Electronics & Circuitry

Nixie tube clock in mid century style assembled using vintage tubes IN-14. The clock case is made out of eco friendly natural solid ash. The case is polished and smoothed by hands, coated wood stain. Full color backlight with wireless radio remote control. You can order personalization for a wonderful gift for a birthday, wedding, anniversary or other event. Options for inscriptions can be seen in the last photo. Features: - Time format: 12/24 time display - Indication: Hours, Minutes, Day, Month (2 modes) - Show date switched ON/OFF - Effects preset Slot Machine every 10 minutes (preventing cathode poisoning) - Adjustable full color backlight - Lithium battery backup - Simple time setting using three buttons - Power adapter: input AC 100..240V, output DC 9..12V (US, EU or UK socket). All the lamps are in sockets. It simplify the repair in case any of the lamps burns out. Warning! Please after delivering keep devices in a room at least for 2 hours before turn it on. ITEM DETAILS: Weight: 1 lb (0.4 kg) Width: 3.1" (8 cm) Length: 7.1" (18 cm) Height: 3.5" (9 cm) BOX CONTAINS: 1 x Nixie tube clock 1 x Power adapter

Handmade Tesla Music Coil. The body is made of wood and plastic and covered with several layers of varnish to prevent damage to the wood and give a more beautiful appearance. All plastic parts were modeled and printed on a 3D printer. The Tesla coil control unit is equipped with: an MP3 player, Bluetooth and tone block that allows you to listen to music from a regular USB flash card and microSD card, as well as via Bluetooth from a smartphone or computer. Modes: MP3 player and Bluetooth are switched by a switch on the back panel of the control unit. This Tesla music coil works only on 220 volts and consumes 250 watts. For the correct operation of this Tesla coil, grounding is required, if there is a connected grounding in the sockets in the house, then additional grounding no need to connect. If there is no grounding in the house, it must be connected through the cable included in the kit.

This item can be sold elsewhere, so please contact me first before you buy! FREE SHIPPING  WORLDWIDE Fully assembled Watch With Nixie Tubes  ITT5853 / NL-5870ST made in England. Iit's only completely new electronic components with highest quality soldering. Dimensions of the case from the outside - h 20 mm, d 50 mm. Charging voltage 5V 1A from standard USB power adapter. Time indication and setting mode is done by one button. Watch was tested and showed time more than 500 indications per one charge, or one month standby time. Display mode - 24 hours with the effect of busting the cathode. Battery charge has two modes: - light from red LEDs - charging process; - light from blue LEDs - end of charge. if the tubes light is out - the battery is completely discharged, charge the battery. Case for this watch was printed at LCD 3D printer, material - resin tm. Resione K+ Black like ABS - improved formula, no fluorescent effect in sunlight. This lot includes: 1pc fully assembled watch with USB cabel. This watch is almost entirely handmade. By making a purchase you will support the further development of this project. Thank you very much in advance for the deal! You  can  take a look  video, how this watch look like  here: youtu.be/xgnIMUfK3g8 Watch other videos on my channel. Attention: risk of high voltage shock - be extremely careful, because the operating voltage of the nixie tubes is 160...180 volts.  Even when they are not working, high-voltage circuits can store a fairly accumulate high voltage .  Protect from dust and water ingress.   Attention - depending on the taxation on state of USA or the regions of Europe,  can be additional tax charged when you pay,  if you see an additional tax - I cannot influence this due to your local laws.

2 SET Guitar pickups  (Total 5 pcs)  1. SET TELECASTER GUITAR PICKUPS (2pcs) 2. SET STRATOCASTER GUITAR PICKUPS (3pcs)

SET TELE GUITAR PICKUPS   NASHVILLE BEST VINTAGE TONE SOUND 3pcs pickups

The original case made of polywood and venner. 

