SUPPORT UKRAINIAN SELLERS BY SHOPPING HERE!

Electronics & Circuitry

An electronic circuit is composed of individual electronic components, such as resistors, transistors, capacitors, inductors and diodes, connected by conductive wires or traces through which electric current can flow. Enjoy the flow of creativity!

Voltmeter in bakelite housing M 45 M . Measuring range from 0 to 300 V. In good condition. Made by the Krasnodar plant of measuring instruments, USSR, 1985.         New. No chips or cracks. With documents. In stock.
Vendor: Liberta
$22.00
The original case made of polywood and venner. 
Vendor: Kupa Dobra
$220.00
Since 1990, the NUMAN black-and-white TV receiver has been produced by the Television Plant named after the 50th anniversary of the USSR. Soviet USSR Vintage Small TV NUMAN 31TB TV - Made in USSR Working Vintage TV The TV has a number of automatic adjustments to ensure high picture quality. The TV has a built-in telescopic antenna. Power supply from the expected or expected current network. The TV body is made of impact-resistant polystyrene in various colors. See photos and condition description. Great vintage item for collection or decoration.
Vendor: Liberta
$66.00
Accessories for light-up numbers - dimmers and adapters
Vendor: Magazey
$6.00
The manual dough sheeter is designed for rolling any dough (prosphora, pasties, dumplings, khinkali, pizza, as well as the further production of lasagna and Italian pasta) with a thickness of 0-30 mm by mechanically rolling it between rolls. Two handles: on the left - rotation of the shafts (both shafts rotate simultaneously), on the right - stepped adjustment of the shafts spread (fixing the gap provides quick and accurate adjustment of the dough rolls). Made entirely of stainless steel. The set includes 2 clamps for secure fixation of the dough roller to the table. Roll length - 50cm Number of rolls - 1 pair Table tilt angle - 27 ° Designed for cafes and industries, as well as home use Roll spread - from 0.7mm to 30mm Connection type - manual Dimensions - 570x300x200mm (22.5 x 12 x 8 inches) Weight - 10kg (4.5 - 5lbs) Roll diameter - 60mm (2.35 inches) WE DO NO ASSUME COSTS OF TAXES ADDITIONAL IMPOSED BY THE CUSTOMS OF EACH COUNTRY. WE DO NOT ACCEPT RETURNS. Thank you!
Vendor: Sukhanov
$150.00
Save 4%
NEW Home-made. Dual Band 2m 70cm Antenna jpole VHF/UHF roll Slim Jim J-Pole, connector SMA FEMALE Made from Twin-lead cable 300 ohm Ferrite choke installed on coaxial cable RG-174 (50 ohm)   Dual Band 2m/70cm 140mhz-149mhz has SWR not more than 2.0; 145,500 - SWR 1.1-1.3  works well on the 70cm band via 3rd harmonics also (SWR 1.47 - 2.0) Antenna length approx 1.5m Feedline length 4m. Will handle 60 watts. 6db of gain. total weight 150g. Items is new in good Working Condition! SHIPPING: I ship Worldwide from the East Europe (Ukraine) by registered Airmail. Items will be shipped from Ukraine every day after payment is received and verified. GUARANTEE. Returns Accepted, Buyer, 14 Days, Money Back. I hope to hear from you positive feedback.
Vendor: radioamateur
$25.00 $24.00
ClonePI-W is a modern microprocessor-based universal pulse metal detector. The device is designed to search for metal objects in the ground, sand, walls, dense grass, etc. Using the device in a set with interchangeable sensors of different sizes allows you to solve a wide range of search tasks in treasure hunting, construction, when searching for lost things and in other specific areas of human activity. Main technical characteristics The maximum depth of detection of objects (in the air): With a ring sensor (diameter 19cm) Coin with a diameter of 25mm - up to 30cm; Helmet - up to 60cm; The maximum depth of up to 150cm; With depth loop probe (1,2х1,2m)  Helmet - up to 140cm; Steel barrel 200l - up to 200cm; Maximum depth - up to 300cm. Indication: Visual LED; Audio multitonal; Search mode static; Continuous operation time with a fully charged battery up to 15 hours. Operating conditions Air temperature -10...+50ºС. Atmospheric pressure 710...800 mm Hg. Relative humidity up to 95% at temperature +25ºС. It is strictly prohibited to operate the unit with the cover removed or with damaged insulation of the sensor cable because of the risk of electric shock. The principle of operation of the ClonePI-W pulse metal detector is based on excitation of pulse eddy currents in the metal object and measurement of the secondary electromagnetic field which induces these currents. Using the built-in microprocessor, the device analyzes this over-radiated signal and produces the corresponding indication of the detected object.
Vendor: Old things
$39.00
