This set consists of two rings with 24 and 14 cm diameters.128 pieces of wood cut with precise angle are joined together according to mosaic principle. To get effective design brasilian cherry wood, smoke wood and maple wood were chosen. Steel core 12 mm thick inside, polished and covered with hard wax wood outside. Whole construction is strong enough to withstand loads during dymamic suspensions. Combination of two rings gives rigger ability to work with rope faster and easier. You can separate your critical suspension line on small ring, for example, to access it at any moment without risk that other suspension lines will prevent to do it. In some situations it can be very important. Properly connected rings work by the principle of hinge, taking a position relatively to each other depending on geometry of suspension and position of suspension lines.

Paw sectioned ring for shibari suspensions with steel core. Diameter: 28 cm Material: Wenge Steel core: 12 mm thick steel rod

The main idea of sectioned rings is to separate suspension lines in way that will allow rigger to tie/untie it fast with minimal risk of superimposing suspension lines on each other or clamping the rope in the narrow places of the ring construction. Steel core inside all elements of rings for safety as usual. Steel core is 12 mm thick steel rod. This ring has four separate sections for suspensions. Diameter is 24 cm. Material: Padouk