Costume Accessories

Professional realistic fake beard for cosplay, larp games, theater. Hand made on the lace front.

Professional realistic fake beard for cosplay, larp games, theater. Hand made on the lace front.

Professional realistic fake beard for cosplay, larp games, theater. Hand made on the lace front. Set in stock!

This Men's tracksuit is perfect for layering up when heading off to the gym, joggin, walking, or wearing something stylish when dressing casually. Crafted with a lightweight, breathable material, this tracksuit is the perfect compliment to any active wear wardrobe. It comes with two pockets and a full zip front for a secure and comfortable fit. The pants have 2 pockets too. The bottom of the pants is flat, without cuffs, for a better fit and a more modern look.

Professional set of wig, fake beard and fake mustache for Santa Claus. Hand made on the lace

Set of fake mustache and wig "Jack the ripper" . Handmade on lace.

Professional realist fake mustache for cosplay, larp games, theater. Handcrafted on the lace front.

Professional realistic fake beard for cosplay, larp games, theater. Hand made on the lace front.

Individual order.Handmade set of wig with sideburns, mustache, beard, eyebrows on lace.

Professional set of wig, fake beard, two fake mustache  for Santa Claus. Hand made on the lace.

Professional realistic fake beard for Santa Claus, cosplay, larp games, theater. Hand made on the lace front. Made from synthetic hair.

Set of fake handmade syntetic mustaches on lace

Professional realistic fake beard for cosplay, larp games, theater. Hand made on the lace front.

Gray-haired man's wig. The gray synthetic hair wig with lace front.

Professional realist fake mustache for cosplay, larp games, theater. Handcrafted on the lace front.

Gray-haired man's wig. The gray synthetic hair wig. A small haircut and adjustment of styling is possible according to your wishes.

Fake beard and mustache set. All questions are discussed in a personal message. 

Professional realist fake mustache for cosplay, larp games, theater. Handcrafted on the lace front.

New leotard for rhythmic gymnastics, height 160 cm, waist 130 cm. Velvet + biflex. Chest 80-84, waist 67-69, hips 77-80. Length 63 cm. Sleeve 53 cm.

Leotards for Rhythmic Gymnastics. New. Height 134+ cm. Chest 62-68, waist 54-60 hips 64-68. Front 56 cm, arch 114 cm.

In the photo you can see my work from hard foam before. I am currently working on a plastic model that will be much better. Blade length - 120cm or 47inch + Handle length. Total lenght - 70inch or 178 cm. The handle with the guard is removable, the sword will come to you in a large box, after opening which you will need to assemble it. This is done very simply and reliably. The sword is made of dense EVA foam, painted with fluorescent paints. In the dark, the sword glows blue. The sword takes on an additional blue tint when exposed to ultraviolet rays. In room lighting, the sword also has a bluish tint, but less saturated. The blade is painted with more than 6 layers of paint, a lot of manual labor has been invested in the sword. This item is handmade, sealed for weather proofing and constructed with the most rigorous safety standards in mind. It is latex free, and requires no maintenance. Please check out our Facebook, https://www.facebook.com/groups/135840726834669 Viber and telegram +380994117768 Also we may make another type of weapon - Two-handed sword of fire • Two-handed sword of the executioner • Claymore • Sword of the wolf knight Dragon Blood Sword • Moonlight Sword • Justice Sword • Twin Princes Sword Undead Slayer Sword • Black Knight Sword • Storm Lord • Bastard Sword Volnir's Sacred Sword • Flamberge • Onyx Blade (AoA) • Gael's Two-Handed Sword (TRC) Gundir's Halberd • Astor Spear • Vordt's Great Hammer • Old King's Great Hammer • Demon's Great Ax • Dragonslayer's Great Ax • Dragonslayer's Great Shield • Jorm's Great Shield • Two-Handed Fire Sword • Dark Moon Longbow • Enchanted Dancer Swords • Cleric's Candelabrum • Storm Blade • Dragonslayer Spear-Sword • Fist of the Demon • Sword of the Wolf Knight • Sword of Moonlight • Sword of Lorian • Sword of Justice • Sword of the Twin Princes • Fel Sword • Sword of the Undead Slayer • Sword of Farron • Jorma's Enormous Machete • Rapier of the Crystal Enchant • Volnir's Sacred Sword • Lothric's Sacred Sword • Fride's Great Scythe (AoA) • Ariandel's Rose (AoA) • Decaying Blade (TRC) • Gael's Two-Handed Sword (TRC) • Rapid Fire Crossbow (TRC)

