Toys & Games

Длина корпуса мотра: 30 mm Диаметр корпуса 28 мм Диаметр вала: 4 mm. Вес мотора: 83 грамма. Тип магнитов ротора: неодим/железо/бор 150о Максимальная мощность мотора: 500 Watt Четыре посадочных отверствия с резьбой М3

New shaftline for ECO class. Steinless steel tube 3×2 mm. Shaft 1,5×3.0 mm, with chrome coating. Bronze bearing. Adapter: for installation propeller DD 3mm  This shaftline made for installation in all eco/fsre boats. Maximum possible diameter of propeller: 33 mm. Shaftline made for best competition level results!

Set of parts for rc model hull, with following parameters: Hull long: 450 mm Hull Width: 128 mm Hull height: 92 mm Weight: 115-120 gramms Carbon kevlar, and carbon hull versions. Float chamber is glued. Hull offers with following colours: Yellow, Green, Red, White.

Fully sharped and precision dynamic balanced. For ECO boats. Parts for assembled of rc model boat.

The original gift packaging for wood maze is FREE ★ Wooden Labyrinth-labyrinth puzzle box is a board game for the whole family and a modern gift for boyfriend. Open the lid of the key maze and move the ledge upward, which moves on the inside through the labyrinth. Inside the labyrinth game, the child will be able to store his little treasures, and adults hide valuable things from prying eyes. See how to play the maze game: The puzzle maze size is: 3. 54 x 1.97 inch (9 x 5 cm) For more maze toy: https://etsy.me/2UXDNon

Our most successful for today boat is available in very limited quantities. Many time, this hull in full, 6 participants race, have 50+ laps results . Colors of hull: red, yellow, white, green. Complete of delivery: Was glued: * Rudder holder, rudder, wish all needed parts.  * Servo mounting. (for servo TYP Hitec 81)  * Motor mount for 28/29 mm motor diameter. * Shaft line with 1,5 mm shaft. * Have propeller shaft of the wire 1,5 mm, with adapter M4/3mmDD for screwing propeller. Coupling 1.50 x 4.00 mm. for connecting motor shaft and propeller shaft - complete. * Shortstop power circuits (emergency stop) - the requirement of the rules. * Paste the power wires from the emergency switch on the controller and battery. * Installed ingouing and utgouing wayer pipes, for motor/esc watercooling. * In hull, cut hole for intake and outgoing of water, for hull coup system.   You need to install: * Propeller * Servo for rudder * Motor Controller

Crochet sloth soft toy for kids

3 souvenirs ring gift size 12.5

Boat that goes directly *from the table* How come? Over the past three racing seasons, we have found the ideal position inserts all internally in the boat. Motorholder, propeller shaft line, steering ruder . This is essential for fast and high-quality drive this boat. Win Russian championship 2008, 2009, 2010, 2012, 2013 in class ECO expert Win Ukraine championship in 2008 and 2009 in classes ECO expert, ECO standard, ECO team. Win Spain championship in 2009 and 2010 class ECO expert. Win Poland championship in 2011 in class ECO Expert. Win World championship in 2015 in the class of standard ECO juniors. Win Russian Cup in 2015 in class ECO Expert. 49 laps! * Bottom of the boat is made of cloth carbon - for greater strength of the hull. * Boat glued to the inside of all the necessary installation elektroniks.   Komplet of delivery:   Was glued: * Steering column has ruder and all co-parts. * Mounting servo. * Motorholder * Propeller shaft line. * Have the propeller shaft of the wire 2 mm, with the adapter under 3 mm, for mounting propeller. * Coupling 2.00 x 4.00 mm. for connecting the motor shaft and propeller shaft - in complect. * Shortstop power circuits (emergency stop) - the requirement of the rules. * Power wires from the emergency switch on the controller and the battery. * Set the suction hose and tube water discharge, water cooling of the motor. * In hull, cutting holes, for intake and discharge of water, for hull revolution to bottom under.   In boat is installed:   * Brushless electric motor Tenshock Viper 1530 3480KV wish wathercooling, coupling connecting it to the propeller shaft. * Sharpened and balanced propeller for this boat. From stainless steel. * Electric speed controller from ZTW 80A, wish wathercooling, and FULL waterproofing. * Servo Corona 238 with metal gear and ball bearing. * LiPo Battery 3S1P 5800 mAh for limiter race. Available hull colours: Green, Yellow, Red, White. Choice please in "Options". And yet ... In the battle ....   Boat is almost no need to set up on the water ...

