Porcelain doll. Folk Dolls Art. Doll. Puppet. Dummy. Collectible doll

Old Photo Tank for Developing Photographic Film. Made in the USSR in the 1980s. Vintage. Soviet Photo Accessories. This is an old photo tank for developing photographic film (35 mm). For Camera. Made in the USSR in the 1980s. A wonderful exhibit for collectors, interior decoration in retro style. You can recreate an old photographic laboratory. The photo tank is working, if you want, you can try to develop the film yourself as photographers did in the 80s. Material: Case Material - Carbolite. The material of the insides of the photo tank is plastic. Dimensions: diameter - about 13.5cm (5.31 inch) height - about 9.0 cm (3.54 inch). Condition: Good vintage condition. Was in use. The color in the photo may vary depending on the monitor's settings and light reflection. Status in the photos. High price? Write a proposal to your price. If you want to buy multiple lists, please contact to discuss the shipping cost as sending multiple lists in one package will be cheaper. Delivery time: USA: 25-40 days Europe: 14-30 days Canada, Australia: 30-60 days Free shipping from Ukraine. To our great regret, due to changes in customs regulations, orders are not sent to Germany. All local taxes associated with the delivery of the order are paid by the buyer. To all customers I happily accept PayPal. If You want to pay for Visa, Master Card, AMEX, Diners - click pay with PayPal and then choose the second option Pay by card. Dear Customers, please be aware that some items in my shop are vintage so they all may have some signs of years. Please feel free to send me a message with any questions about items before purchasing and I will be glad to answer you. If for any reason you are unhappy with your purchase, please return your unused item within 7 days after delivery (accordingly to the tracking). After receiving it I will be exchange or refund you payment minus shipping cost and Western Bid&Paypal fees. If you'd like to cancel your order because of my mistake I will refund 100% of your payment as long as the order isn't shipped yet. Shop: https://www.etsy.com/shop/Mity... Thank you for visiting my store. If anyone wants to open a store on ETSY and get 40 free listings (lots), follow the link, open a store, trade with pleasure: https://etsy.me/3CpU4Zr If you liked the store, let's have a coffee)))) https://www.buymeacoffee.com/p...

SMZ S-3A is a two-seater four-wheeled motorized vehicle, mass-produced from 1958 to 1970. The car used an Izh-49 motorcycle engine with 8 horsepower. A total of 203,291 vehicles were produced. From the point of view of design and performance, the S-3A had both significant advantages and significant disadvantages. The main problem was that, being a motorized wheelchair for people with disabilities, the car was not intended for long and long trips. The S-3A was quite heavy (425 kg when loaded), labor-intensive and expensive to manufacture due to the all-metal body with a space frame made of chromansil pipes. On the other hand, by “automotive” standards it had poor dynamics (maximum speed 60 km/h), insufficient cross-country ability due to small wheels and weak engine thrust. The comfort and design of the open body also left much to be desired, and perhaps the only advantage of the two-stroke motorcycle engine used on the sidecar was the simplicity of the design; other indicators - power, fuel consumption (up to 5 l/100 km), durability, noise - did not stand up to criticism. At the same time, the overall simplicity and maintainability of the design partially compensated for its imperfections and low technical characteristics, making the car unpretentious in operation; the extremely low price of gasoline in those years made it possible not to notice its relatively high consumption. Model made by DeAGOSTINI, 1/43 scale. The body of the model is made of metal, the rest of the material is plastic. Model in good vintage condition. The model was kept in a special rack. A perfect piece for collectors or as a gift for a child. State of the photo. The color in the photo may vary depending on the monitor's settings and light reflection. Dimensions:  Length - about 6.0 cm (2.36 in.)  Width - about 3.1 cm (1.22 in.) Height - about 3.1 cm (1.22 in.). High price? Write a proposal to your price. If you want to buy multiple lists, please contact to discuss the shipping cost as sending multiple lists in one package will be cheaper. Delivery time:  USA: 25-40 days  Europe: 14-30 days  Canada, Australia: 30-60 days Free shipping from Ukraine. To our great regret, due to changes in customs regulations, orders are not sent to Germany. All local taxes associated with the delivery of the order are paid by the buyer. To all customers I happily accept PayPal. If You want to pay for Visa, Master Card, AMEX, Diners - click pay with PayPal and then choose the second option Pay by card. Dear Customers, please be aware that some items in my shop are vintage so they all may have some signs of years. Please feel free to send me a message with any questions about items before purchasing and I will be glad to answer you. If for any reason you are unhappy with your purchase, please return your unused item within 7 days after delivery (accordingly to the tracking). After receiving it I will be exchange or refund you payment minus shipping cost and Western Bid&Paypal fees. If you'd like to cancel your order because of my mistake I will refund 100% of your payment as long as the order isn't shipped yet. Shop: https://www.etsy.com/shop/Mity... Thank you for visiting my store. If anyone wants to open a store on ETSY and get 40 free listings (lots), follow the link, open a store, trade with pleasure: https://etsy.me/3CpU4Zr If you liked the store, let's have a coffee)))) https://www.buymeacoffee.com/p...