This Nixie clock was assembled using Soviet IN-12 tubes. These tubes are vintage, they were made in the 1970-1980ss, but were not used. Their factory warranty is 5000 hours of operation, but thanks to the protection of the Cathode from poisoning, realized in our clock, the tubes can work for several decades. The original case was made of cedar and covered with wood stain, patina and high-quality polyurethane varnish. Features: - Time format: 12/24 time display - Indication: hours, minutes, seconds - Blinking bulbs with adjustable duration - Selectable date display (from second n...to second m of every minute) - Adjustable date format (DDMMYY, MMDDYY, YYMMDD) - Turn off the blue backlight tubes with a separate button - Selectable blanking of leading zeros - Automatic daylight saving time correction (configurable) - Selectable digit cross fading for the nixies - Selectable „Slot machine“ every n minutes to prevent cathode-poisoning - “Night mode“ – nixies can be switched off for a selectable time - Alarm clock - Nixies can be dimmed by key-press: full+fading, full, half, off) - Nixies can be switched on by key-press during „Night mode“ (slot machine and date display are suppressed) - Nixies are switched on during alarm in „Night mode“ (for a selectable time) - All settings are saved in the EEPROM and will be kept in case of disconnection to mains - Power adapter with EU, UK or US plug is included - The clock accepts 110V and 220V in both frequencies, 50Hz and 60Hz - All options (start/end times, intervals etc.) can be configured with 2 switches (the third is for the alarm handling) during operation. Clock Care: You can use a dry cloth to clean your clock. Product Dimensions: Length: 215 mm (8.3") Width: 70 mm (2.8") Height: 85 mm (3.3") Weight: 545 g (1.2 pound)

New tested photoelectric sensor E51.

This clock is assembled using vintage nixie tubes that were produced in the 1970s...1980s, and combines modern electronics with the warm glow of the past. The clock case is made out of natural solid oak, polished and smoothed by hands, coated linseed oil. Full color backlight with keys control. This piece will perfectly decorate any interior in the mid-century, loft, industrial or steampunk style. It would also make a great gift for dad and grandpa (especially for fans of electronics). Features: - Time format: 12/24 time display - Indication: Hours, Minutes, Day, Month (2 modes) - Show date switched ON/OFF - Effects preset Slot Machine every 10 minutes (preventing cathode poisoning) - Adjustable multicolor backlight - Lithium battery backup - Simple time setting using three buttons - Power adapter: input AC 100..240V, output DC 9..12V (US, EU or UK socket) All the lamps are in sockets. It simplify the repair in case any of the lamps fail. Warning! Please after delivering keep devices in a room at least for 2 hours before turn it on. ITEM DETAILS: Weight: 1 lb (0.4 kg) Width: 3.1" (8 cm) Length: 7.1" (18 cm) Height: 3.1" (8 cm) BOX CONTAINS: 1 x Nixie clock 1 x Power adapter

FM antenna for long range receiving online radio stations.

Feel the full-range dynamics and control. Specially engineered to deal with most hard to drive headphones on market. Just forget about the problem with difficult loads in terms of impedance or power consumption. A mode with a supply voltage of 80 volts of output stage all that features are providing clean transmission for signal up to 16 Watt on 32 Ohm load of output power.

Digitech GNX4 Guitar Multi Effects Pedal Board  with Pro Tracks Plus Software • Tested - Functional • Good Condition • Has normal wear • Includes manuals • See Specifications below • Please see images Comprehensive guitar amplifier and speaker modeling/effects processor USB port and included software allow the GNX4 to function as a 24-bit audio/MIDI interface for computer recording Three AudioDNA DSP engines for extensive programming Built-in 8-track recorder can record whole song arrangements, including vocals via an XLR input Microphone input supports condenser microphones via phantom power and includes a 20dB pad Built-in General MIDI drum machine Rugged steel, floor-form housing with included expression pedal and seven foot switches The foot switches are used to select presets, access the tuner, turn individual effects on and off, change amplifier channels, or bypass the GNX4 Compact Flash memory card interface Built-in tuner Form Floor processor Type Multi-effects Presets 80 User Memory 80 Controls and Indicators 7 x Foot Switches 1 x Expression Pedal 5 x Rotary Controls 20 x Effect Select/Status/Mode Buttons 1 x Data Wheel 13 x Matrix LEDs 10 Character Alpha/Numeric LED Display Inputs 1 x XLR Microphone 1 x 1/4" TS phone 2 x 1/4" TRS phone 1 x MIDI 1 x 1/4" TS Optional Footswitch 1 x USB (shared with output) Outputs 2 x XLR 2 x 1/4" TRS phone 1 x 1/4" TRS phone (Headphone) 1 x MIDI 1 x USB Digital Connectivity USB Dimensions 21 1/2" x 9" x 3 1/4"" Weight 10 lbs Specialties Compact Flash slot for optional Type I Compact Flash memory card to increase the available recording time and transfer files to and from a computer