Polyurethane stamp for concrete "Cut Stone №1", for the floor and tracks - 2pcs Sizes of  : 580 * 580 * 15 mm or 22.8 * 22.8 * 0.6 in Polyurethane stamp for concrete "Fan", for tracks, floor - 2PCS Sizes of  : 680 * 440 * 10 mm or 26.7 * 17.3 * 0.4 in Polyurethane stamp for concrete "Curbstone", for the floor and tracks - 2 PCS Sizes of  : 790 * 270  * 17  mm or 31.1  *  10.6  * 0.7   in Polyurethane stamp for concrete "Pavement", for the floor and tracks - 2PCS Sizes of  : 600 * 370 * 10 mm or 23.6 * 14.5 * 0.4 in Stone Decorative Polyurethane stamp for concrete "base stone" - 2 pcs Sizes : Length 570.0 (mm) Width 240.0 (mm) or 22.4in*9.4in

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Before buying, specify which model you need Favorite Skyline TZ NEW SKYTZ-762MH 2.29m 10-35g Ex.Fast Favorite Skyline TZ NEW SKYTZ-832L 2.51m 3-14g Ex.Fast Favorite Skyline TZ NEW SKYTZ-842MH 2.54m 10-35g Ex.Fast Favorite Skyline TZ NEW SKYTZ-862M 2.58m 8-24g Ex.Fast Favorite Skyline TZ NEW SKYTZ-862ML 2.58m 5-18g Ex.Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite Skyline TZ NEW - an updated line of top jig rods, which has greatly expanded and acquired powerful models for heavy lures. Now there are both coastal and boat spinning for a variety of fishing conditions and for any angler needs. For the production used high modulus carbon Toray 46T, with high strength, low weight and high sensitivity. Butt end is reinforced with additional winding OCG (Octa Core Grid) - an octagonal high-modulus carbon fiber net, which significantly increases its endurance and power with little or no weight gain. Spinning Favorite Skyline TZ NEW is an elite class model equipped with high-tech Fuji TORZITE flow rings that, due to their minimal weight, do not load the blank, allowing it to open in all directions. The spaced handle is made of high-quality cork with carbon inserts, which gives the rod an elegant appearance. Favorite Skyline TZ NEW - an extended line of high-quality spinning for real lovers of jig fishing, ready at any moment to fight a trophy fish and get out of it as a winner. Especially for those anglers who do not tolerate compromises and appreciate the importance of even small parts. Manufacturer: Favorite Model: Skyline TZ NEW Rod Type: Spinning Length, m: 2.51 Test, g: 3-14 Number of sections: 2 Story: Ex-Fast Handle (material): Cork Rings (material): Fuji TORZITE Spinning class: Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Condition:   brand-new, unused, unopened, undamaged item in its original packaging. READY FOR THE END!    Description Forte MKB-25 Lux If you are a farmer or just the owner of a small summer cottage, the Forte MKB-25 Lux cultivator will become your indispensable assistant in the reliable preparation of the soil for sowing. Cultivation and high-quality cultivation occurs thanks to the built-in proprietary soil cutters. Forte MKB-25 Lux saves fuel and is virtually silent in operation. In this model, unlike the ICD-25, there is an improved air purifier. Appointment The main purpose of the model is the processing of row spacing, in other words, mechanized weeding. This is a cultivator in everyday life, consumers are often called propolnik. Features of the Forte MKB-25 Lux model: Two stroke engine The Forte MKB-25 Lux cultivator is equipped with a powerful two-stroke single-cylinder engine. Volume - 51.7 cm3. Power - 2.5 horsepower. An advanced cooling system prevents the engine from overheating and significantly increases the duration of the work. The engine uses a mixture of oil and gasoline. Comfortable grip For the most convenient control, Forte developers installed all the controls on the handles. Even an inexperienced person can control the unit. Forte MKB-25 Lux cultivator arms are collapsible. Due to this, the cultivator can be easily transported in the trunk. Robust housing Wear-resistant materials and high-quality plastic, significantly extend the life of this unit. Forte MKB-25 Lux is reliably protected from direct sunshine and excessive humidity. The frame is made of stainless steel. Despite its compactness, this unit withstands collisions with heavy objects. Passable wheels Convenient wheels are built into the Forte MKB-25 Lux cultivator for easy transport. If necessary, the wheels can be easily lifted. Thanks to the high-quality design and reliable mounting of these wheels, maneuverability will be at the highest level. Characteristics Manufacturer - Forte Country of Origin - China Weight - 15 kg Number of gears - 1 forward Condition - New Warranty period - 12 months Type - Petrol Engine Type - 2-stroke Power -2.5 l. with. Maximum processing width -30 cm Maximum processing depth -15 cm Cultivator - yes The volume of the fuel tank is 3.6 l FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite Rapid RAPTZ-632SUL-T 1.92m 1-5g Fast Favorite  Rapid RAPTZ-692ML-T 2.05m 3-14g Ex.Fast Favorite  Rapid RAPTZ-662UL-T 1.98m 2-7g Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Favorite Rapid Spinning is an incredibly light, fast and very sensitive fishing rod for predator fishing with small baits. A hard and short form will allow you to perfectly control the wiring of ultralight lures of a wide range - from jig to wobblers. The spinning is made of carbon from the Japanese company Toray modular 46TON. The butt part is reinforced with the OCG 8-directional carbon braid, which significantly increases its elasticity. The joints are reinforced with a carbon fiber winding, due to which the form is less loaded in these places, working out qualitatively during fishing. The Rapid is equipped with the most advanced Fuji Torzite throughput rings in titanium frames, which evenly distribute the load and allow you to achieve the maximum casting distance of miniature lures. The handle design takes into account the needs of both those who like to put their finger