Home & Hobby

patriotic dolls

patriotic dolls

ClonePI-W is a modern microprocessor-based universal pulse metal detector. The device is designed to search for metal objects in the ground, sand, walls, dense grass, etc. Using the device in a set with interchangeable sensors of different sizes allows you to solve a wide range of search tasks in treasure hunting, construction, when searching for lost things and in other specific areas of human activity. Main technical characteristics The maximum depth of detection of objects (in the air): With a ring sensor (diameter 19cm) Coin with a diameter of 25mm - up to 30cm; Helmet - up to 60cm; The maximum depth of up to 150cm; With depth loop probe (1,2х1,2m)  Helmet - up to 140cm; Steel barrel 200l - up to 200cm; Maximum depth - up to 300cm. Indication: Visual LED; Audio multitonal; Search mode static; Continuous operation time with a fully charged battery up to 15 hours. Operating conditions Air temperature -10...+50ºС. Atmospheric pressure 710...800 mm Hg. Relative humidity up to 95% at temperature +25ºС. It is strictly prohibited to operate the unit with the cover removed or with damaged insulation of the sensor cable because of the risk of electric shock. The principle of operation of the ClonePI-W pulse metal detector is based on excitation of pulse eddy currents in the metal object and measurement of the secondary electromagnetic field which induces these currents. Using the built-in microprocessor, the device analyzes this over-radiated signal and produces the corresponding indication of the detected object.

ClonePI-W is a modern microprocessor-based universal pulse metal detector. The device is designed to search for metal objects in the ground, sand, walls, dense grass, etc. Using the device in a set with interchangeable sensors of different sizes allows you to solve a wide range of search tasks in treasure hunting, construction, when searching for lost things and in other specific areas of human activity. Main technical characteristics The maximum depth of detection of objects (in the air): With a ring sensor (diameter 19cm) Coin with a diameter of 25mm - up to 30cm; Helmet - up to 60cm; The maximum depth of up to 150cm; With depth loop probe (1,2х1,2m)  Helmet - up to 140cm; Steel barrel 200l - up to 200cm; Maximum depth - up to 300cm. Indication: Visual LED; Audio multitonal; Search mode static; Continuous operation time with a fully charged battery up to 15 hours. Operating conditions Air temperature -10...+50ºС. Atmospheric pressure 710...800 mm Hg. Relative humidity up to 95% at temperature +25ºС. It is strictly prohibited to operate the unit with the cover removed or with damaged insulation of the sensor cable because of the risk of electric shock. The principle of operation of the ClonePI-W pulse metal detector is based on excitation of pulse eddy currents in the metal object and measurement of the secondary electromagnetic field which induces these currents. Using the built-in microprocessor, the device analyzes this over-radiated signal and produces the corresponding indication of the detected object.

Ready-made board of the metal detector Pirate. The size of the board 3/7cm. Speaker included. Working, tested boards. The Pirat metal detector is one of the most famous because of its simplicity and quite good characteristics.  This device is able to pick up coins under the ground at a distance of 15-20 cm, large metal objects - up to 120 cm. Tuning of the Pirate metal detector A properly assembled metal detector does not need fine tuning, but for fine tuning there are two variable resistors R12 and R13 in the circuit. To tune it, turn R12 and R13 until you get rare clicks in the speaker. Before tuning, turn on the metal detector and wait 10-20 seconds. Move all metal objects away from the search coil. Specifications Coin detection depth, to 20 - 22 cm Depth of detection of large objects, 100 - 120 cm Supply voltage, 9 - 14 V Current consumption, 60 - 70 mA Impulse current consumption, 1 - 2 A Board dimensions, 45 X 52 mm

Ready-made board of the metal detector Pirate. The size of the board 3/7cm. Speaker included. Working, tested boards. The Pirat metal detector is one of the most famous because of its simplicity and quite good characteristics.  This device is able to pick up coins under the ground at a distance of 15-20 cm, large metal objects - up to 120 cm. Tuning of the Pirate metal detector A properly assembled metal detector does not need fine tuning, but for fine tuning there are two variable resistors R12 and R13 in the circuit. To tune it, turn R12 and R13 until you get rare clicks in the speaker. Before tuning, turn on the metal detector and wait 10-20 seconds. Move all metal objects away from the search coil. Specifications Coin detection depth, to 20 - 22 cm Depth of detection of large objects, 100 - 120 cm Supply voltage, 9 - 14 V Current consumption, 60 - 70 mA Impulse current consumption, 1 - 2 A Board dimensions, 45 X 52 mm

