0 Wi-Fi barometer includes:   Automation with touch screen 1 pc.   Block dimensions Height 70 mm; Width 140 mm; Length 220 mm   Solenoid valve 3 pcs. Cable length 2 meters   Temperature sensor 4 pcs. Cable length 2 meters   Level sensor 1 pc. Cable length 2 meters   Tee for head valve for 10 mm hose. 1 PC.   Tee for water temperature sensor 1 pc.   Quick release 0.25 for 10 mm hose 6 pcs.   Nipple for thermometer sensor 1 pc.   Attention, Paper instructions are not included in the package, instructions are available in the “instructions” section of this product!   Operating modes   In Manual mode you can:   - manually turn on and off the heating element or electric stove   - adjust the power of the heating element   - maintain accurate temperature in PID control mode   - open and close the water supply valve   - open and close the extraction valve   -set temperature, hysteresis and sampling rate as a percentage   - set the Emergency mode for water, level and cube temperature   In Distillation mode you can set:   - acceleration power   - selection power   - temperature of transition from maximum power to extraction   - stop temperature   - water accident temperature   In Rectification mode you can specify:   - acceleration power   - work power   - operating temperature (in the drawer)   - stop temperature per cube   - temperature of head selection (set automatically after stabilization of the column)   - goal selection hysteresis   - body selection hysteresis   - speed of goal selection   - body selection speed   - water accident temperature   - column stabilization time   - number of start-stop cycles   - reducing the selection, upon reaching a certain temperature in the cube, to maintain the reflux ratio. In the Mashing mode you can:   - indicate the number of temperature pauses   - turn cooking on or off   - turn cooling on or off   - for each pause you can select the temperature, hysteresis and pause time   - select boiling temperature   - set the power of the heating element   - select cooking time   - indicate temperature and cooling hysteresis   Additionally, as options for Pervak 4.0 automation with a web interface, you can order:   - Adapter   - Nipple 10 mm     - Long temperature sensor for mashing

Boho nursery mobile, Baby crib mobile , Rainbow baby decor

Изображение кота-Кошка мяуканье Узор из бисера Бисер: Preciosa Rocialles 11/0, 19 цветов. Столбцы: 60/3,13 Строки: 49/4,13. Данная схема состоит из: 1. Изображения готовой работы. 2.Легенда из бисера с указанием цвета, количества и количества бисерин. 3. Словарный чат с указанием рядов и порядка работы с бисером.

Crochet Cupcake with Bee wings and fruit, pattern PDF. !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! A very quick and easy crochet project! These lovely Bee cupcake will be a cute Bee patty decor, Baby shower, Decor for your home, a great handmade gift for kids. This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description. Size approx. 3 1/5" (8 cm.). You will need: - cotton or cotton blend yarn ( YarnArt Jeans), 4ply. - hook B (2 mm.) - polyester fiberfill - needle, scissors Happy crocheting! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

This is a pattern for adorable crochet BEETROOT. You will love to crochet beetroot leaves! Such a crochet beetroot will be a great educational toy for a baby. Just crochet and enjoy :) *This listing is a PDF DIGITAL CROCHET PATTERN that you can download once payment has cleared and not an actual finished item* This easy-to-follow pattern with detailed instructions also includes 27 step by step pictures on 13 pages. Skill level: Easy Feel free to message me if you are having any trouble understanding pattern, I will be happy to support! :) Finished beet measures about: Diametr - 2,75" (7 cm ) Length - 7,9" (20 cm ) Hope you will enjoy crocheting this beet as much as i did! :) Oh yeah! Also small gift is waiting for you inside :) You can see it in the last photo! Thank you for your visit P.S. Favourite this item to be sure you will not lose it ;) Please visit also my other VEGGIES and FRUIS crochet pattern: https://lavky.com/mommys-bunny...

This is tasty bright bell paper crochet pattern. It looks absolutely gorgeous when tied in a long bun and hung on the wall. Crochet amigurumi fruit and vegetables can be played in a various ways - teething, pretend food, grocery shopping or a perfect gift.. Or keep it for yourself as cute decor. It is sure to be a great addition! *This listing is a PDF DIGITAL CROCHET PATTERN that you can download once payment has cleared and not an actual finished item* This easy-to-follow pattern with detailed instructions also includes 37 step by step pictures on 13 pages. Also you can make bell pepper of two options: ribbed or smooth. Skill level: Easy Feel free to message me if you are having any trouble understanding pattern, I will be happy to help! :) Finished bell pepper measures about: Hight -3,5" (9 cm ) Diameter - 2,9" (7,5 cm) Hope you will enjoy crocheting this bell pepper as much as i did! :) Oh yeah! Also small gift is waiting for you inside :) You can see it in the last photo! Thank you for your visit! P.S. Favorite this item to be sure you will not lose it ;) Please visit also my other food crochet pattern: BELL PEPPER Crochet Pattern - Crochet Paprika pattern. Amigurumi bell pepper pattern. Veggie pattern