on the form and those who like a tighter grip. A skeletal reel seat with EVA elements is installed on the rod to reduce weight. Favorite Rapid Spinning is an upscale tool for the most demanding anglers who need outstanding gear sensitivity to succeed. Included with the rod is a cover and a hard plastic tube to protect the high modulus blank during transport. Features Model Number: RAPTZ-632SUL-T Warranty: 12 months Manufacturer: Favorite Model: Rapid TZ Fishing Rod Type: Spinning Rod Length, m: 1.92 Test, r: 1-5 Test, lb: PE # 0.1-0.3 Number of sections: 2 Lad: Fast Sleeve (Material): EVA Rings (Material): Fuji TORZITE Fishing Rod Class: Ultra-Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Electric screw juicer press for grape/tomatos/fruit/vegetable+meatgrinder TShM-2 Condition:   brand-new, unused, unopened, undamaged item in its original packaging. READY FOR THE PAYMENT!  PLEASE NOTE!  If you live in Europe, the price will be less than $ 30. Contact me before buying if you are from Europe. Supply voltage is  220V US and UK customers need an adapter!   US customers will need converter from 110V AC to 220V  Today's information will interest those buyers who plan to purchase a tomato press. This is a necessary and necessary thing in your household. It is especially needed for those who are engaged in the cultivation of vegetables, fruits, berries. You know very well that summer and autumn are the season when preparations are made for the winter. From everything that you have grown in your gardens and in the beds, you can prepare tasty and healthy juices and roll them in jars. They will be saturated with vitamins and much healthier from juices purchased in the distribution network. And most importantly, this product will be natural, without any "Yeshek", flavor enhancers and absolutely safe. This is new for our customers. As you can see from the marking, in addition to the device for juices, you will also get a meat grinder, that is, a universal household appliance will appear on the farm. Having such a reliable kitchen assistant, you can easily prepare juice with pulp from tomatoes, cherries, apricots, currants, raspberries, strawberries, grapes and other berries and fruits. It is important to remember that it is necessary to remove seeds from the stone fruits, and cut vegetables and fruits into small pieces. Let's move on to consider the features and advantages of the proposed kitchen appliance. This is a high performance device. For an hour of its work, it is able to process up to 120 kg of tomatoes or 70 kg of grapes into juice. The press works from a household network 220V. It features economical power consumption. Power consumption is 450W.  The most important feature of this product is the fact that it serves as a meat grinder. You have the opportunity to quickly and efficiently prepare minced meat, meat, fish, as well as vegetable. If the tomato press is mainly used in summer and autumn, then you need an electric meat grinder all year round. For grinding products there is an additional auger, mesh and knife. Note that the proposed model is equipped with a modernized screw, which increases the functionality of the press and increases the speed of the device. Please note that the tomato press TShM-2M + meat grinder is made according to the latest design, it is easy to assemble, convenient to operate and does not require special knowledge and skills when assembling and working with it. Due to the weight of the engine, the device is firmly installed on a flat surface, additional mounts for installation are not needed. The advantage of screw presses is the possibility of a continuous operation, more than 1 hour. But it is not designed to work in idle mode. An important point for the consumer: in the process, you do not have to periodically clean the device. This is a significant saving of your time. The TShM-2M tomato press + meat grinder is manufactured at the Poltava plant of Electromotor OJSC, which, in turn, guarantees reliability and high quality of the product. Characteristics Country of origin - Ukraine Appointment - Professional Type - screw View - Electric Equipment - integrated juice container, pulp regulator Automatic pulp removal - yes Overload Protection - Yes Condition - New Power Consumption - 450 W Packing size Weight - 13 kg Height - 38.5 cm Width - 18.5 cm Length - 54 cm FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Condition:   brand-new, unused, unopened, undamaged item in its original packaging. READY FOR THE END!    Description Forte MKB-25 Lux If you are a farmer or just the owner of a small summer cottage, the Forte MKB-25 Lux cultivator will become your indispensable assistant in the reliable preparation of the soil for sowing. Cultivation and high-quality cultivation occurs thanks to the built-in proprietary soil cutters. Forte MKB-25 Lux saves fuel and is virtually silent in operation. In this model, unlike the ICD-25, there is an improved air purifier. Appointment The main purpose of the model is the processing of row spacing, in other words, mechanized weeding. This is a cultivator in everyday life, consumers are often called propolnik. Features of the Forte MKB-25 Lux model: Two stroke engine The Forte MKB-25 Lux cultivator is equipped with a powerful two-stroke single-cylinder engine. Volume - 51.7 cm3. Power - 2.5 horsepower. An advanced cooling system prevents the engine from overheating and significantly increases the duration of the work. The engine uses a mixture of oil and gasoline. Comfortable grip For the most convenient control, Forte developers installed all the controls on the handles. Even an inexperienced person can control the unit. Forte MKB-25 Lux cultivator arms are collapsible. Due to this, the cultivator can be easily transported in the trunk. Robust housing Wear-resistant materials and high-quality