In the presence there are such models. Before buying, specify which model you want to buy Favorite Blue Bird NEW BB-632L-S 1.92m 3-12g SPINNING ROD Favorite Blue Bird NEW BB-682UL-S 2.04m 1-7g SPINNING ROD DESIGNED & ENGINEERED IN UKRAINE Spinning Favorite Blue Bird 2016 was created in order to always keep pace with the times and remain one of the most popular micro-jet fishing rods in Ukraine. The rod has received a new modern design. The form of the material Carbon 30T with a braid of SkyFlex is a combination of lightness and elasticity, a pledge of comfort on fishing and confidence in its gear. A new ergonomic spaced handle with a streamlined reel seat that fits comfortably in your hand. Passing rings, made according to the modern concept, allow to achieve long casting, except for possible overlapping of the cord. Also, for the convenience of moving along the reservoir, a modern "keeper kick" was added, on which it is possible to fasten the bait and it will not interfere with movement. A special rod system with a thin sensitive tip allows you to control everything that happens at the other end of the line. Manufacturer: Favorite Model: Blue Bird Rod type: Spinning Weight, g: 90 Length, m: 1.92 Test, g: 1-7 Number of sections: 2 Transport length, cm: 100 Story: Ex-Fast Handle (Material): EVA Test, lb: 4-6 Rings (material): Korea Sic

Pay attention! The production time of the clock is about 10 business days. Because it is a manual work. Thanks for understanding . After the purchase, write to me what color of the lamps you want, available colors Yellow, blue, red, green, white Great gift and creative thing for yourself loved one!) Warm desk clock, manual assembly. Be sure to decorate any interior. Be sure to attract the attention of any of your guests and will delight the host for a long time! The clock has a thermometer, an alarm clock, a colored backlight, it can be turned off. Modes of operation: - display only time (hours / minutes / seconds) - time and date periodically - time and temperature - time, temperature and date Power supply: EU - 100-250V from 7-18 V 500 mA Instructions for setting the clock There are three buttons at the back and the menu button is responsible for switching modes from 1 to 4; the first mode shows only time, 2 mode shows time and date, the third mode shows time and temperature, 4 mode shows time, date and temperature. It is the 4th mode that goes through all the numbers most often, namely every 2 minutes, which helps to save all the cathodes without poisoning. With a long press on the menu button, we enter the clock and date setting mode. In-4 in1 and in-14 hours have an alarm clock when you press the button down, we turn the alarm off, the seconds hands show zero or one where zero is off and the unit is on alarm. Setting the alarm is done with the button up if you hold it down. Everywhere, everything switches the menu button.

Polyurethane stamp for concrete "Pavement", for the floor and tracks Sizes of : 600 * 370 * 10 mm or 23.6 * 14.5 * 0.4 in MADE OF HIGH-QUALITY AUSTRALIAN POLYURETHANE THEY DONT REQUIRE EXPENSIVE RELEASE GREASE UNIQUE DESIGNE EASY TO USE Stamp options Stamp size 60 * 37 * 1.5 cm. Area 0.2 m2. Shore hardness 75. Suitable for horizontal printing. We check our products at work, so we give guarantees for a long time and quality. Polyurethane Stamp, for vertical decorative Concrete/plaster Texture stamp work. The use of our flexible polyurethane stamps provides high quality printing on a concrete, gypsum and cement plasters, adhesives and putty, both vertical and horizontal surfaces. Rigid/Thick mats have nylon handle inserts. These Stamps are for commercial Use and are not one of those cheap sets you will be replacing. Item pays for it self and allows you to get more money per foot and enables you to give your customers more options for customizing there sidewalks, driveways, patios, and other concrete surfaces as well as plaster work. Our company produces high-quality polyurethane molds for the rough stone. FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns: 14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Functional: - two control buttons - time display in HH: MM format - date display in DD format: MM manual mode / automatic mode - LED blue lights balloon lamps day / night / manual / auto mode - automatic switching HH: MM / DD: MM manual mode / automatic mode - animation function, extending lamp life automatic night mode Specifications: Type of lamps: IN-14 4 pcs height of figures: 18 mm height of lamp: 50 mm Board Specifications: Length: 100 mm Width: 30 mm Height: 22 mm Nutrition: micro USB 5v (automatically save the exact time and all settings when power is off) - battery included CR 1220 The clock has an ultra-precise clock run; the DS3231 real-time clock module is installed The debugged printed circuit board on the modern desphratore, the modern picked up base of elements, an insertion, the modern microcontroller.