Cute amigurumi Birthday Frog with hat and balloon. Pattern PDF. !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! A very quick and easy Holidays Project!. Attach a Keyring to it and convert it to a cute Keychain! This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. Size approx. 3 1/2" (9 cm.) You will need: - cotton blend yarn ( YarnArt Jeans) - hook B (2 mm.) - safety eyes 10 mm. - polyester fiberfill - metal key ring - needle, scissors You are free to sell the finished item made from this pattern. PATTERN CAN"T BE SOLD!!! Happy crocheting!!! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Since 1990, the NUMAN black-and-white TV receiver has been produced by the Television Plant named after the 50th anniversary of the USSR. Soviet USSR Vintage Small TV NUMAN 31TB TV - Made in USSR Working Vintage TV The TV has a number of automatic adjustments to ensure high picture quality. The TV has a built-in telescopic antenna. Power supply from the expected or expected current network. The TV body is made of impact-resistant polystyrene in various colors. See photos and condition description. Great vintage item for collection or decoration.

Sampler cross stitch pattern - a bookmark with a fairytale house under a large tree, a round green door is the entrance to the halfling's house from the movie. The pattern is simple and modern, easy and fast to embroider. Great handmade holiday gift. Every book lover will appreciate this bookmark. The diagrams are prepared for instant download in PDF format. Fabric: 16 count  White Aida Stitches: 27 x 112 Size: 1.69 x 7.00 inches or 4.29 x 17.78 cm Colours: 21 (DMC) This PDF pattern Includes: - Pattern in black and white symbol on 1 and 2 pages, - Pattern in color blocks and symbols on 1 and 2 pages, - Pattern in color blocks and symbols without backstitch on 2 pages, - List of DMC colors you will need. ATTENTION! For personal use only! All my patterns are not for commercial using. You may not resold files as is, or with minor changes. The product may not be used in any way whatsoever in which you charge money, collect fees, or receive any form of remuneration. Also the representation on any free web resource is prohibited. Please understand me as the owner. Please note this is a PDF PATTERN ONLY! No fabric, floss, or other materials are included in the listing. If you have any questions about the purchased product, individual order of cross-stitch patterns, downloading files in PDF format - write to me in a private message  If you need to know the size of the fabric when using: Aida 6, Aida 11, Aida 14, Aida 16, Aida 18, Aida 22, Aida 25, Aida 28, Aida 32 - try visiting the special "Fabric Size Calculator" at: https://www.cyberstitchers.com... ♥ LINK TO SIMILAR DISCOUNTED PRODUCTS ♥ https://www.etsy.com/shop/Auth... To open this files you will need Adobe Reader, which can be downloaded here for free: https://acrobat.adobe.com/us/e... I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order.

Wooden Card Box,Deck box. Stylish wooden box Wooden box for poker cards Internal Dimensions: 64mm x 24mm x 93mm / 2.51 "x 0.94" x 3.66 " A box for keeping your card will protect them from deterioration and will help to keep them in order. Now you don’t need to spend a plenty of time for card searching. Keep your deck of cards at one, comfortable for you place. Playing with your friends will be much easier and faster when you have a card organizer by your hand! Item is made of wood.  The box has comfortable shape and smooth surface so it’s nice to have it in your hands. Surprise the ones you love with simple but original present.  The box is decorated with inlaid metalized gold cardboard.  The walls of the box are decorated with leather straps The tabletop poker card holder will decorate your home in style The box does not close ORDER PROCESS: 1) Choose color in variation list 2) Write your text and chosen font in personalization box 3) Add item to your cart 4) Submit payment 5) You receive your order in Estimated delivery time The time we need to prepare an order for shipping (delivery) is 1-2 business days, but we do everything possible to send your order ASAP. Production and shipping are two different processes. So 1-2 business days to prepare PLUS the shipping times below. 

Box of soviet high quality bakelit 8-pin octal sockets with spring mount, for popular tubes 6L6, 6V6, 6SN7 etc.  Price for 80 sockets.

