Led door sills Smart Fortwo III 2014+ with logo BRABUS (2 pcs included) RS Custom steel foot pegs are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car. ▪ Fits all:  Smart Fortwo III 2014+ with logo BRABUS (2 pcs) ▪ 100% stainless steel (polished). ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Measuring precision, RS Custom laser cut for a perfect fit. ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $30 surcharge. ⚠ I am nstrukc and I ① Place the RS Custom cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the RS Custom door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your car. We try to take pictures in different lighting conditions to give you an idea of how our product will look like. Your RS Custom product will look different in the sun than it does indoors.  That's what makes our products so beautiful and unique!

Car led door sills with illumination Ford Mustang 6 2015-2021 COYOTE_AXEL  Material stainless steel.  Inscription COYOTE_AXEL.  with stainless steel includes 2 pieces.  RS Castom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  Suitable for everyone:  Ford Mustang 6 2015-2021 COYOTE_AXEL with stainless steel includes 2 pieces.   100% stainless steel (polished).  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  Measuring accuracy, RS Castom laser cut design ensures perfect fit  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.   I n s t r u k c and I  Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).   Clean the surface on which the RS Castom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  Continue pressing, especially at the edges, for 30 seconds.   Connect to 12W power. to the door lighting. We hope you enjoy our product!. -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. -We do our best to photograph different lighting conditions to give you an idea of what our product will look like Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Ilumination led door sills Dodge Charger Radeye 2015-2021 includes 4 pieces. RS Castom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Dodge Charger 2015-2021 includes 4 pieces.   ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RSCastom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!