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Stamp polyurethane for concrete and Scale plaster, small, for a floor and walls Sizes : Length 380.0 (mm) Width 300.0 (mm) or 15in*11.8in MADE OF HIGH-QUALITY AUSTRALIAN POLYURETHANE THEY DONT REQUIRE EXPENSIVE RELEASE GREASE UNIQUE DESIGNE EASY TO USE Stamp options Stamp "Rock" of polyurethane (medium, crack) 45 cm * 35 cm. Maximum relief of 5 mm. The stamps of the Scala line are made of polyurethane with a Shore density of 70. It has a protective layer of felt rubber, which makes the product more reliable. We made molds with a large block of stone, so the stamps do not have an edge (seam). This allows the master to create their own unique forms. Stamps are used for walls and floors (for horizontal and vertical printing) We check our products at work, so we give guarantees for long-term quality. Polyurethane Stamp, for vertical  decorative Concrete/plaster Texture stamp work. The use of our flexible polyurethane stamps provides high quality printing on a concrete, gypsum and cement plasters, adhesives and putty, both vertical and horizontal surfaces. Rigid/Thick mats have nylon handle inserts. These Stamps are for commercial Use and are not one of those cheap sets you will be replacing.  Item pays for it self and allows you to get more money per foot and enables you to give your customers more options for customizing there sidewalks, driveways, patios, and other concrete surfaces as well as plaster work. Our company produces high-quality polyurethane molds for the rough stone. FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Edison vintage table lamp ( without a BUBL ) This round wooden log lamp with warm light, made from piece of a cherry/ach tree. If you are looking for unique decor item which is practical at the same time, You can not miss this wooden lamp. You will be delighted how good this natural wood lamp looks at your home and how cozy atmosphere it makes in the evenings thanks to the warm light of this lamp. Retro style 100% NATURAL wood and handcrafted. Add a modern eco-friendly touch to your home or commercial space. These meticulously crafted Edison light bulb deliver a soft warm light that is pleasant to look at. Warm up any space and turn your light fixtures into an instant conversation piece. Features & Specifications • The product is for indoor use. • Equipped with dimmer switch for easy control and brightness adjustment. • Wood type – ach/oak • Standard ceramic lamp-socket E27 Operation temperature: -10℃..+40℃ Voltage: AC 110- 240V, 50-60Hz, bulbs power up to 60W Connection type: EU-type plug with dimmer switch Cord Length: Equipped with an 170 cm/67 in Dimension • Round (diameter): 40 сm /15.5 in • Width: 5 сm/1.9 in Weight: 750g Package Contents • Desk table lamp (without bulb) • User manual Waranty: 12 months Our team makes our everyday life more eco-friendly by replacing plastic housings of everyday gadgets for eco-friendly wood ones. We use only an array of wood and eco-friendly oil (odorless, colorless or without traces on your hands) to protect wood for prolonged use. Our team designs and manufactures mostly by hands. ***Please note that each lamp is a handmade original, and may slightly vary in color, finish, and size Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Smart solid wood (ash) Table Desk Lamp with usb charger model DV2101 Touch sensor switch and Adjustable bright Wooden LED touch table lamp with USB charging for phone or other gadgets Modern simple design, yet great looking. Hidden touch sensor acts as the lighting control for the lamp and can be easily turned on/off/dim (not fixed-level of brightness) simply by touching the special symbol on the wood. Different (not fixed) levels of brightness allow for a dim/ambient night light at the low setting or could be a reading light at the highest setting. The base is handcrafted out of solid wood. Modern style 100% NATURAL wood and handcrafted. Features & Specifications • The product is for indoor use and has a non-user replaceable light source. • Equipped with sophisticated touch - sensitive switching for easy control and brightness adjustment. • Wood type – ash , cherry • Power - 7W Technology: Led Color temperature: 3000 k Operation temperature: -10℃..