Length of the hull is 428 mm. The hull is already adapted for the new limiter Lithium Polymer batteries.   ALL boats are painted in matrices. Yes, and glossy automotive two-component paint firm Duxon ... Very impressive and durable. To increase the strength of the hull, along the entire central part of the bottom of the hull, a strip of carbon is pasted! This has already become a necessary attribute, with the increased speeds and capacities of these minischarges! ECO MINI Alfa boat, offered to you, is fully assembled and ready for the boat races. The so-called version of ARTR (almost ready to run). Lipo in complet! You just need to install your receiver. And that's it! Complete set of delivery:   1. LiPo battery pack with a capacity of 3S 1500 mAh 25С, or 2S 2200 mAh 25C pack.  2. Installed three-phase electric motor Tenshock Viper 1515 - one of the best solution in this class.  3. Motor water cooling is installed on the electric motor.  4. An electronic controller is installed and connected - ZTW ESC.  5. Installed and mounted the whole steering wheel system. Traction, rocking, etc. Installed steering servo.  6. Mounted shaftline: motor - coupling - propeller shaft.  7. There is a perfectly balanced, ready-to-race stainless steel propeller. You only need to connect your receiver. Only!    You need 40+ laps in race: take the Alfa MINI! JUST THRUST MY...  Evgeniy Gromov.

Attention! this instruction is only for knitting a doll without clothes, a PDF file is sent by email. Master - Class on knitting the magic girl Gnome Koudelka (part 1: doll). MK consists of 100 sheets and 360 high quality photographs. The complexity of the master class is average. Buy 2 part MK Gnomochka Kudelka (clothes) In this MK, I show you how to create a magical image of a fairy-tale Gnome, one of the characters of a whole people living in the village of gnomes, called Habalon. MK is dedicated to all those who are ready to surround themselves with the world of magic and beauty, and also create a magical image of a gnome. ***Knitting instructions are presented in Russian in PDF format (with the ability to copy the text and translate using a google translator) !!! I will send the PDF file with the pattern to your email within 30 minutes. (max 3 hours) Внимание!   это инструкция только по вязанию куклы без одежды,  файл PDF высылается на email.   Мастер - Класс по вязанию волшебной Гномочки Кудельки (1 часть: кукла). МК состоит из 100 листов и 360 фотографий высокого качества. Сложность мастер–класса средняя.  Купить 2 часть МК Гномочка Куделька (одежда) В этом МК, я Вам показываю как создать волшебный образ сказочной Гномочки, одного из персонажей целого народа, живущего в деревне гномов, под названием Хабалон. МК посвящается всем тем, кто готов окружить себя миром магии и красоты , а так же создать волшебный образ гномочки. !!! PDF файл с выкройкой отправляю на Ваш email в течении 30 минут. (макс 3 часа)

ARTR MINI MONO BOAT Size of hull: 450*135mm Installed in boat: -Watercooled system for motor and ESC. -Brushless 4 Pole Motor VZ1515/4000KV -Brushless Waterproof ESC 40A -Servo -Urgency Switch  -Number Holder -Two plastick Props 30mm diam. -All other parts assembled   Feature:   -ARTR (Almost Ready To Run)  -For control using 2 chanel remote control radio -RC functions: 1. ruder chanel: right/left   2. forward/stop with proportional control -With 1 brushless electric motor   -Model is ready for operation once the receiver have been installed    -Material: Glass Firber/Carbon Firber/Kelvar. PLEASE make your choise in "Option". -Hull color: Glass fiber boats: White/Racing Red/Yellow Carbon fiber: black carbon color: White/Racing Red/Yellow Kevlar carbon fiber: black/yellow fiber color: White/Racing Red/Yellow -In ARTA (Almost Readu To Assembled) version: You will have glass fiber, or carbon fiber, or kevlar/carbon fiber, (choice your wishes, in Options) painted, with installed fully glued parts, inside hull. All electrick parts, you must self installed, on your boat. All electric parts, in complet. -Watercooled system for motor and ESC. -Brushless 4 Pole Motor VZ1515/4000 KV -Brushless Waterproof ESC 40A -Servo -Urgency Switch  -Number Holder -Two plastick Props -All other parts for assembled.   Please, make your choise!

Интерактивная головоломка для кошек, которая поможет развлечь вашу кошку, даже если вас нет дома. Деревянная игрушка кошка подойдет котенку и взрослой кошке. Игрушечная коробка для кошек изготовлена из экологически чистых игрушечных материалов. Внутри деревянная игрушка-кошка - звонкий шарик. Это игра для кошек, полностью домашние игрушки для кошек.  При желании вы можете сделать гравировку с именем вашего питомца на игрушке для кошки.