Sampler cross stitch pattern - a bookmark with a fairytale house under a large tree, a round green door is the entrance to the halfling's house from the movie. The pattern is simple and modern, easy and fast to embroider. Great handmade holiday gift. Every book lover will appreciate this bookmark. The diagrams are prepared for instant download in PDF format. Fabric: 16 count  White Aida Stitches: 27 x 112 Size: 1.69 x 7.00 inches or 4.29 x 17.78 cm Colours: 21 (DMC) This PDF pattern Includes: - Pattern in black and white symbol on 1 and 2 pages, - Pattern in color blocks and symbols on 1 and 2 pages, - Pattern in color blocks and symbols without backstitch on 2 pages, - List of DMC colors you will need. ATTENTION! For personal use only! All my patterns are not for commercial using. You may not resold files as is, or with minor changes. The product may not be used in any way whatsoever in which you charge money, collect fees, or receive any form of remuneration. Also the representation on any free web resource is prohibited. Please understand me as the owner. Please note this is a PDF PATTERN ONLY! No fabric, floss, or other materials are included in the listing. If you have any questions about the purchased product, individual order of cross-stitch patterns, downloading files in PDF format - write to me in a private message  If you need to know the size of the fabric when using: Aida 6, Aida 11, Aida 14, Aida 16, Aida 18, Aida 22, Aida 25, Aida 28, Aida 32 - try visiting the special "Fabric Size Calculator" at: https://www.cyberstitchers.com... ♥ LINK TO SIMILAR DISCOUNTED PRODUCTS ♥ https://www.etsy.com/shop/Auth... To open this files you will need Adobe Reader, which can be downloaded here for free: https://acrobat.adobe.com/us/e... I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order.

Cross stitch pattern -  bookmark with movie cross stitch. The bookmark pattern on the topic fairy ring as a small cross stitch is very easy, even a novice embroiderer can handle it. Handmade bookmark with dragon cross stitch - a great book lover gift, as well as fantasy movie lovers. The diagrams embroidery bookmark are prepared for instant download PDF. Fabric: 16 count  White Aida Stitches: 27 x 112 Size: 1.69 x 7.00 inches or 4.29 x 17.78 cm Colours: 17 (DMC) This PDF pattern Includes: - Pattern in black and white symbol on 1 and 2 pages, - Pattern in color blocks and symbols on 1, 2 and 3 pages, - List of DMC colors you will need and thread length. ATTENTION! For personal use only! All my patterns are not for commercial using. You may not resold files as is, or with minor changes. The product may not be used in any way whatsoever in which you charge money, collect fees, or receive any form of remuneration. Also the representation on any free web resource is prohibited. Please understand me as the owner. Please note this is a PDF PATTERN ONLY! No fabric, floss, or other materials are included in the listing. If you have any questions about the purchased product, individual order of cross-stitch patterns, downloading files in PDF format - write to me in a private message.  If you need to know the size of the fabric when using: Aida 6, Aida 11, Aida 14, Aida 16, Aida 18, Aida 22, Aida 25, Aida 28, Aida 32 - try visiting the special "Fabric Size Calculator" at: https://www.cyberstitchers.com... ♥ LINK TO SIMILAR DISCOUNTED PRODUCTS ♥ https://www.etsy.com/shop/Auth... To open this files you will need Adobe Reader, which can be downloaded here for free: https://acrobat.adobe.com/us/e... I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order. Thank you for visiting my store. I hope you enjoyed it here :) I wish you easy embroidery!

Monitor after service

The original case made of polywood and venner. 

Handmade crochet daisy flower and sunflower charm. Rear view mirror car charm, Amigurumi flowers car accessories. Use as car mirror hanging, bag charm, backpack charm. Cute gift box available. Flower size approx. 2 1/3" (6 cm.) in diametr. Flowers is made with cotton yarn and stuffed with hypoallergenic fiberfill. When folded, the length of the loop is about 6 1/2" (17 cm.) Hand made with love.

Handmade Tesla Music Coil. The body is made of wood and plastic and covered with several layers of varnish to prevent damage to the wood and give a more beautiful appearance. All plastic parts were modeled and printed on a 3D printer. The Tesla coil control unit is equipped with: an MP3 player, Bluetooth and tone block that allows you to listen to music from a regular USB flash card and microSD card, as well as via Bluetooth from a smartphone or computer. Modes: MP3 player and Bluetooth are switched by a switch on the back panel of the control unit. This Tesla music coil works only on 220 volts and consumes 250 watts. For the correct operation of this Tesla coil, grounding is required, if there is a connected grounding in the sockets in the house, then additional grounding no need to connect. If there is no grounding in the house, it must be connected through the cable included in the kit.

New tested photoelectric sensor E51.