The dagger is great for LARP or cosplay. Made from EVA foam with a glass core inside. Color - graphite, with the application of chips and cracks, cracks glow in the dark. The product is covered with rubber varnish. The dagger keeps its shape and at the same time is flexible and is not able to harm a person. This item is handmade, sealed for weather proofing and constructed with the most rigorous safety standards . It is latex free, and requires no maintenance. Size 50*7*2,5 cm /19.7*2.7*1 inches.

Made in the style of an ice dagger, suitable for ice magic.Сrystal dagger Made from polyethylene foam (EVA), durable and safe at the same time. It is based on an elastic fiberglass rod. The tip of the dagger is reinforced with silicone, absolutely safe for playing. 100% handmade, painted with bright fluorescent colors that glow when exposed to ultraviolet rays. Decorated with rune inscription (default "frost blade") that can be designed to your taste. This item is handmade, sealed for weather proofing and constructed with the most rigorous safety standards . It is latex free, and requires no maintenance. Size 50*7*2,5 cm /19.7*2.7*1 inches. Any extras can be discussed. Please check out our Facebook, https://www.facebook.com/groups/135840726834669 My Watsapp, Viber and Telegram +380638925855 Serhii Krasa

A popular game inspired us to make such a shield. Such a shield in a single copy is stored in our warehouse. The shield is ready for shipment to your country in the shortest possible time. The backboard is made of 0.15inch or 4mm plywood which provides maximum strength and lightness of construction. The shield has an arm mount and a forged handle, just like in real medieval artifacts. The edging is made of steel, riveted to the shield by hand. The drawing was applied by our master with a brush. All of our shields are equipped with a belt clip that can be used to hang it on the wall. Shield size = 39*23 inch 100*60см If you need a slightly different product, we can make to order. I can also send your order with extra delivery, I indicated in the type of product

Feather headdress Made of different types of plastic, feathers, and RGB LEDs For head size 55 cm The hat changes color using a smartphone app. Many different functions and glow settings. Suitable for a Shaman, Chieftain, Lich, Mage, Sorcerer, Necromancer or whatever you can think of.

Medieval knife, soft, made of foam. Inside the foam, a silicone rod is built in to hold the shape. The length is 5 inch. Blade width 1.1 inch The length is 13-15cm. Blade width 3cm This item is handmade, sealed for weather proofing and constructed with the most rigorous safety standards in mind. It is latex free, and requires no maintenance. Please check out our Facebook, https://www.facebook.com/groups/135840726834669 My Watsapp, Viber and Telegram +3809941177685 Serhii Krasa

This is a decorative cloak that is perfect for the image of an archer, scout. This raincoat is lightweight and has a medieval cut. This is handmade, we sew raincoats ourselves, a specialist with many years of experience in cutting and sewing works in our workshop. This cloak can be used for role-playing games, photo shoots, cosplay. Fans of Tolkien's works, as well as trilogies, will be delighted with such a cloak. We sew to order from natural materials - twill. When ordering, please indicate your height and shoulder width. Such a cloak is a great disguise for a scout, or if you need to go unnoticed through Mordor. The shade may differ from the photo, but we try to adhere to the original as much as possible. Also keep in mind that for this price you will only receive a raincoat with a hood, if you need more clothes, and I do not have the necessary items, write to me, we will discuss individual tailoring. Please check our group on https://www.facebook.com/groups/135840726834669 My Watsapp, Viber and Telegram +3809941177685 Serhii Krasa The Rangers of Ithilien, also known as the Rangers of the South, and the Rangers of Gondor, were the elite troops of the Southern Kingdom of the Dúnedain that scouted and guarded Ithilien. This group was first formed around T.A. 2901 by order of the Steward of Gondor, when enemies from Mordor and Minas Morgul began to infiltrate Ithilien. One of the main bases of the pathfinders was Henneth Annun (translated from Sindarin - "Window of Sunset"). These Pathfinders were the descendants of those who lived in Ithilien before the invasion of it by enemies and, in a more distant retrospect, the descendants of the ancient Numenoreans. Like their distant cousins, the Pathfinders of the North, the Pathfinders of Ithilien spoke more Sindarin (or one of its dialects) than the common language (Westron). The Pathfinders were adept at using weapons such as bows, spears, and swords. Their beautifully camouflaged green and brown clothing aided them in their combat and reconnaissance missions, which mainly consisted of crossing the Anduin and destroying small groups of enemies in the occupied territory in a style strongly reminiscent of guerrilla warfare. During the time described in The Two Towers, the Rangers of Ithilien were led by Faramir, the youngest son of Steward Denethor. In the Fourth Age, most of the Pathfinders of the South are believed to have become members of the White Detachment - the Guardsmen of Faramir, who, with the accession of Aragorn, became the first lord of Ithilien.