+40℃ Lifespan: up to 25,000 Hours under normal use Voltage: DC 12 V, 2A min (power supply Connection type: EU-type plug Energy efficiency class: A++ Cord Length: Equipped with an 150 cm/60 in textile power cable. Dimension • Height: 250 mm • Width: 120 mm • Length: 120 mm Weight: 550g Package Contents • Desk table lamp • User manual • Power Supply • US Adapter (Only USA) Waranty: 12 months Our team makes our everyday life more eco-friendly by replacing plastic housings of everyday gadgets for eco-friendly wood ones. We use only an array of wood and eco-friendly oil (odorless, colorless or without traces on your hands) to protect wood for prolonged use. Our team designs and manufactures mostly by hands. ***Please note that each lamp is a handmade original, and may slightly vary in color, finish, and size Payment: We are accepting PAYPAL We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns: 14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Polyurethane stamp for concrete "Board", for the floor and tracks Sizes : 560 * 240 mm or 22 * 9.4 in MADE OF HIGH-QUALITY AUSTRALIAN POLYURETHANE THEY DONT REQUIRE EXPENSIVE RELEASE GREASE UNIQUE DESIGNE EASY TO USE Stamp options Stamp from polyurethane. Convenient and durable tool. Stamp the size of 560 * 240 mm Suitable for work on the floor and walkways. Suitable for horizontal printing. We check our products at work, so we give guarantees for the long term and quality. GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product.   Polyurethane Stamp, for vertical  decorative Concrete/plaster Texture stamp work. The use of our flexible polyurethane stamps provides high quality printing on a concrete, gypsum and cement plasters, adhesives and putty, both vertical and horizontal surfaces. Rigid/Thick mats have nylon handle inserts. These Stamps are for commercial Use and are not one of those cheap sets you will be replacing.  Item pays for it self and allows you to get more money per foot and enables you to give your customers more options for customizing there sidewalks, driveways, patios, and other concrete surfaces as well as plaster work. Our company produces high-quality polyurethane molds for the rough stone. FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite Synapse Twitching SYST-602UL 1.82m 2-8g Moderate  Favorite Synapse Twitching SYST-662L 1.98m 3-12g Moderate Favorite Synapse Twitching SYST-702ML 2.13m 4-16g Moderate DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Synapse - a new line of rods designed specifically for lite and ultralight fishing. Synapse fishing line is designed to meet the needs of light fishing enthusiasts. This series includes fishing rods of two different concepts: Synapse - universal fishing rods with a slope in jig fishing and Synapse Twitch Special - special fishing rods for twitching. All Synapse rods feature Fuji AT lightweight titanium rollers and a spaced ergonomic handle. The thickening of the handle lies comfortably in the palm of the hand, the shortened front part makes it easy to put the index finger on the form for maximum sensory and ease of manipulation of light baits. Features Model Number: SYST602UL Warranty: 12 months Manufacturer: Favorite Model: Synapse Fishing Rod Type: Spinning Rod Length, m: 1.82 Test d: 2-8 Test, lb: 4-6 Mass, g: 83 Number of sections: 2 Transport length, cm: 1.02 Lad: Moderate Sleeve (Material): EVA Rings (Material): Fuji Titanium Fishing Rod Class: Ultra-Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite X1 902MH 2.74m 10-35g Ex.Fast Favorite X1 802H 2.44m 20-50g Ex.Fast Favorite X1 802ExH 2.44m 30-80g Ex.Fast Favorite X1 762H 2.29m 10-36g Ex.Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Functional series of fishing rods X1 for demanding fishermen, who appreciate first of all the high characteristics of the tackle and its reliability. The fast, easy and highly sensitive form of the rod is not inferior in its characteristics to the more expensive counterparts. The forms are reinforced by the use of prepregs with different fiber direction and a special carbon winding in the kale part. The fishing line is designed primarily for fishing with jigsaw and jig, which naturally does not prevent it from being used for classic turntables and rockers. Simple design elements made the rod affordable. In its simplicity, it is quite ergonomic handle and conveniently located in the hand, and modern rings are arranged in accordance with the KR-concept. Manufacturer: Favorite Model: X1 Fishing Rod Type: Spinning Rod Length, m: 2.74 Test, d: 10-35 Test, lb: 10-20 Mass, r: 191 Number of sections: 2 Transport length, cm: 144 Lad: Ex-Fast Sleeve (Material): EVA Rings (Material): Sic Fishing Rod Class: Medium-Heavy Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

MILK CREAM ELECTRIC CENTRIFUGAL SEPARATOR MACHINE POLYPROPYLENE  100L/H MODEL MOTOR SICH 100-19 Condition:   brand-new, unused, unopened, undamaged item in its original packaging. READY FOR THE PAYMENT!  PLEASE NOTE!  Supply voltage is  220V US and UK customers need an adapter!   US customers will need converter from 110V AC to 220V  The centrifugal separator Motor Sich SCM-100-19 is made entirely of plastic. It is used to make cream with whole milk. After processing, the return remains. This is completely skim milk. It is also used in the household for other products. As a result of filtering, various impurities go away. To significantly reduce the cost of packaging, all body parts are made of plastic. The drum was made of aluminum. With infrequent use and respect, it will not yield to more expensive models. In domestic use in the kitchen, it will cover your needs. Unit productivity up to 100 liters in one hour of operation. At the same time, its power consumption is only 60 watts. For a month you will not wind up a lot of electricity, so it can still be called economical. You yourself decide how much cream should turn out, and how much skim milk, depending on your needs. The adjustment range is from 1: 4 to 1:10. The temperature of the separated milk should be in the range of 35-40 degrees. At a lower temperature, the fat will thicken, and at a higher temperature, protein will curl. When finished, pass 3 liters of warm water through it. Then disassemble. Before use, be sure to read the instructions or read a brief description on our website. The installation should not work more than one hour of continuous operation. This will lead to overheating and failure of the electric motor. Leave it to cool for 30 minutes. After each processed 25 liters of raw milk, it is necessary to disassemble the unit and rinse in running water. Milk Productivity - 100 L Drum rotation frequency - 10500 rpm The number of plates in the drum - 10-12 pcs. Milk collector capacity - 12 l The temperature of the separated milk is from - 35 to 40 ° C Fat content in skim milk - 0.05% Power Consumption - 60 W The ratio of cream to skim - 1: 4 - 1:10 Bowl diameter - 365 mm Separator height - 522 mm Weight - 3.4 kg polypropylene FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

MILK CREAM ELECTRIC CENTRIFUGAL SEPARATOR MACHINE METAL 100L/H Condition:   brand-new, unused, unopened, undamaged item in its original packaging. READY FOR THE  END!  Please Note!! Supply voltage is  220V!!! US and UK customers need an adapter!   US customers will need converter from 110V AC to 220V  The continuous operation of the separator is 60 minutes, then a pause is 30 minutes. The centrifugal separator Motor Sich SCM-100-15 is made of metal and polypropylene. It is used to make cream with whole milk. After processing, the return remains. This is completely skim milk. It is also used in the household for other products. As a result of filtering, various impurities go away. The body of the device is made of plastic. The main work units are poured from food-grade aluminum. These include: a float chamber, a receiver of cream and skim milk, a milk receiver. Unit productivity up to 100 liters in one hour of operation. At the same time, its power consumption is only 60 watts. For a month you will not wind up a lot of electricity, so it can still be called economical. You yourself decide how much cream should turn out, and how much skim milk, depending on