SALES & DEALS

Ilumination led door sills Jeep Gladiator 2020-2023 with stainless steel includes 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Jeep Gladiator 2020-2023 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Aluminium door sills for BMW E34 ///M5. BMW E34 ///M5 Door sills. Door sills made of rubber-plastic with aluminum insert (hand-filled). Ready for easy installation and an instant personalized update to your interior. The product is entirely handcrafted from a laser-cut die-cast aluminum insert, allowing you to create a personalized lettering that perfectly fits your car and covers areas that your car manufacturer has neglected. It is attached to the base of the car, ensuring a secure and permanent hold. ▪ Fits all: BMW E34 ///M5.. ▪ No adhesive primer required, very easy installation without any tools or accessories. ▪ Accurate measurements. ▪ Transform your car into a personalized luxury and unique car. 1. Before permanently gluing, place the cover on the surface to understand how it will look after installation. Mark the final location with a piece of masking tape (if necessary). 2. Clean the surface where the threshold will be installed from dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. 3. Continue pressing, especially on the edges, for 30 seconds. Worldwide shipping. BMW E34 ///M5 Door sill covers. Door sill covers made of rubber-plastic with aluminum insert (hand filling). Ready for easy installation and an instant personal update of your interior. The product is entirely handcrafted from a laser-cut die-cast aluminum insert, allowing you to create a custom lettering that perfectly fits your vehicle and covers areas that your vehicle's manufacturer has neglected. It is glued to the base of the vehicle, ensuring a secure and permanent fit. ▪ Fits all: BMW E34 ///M5

This is a DIGITAL file - no physical product will be shipped! What will you get: You will receive A4 file without watermark: 1. PNG - file; 2. PNG - a file with a transparent background. 3. The size of the PNG file is 2480 × 3508 responses. Notes: Images for commercial use - no need to buy a commercial license! Attention! The file cannot be shared with other users and cannot be sold as a native digital PNG file without significant modification.

Led door sills Hyundai Elantra VI (AD) 2016+ Hyundai Elantra VI (AD) 2016+ with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon Hyundai Elantra VI (AD) 2016+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Car led door sills Ford Fusion USA 2012-2019. includes 4 pieces.  The steel footpegs are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Ford Fusion USA 2012-2019 includes 4 pieces. The steel footpegs are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Ford Fusion USA 2012-2019 includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Measurement accuracy, laser cut design, perfect fit . ▪ Turn your car into a personal app. Lettering: Standard vehicle brand or custom lettering for a $23 surcharge. ⚠ I am nstrukc and I ① Place the cover on the surface before attaching to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We that you will like our product! - Be sure to check whether the items in the photo, the interior/exterior of your car. We can take photos in different countries in Australia to choose from what our product will look like. Your product will look different than in the sun That's what we produce, beautiful and beautiful!

Car led door sills Dodge Challenger 2015-2024 Dodge Charger Challenger 2015-2021 with logo Challenger with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon Challenger 2015-2021 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Led door sills for Chevrolet Volt 2 2015-2019 Luminous car door sill covers made of stainless steel, car accessories for decorating steps with blue inscriptions, set of 4 pieces ready to be installed by an electronics specialist and customized to update your interior. This laser cut is 100% accurate to your car and fits your car perfectly. ▪ Suitable for everyone : Led door sills for Chevrolet Volt 2 2015-2019 lettering includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend that it be installed by a professional. Connection to 12 W power supply, to door lighting. ▪ Precision measurement, laser cut design ensures a perfect fit. ▪ Transform your car into a personalized luxury and unique car. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 23 . ⚠ I'm nstructs and ① Place the cover on the surface before permanently attaching it to get an idea of how it will look once installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the door threshold will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Continue pressing, especially around the edges, for 30 seconds. Connect to 12W power. to the door light. We hope you enjoy our product! - Be sure to check if some items in the product photos match your car's interior/exterior. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your product will look different in sunlight than indoors. - That's what makes our products so beautiful and unique!