plastic, significantly extend the life of this unit. Forte MKB-25 Lux is reliably protected from direct sunshine and excessive humidity. The frame is made of stainless steel. Despite its compactness, this unit withstands collisions with heavy objects. Passable wheels Convenient wheels are built into the Forte MKB-25 Lux cultivator for easy transport. If necessary, the wheels can be easily lifted. Thanks to the high-quality design and reliable mounting of these wheels, maneuverability will be at the highest level. Characteristics Manufacturer - Forte Country of Origin - China Weight - 15 kg Number of gears - 1 forward Condition - New Warranty period - 12 months Type - Petrol Engine Type - 2-stroke Power -2.5 l. with. Maximum processing width -30 cm Maximum processing depth -15 cm Cultivator - yes The volume of the fuel tank is 3.6 l FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Electric screw juicer press for grape/tomatos/fruit/vegetable+meatgrinder TShM-2 Condition:   brand-new, unused, unopened, undamaged item in its original packaging. READY FOR THE PAYMENT!  PLEASE NOTE!  If you live in Europe, the price will be less than $ 30. Contact me before buying if you are from Europe. Supply voltage is  220V US and UK customers need an adapter!   US customers will need converter from 110V AC to 220V  Today's information will interest those buyers who plan to purchase a tomato press. This is a necessary and necessary thing in your household. It is especially needed for those who are engaged in the cultivation of vegetables, fruits, berries. You know very well that summer and autumn are the season when preparations are made for the winter. From everything that you have grown in your gardens and in the beds, you can prepare tasty and healthy juices and roll them in jars. They will be saturated with vitamins and much healthier from juices purchased in the distribution network. And most importantly, this product will be natural, without any "Yeshek", flavor enhancers and absolutely safe. This is new for our customers. As you can see from the marking, in addition to the device for juices, you will also get a meat grinder, that is, a universal household appliance will appear on the farm. Having such a reliable kitchen assistant, you can easily prepare juice with pulp from tomatoes, cherries, apricots, currants, raspberries, strawberries, grapes and other berries and fruits. It is important to remember that it is necessary to remove seeds from the stone fruits, and cut vegetables and fruits into small pieces. Let's move on to consider the features and advantages of the proposed kitchen appliance. This is a high performance device. For an hour of its work, it is able to process up to 120 kg of tomatoes or 70 kg of grapes into juice. The press works from a household network 220V. It features economical power consumption. Power consumption is 450W.  The most important feature of this product is the fact that it serves as a meat grinder. You have the opportunity to quickly and efficiently prepare minced meat, meat, fish, as well as vegetable. If the tomato press is mainly used in summer and autumn, then you need an electric meat grinder all year round. For grinding products there is an additional auger, mesh and knife. Note that the proposed model is equipped with a modernized screw, which increases the functionality of the press and increases the speed of the device. Please note that the tomato press TShM-2M + meat grinder is made according to the latest design, it is easy to assemble, convenient to operate and does not require special knowledge and skills when assembling and working with it. Due to the weight of the engine, the device is firmly installed on a flat surface, additional mounts for installation are not needed. The advantage of screw presses is the possibility of a continuous operation, more than 1 hour. But it is not designed to work in idle mode. An important point for the consumer: in the process, you do not have to periodically clean the device. This is a significant saving of your time. The TShM-2M tomato press + meat grinder is manufactured at the Poltava plant of Electromotor OJSC, which, in turn, guarantees reliability and high quality of the product. Characteristics Country of origin - Ukraine Appointment - Professional Type - screw View - Electric Equipment - integrated juice container, pulp regulator Automatic pulp removal - yes Overload Protection - Yes Condition - New Power Consumption - 450 W Packing size Weight - 13 kg Height - 38.5 cm Width - 18.5 cm Length - 54 cm FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite SW Slow Claw SLC-661UL 2.02m Jig 10-45g PE #0.6-1.5 Power Class 0  Saltwater spinning rod  Favorite SW Slow Claw SLC-661ML 2.02m Jig 30-100g PE #1.0-3.0 Power Class 1  Saltwater spinning rod  Favorite SW Slow Claw SLC-661M 2.02m Jig 60-200g PE #2.0-4.0 Power Class 2  Saltwater spinning rod  Favorite SW Slow Claw SLC-661MH 2.02m Jig 90-300g PE #3.0-6.0 Power Class 3  Saltwater spinning rod  DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite SW Slow Claw is a specialized marine model for boat jogging slope using a multiplier coil that provides vertical bait posting without throwing. Based on the fishing conditions, the fishing rod has a medium fret for soft play of the pilker and amortization of the jerks of the fish during hatching. The form has an integral disassembled design that allows it to bend smoothly and evenly during loading, eliminating the possibility of breakage. Spinning is made of carbon fiber using MLS (Multi Layer Structure) technology and reinforced with the extra graphite Octa Core Grid winding, which increases its strength. The Fuji ergonomic reel holder is coupled with an extended EVA insert handle that allows for a secure stop during trophy withdrawal. High-quality Fuji Alconite throughput rings have a reinforced