NATI-2 was designed in 1931 and built in 1932. A rare model, since it was planned to build ten NATI-2s, but the resources allowed for the construction of only five, and in practice it was possible to assemble six engines, five chassis and five bodies, but only three full-fledged vehicles were assembled. Its features included an air-cooled engine, a tubular backbone frame, aluminum pistons, independent rear wheel suspension and no differential. The chassis base was lengthened to 2730 mm to accommodate pickup and phaeton bodies. The first five prototypes were equipped with overhead valve engines. For the following NATI-2 cars, lower valve engines were developed, which weighed as much as 20 kg less. The four-cylinder engine produced 22 horsepower at 2,800 rpm. With a fully loaded weight of 730 kg, the car reached speeds of up to 75 km/h.  After the car was built, around 1933, there was a lot of controversy about the success of the design of this car. The air cooling system received unanimous recognition and was liked by everyone. But the design of the engine remained a controversial issue. It would be possible to reduce its volume and power, as many believed, and this would lead to greater efficiency of the car. But others believed that the car would have lost a lot in its driving qualities and technical characteristics. Everyone remained to their own opinion. In those years, the idea of motorizing the country was very popular and all authorities, media and individuals were engaged in propaganda activities on this topic. The public organization Avtodor was also involved in such propaganda; it was they who sponsored the construction of the first samples of the NATI-2 model. Newspapers constantly published letters from readers, where the latter expressed a desire to buy a car. People would like a car that would be easy to maintain, well suited to the road conditions of the USSR, have a fairly soft suspension and handle well on dirt roads, be economical and affordable. Everyone wanted to own their own car, because there were more and more motorists, and amateur clubs were created everywhere, even in villages. In this regard, Avtodor enthusiastically undertook to finance the serial production of NATI-2, hoping that this car would become a people's favorite. But these global plans were not destined to come true, since at the same time the Gorky Automobile Plant was already being built in the Soviet Union (producing GAZ cars). Therefore, it was decided not to spend money on another automobile production. Model made by DeAGOSTINI, 1/43 scale. The body of the model is made of metal, the rest of the material is plastic. Model in good vintage condition. The model was kept in a special rack. A perfect piece for collectors or as a gift for a child. State of the photo. The color in the photo may vary depending on the monitor's settings and light reflection. Dimensions:  Length - about 8.8 cm (3.46 in.)  Width - about 3.3 cm (1.30 in.)  Height - about 3.7 cm (1.45 in.). High price? Write a proposal to your price. If you want to buy multiple lists, please contact to discuss the shipping cost as sending multiple lists in one package will be cheaper. Delivery time:  USA: 25-40 days  Europe: 14-30 days  Canada, Australia: 30-60 days Free shipping from Ukraine. To our great regret, due to changes in customs regulations, orders are not sent to Germany. All local taxes associated with the delivery of the order are paid by the buyer. To all customers I happily accept PayPal. If You want to pay for Visa, Master Card, AMEX, Diners - click pay with PayPal and then choose the second option Pay by card. Dear Customers, please be aware that some items in my shop are vintage so they all may have some signs of years. Please feel free to send me a message with any questions about items before purchasing and I will be glad to answer you. If for any reason you are unhappy with your purchase, please return your unused item within 7 days after delivery (accordingly to the tracking). After receiving it I will be exchange or refund you payment minus shipping cost and Western Bid&Paypal fees. If you'd like to cancel your order because of my mistake I will refund 100% of your payment as long as the order isn't shipped yet. Shop:  https://www.etsy.com/shop/Mity... Thank you for visiting my store. If anyone wants to open a store on ETSY and get 40 free listings (lots), follow the link, open a store, trade with pleasure: https://etsy.me/3CpU4Zr If you liked the store, let's have a coffee)))) https://www.buymeacoffee.com/p...