Hello dear friends, our workshop will be happy make some real big sword to you!. made to order. The product in the photo was made by us and successfully sent to the happy owner. In our catalog there is already a sword of similar size, you can look at Bluemoon Greatsword. The sword will be made of EVA foam and a rod of textolite or PVC. This is handmade work on the manufacture of such a sword will take an impressive number of hours of work, which we convert into the cost of the product. Such a sword will be completely unique, it will be a single copy. Keep in mind that the size of the parcel will be large. The total length of the sword will be approximately 70inch/178 cm We will also install a neon light that will glow white. We can also make custom weapons such as - Genshin Impact "Captive lighthing" lighthing weapon, Haran Geppaku Futsu, Slicing Mist, heavenly sword, Falcon Sword, Spade Slicer, Pledge of Freedom, Precious Pool, Montenegrin long sword, black sword, Ceremonial sword, Steel sting, Prototype: Malice, Corrupted Desire, sword flute, Sword of Favonius, Sword of Descent, Sword of the aristocrats, Cinnabar spindle, dragon roar, Flash in the dark, Amenoma Kageuchi, cold blade, fillet knife, Dark Iron Sword, harbinger of the dawn, Traveler's Sword, Sky Rider Sword, silver sword, blunt sword, or any other weapon.

We made this shield based on the popular game The shield is made of high quality plywood with steel rivets around the perimeter, durable and lightweight. The shield has a brown base, on top we apply a white paint with an aging effect. We also apply a drawing in the form of the sun, paint in natural colors that does not harm the environment and is resistant to atmospheric precipitation. The edging is made of wood. The size of the shield 23 inches or 60 centimeters, Board thickness 0,35 inch or 9mm, A board of this thickness provides serious protection. In the center of the shield we attach the handmade handle of our blacksmith. You will be able to personally verify the craftsmanship of hand-forged steel making of our shields. Also, for each shield, we make a loop for mounting on the wall so that you can hang it in your room, which it will decorate)

Good afternoon!) The color of the cloak is light red, similar to the color of a carrot. This cloak is already sewn and waiting for you, the material - wool more than 50 percent. Ordering this item will be taken by our experienced sewing master. This cloak can be used for role-playing games, photo shoots, cosplay. Fans of medieval ages works, as well as trilogies, will be delighted with such a cloak. Such raincoats were worn by all people, without exception, since the umbrella was not common in the Middle Ages, and this was the only way not to get wet to the skin. Viber and Telegram +380994117768 Serhii Krasa

The board is made of 4mm plywood. At the edge, a plywood edging is glued and painted in steel color, the end of the shield is 8mm thick. The radius of the shield is 58cm or 22.8inch, the boss is made of steel. Such a shield is lightweight and durable, which compares favorably with the rest of our product line. Please check out our Facebook, https://www.facebook.com/groups/135840726834669 My Whatsapp, Viber and telegram +3809941177685

Viking-style armor made of plastic and foam. We can also make armor to order according to your sketches.

We make this shield to order, from high quality plywood. We make two versions of the shield 1) The boss was forged out of steel by our blacksmith. Plywood board 0,23-0,31 inch or 6-8mm thick. All drawings and patterns are made by our artist from wood. The handle is made of steel. If you want to improve the model, write me a letter, I will be happy to discuss with you Shield size 23 inches or 60 centimeters Weight about 70 ounce or 2.120 kg 2) The boss was made of foam or polyurethane. Plywood board 0,15 inch or 4mm thick. All drawings and patterns are made by our artist from EVA foam. The handle is made of wood. If you want to improve the model, write me a letter, I will be happy to discuss with you. Shield size 23 inches or 60 centimeters Weight about 35 ounce or 1 kg 3) The boss was made of foam or polyurethane. Plywood board 0,15 inch or 4mm thick. All drawings on the shield are printed in the printing house and pasted on the shield. Since this will be a printed drawing, the details will not look three-dimensional. The handle is made of wood. If you want to improve the model, write me a letter, I will be happy to discuss with you. Shield size 23 inches or 60 centimeters Weight about 35 ounce or 1 kg For any of the options, we attach a loop for fastening to a wall or a belt.