construction and are located revolvingly, that is, starting from the handle, the first one looks up and gradually, closer to the top, the other unfolds down the form. This allows to avoid twisting of the form and prevent the friction of the cord when it is subjected to high loads and deflection of the spinning rod. When choosing a spinning Favorite SW Slow Claw, it should be borne in mind that the specified test range corresponds to the bait during the vertical posting, but not during casting. That is, these are the scales that the rod can comfortably tear from the bottom without critical bending of the form. Manufacturer: Favorite SW Model: Slow Claw Type of fishing rod: Casting, Marine Length, m: 2.02 Test, r: Jig 10-45; Tairaba 30-150 Test, lb: PE # 0.6-1.5 Mass, g: 122 Number of sections: 1 Transport length, cm: 2.02 Lad: Moderate Additional Information: Power Class 0 Sleeve (Material): EVA + Carbon Rings (Material): Fuji K-Guides Alconite Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

In the presence there are such models. Before buying, specify which model you want to buy Favorite Rapid RAPTZ-632SUL-T 1.92m 1-5g Fast Favorite Rapid RAPTZ-692ML-T 2.05m 3-14g Ex.Fast Favorite Rapid RAPTZ-662UL-T 1.98m 2-7g Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Favorite Rapid Spinning is an incredibly light, fast and very sensitive fishing rod for predator fishing with small baits. A hard and short form will allow you to perfectly control the wiring of ultralight lures of a wide range - from jig to wobblers. The spinning is made of carbon from the Japanese company Toray modular 46TON. The butt part is reinforced with the OCG 8-directional carbon braid, which significantly increases its elasticity. The joints are reinforced with a carbon fiber winding, due to which the form is less loaded in these places, working out qualitatively during fishing. The Rapid is equipped with the most advanced Fuji Torzite throughput rings in titanium frames, which evenly distribute the load and allow you to achieve the maximum casting distance of miniature lures. The handle design takes into account the needs of both those who like to put their finger on the form and those who like a tighter grip. A skeletal reel seat with EVA elements is installed on the rod to reduce weight. Favorite Rapid Spinning is an upscale tool for the most demanding anglers who need outstanding gear sensitivity to succeed. Included with the rod is a cover and a hard plastic tube to protect the high modulus blank during transport. Features Model Number: RAPTZ-632SUL-T Warranty: 12 months Manufacturer: Favorite Model: Rapid TZ Fishing Rod Type: Spinning Rod Length, m: 1.92 Test, r: 1-5 Test, lb: PE # 0.1-0.3 Number of sections: 2 Lad: Fast Sleeve (Material): EVA Rings (Material): Fuji TORZITE Fishing Rod Class: Ultra-Light Payment: We are accepting PAYPAL We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns: 14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

In the presence there are such models. Before buying, specify which model you want to buy Favorite Rapid RAPTZ-632SUL-T 1.92m 1-5g Fast Favorite Rapid RAPTZ-692ML-T 2.05m 3-14g Ex.Fast Favorite Rapid RAPTZ-662UL-T 1.98m 2-7g Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Favorite Rapid Spinning is an incredibly light, fast and very sensitive fishing rod for predator fishing with small baits. A hard and short form will allow you to perfectly control the wiring of ultralight lures of a wide range - from jig to wobblers. The spinning is made of carbon from the Japanese company Toray modular 46TON. The butt part is reinforced with the OCG 8-directional carbon braid, which significantly increases its elasticity. The joints are reinforced with a carbon fiber winding, due to which the form is less loaded in these places, working out qualitatively during fishing. The Rapid is equipped with the most advanced Fuji Torzite throughput rings in titanium frames, which evenly distribute the load and allow you to achieve the maximum casting distance of miniature lures. The handle design takes into account the needs of both those who like to put their finger on the form and those who like a tighter grip. A skeletal reel seat with EVA elements is installed on the rod to reduce weight. Favorite Rapid Spinning is an upscale tool for the most demanding anglers who need outstanding gear sensitivity to succeed. Included with the rod is a cover and a hard plastic tube to protect the high modulus blank during transport. Features Model Number: RAPTZ-632SUL-T Warranty: 12 months Manufacturer: Favorite Model: Rapid TZ Fishing Rod Type: Spinning Rod Length, m: 1.92 Test, r: 1-5 Test, lb: PE # 0.1-0.3 Number of sections: 2 Lad: Fast Sleeve (Material): EVA Rings (Material): Fuji TORZITE Fishing Rod Class: Ultra-Light Payment: We are accepting PAYPAL We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns: 14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Favorite Synapse BFS SYSBF-662L 1.98m 3-10g Mod.Fast BFS - bait finesse system, very popular in Japan recently, the direction of casting. It implies the use of multiplayer gear in light and ultra-lute fishing. However, most Japanese brands BFS rods designed for catching bass and classical European moschnovaty fish. We have developed a casting rod for laytovoy ultralaytovoy and fishing, which are ideal for catching perch, pike, perch, chub, trout fishing our standard techniques. Younger rod in the line, is probably one of the most laytovyh of casting rods series to date and the corresponding coil allows you to catch the classic mikrodzhig working with weights from 1g. Rods Synapse BFS limited are equipped with the most technologically advanced rings at the moment - Fuji Torzite. Manufacturer: Favorite Model: Synapse BFS Rod type: Casting Length, m: 1.98 Test, g: 3-10 Test, lb: 4-8 Weight, g: 91 Number of sections: 2 Shipping