Now, at the peak of popularity, jewelry in the form of insects, which we see in the collections of famous trendsetters. Therefore, a beautiful accessory embroidered in 3D technique will become your favorite and will decorate both everyday and evening looks, and will also be a great gift for any occasion for beautiful women. It is simply impossible to look away from the Beetle brooch - it glitters and shimmers. Brooches of this type will look great on your favorite clothes, handbag or backpack. You can wear brooches with anything, add originality and exclusivity to your image, because you will not find another such brooch! Hand-embroidered jewelry is incredibly beautiful and very stylish. In the manufacture of the brooch, the following materials were used: • Czech beads Preciosa • Japanese beads Miyuky • Glass rhinestones • Glass beads • Truncal • Italian sequins • The legs are made of metal pins and Czech beads and beads • The back side of the brooch is processed with eco-leather and has a Japanese clasp that will not spoil clothes • The wings are made from a wire frame, allowing the wings to take on a variety of shapes. • Tulle embroidered with metallic threads, sequins and Japanese beads was used for the wings. The product is made in a single copy. The weight of this wonderful decoration is only 10 grams!!! Size: 4.5 cm * 3.5 cm I draw your attention to the fact that each product is unique and it is impossible to repeat it exactly. If the product is sold, I will make the most similar option for you. Production of products by the individual order is possible. DELIVERY WORLDWIDE!!! Not a children's toy, lots of small parts. By purchasing this product, you are definitely buying the product that is shown in the photo and video. Requires careful storage in a separate box. The color may differ from the real one, as it depends on your screen settings.

Now at the peak of popularity, voluminous earrings of various geometric shapes, all kinds of colors, styles and directions. I present to you bright, voluminous earrings made of beads, turquoise and glass stones. Such a gift is able to evoke vivid emotions and attract the attention of others. Give a wonderful mood to yourself and others! For the manufacture of these earrings used: * Copper clasps * Czech beads Preciosa * Sequins * Turquoise beads * Crystal beads * The back side is treated with eco-leather The size: Height - 5 cm (with earmuffs) The width of the round part is 2.5 cm. Each product is unique and made in a single copy. You can be sure that you will not find such decoration anywhere else! Buying this product you get exactly the product that you see in the photo and video. The color of the product may differ from the actual product depending on the settings of your device. Shipping worldwide!

Volumetric dragonfly brooch in 3D wireframe technique A stylish and original accessory that will complement your look, become your favorite and decorate both everyday and evening looks, and also give you a great mood! The following materials were used in the work: * Glass crystal 'drop' * Gimp cord * Strass chain * Glass beads * River pearl * Japanese beads Matsyno * Sequins * Rigid rigmarole * Truncal The reverse side is genuine leather and Japanese fittings. The wings are made using a frame technique, due to which you can give them the desired shape. Size: 8 cm * 8.5 cm So, to prolong the summer - we wear bright accessories! I draw your attention to the fact that each product is unique and it is impossible to repeat it exactly. If the product is sold, I will make the most similar option for you. Production of products by the individual order is possible. Not a children's toy, lots of small parts. By purchasing this product, you are definitely buying the product that is shown in the photo and video. Requires careful storage in a separate box. The color may differ from the real one, as it depends on your screen settings.