This item is made to order The handle is made with a hard PVC shaft, the shell is made of soft EVA foam, the blade is made of EVA foam. This is completely safe and is not capable of causing harm. Size : 12*15 inch or 30*40cm This item is handmade, sealed for weather proofing and constructed with the most rigorous safety standards in mind. It is latex free, and requires no maintenance. Please check out our Facebook, https://www.facebook.com/group... Viber and telegram +380994117768

Rune dagger for pyromancer, for LARP. Made from polyethylene foam (EVA), durable and safe at the same time. It is based on an elastic fiberglass rod. The tip of the dagger is reinforced with silicone, absolutely safe for playing. 100% handmade, painted with bright fluorescent colors that glow when exposed to ultraviolet rays. Decorated with rune inscription (default "fire blade") that can be designed to your taste. This item is handmade, sealed for weather proofing and constructed with the most rigorous safety standards . It is latex free, and requires no maintenance. Size 50*7*2,5 cm /19.7*2.7*1 inches. Any extras can be discussed. Please check out our Facebook, https://www.facebook.com/groups/135840726834669 My Watsapp, Viber and Telegram +380994117768 Serhii Krasa

Ax mutilated in battles, gray with white inserts. When ordering, write to me what you are buying for, for role-playing games or cosplay, during production we will select the foam density you need. We can make a soft ax, or we can make a hard weapon. Total length = 61 inch, blabe size = 20*25 inch or 155*60*51 centimeters We also make products according to your sketch, copies from games and films ... Write me a letter, I will be glad to communicate) This item is handmade, sealed for weather proofing and constructed with the most rigorous safety standards . It is latex free, and requires no maintenance. Please check out our Facebook, https://www.facebook.com/groups/135840726834669 My Watsapp, Viber and Telegram +380994117768 Serhii Krasa

The board is made of pine boards 20mm thick, carefully hewn to the edge with a thickness of 10mm. This ensures its high strength and lightness. The drawing is applied by our artist, beautiful drakars will be on your shield!) The paint is environmentally friendly, does not shine, but if you need we can make a glossy shield. The edging is made of genuine leather 4mm thick. The umbon is steel, made of steel 2mm thick, nailed on 4 nails, which corresponds to the historical counterparts. For each shield, we make a loop on the handle for mounting on the wall The sizes we make : 58cm - 22.8inch/ 65cm - 25.5inch / 70cm - 27.5inch / 75cm - 29.5inch / 80cm - 31.5inch Please check out our Facebook, https://www.facebook.com/groups/135840726834669 Viber and telegram +380994117768 You can watch a small promotional video about the production of shields in our workshop https://youtu.be/SlDWRosGFKE

Ice Runed Dagger +5 against fire creatures) First two photos are latest versions of the this dagger type. They are distinguished by an additional rune (feoh). It is handmade and each dagger is unique. Made from polyethylene foam (EVA), durable and safe at the same time. It is based on an elastic fiberglass rod. The tip of the dagger is reinforced with silicone, absolutely safe for playing. 100% handmade, painted with bright fluorescent colors that glow when exposed to ultraviolet rays. Decorated with rune inscription (default "frost blade") that can be designed to your taste. This item is handmade, sealed for weather proofing and constructed with the most rigorous safety standards . It is latex free, and requires no maintenance. Size 50*7*2,5 cm /19.7*2.7*1 inches. Any extras can be discussed. Please check out our Facebook, https://www.facebook.com/groups/135840726834669 My Watsapp, Viber and Telegram +380994117768 Serhii Krasa