length, cm: 102 Handle (Material): EVA Story: Fast Country of origin: East Asia Spinning class: Light Rings (material): Fuji TORZITE ______________________________________________________________________________________________________________________________ Favorite Receptor RCS-772MH 2.32m 8-30g Fast A series of rods for light and medium jig. Rods of this series are characterized by high sensitivity and complex structure. In the design of the form Receptor'a managed to achieve the maximum balance of a fairly "living" tip of the rod, moderately flexible middle part and a powerful lump. Due to this, the rod completely meets all the requirements for the jig rod. The informative tip allows you to clearly track the touch of the bottom, as well as perform the widest range of animations of jig bait. Due to sufficient flexibility of the middle part, the rod has excellent throw qualities and knits well the fish. A powerful crust allows you to cope with large prey in cramped conditions. The tip of the rod is painted gray for more information. Such a solution is often found on spinning for micro-burning with a glued monolithic tip, unlike in the Receptor series, the tip is hollow, not pasted. High-quality Fuji KL-H rings with special anti-small frames of small diameter unload the form and assume the use of modern braided cords (PE). The universal length allows you to use the Receptor both when fishing from the boat and from the shore. Manufacturer: Favorite Model: Receptor Rod type: Spinning Length, m: 2.32 Test, g: 8-30 Test, lb: 10-14 Weight, g: 111 Story: Fast Number of sections: 2 Spinning class: Medium-Heavy Shipping length, cm: 118 Handle (Material): EVA Country of origin: East Asia Rings (material): Fuji KR-series

Spinning Favorite Skyline TZ NEW SKYTZ-762ML 2.29m 5-18g Ex.Fast Spinning Favorite Skyline TZ NEW is an updated line of top jig rods, which has expanded significantly and acquired powerful models for heavy baits. Now in the series there are both coastal and boat spinning rods for various fishing conditions and for any fishing needs. For the production of high-modulus carbon Toray 46T is used, which has high strength, low weight and increased sensitivity. The butt part is reinforced with an additional winding OCG (Octa Core Grid) - an octagonal high-modular carbon mesh, which significantly increases its endurance and power with virtually no increase in mass. Favorite Skyline TZ NEW Spinning is an elite class model equipped with high-tech Fuji TORZITE access rings, which due to their minimal weight do not load the blank, allowing it to open in all directions. The spaced handle is made of high quality cork with carbon inserts, which gives the rod a graceful appearance. Favorite Skyline TZ NEW - an expanded line of high-quality spinning rods for true jig fishing enthusiasts who are ready at any time to join the battle with trophy fish and get out of it as a winner. Especially for those anglers who do not compromise and appreciate the importance of even small details. Manufacturer: Favorite Model: Skyline TZ NEW Rod Type: Spinning Length, m: 2.29 Test, g: 5-18 Test, lb: PE # 0.4-0.8 Weight, g: 119 Number of sections: 2 Shipping length, cm: 118 Story: Ex-Fast Handle (Material): Cork Rings (material): Fuji TORZITE Rod Class: Medium-Light

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite SW Shooter SSH-802ML 2.44m 5-21g PE #0.6-1.0 Fast Favorite SW Shooter SSH-862M 2.62m 7-28g PE #0.8-1.5 Fast   Favorite SW Shooter SSH-902MH 2.74m 10-35g PE #1.0-2.0 Fast Favorite SW Shooter SSH-962H 2.92m 15-50g PE #1.5-2.5 Fast Favorite SW Shooter SSH-982EXH 2.98m 20-70g PE #2.0-3.0 Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite SW Shooter - a high-quality rod for sea coast fishing with various types of lures. The form has a balanced combination of stiffness, range and sensitivity, which allows you to throw a lure far away, carry out a wobbler, feel the jig bait touch the bottom and, of course, cope with catching large trophy fish. For the production we used high-modulus carbon fiber, made according to the MLS technology (Multi Layer Structure) with an additional FX Grid winding, which increases the spinning resistance to extreme loads. Fuji Alconite K-Guide pass-through rings are installed on the form, which contribute to the free departure of the cord during casting. The convenient EVA handle, which blends perfectly with the robust Fuji reel seat, gives a modern and attractive spinning feel. Spinning Favorite Saltwater Shooter is a universal and very reliable fishing rod that will allow you to find an approach to almost any fish that lives in coastal sea waters. Manufacturer: Favorite SW Model: Shooter SW Rod Type: Spinning, Marine Length, m: 2.44 Test, g: 5-21 Test, lb: PE # 0.6-1.0 Weight, g: 137 Number of sections: 2 Shipping length, cm: 127 Build: Fast Handle (material): EVA Rings (material): Fuji Alconite K-guides Country producer: Ukraine Rod Class: Medium-Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