Wrapping screw-analogue of plastic propeller, from Graupner. Propellers pro milled from a single piece of Duralumin, on a program milling machine. Precision and sameness of blades: maximum possiblity! These propellers,  are ideally suited to all classes HYDRO/MONO boats. Specifications: Rotation: Right, Left (please, select in Split option) Materialal: duralumin. Props diameter (please, select in Split option) Ratio of props, (step to diameter): 1.4 (diameter digit, multiply by 1.4-get step in mm.) Internal thread in propeller hub: M 4 or Drive Dog (DD) 4.75 mm (3/16 ") (please, select in Split option) Diameter of propeller hub: 6.5 mm. Weight: 2.5-4 grams.   Propellers isis practical do not need additional balancing. The obvious advantages of screws of such performance: their hardness and durability with respect to plastic propellers; Their accuracy of manufacture and sameness of geometrical parameters of both blades, at propellers o ofthe same type size; The debugging and additional balancing of propellers (if required), are made with minimal effort.

First, fully selfmade MONO1 from Ecomaster. We tested this hull all season... Results? 30+.....   Dimensions: 650×185 mm Material of hull: carbon kevlar. Colours of hull: white, green, yellow, white. Full carbon version is possible. And there's combinations (+20€). Please, make your choice on option.   Complete of delivery: hull with glued float chamber. assembling dimensions.

additional parts for a children's kitchen set

Attention! PDF file is sent by email.  Master - Class on knitting the magic girl Gnome Koudelka (part 2: clothes). MK consists of 106 sheets and 403 high quality photographs. The complexity of the master class is average. Buy 1 part MK Gnomochka Koudelka (doll) In this MK, I show you how to create bright magical clothes and complete the image of a fabulous Gnome, one of the characters of a whole people living in a village of gnomes called Habalon. MK is dedicated to all those who are ready to surround themselves with the world of magic and beauty, and also create a magical image of a gnome. ***Knitting instructions are presented in Russian in PDF format (with the ability to copy the text and translate using a google translator) !!! I will send the PDF file with the pattern to your email within 30 minutes. (max 3 hours) Внимание! этот мастер класс только по вязанию одежды для куклы,  файл PDF высылается на email.  Мастер - Класс по вязанию волшебной Гномочки Кудельки (2 часть: одежда). МК состоит из 106 листов и 403 фотографий высокого качества. Сложность мастер–класса средняя. Купить 1 часть МК Гномочка Куделька (кукла) В этом МК, я Вам показываю как создать яркую волшебную одежду и завершить образ сказочной Гномочки, одного из персонажей целого народа, живущего в деревне гномов, под названием Хабалон. МК посвящается всем тем, кто готов окружить себя миром магии и красоты , а так же создать волшебный образ гномочки.

ECO MINI EXPERT.   Budget version for beginners.   Included you get everything except control equipment and the charger.   Our new ECO concept ...   For a long time I have swarmed up with the idea about a project budget.   It should not only deal with jobs and blowing, but also to do something for the pioneers, that is sudomodelistov beginners who are taking their first steps in the subject ECO boats.   Prerequisites for the construction of of such a model: As practice shows - to collect effectively driving MINI ECO (just like ECO) - without complex necessary skills from zero level - it is almost impossible. As a result, much deliberation, the purpose of which was: SIMPLIFY BEGINNER START in ECO RACE, was implemented this one project that I bring to your attention: So. We have 200% racing hull MINI ECO 2007 Made in armor-piercing performance for *beginner* - especially added extra layers of fiberglass .. Then we choose on Hobby King most budget, but checked on many MINI boats and ensure a good motor, battery and servos. Added to the set - controller from a reputable manufacturer.   All this was inserted into the body of the ECO MINI 2007, which we starting all the necessary hardware: CNC milled motormount, Racing propeller, maded and balance from Gromov, Assembled steering ruder unit, Glued emergency switch for stopped the boat. Glued tubes for input - output motor cooling water, Cut in the right places inlets - drain water barrier to flip the boat.   Even water cooling on the motor installed and connected silicone tubing ...   You will only need installed reciever insert in your boat! And nothing more!!!   The boat has been tested and tested on the waves, and in calm weather.   Here's a video of the first test:   As a result, we are fully *ready to fight* MINI ECO 2007 in garanteed driving condition, received the affliction which our *pioneer* EXACTLY not disappointed in ECO works.   This was my key idea that was started this whole budget epic ...   This model will become a starting platform that can set the tone for further work in the direction of our ECO *beginner*.   Completeness MINI ECO 2007 ARTR:   Fully assembled boat. Not included only receiver. Installed motor Turnigy 2445 3000KV On the motor installed water cooling spiral of the aluminum tube. Bolted to the motor coupling 3x2mm Installed and connected to the motor controller 30A. With watercooling. Inserted battery 3S1P 1500mAh. Compiled steering parts wish micro servo. Rudder installed. There jumper to interrupt the power circuit. Cover hatch in complete.   Place your receiver in boat and in fight!   Turning the boat on the water you should be exposed to at least 2 meters! Otherwise, your boat will be dived! Be aware of this!   On my mini - turning diameter of 3 meters! The race is quite enough! BELIEVE ME!   Good luck in boat battles, *beginner*! P.S. this complet, get 41 laps in 2018 year. In Holland race.