tag holder in different colars

✔️ Premium High-Quality Material.  All of our stroller gloves are made of high quality waterproof and windproof(или Water-repellent)  fabrics which prevent rain and wind from penetrating in the wet winter season. The  hand muff  inner lining is made of a soft hypoallergenic material with a snug fitting elasticated neck and fluffy eco-fur detailing. ✔️ Warm & Comfortable  We have used the best ultra-light insulation. With a density of 400 g/m² and a temperature rating of down to -4°F/ -20°C, your hands will be kept warm in all cold weather. Additionally our  winter hand warmer design removes the need for you to touch the cold stroller handle. ✔️ Universal Fit & Size  Our stroller mitts are designed to be a universal fit. Sized at 11,9 in x 5,8 they are suitable for all styles of baby strollers , widely used for single handlebar prams, enfant car seat, high landscape strollers ,pushchairs, shopping carts, and more. Our stroller mitts fit over or into your coat sleeves, ensuring that your wrists and hands are kept warm and cozy. ✔️ Adjustable Design  We included the option of fastening your mittens together. The warmmuffs have a secure double fastening that means they can easily attach to the handle bar of your pram. Simply slip your hands in when you want to keep warm and out every time you need to tend to your baby. It is way more convenient than pulling off conventional mittens. ✔️ Gift Packaging  We want these to be a treat for you, or even a gift! If you are looking for mittens for a stroller look no further. Mummy mitts come packed in a handy, eco- friendly cotton bag which looks great as a gift but can also be used as a stylish accessory day to day. They are a perfect accessory gift idea for pregnant or new mums and dads.

Car led door sills  Chevrolet Camaro 6 2015-2023  Custom.  Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.   Suitable for everyone:  Chevrolet Camaro 6 2015-2021 included 2 pieces. 100% stainless steel (polished).  To install an electronic product, we recommend installing it by a specialist. Cnnection to power supply 12 W., to the door lighting. Measuring accuracy, laser cut design ensures perfect fit  Change your vehicle to a personalized luxury and unique vehicle.

Led door sills Dodge Charger 2015-2023 with logo Scat Pack. Dodge Charger Scat Pack Luminous Boards Custom Made Stainless Steel Car Step Protector Trim Accessories Dodge Charger Scat Pack included 4 pieces.  Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. ⚠ I n s t r u k c and I ① Place the  cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your  product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Dodge Durango SRT 2017-2023 SRT. Luminous Stainless Steel Door Sills Car Stair Decoration Accessories Blue Lettering Pack of 4 ready to be installed by an electronics specialist and custom upgrade your interior.  This laser cut is 100% accurate for your car, perfect for your car. ▪ Fit for everyone: Dodge Durango SRT with blue lettering includes 4 pcs. ▪ 100% stainless steel (polished). ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Accurate measurement, laser cut design for a perfect fit.  ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $30 surcharge. ⚠ I am nstrukc and I ① Place the cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your car. - We try to take pictures in different lighting conditions to give you an idea of how our product will look like. Your product will look different in the sun than indoors That's what makes our products so beautiful and unique!

Car led door sills KIA Scorpion 2018-2022 inscription Scorpion 4 things.  KIA Scorpion 2018-2022 inscription Scorpion with logo Scorpion Luminous High Quality Stainless Steel Door Sills Car Tread Trim Accessories Steel Boards are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: KIA Stinger 2018-2022 with logo Scorpion in a set of 4 pcs. ▪ 100% stainless steel (polished). ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Accurate measurement, laser cut design for a perfect fit . ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $30 surcharge. ⚠ I am nstrukc and I ① Place the cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your vehicle. We try to take pictures in different lighting conditions to give you an idea of how our product will look like. Your product will look different in the sun than indoors. That's what makes our products so beautiful and unique!

Светодиодные накладки на пороги Volkswagen Jetta 6 MK 4 2010-2019 гг. Аксессуары для накладки на ступеньку автомобиля из нержавеющей стали, выполненные на заказ Volkswagen Jetta 6 MK 4 2010-2019 в комплекте 4 шт.  Стальные подножки готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех: ▪ 100% нержавеющая сталь (полированная).  ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция, вырезанная лазером, обеспечивает идеальную посадку.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. ⚠ Я нструкц и я ① Поместите крышку на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости).  ② Очистите поверхность, на которой будет установлен дверной порог, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты.  ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. - Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы вы имели представление о том, как будет выглядеть наш продукт. На солнечном свете ваш продукт будет выглядеть иначе, чем в помещении. Именно это делает нашу продукцию такой красивой и уникальной!