In the presence there are such models. Before buying, specify which model you want to buy Favorite Skyline NEW SKYA-762H 2.29m 16-50g Ex.Fast Favorite Skyline NEW SKYA-762M 2.29m 8-24g Ex.Fast Favorite Skyline NEW SKYA-762MH 2.29m 10-35g Ex.Fast Favorite Skyline NEW SKYA-832L 2.51m 3-14g Ex.Fast Favorite Skyline NEW SKYA-842H 2.54m 20-60g Ex.Fast Favorite Skyline NEW SKYA-842MH 2.54m 10-35g Ex.Fast Favorite Skyline NEW SKYA-842SH 2.54m 30-100g Ex.Fast Favorite Skyline NEW SKYA-862M 2.58m 8-24g Ex.Fast Favorite Skyline NEW SKYA-862ML 2.58m 5-18g Ex.Fast Favorite Skyline NEW SKYA-902L 2.70m 3-12g Ex.Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA The concept of this rod is a coastal long-range light. It is primarily aimed at athletes and lovers of light coastal jig. The basis of the concept is to throw it over the horizon and get the fish from the “far edge”. At the same time, the rod has an increased power reserve, which allows very quickly to bring medium fish ashore and to adequately compete with large, even in difficult conditions. The use of high modulus graphites provides the highest sensitivity. Like all Pro Series rods, Skyline is equipped with the latest Fuji rings with Torzite inserts. Manufacturer: Favorite Model: Skyline Rod Type: Spinning Length, m: 2.51 Test, g: 3-14 Test, lb: # 0.3-0.6 PE Weight, g: 112 Number of sections: 2 Shipping length, cm: 129 Story: Ex-Fast Handle (Material): Cork Rings (material): Fuji TORZITE Rod Class: Light Payment: We are accepting PAYPAL We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns: 14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Solo is the “first bird” in the new line of the top Favorite Pro Series rods, so in this series we have applied all the latest technologies that are available to us at the moment. Firstly, this is our patented development - iGrip technology, thanks to which we managed to minimize weight and increase the sensitivity of the rod. In addition, the Solo, like all Proseries rods, has the latest Fuji Torzite rings, which are 20-30% lighter than SiC. Using these technologies, it was possible to achieve a weight of not much more than 60g for a six-foot model. Solo is a micro jig fishing rod designed primarily for close range fishing on the smallest lures requiring filigree animation. It is a recently popular type of hard solid - the rod is equipped with a very thin and rigid high-modular gluing, which allows you to make accented animations of the lightest lures, and provides greater sensitivity than ordinary "soft" solid ones. Equipped with an appropriate ultralight reel, Solo will provide complete Feng Shui and allow you to dissolve during the fishing process, regardless of the fishing location, whether it is a beautiful lake in a fairy forest or a concrete canal bank in a metropolis. Specifications Manufacturer Favorite The country of manufacture East Asia A type Spinning Rod material CARBON TORAY 46T Design Ex.fast Handle type One handed Casting test 0.6-5 Unfolded Length 1.83 (m) Folded Length 95 (cm) Class Ultra-light Number of sections 2 Handle material EVA Weight 62 (g)

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite SW Shooter Offshore SSHO-7015M 2.10m 15-50g PE #1.5-2.5 Mod.Fast Favorite SW Shooter Offshore SSHO-7615M 2.32m 15-50g PE #1.5-2.5 Mod.Fast Favorite SW Shooter Offshore SSHO-7615MH 2.32m 25-80g PE #2.0-3.0 Mod.Fast Favorite SW Shooter Offshore SSHO-8015H 2.40m 40-120g PE #4.0-5.0 Mod.Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite SW Shooter Offshore is a universal marine rod designed for fishing from a boat with an inertialess reel. It can be used both when fishing in casting: on wobblers of mine, poppers and pilkers, and for vertical jig with heavy baits. The blank has a one-piece construction and, only for ease of transportation, its handle is removed, thanks to which the manufacturer managed to eliminate the weaknesses that inevitably arise on two-part rods. The spinning is made of high-modulus carbon fiber using MLS (Multi Layer Structure) technology with an additional X-shaped winding along the entire length of the blank, which makes it incredibly strong and durable, ready to fight with large fish. Given the fishing conditions, the EVA rod handle has an increased length, for a convenient grip with both hands when casting a heavy bait or fishing trophy. All installed throughput rings Fuji Alconite reinforced - three-armed, which are designed for heavy loads. Spinning Favorite SW Shooter Offshore will become a reliable companion for a fisherman - a hunter for large fish, not only at sea, it can be successfully used for catching freshwater predators - large pike, pikeperch and catfish. Manufacturer: Favorite SW Model: Shooter Offshore Rod Type: Spinning, Marine Length, m: 2.10 Test, g: 15-50 Test, lb: PE # 1.5-2.5 Weight, g: 215 Number of sections: 1.5 Shipping length, cm: 158 Build: Moderate Fast Handle (material): EVA Rings (material): Fuji K-Guides Alconite Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

2PCS SET Polyurethane stamp for concrete "Deck Board", for the floor and tracks Sizes : 800 * 480 * 15 mm or 31.5 * 19  *0.4  in MADE OF HIGH-QUALITY AUSTRALIAN POLYURETHANE THEY DONT REQUIRE EXPENSIVE RELEASE GREASE UNIQUE DESIGNE EASY TO USE Stamp options Stamp from polyurethane, Convenient and reliable tool. The stamp size is 800 * 480 * 15 mm. Weight 2.5 kg. The size of one plate is 650 by 120 mm. Suitable for floors and tracks. For horizontal printing. Behind the protective layer of felt rubber, which increases the life of the stamp (service life of at least 1000 m2) We check our products at work, so we give guarantees for the long term and quality. y. Polyurethane Stamp, for vertical  decorative Concrete/plaster Texture stamp work. The use of our flexible polyurethane stamps provides high quality printing on a concrete, gypsum and cement plasters, adhesives and putty, both vertical and horizontal surfaces. Rigid/Thick mats have nylon handle inserts. These Stamps are for commercial Use and are not one of those cheap sets you will be replacing.  