Electronics & Circuitry

Ultra Short DC Cable with Angle Plug Barrel Connectors. Each cable is inspected and tested. Different cable length and plug size are available: 13cm DC power cable with 5.5x2.1mm angle plug connector 13cm DC power cable with 5.5x2.5mm angle plug connector (5.5x2.1mm compatible) 29cm DC power cable with 5.5x2.1mm angle plug connector 29cm DC power cable with 5.5x2.5mm angle plug connector (5.5x2.1mm compatible) Air Mail Worldwide shipping cost or UPS Express shipping cost should be added to cart separately. For any details contact me to radioproektor (@) gmail . com DC power connectors compatibility FAQ: There are two almost similar DC power connector standards walking between devices all around the world: 5.5mm (outer size) x 2.1mm (inner size) and 5.5mm (outer size) x 2.5mm (inner size). 5.5x2.5mm plug usually fits to 5.5x2.1mm socket but connection may be not too perfect if plug appears too old and outworn. 5.5x2.1mm plug do NOT fits to 5.5x2.5mm socket. It is better to use plug connectors with inner center spring contact. They better hold center pin mismatches. DC input power socket connectors compatibility list: BMMCC/BMMSC original expansion breakout cable - 5.5x2.5mm BMCC - 5.5x2.5mm BM Video Assist - 5.5x2.5mm BMPCC - 2.5(2.35)x0.7mm OLR Lite Breakout Box - 5.5x2.5mm CGPro BMMCC/BMMSC Breakout Box - 5.5x2.1mm SmallHD 500 series DC Faux LP-E6 Adapter - 5.5x2.1mm SmallHD DP series - 5.5x2.1mm All Atomos 7” recorders - 5.5x2.1mm Angle Breakout Expansion Box by RADIOPROEKTOR - 5.5x2.1mm Battery Enclosure Module by RADIOPROEKTOR - 5.5x2.1mm Juicebox Magic Power - 5.5x2.1mm ikan VL5, VL7, VH8, VK7(i), VX7(e,i), D5(w), D7(w), and VX9(e) monitors - 5.5x2.1mm ikan iLED144, iLED-ONE, iLED6, iLED312(-v2), ID(B)508 LED Light Units - 5.5x2.1mm

ARRI type Offset Rosette Mount Module for BMMCC/BMMSC developed by RADIOPROEKTOR. The main idea of this accessory is to allow easy access to camera buttons and same time keep rosette mounting point as close as possible to camera gravity center. This mount also can be used with many other rigs and cages with 9mm distance pitch between threaded holes. Symmetrical dual handle config possible as well. It is precisely CNC machined and uses quality stainless steel ARRI type rosettes. See development history of this product here http://www.bmcuser.com/showthread.php?20764 Air Mail Worldwide shipping cost or UPS Express shipping cost should be added to cart separately. For any details contact me directly to radioproektor (@) gmail . com Assembled kit includes: 1x Rosette Mount (CNC machined aluminum alloy, anodized in black color). 1x Stainless Steel ARRI type Rosette. 2x 1/4"-20 5/8" length Black Oxide button head screws. 4x M3 Stainless Steel screws. Tech Specs: ARRI Standard Rosette with M6 thread. Distance between mounting holes centers: 18mm. Weight: 47g.

Feel the full-range dynamics and control. Specially engineered to deal with most hard to drive headphones on market. Just forget about the problem with difficult loads in terms of impedance or power consumption. A mode with a supply voltage of 80 volts of output stage all that features are providing clean transmission for signal up to 16 Watt on 32 Ohm load of output power.

This Tutorial will show you step by step how to make my Dahlia Brooch! IMPORTANT: This Tutorial DO NOT includes instruction for how to do the Peyote stitch. This pattern is intended for users that have experience with the Peyote stitch technique. Skill Level: intermediate. Materials are NOT included!!! This is not a physical item, it is an DIGITAL file. The Tutorial includes 1 PDF file. The PDF file includes: - the list of the beads and materials you need; -  step by step schemes of flower Dahlia and leaves; - written instructions; - 25 pictures of the finished brooch and individual details (40 pages in total). My brooch Dahlia is made of Czech Presiosa beads. But you can replace it with Japanese Toho or Miyuki beads of the corresponding color.       You'll be able to download the file as soon as your payment has been confirmed. Please, just send me a message if you can't download your file. I will send you a the file by email. FOR PERSONAL USE ONLY. The goods are not subject to exchange and return. *Please, DO NOT sell, distribute, lend or copy my patterns!!! *You can sell your finished items made using my patterns *You can publish and share them on social networks, however include a link to this shop. *Please, credit my shop when using this pattern. Thank you! For any question, please feel free to contact me. Thank you for the attention!