Car led door sills Dodge Charger Scat Pack 2015+. Luminous Stainless Steel Door Sills Car Stair Decoration Accessories Blue Lettering Pack of 4 ready to be installed by an electronics specialist and custom upgrade your interior.  This laser cut is 100% accurate for your car, perfect for your car. ▪ Fit for everyone: Dodge Charger Scat Pack with blue lettering includes 4 pcs. ▪ 100% stainless steel (polished). ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Accurate measurement, laser cut design for a perfect fit.  ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $30 surcharge. ⚠ I am nstrukc and I ① Place the cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your car. - We try to take pictures in different lighting conditions to give you an idea of how our product will look like. Your product will look different in the sun than indoors That's what makes our products so beautiful and unique!

Led door sills Jeep Renegade 2014+ Running boards stainless steel luminous car step protector trim accessories Led door sills Jeep Renegade 2014+ includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Led door sills Jeep Renegade 2014+ includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Led door sills Toyota Sienna III 2011–2020 Custom ilimination led door sills Toyota Sienna III 2011–2020 Custom. Door sills with illumination Toyota Sienna III 2011–2020 with stainless steel includes 2 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look.  This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone: Toyota Sienna III 2011–2020 with stainless steel includes 2 pieces.   ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle

Подсветка светодиодных накладок на пороги Dodge Charger 2011+ с логотипом SRT и надписью SRT Dodge Charger 2011+ с логотипом SRT и надписью SRT с нержавеющей сталью в комплекте 2 шт. Стальные подножки RS Custom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех: Dodge Charger 2011+ с логотипом SRT из нержавеющей стали в комплекте 2 шт. ▪ 100% нержавеющая сталь (полированная).  ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Custom обеспечивает идеальную посадку.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я нструкц и я ① Поместите крышку RS Custom на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы дать вам представление о том, как будет выглядеть наш продукт. Ваш продукт RS Custom будет выглядеть по-другому при солнечном свете, чем в помещении. Именно это делает нашу продукцию такой красивой и уникальной!

Led door Sill Lights for Dodge Charger Scat Pack 2015-2022 Carbon 4 pcs in a set RS Custom steel running boards are ready to be installed by an electronics specialist and will individually update the look of your interior. This laser cut is 100% accurate to your car and perfectly fits your car. ▪ Fits all: Dodge Charger Scat Pack 2015-2022 ▪ 100% Stainless Steel (Polished). ▪ For the installation of an electronic product, we recommend that it be installed by a specialist. Connect to 12 watts of power, to the door light. ▪ Precision measurement, RS Castom laser cut design ensures a perfect fit. ▪ Transform your car into a personalized luxury and unique car. Lettering: Standard car brand or with a custom lettering with an additional charge of $ 30. ⚠ I nstrukc and I ① Place the RS Custom sill cover on the surface before permanent mounting to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the RS Custom sill will be installed from dust/dirt and wax. Allow it to dry completely. Remove the adhesive tapes. ③ Continue pressing, especially on the edges, for 30 seconds. Connect to 12W power. to the door light. We hope you love our product! - Be sure to check if some of the items in the product photos match the interior/exterior of your car. We do our best to photograph different lighting conditions to give you an idea of how our product will look. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Ford Fusion USA 2012+ with custom  inscription ST Ford Fusion USA 2012+ inscription ST with stainless steel includes 4 pieces. RSCastom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Ford Fusion USA 2012+ inscription ST with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 23. ⚠ I n s t r u k c and I ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Car led door sills Ford Focus III 2011-2018 inscription Focus. Ford Focus III 2011-2018 Luminous Boards Custom Made Stainless Steel Car Step Protector Trim Accessories Ford Focus III 2011-2018 included 4 pieces.  Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. ⚠ I n s t r u k c and I ① Place the  cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your  product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!