Crochet 3 sizes pumpkin pattern PDF. Amigurumi pumpkin Halloween pattern, Thanksgiving home decor, Vintage halloween decoration. !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! A very quick and easy Halloween Project! These lovely mini pumpkin will be a cute Halloween decor for your home or office, a great small gift for kids. It can be used in a baby room, living room, or fireplace, as a garland on the wall, as outside decoration in the garden. Size – Approximately 2 ¾” (7 cm.), 2” (5cm.), 1 ½” (4cm.) in diameter. This pattern is suitable for those who have crochet skills for beginners and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description. You will need: - cotton or cotton blend yarn ( YarnArt Jeans) or any yarn 4 ply. - hook B (2 mm.) - polyester fiberfill - needle, scissors You are free to sell the finished item made from this pattern. PATTERN CAN"T BE SOLD!!! Happy crocheting!!! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Box of soviet high quality bakelit 8-pin octal sockets with spring mount, for popular tubes 6L6, 6V6, 6SN7 etc.  Price for 80 sockets.

Box of 50 pcs. power pentodes 6P1P-EV with Noval socket (9-pin). With a red dot, and "OTK" (best military quality). As you can see from the photo, not all tubes are marked with the Svetlana logo, but it is absolutely brand new opened box. 6P1P-EV is similar to 6AQ5, EL90 and 6V6 tubes but with different pinout. Direct replacement 6P1 in Chinese tube amps. Content of precious metals (in one tube): gold - 0.007036 grams platinum - 0.000162 grams Tube factory "Svetlana" (St Petersburg)=C=

I would like to propose pieces (non-treated) of single crystal magnesium fluoride (MgF2). The material was produced in Ukraine, by the Institute for single crystals (Kharkiv), in October 1983. It was planned to use it during his scientfic-research work, but priorities changed and the materials was lying in the box about next 38 years. There are 11 pieces available with total mas 4,830 kg, their parameters are shown in the table below. Crystallographic  orientation (if marked) Position No. Form/Dimensions, mm Mass, kg F 1 Irregularly-shaped/ 150*77 1,800 F 2 Cylindrical shape/ 36*90 0,275 - F 3 Cylindrical shape/ 93*39 0,300 - F 4 Cylindrical shape/ 85*25 0,258 - F 5 Cylindrical shape/ 81*36 0,234 - F 6 Prism/39*35 0,087 - F 7 Prism/ 69*24 0,182 F 8 Irregularly-shaped/ 57*39 0,245 - F 9 Prism/ 73*22 0,220 - F 10 Prism with cleavage/ 80*42 0,535 F 11 Prism with cleavage/ 80*60 0,700 MgF2 is rare material, which is usually being used for presicion optical components production. These components include  lenses, prisms and  windows with simple or complicated geometry. This material is trasnsparent (transmissivity over 0,9) in spectral range 120-8000 nm.  It should be outlined, that there are only non-treated pieces (see the Photos) available!   Photos have been obtained at day light for the most true color demonstration. The price is noticed per 1 kg.

Amplifier repair service

Compro Technology 1MP03PV6KE1 Video Mate TV PVR / FM PAl BG + DK adapter.  Was in operation, fully working, tested.

Aluminum remote controller for the Flux amp

Cute Ghost with Candy corn crochet car charm pattern. Amigurumi Ghost witn mini Candy corn hat. Halloween crochet car charm pattern. Car rearview mirror hanging accessories. No sew. Amazing project for Halloween and Fall season lovers! These cute ghost charm will be a cute Halloween small gift for kids, adults. It can be used as car hanging, as a garland on the wall, as home or outside decoration in the garden for Halloween party. This cute Ghost will bring a lot of positive energy every time you look at it. Size – Approximately Ghost - 2 1/3” (6 cm.), Hat - 2 1/3” (6 cm.) in diameter, Candy corn - 2” (5 cm.). !!!This listing is for a digital download crochet pattern - NOT a FINISHED ITEM!!! This pattern is suitable for those who have crochet skills for intermediate and know the magic ring, single crochet, increase, decrease. Pattern is in standard American terms. The pdf file contains a step-by-step description and pictures on 4 pages. Also description of techniques Invisible decrease, Invisible join, Invisible color change and Bobble stitch. You will need: - cotton or cotton blend yarn ( YarnArt Jeans) or any yarn 4 ply. - hook B (2 mm.) - safety eyes 8 mm. - polyester fiberfill - needle, scissors You are free to sell the finished item made from this pattern. PATTERN CAN"T BE SOLD!!! Happy crocheting!!! @tanya_tappleta Lavky shop Etsy Ravelry InspireUplift Lovecrafts

Aluminum remote controller for the Flux amp

Power supply for signage repair. The customer's power supply unit has failed, this is the repair parts for the repair period guaranteed

A set of interesting things for life. In the box you will find: a men's suit with a belt, shoes, sweatpants, various souvenirs, photographs, photo frames, etc.