Looking for a high-quality  pulse metal detector  that can handle any task? Look no further than the  Clone PI W  with High-Quality Assembly - Brand New! This modern, microprocessor-based device is designed to search for metal objects in a wide variety of environments, including the ground, sand, walls, dense grass, and more. With interchangeable sensors of different sizes, you can easily customize your search to meet your specific needs. ( Replacement sensors are not included! ) This unit features a sleek black panel color , firmware 1.2.2m, and includes mating connectors to the sensor. The cases are  D110A , and the  battery 18650 is not included . The  maximum depth  of detection of objects is impressive, with a ring sensor (diameter 19cm) able to detect a coin with a  diameter of 25mm   up to 30cm  away, and a helmet  up to 60cm  away. The maximum depth of  up to 150cm .  With a depth loop probe (1,2х1,2m),  Helmet - up to 140cm ,  steel barrel 200l  -  up to 200cm,   the maximum depth is  up to 300cm ! Indications are provided through  visual LED  and  audio multitonal alerts , while the device operates in  static search  mode. With a fully charged battery, continuous operation time can last  up to 15 hours . Please note that the operating conditions include an air temperature range of -10...+50ºС, atmospheric pressure of 710...800 mm Hg, and relative humidity up to 95% at temperature +25ºС. It is crucial to avoid operating the unit with the cover removed or with damaged insulation of the sensor cable. This pulse metal detector is based on the principle of excitation of pulse eddy currents in the metal object and measurement of the secondary electromagnetic field which induces these currents. With the built-in microprocessor, the device analyzes this over-radiated signal and produces the corresponding indication of the detected object. Shipping times  can range from 2 weeks to 45 days depending on logistics. Please note that the current situation may cause difficulties, but parcels are still being delivered. Get your hands on the Clone PI W with High-Quality Assembly - Brand New today!
Vendor: Old things
$300.00
ClonePI-W is a modern microprocessor-based universal pulse metal detector. The device is designed to search for metal objects in the ground, sand, walls, dense grass, etc. Using the device in a set with interchangeable sensors of different sizes allows you to solve a wide range of search tasks in treasure hunting, construction, when searching for lost things and in other specific areas of human activity. Main technical characteristics The maximum depth of detection of objects (in the air): With a ring sensor (diameter 19cm) Coin with a diameter of 25mm - up to 30cm; Helmet - up to 60cm; The maximum depth of up to 150cm; With depth loop probe (1,2х1,2m)  Helmet - up to 140cm; Steel barrel 200l - up to 200cm; Maximum depth - up to 300cm. Indication: Visual LED; Audio multitonal; Search mode static; Continuous operation time with a fully charged battery up to 15 hours. Operating conditions Air temperature -10...+50ºС. Atmospheric pressure 710...800 mm Hg. Relative humidity up to 95% at temperature +25ºС. It is strictly prohibited to operate the unit with the cover removed or with damaged insulation of the sensor cable because of the risk of electric shock. The principle of operation of the ClonePI-W pulse metal detector is based on excitation of pulse eddy currents in the metal object and measurement of the secondary electromagnetic field which induces these currents. Using the built-in microprocessor, the device analyzes this over-radiated signal and produces the corresponding indication of the detected object.
Vendor: Old things
$39.00
Ready-made board of the metal detector Pirate. The size of the board 3/7cm. Speaker included. Working, tested boards. The Pirat metal detector is one of the most famous because of its simplicity and quite good characteristics.  This device is able to pick up coins under the ground at a distance of 15-20 cm, large metal objects - up to 120 cm. Tuning of the Pirate metal detector A properly assembled metal detector does not need fine tuning, but for fine tuning there are two variable resistors R12 and R13 in the circuit. To tune it, turn R12 and R13 until you get rare clicks in the speaker. Before tuning, turn on the metal detector and wait 10-20 seconds. Move all metal objects away from the search coil. Specifications Coin detection depth, to 20 - 22 cm Depth of detection of large objects, 100 - 120 cm Supply voltage, 9 - 14 V Current consumption, 60 - 70 mA Impulse current consumption, 1 - 2 A Board dimensions, 45 X 52 mm
Vendor: Old things
$35.00
Оригінальний жорсткий диск у відмінному стані. Дивіться фото.
Vendor: Liberta
$24.00
Оригінальний жорсткий диск у відмінному стані. Дивіться фото.
Vendor: Liberta
$24.00