your needs. The adjustment range is from 1: 4 to 1:10. The temperature of the separated milk should be in the range of 35-40 degrees. At a lower temperature, the fat will thicken, and at a higher temperature, protein will curl. When finished, pass 3 liters of warm water through it. Then disassemble. Before use, be sure to read the instructions or read a brief description on our website. The installation should not work more than one hour of continuous operation. This will lead to overheating and failure of the electric motor. Leave it to cool for 30 minutes. After each processed 25 liters of raw milk, it is necessary to disassemble the unit and rinse in running water. Milk Productivity - 100 L Drum speed - 10,500 rpm The number of plates in the drum -  10-12 pcs Milk collector capacity - 12 l The temperature of the separated milk is from - 35 to 40 ° C Fat Content - 0.05% Power Consumption - 60 W The ratio of cream to image 1: 4 - 1:10 Bowl diameter - 365 mm Separator height - 522 mm Weight - 6 kg FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

MILK CREAM ELECTRIC CENTRIFUGAL SEPARATOR MACHINE METAL 100L/H MODEL MOTOR SICH 100-18 Condition:   brand-new, unused, unopened, undamaged item in its original packaging. READY FOR THE END!  PLEASE NOTE! ! Supply voltage is  220V US and UK customers need an adapter!   US customers will need converter from 110V AC to 220V  The centrifugal separator Motor Sich SCM-100-18 is made entirely of metal. It is used to make cream with whole milk. After processing, the return remains. This is completely skim milk. It is also used in the household for other products. As a result of filtering, various impurities go away. The body of the device is made of iron. The main work units are poured from food-grade aluminum. These include: a float chamber, a receiver of cream and skim milk, a milk receiver. Unit productivity up to 100 liters in one hour of operation. At the same time, its power consumption is only 60 watts. For a month you will not wind up a lot of electricity, so it can still be called economical. You yourself decide how much cream should turn out, and how much skim milk, depending on your needs. The adjustment range is from 1: 4 to 1:10. The temperature of the separated milk should be in the range of 35-40 degrees. At a lower temperature, the fat will thicken, and at a higher temperature, protein will curl. When finished, pass 3 liters of warm water through it. Then disassemble. Before use, be sure to read the instructions or read a brief description on our website. The installation should not work more than one hour of continuous operation. This will lead to overheating and failure of the electric motor. Leave it to cool for 30 minutes. After each processed 25 liters of raw milk, it is necessary to disassemble the unit and rinse in running water. Milk Productivity - 100 L Drum rotation frequency - 10500 rpm The number of plates in the drum - 10-12 pcs. Milk collector capacity - 12 l Fat content in skim milk - 0.05% Power Consumption - 60 W The ratio of cream to cream is 1: 4 - 1:10 Bowl diameter - 365 mm Separator height - 522 mm Weight - 6 kg Only metal FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Warning !!! Fast shipping to USA in 4-5 business days. Only the USA. Pay attention! The production time of the clock is about 10 business days. Because it is a manual work. Thanks for understanding . Pay attention!Production time is about 10 working days + delivery to you. Available colors nixie clock RGB Yellow, blue, red, green, white ,purple This is a beautiful vintage retro style nixie clock with decatron that is made by hand with love for you. This nixie clock with decatron will be a great gift for any holiday. This nixie clock will be an incredible gift for loved ones and loved ones for you. It will also be an incredible gift for your boss. And it will be a very exciting gift for children, your children will be caught up in this nixie clock IN4 with decatron. Be sure that this watch will surprise everyone. The gas hours of bit indicators in4 and the counter - decatron og4. It has a switched off yellow light, a very loud daily alarm clock. And then there is a function of anti-poisoning lamps which increases the life of the lamps Decatron shows seconds - Size 175х70х80mm Power supply: EU - 100-250V from 7-18 V 500 mA + US adapter Instructions