This is a pattern for crochet amigurumi tasty broccoli. Yum! Crochet amigurumi fruit and vegetables can be played in a various ways - teething, pretend food, grocery shopping or a perfect gift.. It is sure to be a great addition! *This listing is a PDF DIGITAL CROCHET PATTERN that you can download once payment has cleared and not an actual finished item* This easy-to-follow pattern with detailed instructions includes 26 step by step pictures on 10 pages. Skill level: Medium Feel free to message me if you are having any trouble understanding pattern, I will be happy to help! :) Finished broccoli measures about: Hight - 4,4" ( 11 cm ) Diameter - 5,2" (13 cm) Hope you will enjoy crocheting this broccoli as much as i did! :) Oh yeah! Also small gift is waiting for you inside :) You can see it in the last photo! Thank you for your visit P.S. Favorite this item to be sure you will not lose it ;) Please visit also my other food crochet pattern: https://lavky.com/mommys-bunny-crafts/

Romantic painting / Painting for home / Contemporary painting / Relax The graphic work is done in mixed media, ink and scraping, on special art paper. This is contemporary art for contemporary interiors for those who love minimalism. A laconic, romantic image promotes relaxation and fantasies, cannot get bored or ruin the style of a home or office. Works from this series look good as a diptych and more. The size of the work is 15 x 22 in (37 x 57 cm). The work is not framed. For an exhibition in the interior, it must be issued in a passport made of art cardboard, frame and glass. You just need to use the services of a framing workshop in your city. I recommend choosing a design in black and white or grayscale. It will be perfect! DELIVERY: Your work will be professionally packed in a cardboard tube for shipment. Shipping cost does not include taxes or customs related charges. DATE OF SENDING: Please note, I will send the parcel within 5-10 days, because my need to obtain permission from the Ministry of Culture for international shipment. In order for you to receive your parcel as quickly as possible, I will use the best postal services. Thank you for your love of art! I will be happy to answer any of your questions.

Romantic painting / Painting for home / Contemporary painting / Relax The graphic work was done using ink technique on special art paper. This is contemporary art for contemporary interiors for those who love minimalism. A laconic, romantic image promotes relaxation and fantasies, cannot get bored or ruin the style of a home or office. Works from this series look good as a diptych and more. The size of the work is 17 x 18 in (42 x 46 cm). The work is not framed. For an exhibition in the interior, it must be issued in a passport made of art cardboard, frame and glass. You just need to use the services of a framing workshop in your city. I recommend choosing a design in black and white or in shades of beige. It will be perfect! DELIVERY: Your work will be professionally packed in a cardboard tube for shipment. Shipping cost does not include taxes or customs related charges. DATE OF SENDING: Please note, I will send the parcel within 5-10 days, because my need to obtain permission from the Ministry of Culture for international shipment. In order for you to receive your parcel as quickly as possible, I will use the best postal services. Thank you for your love of art! I will be happy to answer any of your questions.

Romantic painting / Painting for home / Contemporary painting / Relax The graphic work is done in mixed media, ink and scraping, on special art paper. This is contemporary art for contemporary interiors for those who love minimalism. A laconic, romantic image promotes relaxation and fantasies, cannot get bored or ruin the style of a home or office. Works from this series look good as a diptych and more. The size of the work is 15 x 22 in (37 x 57 cm). The work is not framed. For an exhibition in the interior, it must be issued in a passport made of art cardboard, frame and glass. You just need to use the services of a framing workshop in your city. I recommend choosing a design in black and white or grayscale. It will be perfect! DELIVERY: Your work will be professionally packed in a cardboard tube for shipment. Shipping cost does not include taxes or customs related charges. DATE OF SENDING: Please note, I will send the parcel within 5-10 days, because my need to obtain permission from the Ministry of Culture for international shipment. In order for you to receive your parcel as quickly as possible, I will use the best postal services. Thank you for your love of art! I will be happy to answer any of your questions.

Romantic painting / Painting for home / Contemporary painting / Relax landscape / Seascape The graphic work was done using ink technique on special art paper. This is contemporary art for contemporary interiors for those who love minimalism. A laconic, romantic image promotes relaxation and fantasies, cannot get bored or ruin the style of a home or office. Works from this series look good as a diptych and more. The size of the work is 15 x 22 in (38 x 57 cm). The work is not framed. For an exhibition in the interior, it must be issued in a passport made of art cardboard, frame and glass. You just need to use the services of a framing workshop in your city. I recommend choosing a design in black and white or grayscale. It will be perfect! DELIVERY: Your work will be professionally packed in a cardboard tube for shipment. Shipping cost does not include taxes or customs related charges. DATE OF SENDING: Please note, I will send the parcel within 5-10 days, because my need to obtain permission from the Ministry of Culture for international shipment. In order for you to receive your parcel as quickly as possible, I will use the best postal services. Thank you for your love of art! I will be happy to answer any of your questions.