This Nixie clock was assembled using Soviet IN-12 tubes. These tubes are vintage, they were made in the 1970-1980ss, but were not used. Their factory warranty is 5000 hours of operation, but thanks to the protection of the Cathode from poisoning, realized in our clock, the tubes can work for several decades. The original case was made of cedar and covered with wood stain, patina and high-quality polyurethane varnish. Features: - Time format: 12/24 time display - Indication: hours, minutes, seconds - Blinking bulbs with adjustable duration - Selectable date display (from second n...to second m of every minute) - Adjustable date format (DDMMYY, MMDDYY, YYMMDD) - Turn off the blue backlight tubes with a separate button - Selectable blanking of leading zeros - Automatic daylight saving time correction (configurable) - Selectable digit cross fading for the nixies - Selectable „Slot machine“ every n minutes to prevent cathode-poisoning - “Night mode“ – nixies can be switched off for a selectable time - Alarm clock - Nixies can be dimmed by key-press: full+fading, full, half, off) - Nixies can be switched on by key-press during „Night mode“ (slot machine and date display are suppressed) - Nixies are switched on during alarm in „Night mode“ (for a selectable time) - All settings are saved in the EEPROM and will be kept in case of disconnection to mains - Power adapter with EU, UK or US plug is included - The clock accepts 110V and 220V in both frequencies, 50Hz and 60Hz - All options (start/end times, intervals etc.) can be configured with 2 switches (the third is for the alarm handling) during operation. Clock Care: You can use a dry cloth to clean your clock. Product Dimensions: Length: 215 mm (8.3") Width: 70 mm (2.8") Height: 85 mm (3.3") Weight: 545 g (1.2 pound)

Nixie Tube Clock IN-14 and  ⠀ Size (LxWxH): (18.5cm) х (7cm) x 2.7”(7.5cm) All materials are environmentally friendly. ⠀ Manufacturer: Handmade in Ukraine. 5V DC, 1A 110-240V

1 LOT - 10pcs Base Plate fit Fender Stratocaster Pickups

Angle HDMI Clamp Lock Module for Blackmagic Micro Cinema Camera SmallRig 1773 Cage with Ugreen angle HDMI adapter developed by RADIOPROEKTOR. BMMCC HDMI port is rather shaky, especially when used with angle HDMI adapters, so i decide to develop a clamp to solve this problem. See development history of this product here http://www.bmcuser.com/showthread.php?18858 !!! Please note that this clamp designed to work with SmallRig Cage and Ugreen angle HDMI adapter only !!! Air Mail Worldwide shipping cost or UPS Express shipping cost should be added to cart separately. For any details contact me directly to radioproektor (@) gmail . com Recommended HDMI cables list: Sanho HyperThin HDMI Cable https://www.adorama.com/l/Home-Electronics/Home-Th... https://www.hypershop.com/collections/hdmi-cables Ugreen custom length low profile slim HDMI cable: https://www.ebay.com/itm/UGREEN-Premium-Metal-HDMI... 30cm-300cm length angle HDMI cables: https://www.ebay.com/sch/i.html?_nkw=30cm-300cm+hd... Assembled kit includes: 1x Angle HDMI clamp front and rear parts (CNC machined aluminum alloy, anodized in black color). 2x 1/4"-20 3/8" length button head black oxide screws. 2x M4 Stainless Steel grub screws. 1x 2mm allen wrench hex key. 1x Ugreen Angle HDMI adapter Weight: 35g Installation tutorial: Plug Ugreen HDMI adapter to the camera. Adjust and fix front element of the clamp. Adjust and fix rear element of the clamp. Slightly tight two small screws on rear element.

pickups tele  1pc unbranding for bridge position White  top

Guitar pickups Set (2 pc) humbucker  color - black   new

Voltmeter in bakelite housing M 45 M . Measuring range from 0 to 300 V. In good condition. Made by the Krasnodar plant of measuring instruments, USSR, 1985.         New. No chips or cracks. With documents. In stock.

Ready-made board of the metal detector Pirate. The size of the board 3/7cm. Speaker included. Working, tested boards. The Pirat metal detector is one of the most famous because of its simplicity and quite good characteristics.  This device is able to pick up coins under the ground at a distance of 15-20 cm, large metal objects - up to 120 cm. Tuning of the Pirate metal detector A properly assembled metal detector does not need fine tuning, but for fine tuning there are two variable resistors R12 and R13 in the circuit. To tune it, turn R12 and R13 until you get rare clicks in the speaker. Before tuning, turn on the metal detector and wait 10-20 seconds. Move all metal objects away from the search coil. Specifications Coin detection depth, to 20 - 22 cm Depth of detection of large objects, 100 - 120 cm Supply voltage, 9 - 14 V Current consumption, 60 - 70 mA Impulse current consumption, 1 - 2 A Board dimensions, 45 X 52 mm