for setting the Nixie Clock Also, according to your desire, the nixie clock may look older, more authentic, worn (after painting the clock stuck) Let me know about it.Payment:We are accepting PAYPAL  We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping:We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns: 14 days money back, buyer pays return shipping.If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. The scooter is used for subsidence of crushed stone in concrete mix. weight 3.6 kg, diameter 125 mm, width 500 mm, "handle" - 150 mm FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL  We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping.If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Polyurethane stamp for concrete "Old Berdyansk 1", for floor and paths Sizes : Length 500.0 (mm) Width 500.0 (mm) or 19.7in* 19.7in MADE OF HIGH-QUALITY AUSTRALIAN POLYURETHANE THEY DONT REQUIRE EXPENSIVE RELEASE GREASE UNIQUE DESIGNE EASY TO USE Stamp options Part of a set of two stamps (see second part https://www.ebay.com/itm/274117261775) Stamp size 50 * 50 cm. 1 cm thick. For floor and tracks. Suitable for horizontal printing. We check our products at work, so we give guarantees for a long time and quality. Polyurethane Stamp, for vertical  decorative Concrete/plaster Texture stamp work. The use of our flexible polyurethane stamps provides high quality printing on a concrete, gypsum and cement plasters, adhesives and putty, both vertical and horizontal surfaces. Rigid/Thick mats have nylon handle inserts. These Stamps are for commercial Use and are not one of those cheap sets you will be replacing.  Item pays for it self and allows you to get more money per foot and enables you to give your customers more options for customizing there sidewalks, driveways, patios, and other concrete surfaces as well as plaster work. Our company produces high-quality polyurethane molds for the rough stone. FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

MILK CREAM Manual CENTRIFUGAL SEPARATOR MACHINE METAL 80L/H MOTOR SICH 80 - 09 Condition:  brand-new, unused, unopened, undamaged item in its original packaging. READY FOR THE PAYMENT!  Manual separator-cream separator “Motor Sich SCMR-80-09” is a household appliance with a manual drive for separating whole milk into cream and skim milk while cleaning it from contamination. Milk Productivity - 80 L Drum rotation speed - 10,000 rpm The number of plates in the drum - 10-12 pcs. Milk collector capacity - 12 l The temperature of the separated milk is from - 30 to 40 ° C Fat content in skim milk - 0.05% The ratio of cream to skim - 1: 4 - 1:10 Bowl diameter - 365 mm Separator height - 520 mm Weight - 7.50 kg FREE priority airmail shipping with tracking number Payment:  We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping:  We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months.

Garden Metal Precision Seeder Vegetable 7 Row Manual Planter sowing small seeds Complete with 7 bushings, they will need to make slots for the seeds you plan to sow. The standard diameter of the slots in the bushings 3-4mm this size is suitable for seeds - carrots, onions, parsley, dill. For example, if you want to sow peas, you need to make a hole in the sleeve of a 7-9mm. The window in the seed sleeve is made with a drill. You can also buy one more set of 1-piece bushings for $ 1.99. Modular manual seeder for sowing small-seeded vegetables (carrots, + + radishes, + + parsley, + + cherries, + + cabbage, + + beets, + + peas, + + soy, + + salads, + + flower seeds, + + green manure, + + lawn grasses, + + vegetable seeds, + +), + + and other crops close to those listed by seed size and seeding rate. (cell size for seeds 3 mm, + ++ 4, + +5 mm, + + + 9 mm) (One to seven rows can be assembled from a seed seeder) 3 Seeder specifications: The seeder is a collapsible design. The number of rows sown simultaneously - 1 - 7. The row spacing is 60 mm. The seeder is 600 mm wide. Operating principle The principle of the seeder is based on the rotation of the sleeve of the sowing apparatus, + + into the calibrated recesses (3 mm, + ++ 4, + +5 mm, + + + 9 mm)) of which the seeds of the sowing culture get. The rubber limiter leaves one or more seeds in each recess of the sowing sleeve (depending on its adjustment), + + which are discharged into the furrow by an original