Moskvich-402 is a Soviet small-class passenger car, produced in 1956-1958. A total of 87,658 Moskvich-402s were produced. To create this model, the USSR purchased serial models of foreign cars - Italian Fiat 1100 and Lancia Aurelia, French Simca Aronde and Citroen 2CV, English Hillman Minx, Ford Consul and Jovett Javelin, German Ford Taunus 12M. The car had a spacious and comfortable body with a separate trunk. The design was quite modern at that time. Moskvich had a fairly high level of interior trim, was equipped with a heater with a windshield de-icer, flashing turn signals with self-return, a radio. It is interesting that in those years the cost of electronic equipment was so significant that the press seriously discussed the question of whether all Moskvich cars should be equipped with a radio receiver, or only on individual orders, since a radio receiver significantly increases the cost of the car and many buyers would prefer to save this amount. The main drawback of the 402 model was the weak, morally obsolete low-valve engine, the design of which was developed back in the mid-1930s. Model made by DeAGOSTINI, 1/43 scale.  The body of the model is made of metal, the rest of the material is plastic. Model in good vintage condition. The model was kept in a special rack. A perfect piece for collectors or as a gift for a child. State of the photo. The color in the photo may vary depending on the monitor's settings and light reflection. Delivery time: USA: 25-40 days Europe: 14-30 days Canada, Australia: 30-60 days Free shipping from Ukraine. To our great regret, due to changes in customs regulations, orders are not sent to Germany. All local taxes associated with the delivery of the order are paid by the buyer. To all customers I happily accept PayPal. If You want to pay for Visa, Master Card, AMEX, Diners - click pay with PayPal and then choose the second option Pay by card. Dear Customers, please be aware that some items in my shop are vintage so they all may have some signs of years. Please feel free to send me a message with any questions about items before purchasing and I will be glad to answer you. If for any reason you are unhappy with your purchase, please return your unused item within 7 days after delivery (accordingly to the tracking). After receiving it I will be exchange or refund you payment minus shipping cost and Western Bid&Paypal fees. If you'd like to cancel your order because of my mistake I will refund 100% of your payment as long as the order isn't shipped yet. Shop: https://www.etsy.com/shop/Mity... Thank you for visiting my store. If anyone wants to open a store on ETSY and get 40 free listings (lots), follow the link, open a store, trade with pleasure: https://etsy.me/3CpU4Zr If you liked the store, let's have a coffee)))) https://www.buymeacoffee.com/p...

