Home & Hobby

Feel the full-range dynamics and control. Specially engineered to deal with most hard to drive headphones on market. Just forget about the problem with difficult loads in terms of impedance or power consumption. A mode with a supply voltage of 80 volts of output stage all that features are providing clean transmission for signal up to 12 Watt on 32 Ohm load of output power.

Germanium Transistors for diy projects 

The "Wood Trunk" Triptych є надзвичайно приємним panel, така з природи цесамо у вашому інтер'єрі. Цей головний фокус є 3D panels, створені з дерева як добре, так і є знімки з multilayer sheets of birch veneer, різні thickness з 15mm to 40mm і більше. We create this beautiful decor by milling. Чому panel is obtained individual. Natural shades of birch veneer make on each of panels original pattern. Ви можете spend hours looking at thes patterns і enjoying them, арт-природи. Ми тільки використовуємо природні матеріали і котушки для наших фарб. Panel description: - матеріал: шпильки бруківки veneer (plywood) thickness 20-24 mm; - coating: oilwax (German manufacturer OSMO) - complete set: each part has special fastening from the back. In a set we add three dowels on which it is possible to hang these panels; - під panels є glued squares of felt, so as not to damage the wall;

Tannins Boisinage, also known as Boisé, is an oak extract of organic origin that made from oak blanks of varying degrees of firing using the patented Bousinage technology. An exclusively natural product, without flavors or dyes. Has a characteristic oak aroma with spicy, vanilla and nutty notes without any extraneous odors.

Enconder control knob "ERMAK" (Tuning knob, etc.) High quality materials. Rubber ring, blackened. Includes felt pads for braking. See photo. On request - Video Amazing quality, Solid and Comfortable Wonderful tactile sensations! For standard axle - 6 mm Diameter 50 mm (fit) Height - 22 mm The equipment setup/control knob is what you hold in Your hand when controlling Events! Turn the World in Your direction! TUNE YOUR LIFE P.S. Made for the ERMAK transceiver, but can be used with any equipment. Replace the old TUNING KNOB with this one! New sensations from controlling your equipment with the "ERMAK" Tuning Knob!

Handmade crochet daisy flower charm. Rear view mirror car charm, Amigurumi flowers car accessories. Use as car mirror hanging, bag charm, backpack charm. Cute gift box available. Flower size approx. 2 1/3" (6 cm.) in diametr. Flowers is made with cotton yarn and stuffed with hypoallergenic fiberfill. When folded, the length of the loop is about 6 1/2" (17 cm.) Hand made with love.

Used psu for microphones 

Precision power supply unit for tube amplifiers and equalizers, AC to DC, 220/110V, 2U rack mountable.

Old analague synthesiser 

Microchips for audio diy projects 

Used in good working order Specifications: Frequency range: 3150-20000 Hz Frequency response unevenness: 14 dB Sensitivity: 90 dB Operating power: 2W Harmonic distortion in the range 4000-10000 Hz: 3% Resistance: 8 ohms Nameplate power: 3 W Long-term power: 3W Short-term power: 6 W Main resonance frequency: 1200 – 2000 Hz

Audio tubes for amplifiers used

Ready-made board of the metal detector Pirate. The size of the board 3/7cm. Speaker included. Working, tested boards. The Pirat metal detector is one of the most famous because of its simplicity and quite good characteristics.  This device is able to pick up coins under the ground at a distance of 15-20 cm, large metal objects - up to 120 cm. Tuning of the Pirate metal detector A properly assembled metal detector does not need fine tuning, but for fine tuning there are two variable resistors R12 and R13 in the circuit. To tune it, turn R12 and R13 until you get rare clicks in the speaker. Before tuning, turn on the metal detector and wait 10-20 seconds. Move all metal objects away from the search coil. Specifications Coin detection depth, to 20 - 22 cm Depth of detection of large objects, 100 - 120 cm Supply voltage, 9 - 14 V Current consumption, 60 - 70 mA Impulse current consumption, 1 - 2 A Board dimensions, 45 X 52 mm

Looking for a high-quality  pulse metal detector  that can handle any task? Look no further than the  Clone PI W  with High-Quality Assembly - Brand New! This modern, microprocessor-based device is designed to search for metal objects in a wide variety of environments, including the ground, sand, walls, dense grass, and more. With interchangeable sensors of different sizes, you can easily customize your search to meet your specific needs. ( Replacement sensors are not included! ) This unit features a sleek black panel color , firmware 1.2.2m, and includes mating connectors to the sensor. The cases are  D110A , and the  battery 18650 is not included . The  maximum depth  of detection of objects is impressive, with a ring sensor (diameter 19cm) able to detect a coin with a  diameter of 25mm   up to 30cm  away, and a helmet  up to 60cm  away. The maximum depth of  up to 150cm .  With a depth loop probe (1,2х1,2m),  Helmet - up to 140cm ,  steel barrel 200l  -  up to 200cm,   the maximum depth is  up to 300cm ! Indications are provided through  visual LED  and  audio multitonal alerts , while the device operates in  static search  mode. With a fully charged battery, continuous operation time can last  up to 15 hours . Please note that the operating conditions include an air temperature range of -10...+50ºС, atmospheric pressure of 710...800 mm Hg, and relative humidity up to 95% at temperature +25ºС. It is crucial to avoid operating the unit with the cover removed or with damaged insulation of the sensor cable. This pulse metal detector is based on the principle of excitation of pulse eddy currents in the metal object and measurement of the secondary electromagnetic field which induces these currents. With the built-in microprocessor, the device analyzes this over-radiated signal and produces the corresponding indication of the detected object. Shipping times  can range from 2 weeks to 45 days depending on logistics. Please note that the current situation may cause difficulties, but parcels are still being delivered. Get your hands on the Clone PI W with High-Quality Assembly - Brand New today!

Led lamp 7 W, SDAL-R 07

Sadhu Boards with galvanized nails, fair engraving and personalisation Board for beginner, 10 mm nail pitch