design ejector. The sowing density depends on the pitch of the recesses in the sowing sleeve and the adjustment of the limiter. Sowing is carried out in well-prepared soil in an ordinary way with row spacing + + corresponding to the technology of sowing individual crops. After sowing, the soil is rolled up and, + + if necessary, + + mulch and water. After work, clear the drill from the ground and seed residue. Seeder device The seeder device consists of sowing units with seeder bins, + + planted on a common shaft. The seeder bushings of the seeder have a similar design and purpose, + + but are not interchangeable due to the different pitch of the recesses for the seeds. Each sowing unit is equipped with one sowing sleeve for sowing radish seeds, + + carrots, + + parsley and is fixed on the transverse draft of the seeder with the ability to adjust the row spacing. To ensure the reliability of the seeder and the accuracy of sowing, the seeder is equipped with a brush limiter and seed ejector. To establish the uniformity of sowing, careful adjustment of each sowing apparatus is necessary. Preparing the drill for work Set the required sowing rate, + + by installing the desired sowing sleeve on the shaft. Adjust the position of the brush seeding limiter to the desired number of seeds. Check and, if necessary, adjust the seeding rate by rolling the seeder with seeds on a flat surface. Sowing: Before sowing, pre-mark the bed. Sowing is carried out in well-prepared soil in an ordinary way with row spacing + + corresponding to the technology of sowing individual crops. After sowing, the soil is rolled up and, + + if necessary, + + mulch and water. After work, clear the drill from the ground and seed residue. Country of manufacture - Ukraine Opener Type - Keeled Type of the sowing device - Disk Aisle Width -60.0 (mm) Seeding Depth -40.0 (mm) The number of bins -7 pcs. Condition- New dimensions Length -650.0 (mm) Width -250.0 (mm) Height -250.0 (mm) Weight -4.5 (kg) FREE priority airmail shipping with tracking number Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Wooden pill box with honeycomb ornament will help you to keep track of your medications. A caring gift for those, who are always busy or like to keep things in order. Stay healthy! Features & specifications: •   Wood types: ash wood, dried ash wood, walnut wood, oak wood, maple wood •   Lid design: without edges, with magnets •   Cell shape: rounded corners, with slate on the front •   Cell count: 7, with weekday marks starting from Sunday •   Cell width: 2.10cm / 0.82in •   Cell height: 4cm / 1.57in •   Cell depth: 2.10cm / 0.82in Dimensions: •   Height: 2.80cm / 1.10in •   Width: 19.60cm / 7.71in •   Depth: 6.50сm / 2.56in •   Weight: 225g / 0.49lb Package contents: •   Pill Box Our team makes your life more eco-friendly by replacing plastic housings of everyday gadgets for wooden ones. We only use solid wood and oil/wax (odorless, colorless or without traces on your hands) to protect matrial for prolonged use. Also note, that each product is handmade, and may slightly vary in color, finish, and size. pill boxes pill containers pill boxes 7 day pill box 7 day 7 days wooden pill box decorative pillboxes wooden pill boxes small pill boxes travel pill boxes pill case 7 days wooden pill case pill cases Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Wooden pill box with Natural type of wood ornament will help you to keep track of your medications. A caring gift for those, who are always busy or like to keep things in order. Stay healthy! Features & specifications: • Wood types: ash wood, dried ash wood, walnut wood, oak wood, maple wood • Lid design: without edges, with magnets • Cell shape: rounded corners, with slate on the front • Cell count: 7, with weekday marks starting from Sunday • Cell width: 2.10cm / 0.82in • Cell height: 4cm / 1.57in • Cell depth: 2.10cm / 0.82in Dimensions: • Height: 2.80cm / 1.10in • Width: 19.60cm / 7.71in • Depth: 6.50сm / 2.56in • Weight: 225g / 0.49lb Package contents: • Pill Box Our team makes your life more eco-friendly by replacing plastic housings of everyday gadgets for wooden ones. We only use solid wood and oil/wax (odorless, colorless or without traces on your hands) to protect matrial for prolonged use. Also note, that each product is handmade, and may slightly vary in color, finish, and size.