Vintage Movie camera. USSR. Filming camera "Quartz-M". The Quartz-M film camera was produced in 1961-1968. Camera operation is not guaranteed. The camera mechanism is manually wound and the motor is running. Whether the other elements of the caiera work is unknown. The movie camera is offered as a wonderful exhibit for collectors, interior decoration in retro style. You can recreate an old photographic laboratory. State of the photo. The set includes: - movie camera with screw-on handle and 2 film rolls, - spare roll for film, - lens and photocell covers, - handle for rewinding the film, - light filters for the lens - yellow ЖС-17, НС-4x, 2x and 4x, - a light filter for a photoexposure meter - neutral НС-4x (with a protective white case), - lenses per objective - 0.8; 1.7; 2.75, - a box for lenses and light filters. WARNING - lenses and lens filters are curled together! Filming camera "Quartz-M" is intended for shooting professional and educational films. The amateur movie camera "Quartz-M" is an improved export model of the movie camera "Quartz-2". The built-in exposure meter provides a semi-automatic lens aperture setting when shooting. This is based on the electromechanical connection between the aperture of the shooting lens and the aperture of the photocell of the exposure meter. The semi-automatic aperture setting is only calculated for a frame rate of 16 frames per second. Main technical characteristics: Film dimensions - 16 mm (2×8). The aspect ratio is 3.55×4.9 mm. The shooting frequency is 12, 16, 24, 48 frames/sec. Shooting modes: cine shooting, single-frame shooting, self-shooting (within the limits of the full spring winding). The Jupiter-24 lens is an enlightened five-element anastigmat with a focal length of 12.5 mm and a 1:1.9 relative aperture. The sight is telescopic with a magnification of 0.8x. The lens aperture control is semi-automatic (at a shooting frequency of 16 frames/sec), at other frequencies - manual. Camera charging - reel. The overall dimensions of the chamber are 120×62×145 mm. Weight (without accessories) - 1 200 g. The color in the photo may vary depending on the monitor's settings and light reflection. High price? Write a proposal to your price. If you want to buy multiple lists, please contact to discuss the shipping cost as sending multiple lists in one package will be cheaper. Delivery time: USA: 25-40 days Europe: 14-30 days Canada, Australia: 30-60 days Free shipping from Ukraine. To our great regret, due to changes in customs regulations, orders are not sent to Germany. All local taxes associated with the delivery of the order are paid by the buyer. Dear Customers, please be aware that some items in my shop are vintage so they all may have some signs of years. Please feel free to send me a message with any questions about items before purchasing and I will be glad to answer you. If for any reason you are unhappy with your purchase, please return your unused item within 7 days after delivery (accordingly to the tracking). After receiving it I will be exchange or refund you payment minus shipping cost and commissions of ETSУ and payment systems. If you'd like to cancel your order because of my mistake I will refund 100% of your payment as long as the order isn't shipped yet. Shop: https://www.etsy.com/shop/Mity... Thank you for visiting my store. If anyone wants to open a store on ETSY and get 40 free listings (lots), follow the link, open a store, trade with pleasure: https://etsy.me/3CpU4Zr If you liked the store, let's have a coffee)))) https://www.buymeacoffee.com/p...

Vintage pen and pencils holder. Stand for pens and pencils. Pencil holder desktop decor. Organizer on the desktop. Vintage. Made in the USSR in the 80s. It is made in the form of a boot, which stands on a horseshoe. ATTENTION! Inside there are black spots from the ink pen. Was in use. Good vintage condition. A wonderful exhibit for collectors, interior decoration in retro style. Material: plastic. Dimensions: Height - аbout 14 cm (5.51 inches) Width (from toe to end of spur) - about 13.5 cm (5.31 inch) Horseshoe Length - about 8.7 (3.42 inches) Horseshoe Width - about 8 cm (3.15 inches) The color in the photo may vary depending on the monitor's settings and light reflection. High price? Write a proposal to your price. If you want to buy multiple lists, please contact to discuss the shipping cost as sending multiple lists in one package will be cheaper. Delivery time: USA: 25-40 days Europe: 14-30 days Canada, Australia: 30-60 days Free shipping from Ukraine. To our great regret, due to changes in customs regulations, orders are not sent to Germany. All local taxes associated with the delivery of the order are paid by the buyer. To all customers I happily accept PayPal. If You want to pay for Visa, Master Card, AMEX, Diners - click pay with PayPal and then choose the second option Pay by card. ATTENTION! Dear Customers, please be aware that some items in my shop are vintage so they all may have some signs of years. Please feel free to send me a message with any questions about items before purchasing and I will be glad to answer you. If for any reason you are unhappy with your purchase, please return your unused item within 7 days after delivery (accordingly to the tracking). After receiving it I will be exchange or refund you payment minus shipping cost and Western Bid&Paypal fees. If you'd like to cancel your order because of my mistake I will refund 100% of your payment as long as the order isn't shipped yet. Shop: https://www.etsy.com/shop/Mity... Thank you for visiting my store. If anyone wants to open a store on ETSY and get 40 free listings (lots), follow the link, open a store, trade with pleasure: https://etsy.me/3CpU4Zr If you liked the store, let's have a coffee)))) https://www.buymeacoffee.com/p...