PWM(S.Bus)+LANC+12VDC BMMCC Angle Breakout Expansion Box Module

$55.00
Email seller
Condition:
New other
RADIOPROEKTOR
20 days
HU476123
25 item(s)
+
Ukrainian Post: $7.00

PWM(S.Bus)+LANC+12V DC Angle Breakout Expansion Box Module developed by RADIOPROEKTOR for Blackmagic Micro Cinema Camera (BMMCC) and Blackmagic Micro Studio Camera 4K (BMMSC).

New improved housing now CNC machined of Aluminum Alloy and anodized in black color!

Angle shape provides compact and secure cable management without mess of wires around the camera. Box compatible with SmallRig cage and can be used without any cage as well.

Box uses high quality TRS connectors made by Lumberg/EST (Germany/Japan). Everything is connected with tiny Dupont Jumpers, so you can open the box and easily change cables configuration for your needs just in few minutes. This makes it compatible with any PWM and S.Bus camera controllers, allow for Composite video signal output, Genlock/Reference input or any other desired option.

Please specify before purchase if you need S.Bus or PWM or any other pinout for 3.5mm jack socket. Also let me know if you use Micro Cinema or Micro Studio Camera because they have slightly different pinout. Everything is connected with tiny Dupont Jumpers so you can change pinout any time later but it just be easier to use Expansion Box without any intervention.

Little FAQ:

  • PWM is very simple DIY friendly interface but slightly limited. It is great if you need only few external buttons. With 3.5mm stereo jack you can use two PWM channels. For example with simple On/Off switchers you can control Record/Stop and ISO. Anyway if you need S.Bus in future you can open the box, take tweezers and carefully change positions of BLUE and GREEN cables.
  • S.Bus is more complicated interface. It can control all camera options with one single cable, but needs external power and Arduino based controller.
  • LANC is another type of common interface. It is always mapped to separate bottom 2.5mm jack socket and can be used simultaneously with PWM/S.Bus.


!!! PLEASE READ THIS DESCRIPTION BEFORE MAKE ORDER !!!

  • This Expansion designed to fit to SmallRig BMMCC 1773 cage and to dimensions of my other accessories. It also fits to WoodenCamera cage but very tight. In some situations it may not fit.
  • This Expansion Box designed as flexible and free adjustable DIY device. It is not made for any specific single controller in mind. Everything is connected with tiny Dupont Jumpers, so you can open the box and easily change cables configuration.
  • All pinout specs and connection charts information is available here.
  • This Expansion Box provides separate S.Bus (or PWM or Genlock or Analogue video out), LANC and DC power connection.
  • This Expansion Box uses 3 pole TRS jack sockets.
  • !!! Please note that CGpro Remote and One Little Remote Light Controllers use 4 pole 3.5mm TRRS jack connection that combines S.Bus+LANC interface in one cable. They will not work "as is" with this Expansion Box. However to use those controllers with this Expansion Box you need custom made DIY cable. 4 pole TRRS jack to 3 pole TRS jack. See this post for details http://www.bmcuser.com/showthread.php?19574-PWM(S-... !!!
  • I don't have planes to implement 4 pole 3.5mm TRRS jack socket connection into my Expansion Box because i think that it is just bad idea to mix two different interfaces (S.Bus and LANC) in one cable. It is also impossible preserve free adjustable concept if use 4 pole TRRS sockets.