Wooden pill box with honeycomb ornament will help you to keep track of your medications. A caring gift for those, who are always busy or like to keep things in order. Stay healthy! Features & specifications: • Wood types: ash wood, dried ash wood, walnut wood, oak wood, maple wood • Lid design: without edges, with magnets • Cell shape: rounded corners, with slate on the front • Cell count: 7, with weekday marks starting from Sunday • Cell width: 2.10cm / 0.82in • Cell height: 4cm / 1.57in • Cell depth: 2.10cm / 0.82in Dimensions: • Height: 2.80cm / 1.10in • Width: 19.60cm / 7.71in • Depth: 6.50сm / 2.56in • Weight: 225g / 0.49lb Package contents: • Pill Box Our team makes your life more eco-friendly by replacing plastic housings of everyday gadgets for wooden ones. We only use solid wood and oil/wax (odorless, colorless or without traces on your hands) to protect matrial for prolonged use. Also note, that each product is handmade, and may slightly vary in color, finish, and size.

Wooden pill box with honeycomb & bees ornament will help you to keep track of your medications. A caring gift for those, who are always busy or like to keep things in order. Stay healthy! Features & specifications: • Wood types: ash wood, dried ash wood, walnut wood, oak wood, maple wood • Lid design: without edges, with magnets • Cell shape: rounded corners, with slate on the front • Cell count: 7, with weekday marks starting from Sunday • Cell width: 2.10cm / 0.82in • Cell height: 4cm / 1.57in • Cell depth: 2.10cm / 0.82in Dimensions: • Height: 3.20cm / 1.18in • Diameter: 13cm / 5.12in • Weight: 250g / 0.52lb Package contents: • Pill Box Our team makes your life more eco-friendly by replacing plastic housings of everyday gadgets for wooden ones. We only use solid wood and oil/wax (odorless, colorless or without traces on your hands) to protect matrial for prolonged use. Also note, that each product is handmade, and may slightly vary in color, finish, and size.

Wooden pill box with morning lunch evening will help you to keep track of your medications. A caring gift for those, who are always busy or like to keep things in order. Stay healthy! Features & specifications: • Wood types: ash wood, dried ash wood, walnut wood, oak wood, maple wood • Lid design: without edges, with magnets • Cell shape: rounded corners, with slate on the front • Cell count: 21, with weekday marks starting from Sunday • Cell width: 2.0cm / 0.8in • Cell height: 3.4cm / 1.33in • Cell depth: 2.10cm / 0.82in Dimensions: • Height: 2.80cm / 1.10in • Width: 19.60cm / 7.71in • Depth: 16сm / 6.2in • Weight:400g Package contents: • Pill Box Our team makes your life more eco-friendly by replacing plastic housings of everyday gadgets for wooden ones. We only use solid wood and oil/wax (odorless, colorless or without traces on your hands) to protect matrial for prolonged use. Also note, that each product is handmade, and may slightly vary in color, finish, and size.

Wooden pill box with 3D bees on flowers relief ornament will help you to keep track of your medications. A caring gift for those, who are always busy or like to keep things in order. Stay healthy! Features & specifications: • Wood types: ash wood, dried ash wood, walnut wood, oak wood, cherry wood, maple wood • Lid design: with edges, with magnets • Cell shape: rounded corners, with slate on the front • Cell count: 7, with weekday marks starting from Sunday • Cell width: 2.10cm / 0.82in • Cell height: 4cm / 1.57in • Cell depth: 2.10cm / 0.82in Dimensions: • Height: 2.80cm / 1.10in • Width: 19.60cm / 7.71in • Depth: 6.50сm / 2.56in • Weight: 225g / 0.49lb Package contents: • Pill Box Our team makes your life more eco-friendly by replacing plastic housings of everyday gadgets for wooden ones. We only use solid wood and oil/wax (odorless, colorless or without traces on your hands) to protect matrial for prolonged use. Also note, that each product is handmade, and may slightly vary in color, finish, and size.