Romantic painting / Painting for home / Contemporary painting / Relax landscape / Seascape The graphic work was done using ink technique on special art paper. This is contemporary art for contemporary interiors for those who love minimalism. A laconic, romantic image promotes relaxation and fantasies, cannot get bored or ruin the style of a home or office. Works from this series look good as a diptych and more. The size of the work is 15 x 18 in (39 x 46 cm). The work is not framed. For an exhibition in the interior, it must be issued in a passport made of art cardboard, frame and glass. You just need to use the services of a framing workshop in your city. I recommend choosing a design in black and white or grayscale. It will be perfect! DELIVERY: Your work will be professionally packed in a cardboard tube for shipment. Shipping cost does not include taxes or customs related charges. DATE OF SENDING: Please note, I will send the parcel within 5-10 days, because my need to obtain permission from the Ministry of Culture for international shipment. In order for you to receive your parcel as quickly as possible, I will use the best postal services. Thank you for your love of art! I will be happy to answer any of your questions.

Romantic painting / Painting for home / Contemporary painting / Relax landscape / Seascape The graphic work was done using ink technique on special art paper. This is contemporary art for contemporary interiors for those who love minimalism. A laconic, romantic image promotes relaxation and fantasies, cannot get bored or ruin the style of a home or office. Works from this series look good as a diptych and more. The size of the work is 14 x 19 in (36 x 48 cm). The work is not framed. For an exhibition in the interior, it must be issued in a passport made of art cardboard, frame and glass. You just need to use the services of a framing workshop in your city. I recommend choosing a design in black and white or grayscale. It will be perfect! DELIVERY: Your work will be professionally packed in a cardboard tube for shipment. Shipping cost does not include taxes or customs related charges. DATE OF SENDING: Please note, I will send the package within 5-10 days, because I need to get permission from the Ministry of Culture to ship internationally. To ensure that you receive your package as quickly as possible, I will use the best postal services. Thank you for your love of art! I will be happy to answer any of your questions.

Romantic painting / Painting for home / Contemporary painting / Relax landscape The graphic work is done in mixed media, ink and watercolor, on special art paper. This is contemporary art for contemporary interiors for those who love minimalism. A laconic, romantic image promotes relaxation and fantasies, cannot get bored or ruin the style of a home or office. Works from this series look good as a diptych and more. The size of the work is 16.54 x 23.23 in (42 x 59 cm). The work is not framed. For an exhibition in the interior, it must be issued in a passport made of art cardboard, frame and glass. You just need to use the services of a framing workshop in your city. I recommend choosing a design in black and white or grayscale. It will be perfect! DELIVERY: Your work will be professionally packed in a cardboard tube for shipment. Shipping cost does not include taxes or customs related charges. DATE OF SENDING: Please note, I will send the package within 5-10 days, because I need to get permission from the Ministry of Culture to ship internationally. To ensure that you receive your package as quickly as possible, I will use the best postal services. Thank you for your love of art! I will be happy to answer any of your questions.

Romantic painting / Painting for home / Contemporary painting / Relax landscape   The graphic work is done in mixed media, ink and watercolor, on special art paper. This is contemporary art for contemporary interiors for those who love minimalism. A laconic, romantic image promotes relaxation and fantasies, cannot get bored or ruin the style of a home or office. Works from this series look good as a diptych and more. The size of the work is 16.54 x 23.23 in (42 x 59 cm). The work is not framed. For an exhibition in the interior, it must be issued in a passport made of art cardboard, frame and glass. You just need to use the services of a framing workshop in your city. I recommend choosing a design in black and white or grayscale. It will be perfect! DELIVERY: Your work will be professionally packed in a cardboard tube for shipment. Shipping cost does not include taxes or customs related charges. DATE OF SENDING: Please note, I will send the package within 5-10 days, because I need to get permission from the Ministry of Culture to ship internationally. To ensure that you receive your package as quickly as possible, I will use the best postal services. Thank you for your love of art! I will be happy to answer any of your questions.

Romantic painting / Painting for home / Contemporary painting / Relax landscape The graphic work is done in mixed media, ink and watercolor, on special art paper. This is contemporary art for contemporary interiors for those who love minimalism. A laconic, romantic image promotes relaxation and fantasies, cannot get bored or ruin the style of a home or office. Works from this series look good as a diptych and more. The size of the work is 16.54 x 23.23 in (42 x 59 cm). The work is not framed. For an exhibition in the interior, it must be issued in a passport made of art cardboard, frame and glass. You just need to use the services of a framing workshop in your city. I recommend choosing a design in black and white or grayscale. It will be perfect! DELIVERY: Your work will be professionally packed in a cardboard tube for shipment. Shipping cost does not include taxes or customs related charges. DATE OF SENDING: Please note, I will send the package within 5-10 days, because I need to get permission from the Ministry of Culture to ship internationally. To ensure that you receive your package as quickly as possible, I will use the best postal services. Thank you for your love of art! I will be happy to answer any of your questions.