Tech Specs:

  • 1 x 3.5mm TRS jack socket for PWM, S.Bus or any other user selectable inputs/outputs.
  • 1 x 2.5mm TRS jack socket for LANC input.
  • 1 x 5.5x2.1mm (5.5x2.5mm compatible) 12V DC power input socket.
  • 1 x DB-HD15 serial connector.
  • Dimensions: 34x34x29mm
  • Weight: 40g


Package includes

  • - Angle Breakout Expansion Box
  • - 2pcs #4-40UNC screws (Stainless Steel or Black Oxide Steel for your choice)
  • - 3/32 allen wrench hex key


Installation tutorial:

  1. Insert Expansion Box into the camera.
  2. Tight UPPER screw.
  3. Slightly tight LOWER screw. (If you tight lower screw first, this can cause Expansion Box inserted unevenly because camera side has slightly curved shape)


Wires inside the box for BMMCC are marked with colors:

  • S.Bus power (tip) [BLUE]
  • S.Bus signal (ring) [GREEN]
  • S.Bus ground (sleeve) [WHITE]
  • LANC signal (tip) [YELLOW]
  • LANC power (ring) [ORANGE]
  • LANC ground (sleeve) [GREY]
  • Power +12V DC (center pin) [RED]
  • Power ground [BLACK]


Wires inside the box for BMMSC are marked with colors:

  • Genlock (tip) [BLUE]
  • S.Bus signal (ring) [GREEN]
  • Genlock/S.Bus ground (sleeve) [WHITE]
  • LANC signal (tip) [YELLOW]
  • LANC power (ring) [ORANGE]
  • LANC ground (sleeve) [GREY]
  • Power +12V DC (center pin) [RED]
  • Power ground [BLACK]


More info about earlier development of this Expansion Box Module: http://www.bmcuser.com/showthread.php?19574
Recommended angle HDMI cables: http://bmcuser.com/showthread.php?19313-Angle-HDMI...
Recommended low profile angle 3.5mm trs jack cables: http://bmcuser.com/showthread.php?19574-PWM(S-BUS)...
BMMCC/BMMSC S.Bus, PWM, LANC controllers database: http://www.bmcuser.com/showthread.php?20363

Very well made and so useful I'd say BM should throw these in the box with new cameras!
Write a review
Payment

I accept PayPal or Credit Cards only.
• Your items will be made and shipped only after the payment is cleared.
• If you don't have Paypal account and would like to pay with your Credit Card, check this step-by-step tutorial on PayPal:
https://www.paypal.com/webapps/mpp/pay-online

Your order will be shipped only after the payment is cleared. This means if you pay via Paypal e-checks there could be delay in 3-5 business days. You can check the status of your payment in your Paypal account or in the correspond invoice here on Lavky.

Shipping

All items will be carefully packaged and sent within 1-3 business days after payment is received!
(Some items may need more time. If processing time is more than 7 days - you will find it in item description )

Shipping address:
• Please make sure your shipping address is correct during the checkout. I will send your package to this address and not the Paypal one.

Terms & Delivery time:
• Shipping usually takes about 2-4 weeks.

Please note, transit time may vary depending on your location and customs processing, so I can’t guarantee exact arrival time.
Here are approximate terms of shipping:
- USA: 1,5 - 2,5 weeks
- Canada: 2-3 weeks
- Australia: 2-3 weeks (sometimes longer, depending on work of Australian custom)
- Europe: 1-2 weeks
- Rest of World: 2-3 weeks

Shipping method:
• All packages are sent via international registered airmail from Odesa, Ukraine.
It includes tracking number (it will be sent in e-mail notification). Each package has delivery confirmation.
Please note: some local postal services do not provide on-line tracking for international registered airmail. Such as: USA, Germany, UK, France, Italy and Australian post. So I can track your package only while it's in Ukraine.

• Express shipping via EMS is available upon request. Please contact me if you need it before placing an order, so we can adjust shipping prices.

Custom Fees and Duties

• Customers are responsible for any fees, taxes, and duties associated with shipping & purchasing to their respective countries.

Packaging:

• Your order will come in safe cardboard box

Refunds and Exchanges

I want my clients to be happy, so report me if you have any problems.

If you are not satisfied with your items / service for any reason, please contact me with the problem before leaving a feedback.

Additional Policies and FAQs

Feel free to contact me with any questions.

cs-cart licences, cs-cart add-ons