Order from Tine part 2 6.06.2019 hoop earrings 22 * 14 = 308 earrings flowers 8 * 21 = 168 tulips 13 * 22 = 286 calla 5 * 46 = 230 peonies 2 * 59 = 118 1110 shipping 46 total 1156 3 parts in total

guitar pickup cover pair (2pc) spacing 50mm

1pc any color on pictures - Tele Guitar Pickup Bridge position

Feel the full-range dynamics and control. Specially engineered to deal with most hard to drive headphones on market. Just forget about the problem with difficult loads in terms of impedance or power consumption. A mode with a supply voltage of 80 volts of output stage all that features are providing clean transmission for signal up to 16 Watt on 32 Ohm load of output power.

power supply 12v 72W

CUSTOM GUITAR PICKUPS STRAT+HUMBUCKER (HSS) SUPERSTRAT all pups work and high quality B -15.5K M - 6.2K N - 5.7K

SET TELE GUITAR PICKUPS   NASHVILLE BEST VINTAGE TONE SOUND 3pcs pickups

The manual dough sheeter is designed for rolling any dough (prosphora, pasties, dumplings, khinkali, pizza, as well as the further production of lasagna and Italian pasta) with a thickness of 0-30 mm by mechanically rolling it between rolls. Two handles: on the left - rotation of the shafts (both shafts rotate simultaneously), on the right - stepped adjustment of the shafts spread (fixing the gap provides quick and accurate adjustment of the dough rolls). Made entirely of stainless steel. The set includes 2 clamps for secure fixation of the dough roller to the table. Roll length - 50cm Number of rolls - 1 pair Table tilt angle - 27 ° Designed for cafes and industries, as well as home use Roll spread - from 0.7mm to 30mm Connection type - manual Dimensions - 570x300x200mm (22.5 x 12 x 8 inches) Weight - 10kg (4.5 - 5lbs) Roll diameter - 60mm (2.35 inches) WE DO NO ASSUME COSTS OF TAXES ADDITIONAL IMPOSED BY THE CUSTOMS OF EACH COUNTRY. WE DO NOT ACCEPT RETURNS. Thank you!

NEW Home-made. Dual Band 2m 70cm Antenna jpole VHF/UHF roll Slim Jim J-Pole, connector SMA MALE Made from Twin-lead cable 300 ohm Ferrite choke installed on coaxial cable RG-174 (50 ohm)   Dual Band 2m/70cm 140mhz-149mhz has SWR not more than 2.0; 145,500 - SWR 1.1-1.3  works well on the 70cm band via 3rd harmonics also (SWR 1.47 - 2.0) Antenna length approx 1.5m Feedline length 4m. Will handle 60 watts. 6db of gain. total weight 150g. Items is new in good Working Condition! SHIPPING: I ship Worldwide from the East Europe (Ukraine) by registered Airmail. Items will be shipped from Ukraine every day after payment is received and verified. GUARANTEE. Returns Accepted, Buyer, 14 Days, Money Back. I hope to hear from you positive feedback.

NEW Home-made. Dual Band 2m 70cm Antenna jpole VHF/UHF roll Slim Jim J-Pole, connector SMA FEMALE Made from Twin-lead cable 300 ohm Ferrite choke installed on coaxial cable RG-174 (50 ohm)   Dual Band 2m/70cm 140mhz-149mhz has SWR not more than 2.0; 145,500 - SWR 1.1-1.3  works well on the 70cm band via 3rd harmonics also (SWR 1.47 - 2.0) Antenna length approx 1.5m Feedline length 4m. Will handle 60 watts. 6db of gain. total weight 150g. Items is new in good Working Condition! SHIPPING: I ship Worldwide from the East Europe (Ukraine) by registered Airmail. Items will be shipped from Ukraine every day after payment is received and verified. GUARANTEE. Returns Accepted, Buyer, 14 Days, Money Back. I hope to hear from you positive feedback.

3 Led bolbs SET

This is a beautiful handmade item. This table clock is made on neon retro tubes (nixie tubes). When turned on, the clock creates a Wi-Fi access point or connects to your home network via Wi-Fi and can synchronize the time via the internet. The clock is controlled and configured from a smartphone or computer using a web interface. The clock uses Nixie indicators Z574M (Germany) and the case is made of natural oak wood. Initial setting: - Turn on the clock - Enable Wi-Fi on your smartphone and connect to "NixieClock" Wi-Fi access point - In the browser, enter the address 192.168.4.1 - In the "Time setting" section, set the current time - In the "Clock setting" section, set the time zone and other parameters - In the "WiFi setting" section, set the name and password of your network (if necessary) - In the "LED setting" section, you can set the color and brightness of the LED backlight Enjoy! Features: - Time format: 12/24 time display - Effects preset Slot Machine every 10 minutes (preventing cathode poisoning) - Adjustable multicolor backlight - Lithium battery backup - Power adapter: input AC 100..240V, output DC 9..12V (US, EU or UK socket) Warning! Please after delivering keep devices in a room at least for 2 hours before turn it on. BOX CONTAINS: 1 x Nixie clock 1 x Power adapter