Silver is available. We made this shield inspired on the popular game The shield is made of high quality plywood with steel rivets around the perimeter, durable and lightweight. The shield has a brown base, on top we apply a white paint with an aging effect. We also apply a drawing in the form of the sun, paint in natural colors that does not harm the environment and is resistant to atmospheric precipitation. The edging is made of wood. The size of the shield will be 23 inches or 60 centimeters, Board thickness 0,35 inch or 9mm, A board of this thickness provides serious protection. In the center of the shield we attach the handmade handle of our blacksmith. You will be able to personally verify the craftsmanship of hand-forged steel making of our shields. Also, for each shield, we make a loop for mounting on the wall so that you can hang it in your room, which it will decorate)

The board is made of 0.15-0.23 inc (4-6mm) plywood. At the edge, a plywood edging is glued and painted in steel color, the end of the shield is 0,31-0.39 inch, or 8-10mm thick. The diameter of the shield is 23 inch (58cm), the boss is made of steel. Such a shield is lightweight and durable, which compares favorably with the rest of our product line. We can make three different edging options for this board in foam, wood or steel. We can write one sentence on the back of the shield, from left to right, from above, in gold color, in Elvish & Dwarvish, Tengwar or Rune, Quenya, Sindarin, Cyrilic or Latin. Write which font to choose. The weight of the board with wood edging will be about 4.1 lbs. Please check out our Facebook, https://www.facebook.com/groups/135840726834669 Viber and telegram +380994117768

The foam has good flexibility, wear-resistant properties, resistant to temperature changes. You can buy this listing and we will make a sword according to the given dimensions = 83cm Blade, 27cm Handle (including front and rear handle caps) 10cm wide near guard 6.5cm Hand Guard Width/thickness 21.5cm long guard It is handmade, we do not use the 3D printer and CNC machines.

Two-handed double-axe made of EVA foam. Total length is 127 cm/50 inches. The central rod is PVC pipe. The blade is reinforced inside with silicone rods. This axe is not suitable for LARP due to it's hardness. Although we can make a model suitable for LARP by order. We make prop copies from various games, cartoons, animations or motion pictures according to your order within the agreed time frames. The price is negotiable, depending on the size and complexity of the product. This item is handmade, sealed for weather proofing and constructed with the most rigorous safety standards . It is latex free, and requires no maintenance. Please check out our Facebook, https://www.facebook.com/groups/135840726834669 Viber and telegram +380994117768

You can choose from two options, with a round hood and a pointed one. The material of the raincoat really protects from rain and sun, has good resistance to rain drops. Natural cotton twill weave material, excellent wet resistance. The raincoat is dense, does not shine through in the sun. The length is designed for height from 165 cm and above. Free shipping usually takes up to 14 days This is handmade, we sew raincoats ourselves, a specialist with many years of experience in cutting and sewing works in our workshop. This cloak can be used for role-playing games, photo shoots, cosplay. Fans of Tolkien's works, as well as trilogies, will be delighted with such a cloak. We sew to order from natural materials - twill. When ordering, please indicate your height and shoulder width. Such a cloak is a great disguise for a scout, or if you need to go unnoticed through Mordor. The shade may differ from the photo, but we try to adhere to the original as much as possible. Also keep in mind that for this price you will only receive a raincoat with a hood, if you need more clothes, and I do not have the necessary items, write to me, we will discuss individual tailoring. Please check our group on https://www.facebook.com/groups/135840726834669 My Watsapp, Viber and Telegram +380994117768 Serhii Krasa

This soft shovel is based on historical examples of real trench shovels. It is completely handmade, without the use of CNC machines. Designed with all safety standards for LARP games. Suitable for airsoft and other games. Cannot harm a person because it is soft.

Hello everyone, this is a future sword project and I'm looking for someone to order it. It will be completely handmade, no 3D printing. Why is it so much better? The sword will have a solid fiberglass base that will never break. From the outside, there will be a dense foam of 100 kg/m3, the hardness of this foam will resemble rubber. Patterns will be engraved. This will be a unique work that you will not find anywhere else. I propose to implement it in several versions, but if you want to make changes to the project, you can write to me. Please subscribe to my Instagram https://www.instagram.com/serhiikrasa/ You can also write to me - my Whatsapp +380994117768

Professional realistic fake beard for cosplay, larp games, theater. Hand made on the lace front.

Beautifully hand crafted of natural, leather toiletry bag beautifully The leather is soft and slightly distressed and all stitching is done by hand using wax linen thread for extra durability.

Set of fake beard and mustache on lace. Handmade.