Item pays for it self and allows you to get more money per foot and enables you to give your customers more options for customizing there sidewalks, driveways, patios, and other concrete surfaces as well as plaster work. Our company produces high-quality polyurethane molds for the rough stone. FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Magnesium smoothing channel for leveling concrete with a rotary mechanism (blade + mechanism) (starting concrete screed) Sizes : Length 1250.0 (mm) Width 194.0 (mm) or 49in*7 .5in Magnesium smoothing channel for leveling concrete with a rotary mechanism (blade + mechanism) (starting) The channel smoothing machine will be used to correct the surface of fresh concrete mix Suitable for "starting" work - leveling the concrete mix. The composition includes: - Blade 1250 * 194 mm (magnesium alloy with aluminum) - Swivel mechanism. Articulated type does not require adjustment, the most reliable of all types of mechanisms. FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite Synapse BFS SYSBF-662L 1.98m 3-10g Mod.Fast  Favorite Synapse BFS SYSBF-662UL 1.98m 2-7g Fast Favorite Synapse BFS SYSBF-702ML 2.10m 5-14g Mod.Fast   DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA BFS - bait finesse system, very popular in Japan in recent years the direction of casting fishing. It involves the use of multiplier gear in light and ultralate fishing. However, most BFS rods from Japanese brands are designed for catching bass and for classic European fish. We have developed casting fishing rods for light and ultralight fishing, which are ideal for fishing for perch, pike, perch, perch, trout by our standard fishing techniques. The youngest fishing rod in the line is perhaps one of the most light casting fishing rods to date, and with a suitable coil allows you to fish for classic micro-jigs, working with weights of 1g. Synapse BFS limited fishing rods are equipped with the most technological rings to date - Fuji Torzite. Features Model Number: SYSBF-662UL Warranty: 12 months Manufacturer: Favorite Model: Synapse BFS Fishing Rod Type: Castings Length, m: 1.98 Test d: 2-7 Test, lb: 2-6 Mass, g: 87 Number of sections: 2 Transport length, cm: 102 Lad: Moderate Fast Sleeve (Material): EVA Rings (Material): Fuji TORZITE Fishing Rod Class: Ultra-Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Polyurethane stamp for concrete "Cut Stone №1", for the floor and tracks Sizes of  : 580 * 580 * 15 mm or 22.8 * 22.8 * 0.6 in MADE OF HIGH-QUALITY AUSTRALIAN POLYURETHANE THEY DONT REQUIRE EXPENSIVE RELEASE GREASE UNIQUE DESIGNE EASY TO USE Stamp options Stamp from polyurethane, Convenient and reliable tool. The stamp size is 580 * 580 * 15 mm. Suitable for floors and tracks. For horizontal printing. Behind the protective layer of felt rubber, which increases the life of the stamp (up to 3000 m2) We check our products at work, so we give guarantees for the long term and quality. Polyurethane Stamp, for vertical  decorative Concrete/plaster Texture stamp work. The use of our flexible polyurethane stamps provides high quality printing on a concrete, gypsum and cement plasters, adhesives and putty, both vertical and horizontal surfaces. Rigid/Thick mats have nylon handle inserts. These Stamps are for commercial Use and are not one of those cheap sets you will be replacing.  Item pays for it self and allows you to get more money per foot and enables you to give your customers more options for customizing there sidewalks, driveways, patios, and other concrete surfaces as well as plaster work. Our company produces high-quality polyurethane molds for the rough stone. FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Stone Decorative Polyurethane stamp for decorative stone "Cut" Sizes : Length 480.0 (mm) Width 100.0 (mm) or 18.9in*4in MADE OF HIGH-QUALITY AUSTRALIAN POLYURETHANE THEY DONT REQUIRE EXPENSIVE RELEASE GREASE UNIQUE DESIGNE EASY TO USE Stamp options Stamp size 48 cm * 10 cm. The stamp is made of polyurethane OSV Technologiya company (Formolast 9U). Formoplast 9U is used in the manufacture of bushings for cars (suspensions, jet rods, etc.), which indicates the strength of this material. Shore Density 70 *. The stamp on top is protected by felt rubber, which makes it stronger. Suitable for horizontal and vertical printing. We check our products at work, so we give guarantees for a long time and quality. Polyurethane Stamp, for vertical  decorative Concrete/plaster Texture stamp work. The use of our flexible polyurethane stamps provides high quality printing on a concrete, gypsum and cement plasters, adhesives and putty, both vertical and horizontal surfaces. Rigid/Thick mats have nylon handle inserts. These Stamps are for commercial Use and are not one of those cheap sets you will be replacing.  Item pays for it self and allows you to get more money per foot and enables you to give your customers more options for customizing there sidewalks, driveways, patios, and other concrete surfaces as well as plaster work. Our company produces high-quality polyurethane molds for the rough stone. FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Spinning Favorite SW Shooter - a high-quality rod for sea coast fishing with various types of lures. The form has a balanced combination of stiffness, range and sensitivity, which allows you to throw a lure far away, carry out a wobbler, feel the jig bait touch the bottom and, of course, cope with catching large trophy fish. For the production we used high-modulus carbon fiber, made according to the MLS technology (Multi Layer Structure) with an additional FX Grid winding, which increases the spinning resistance to extreme loads. Fuji Alconite K-Guide pass-through rings are installed on the form, which contribute to the free departure of the cord during casting. The convenient EVA handle, which blends perfectly with the robust Fuji reel seat, gives a modern and attractive spinning feel. Spinning Favorite Saltwater Shooter is a universal and very reliable fishing rod that will allow you to find an approach to almost any fish that lives in coastal sea waters. Manufacturer: Favorite SW Model: Shooter SW Rod Type: Spinning, Marine Length, m: 2.62 Test, g: 7-28 Test, lb: PE #0.8-1.5 Weight, g: 137 Number of sections: 2 Shipping length, cm: 127 Build: Fast Handle (material): EVA Rings (material): Fuji Alconite K-guides Country producer: Ukraine Rod Class: Medium-Light Payment: We are accepting PAYPAL We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days .