King k rool plush.The toy is made of plush material. Hollafiber filler. Height of finished product is 10-11 inches. I want to draw your attention to the details. Most of the work is done by hand, for this reason the elements of the toy differ slightly from the original photo. Shades of fabric may also vary slightly if there are no materials on sale as on the sample. Individual order. You can make your amendments by prior arrangement with me. You also have the opportunity to order a toy that you did not find with me. Just write me about it personally. The minimum length (width) of the product is 10 inches (25 centimeters). Materials used: As the main material, I use plush, microplush and plush bielastan. Also, for various details, knitwear, cotton, leatherette and other materials are used. Based on toys, at your request, I can use a wire frame that is braided with synthetic winterizer to give the product softness, as well as to make it safe to use. The filler is hollafiber - a soft hypoallergenic material. Accessories and textile paint can also be used. Product Care: * Suitable for dry cleaning only. * Wash the product can not, because it can be deformed. Work execution and delivery: *** If you have an individual order, please send me a photo or drawing, as well as accurately describe all the wishes that you would like to be applied in the work. Then an individual listing will be created. *** All orders are executed only in order of priority after payment. *** The duration of the work on average varies from 3 to 6 weeks, sometimes it can take longer. It depends on the: 1. Queue of orders. 2. The availability of materials. 3. The complexity of the work. Delivery: The products that you see in the store are often missing, so it will take time to complete them. I am in Ukraine, delivery to your country takes an average of 2-4 weeks. *****Please note that the delivery may take longer before the holidays, especially this Christmas and New Year. You can order express delivery, which takes 3-4 business days, unlike standard mail. Therefore, if it is important for you that the Christmas present arrives on time, make an order in advance or use express delivery. After sending, you will receive a photo and track tracking number.

Made of natural wood - maple burl coated with epoxy. Coloring pigment: gold + red + bronze + black, back side - gold. The base is covered with felt. The back side and the base have a flat surface. Dimensions: height - 120 mm (4,72"), width - 225 mm (8,85"), maximum depth of the base - 43 mm (1,69"). It is used as a decorative ornament in various decor options. Shipping from Ukraine - International Air Post. All world. Ready to answer any questions.

Made of natural wood - maple burl coated with epoxy. Coloring pigment: gold + bronze + black, back side - gold. The base is covered with felt. The back side and the base have a flat surface. Dimensions: height - 93 mm (3,66"), width - 245 mm (9,64"), maximum depth of the base - 45 mm (1,77"). It is used as a decorative ornament in various decor options. Shipping from Ukraine - International Air Post. All world. Ready to answer any questions.

Fox wood plate, pyramid stacker toy, lacing toy and hopping bunny

Box for playing cards . You are tired of loosing your playing cards? The carton box is constantly broken? Playing card storage box to keep your deck safe and sound. . Surprise other players with how unique you are. Size is appropriate to the classic size of playing cards. Unique, stylish present for playing game lovers. It is a wooden handmade item. Best quality will surprise you! Box doesn't contain  cards. Inner size: 5,5сm x 7сm x 10сm (1.98 "x 2.75" x 3.93 ") Materials: birch plywood, sapele veneer, wide Italian elastic band, wax thread. The lid is hand-sewn with waxed thread. The letters are sewn to the elastic with waxed thread. On the back of the box there are anti-slip silicone feet.

Real Steel Versus 2 pack Atom vs Zeus  new factory sealed, battary not work