Condition:   brand-new, unused, unopened, undamaged item in its original packaging. READY FOR THE END!  PLEASE NOTE! ! Supply voltage is  220V US and UK customers need an adapter!   US customers will need converter from 110V AC to 220V  Snow blower Forte ST-1600 is a household machine for cleaning snow from various territories. The device can be used near a private house, in a summer residence or near any other building, it should be noted that the device is electric, it is powered by a single-phase AC network with a voltage of 220 volts. In one pass, the snow blower captures a 40 cm wide section, while the maximum thickness of the removed snow cover is 18 cm. The direction of the snow ejection is manually adjusted by the user, for this the ejection chute rotates 180 degrees, the maximum ejection range is 4 meters. The snow blower is equipped with an electric motor with a power of 1600 W, it provides the device with a fairly high performance: The device is ideally adapted to the climatic conditions of Ukraine, can work even in severe frosts: Main functional features of the Forte ST-1600 snow blower: Rubberized auger. The snow blower is equipped with a metal screw; a rubber edge is located on its edges. The auger ideally cleans the surface from the very edge of snow, and the rubberized edges do not damage the decorative coating, for example, it can be marble, tile or other surfaces. Simple control system. The device control unit is located on the working handle of the snow blower; in addition, a handle is placed on it for changing the direction of the snow release. If necessary, the handle is folded, thereby facilitating the transportation and storage of the device. Snow discharge direction. Snow is ejected through a plastic chute on the snow blower body, it has a rotary structure, rotates around its axis by 180 degrees, thereby changing the direction of the ejection. The snow emission range in this model is 4 meters. High passability of the device. The snow blower is equipped with small transport wheels with winter treads, the wheels themselves are made of plastic, provide the device with a good cross through a variety of surfaces. Low noise. The device does not create very big noise during operation, its maximum level is 101 dB, thereby you will not interfere with neighbors or any other people around during snow removal. The model delivery set includes: Forte ST-1600 snow blower, swivel chute, operation manual, warranty card, cardboard packaging. Characteristics Manufacturer-Forte Country of Origin-China Appointment-household Single-stage snow removal method Engine type - electric Type of movement non-self-propelled Type of start-electric starter Drive Wheel Type Single-stage snow assembly design Number of gears-1 forward Manual discharge direction adjustment Electric starter yes Working width is 40cm Working height-18 cm Power-1, 6 kW 4 m ejection range Screw Type Rubberized Plastic Packing size Weight 11.5 kg Height-58 cm Width is 26 cm Length is 58 cm FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

2PCS SET Polyurethane stamp for concrete "Deck Board", for the floor and tracks Sizes : 800 * 480 * 15 mm or 31.5 * 19  *0.4  in MADE OF HIGH-QUALITY AUSTRALIAN POLYURETHANE THEY DONT REQUIRE EXPENSIVE RELEASE GREASE UNIQUE DESIGNE EASY TO USE Stamp options Stamp from polyurethane, Convenient and reliable tool. The stamp size is 800 * 480 * 15 mm. Weight 2.5 kg. The size of one plate is 650 by 120 mm. Suitable for floors and tracks. For horizontal printing. Behind the protective layer of felt rubber, which increases the life of the stamp (service life of at least 1000 m2) We check our products at work, so we give guarantees for the long term and quality. y. Polyurethane Stamp, for vertical  decorative Concrete/plaster Texture stamp work. The use of our flexible polyurethane stamps provides high quality printing on a concrete, gypsum and cement plasters, adhesives and putty, both vertical and horizontal surfaces. Rigid/Thick mats have nylon handle inserts. These Stamps are for commercial Use and are not one of those cheap sets you will be replacing.  Item pays for it self and allows you to get more money per foot and enables you to give your customers more options for customizing there sidewalks, driveways, patios, and other concrete surfaces as well as plaster work. Our company produces high-quality polyurethane molds for the rough stone. FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.