Electronics & Circuitry

French couture embroidery prefers to use a twisted faceted spring to give a metallic shine to the decorative elements of embroidery and handmade jewelryy in classic style with French Wire, also called Gimp or Bullion. Style:- French Metallic Rough Wire 1mm Very HARD Circular Thin Stiff Wire (Kangani) (Jaseron) Length - 1 meter Colour:- Begie Size:- 1.25 mm in Diameter Weight:- 5 Gram/Packet Product Details:- These Metallic wire are used to do embroidery. it can also be used as a spacer while beading for necklaces and other jewelry items French Wire is also known as Bullion and Gimp! It is very fine wire which has been tightly coiled to form a very narrow tube. Colors of what you get may be different from the photo. Combined Shipping Policy: If you buy more than 1 item, Shipping will be combined. Worldwide Shipping Delivery includes a tracking number to trackelivery time: 15-35 days All orders are shipped with track number, but not all countries track small packages Contact Us For all questions you can contact me Be free and brave to do it, I'm happy to answer any questions. Shipping worldwide All goods are carefully packed. Contact me, if you have any question

1 LOT - 10pcs Base Plate fit Fender Stratocaster Pickups

Looking for a high-quality  pulse metal detector  that can handle any task? Look no further than the  Clone PI W  with High-Quality Assembly - Brand New! This modern, microprocessor-based device is designed to search for metal objects in a wide variety of environments, including the ground, sand, walls, dense grass, and more. With interchangeable sensors of different sizes, you can easily customize your search to meet your specific needs. ( Replacement sensors are not included! ) This unit features a sleek black panel color , firmware 1.2.2m, and includes mating connectors to the sensor. The cases are  D110A , and the  battery 18650 is not included . The  maximum depth  of detection of objects is impressive, with a ring sensor (diameter 19cm) able to detect a coin with a  diameter of 25mm   up to 30cm  away, and a helmet  up to 60cm  away. The maximum depth of  up to 150cm .  With a depth loop probe (1,2х1,2m),  Helmet - up to 140cm ,  steel barrel 200l  -  up to 200cm,   the maximum depth is  up to 300cm ! Indications are provided through  visual LED  and  audio multitonal alerts , while the device operates in  static search  mode. With a fully charged battery, continuous operation time can last  up to 15 hours . Please note that the operating conditions include an air temperature range of -10...+50ºС, atmospheric pressure of 710...800 mm Hg, and relative humidity up to 95% at temperature +25ºС. It is crucial to avoid operating the unit with the cover removed or with damaged insulation of the sensor cable. This pulse metal detector is based on the principle of excitation of pulse eddy currents in the metal object and measurement of the secondary electromagnetic field which induces these currents. With the built-in microprocessor, the device analyzes this over-radiated signal and produces the corresponding indication of the detected object. Shipping times  can range from 2 weeks to 45 days depending on logistics. Please note that the current situation may cause difficulties, but parcels are still being delivered. Get your hands on the Clone PI W with High-Quality Assembly - Brand New today!

2 SOCKETS for Russian tubes gi46b, gi23b The GI-46b, GI-23b microwave triode operates as an oscillator or an amplifier. This item is required for the construction of the power amplifier. Items is new in good Working Condition! Material: socket machined duralumin; nuts and bolts, washers are made of ferrous metal; insulators are made from PTFE (teflon). Weight socket: 2 * 0,236 kg. Items will be shipped from Ukraine every day after payment is received and verified.

2pc TELE  PICKUPS   SET VERY BEAUTY  FOR ROCK BLUES POP ETC

3 Led bolbs SET

30 meters wire 22 awg  old  russian audio wires 

4 strings for luminaire, SET

5 Pin Din male to female extension cable Length: 160cm  Color: Black Interconnects MIDI devices such as keyboards, computers, etc.

Box of 50 pcs. power pentodes 6P1P-EV with Noval socket (9-pin). With a red dot, and "OTK" (best military quality). As you can see from the photo, not all tubes are marked with the Svetlana logo, but it is absolutely brand new opened box. 6P1P-EV is similar to 6AQ5, EL90 and 6V6 tubes but with different pinout. Direct replacement 6P1 in Chinese tube amps. Content of precious metals (in one tube): gold - 0.007036 grams platinum - 0.000162 grams Tube factory "Svetlana" (St Petersburg)=C=

The original case made of polywood and venner. 

BIG LOT Guitar Humbucker pickups - 6 Set (12 pc) Lot wholesale pickups for very good price including screw and spring and bonus !!!! few best capacitors for you guitars!

Matched pair of original russian high grade military tubes 6ZH1P-EV. Popular tubes, replacement for EF95, 6AK5,6J1. Tested by precision tubetester L3-3. The parameters are measured at Ua = Ug2 = 121V , Rk = 200 Ohm  Grid in tubes contains gold and platinum. long life more then 5000h. Pull up from big factory box. "Voschod" plant 1991.

80 x NOS .029uF 29nf 200V Vintage 1951 John E. Fast PIO TONE AUDIO CAPACITORS best music component  for Gibson & Fender

Abbas Esoteric Audio DAC 4.0 Please note, I'm selling the fully operational circuit board without the housing. Please feel free to ask for more information or pictures. I'm shipping for free. This is a custom built non-oversampling (NOS) DAC by Abbas Zulfugarov, the designer of the more mainstream (but lower end) SW1X DACs. It is arguably Abbas' highest-end offering, built around two new-old-stock Burr Brown PCM58P R2R (multibit resistor ladder) chips. The now-discontinued PCM58P had the highest true bit depth of any mainstream R2R chip owing to its unique outboard trim pots that allows each chip to be individually compensated at installation. The presentation is a bit more honest/less romantic than TDA1541 and PCM63. This DAC has one of the most natural timbres of any DAC I've tried. Far superior to Hugo products, Metrum's Pavane/Adagio gets closer but I still think Abbas wins on naturalness. This DAC sounds analog! It is not souped up and edgy like the delta-sigma Mytek stuff. The output stage of this DAC is a copy of Kondo's Audio Note SRPP stage, based on matched 6bl7 tubes. I have a spare set that I will include. It uses Black Gate capacitors around the DAC chips, and AudioNote Tantalum resistors in the audio path. Abbas is known for his fanatical devotion to parts selection, virtually all of which are discontinued or vintage, salvaged from old German and ex-Soviet equipment. Everything is discrete and oversized—you will not find any surface-mount nonsense inside. I can accept PayPal friends and family, please let me know if this is the option for you.

Accessories for light-up numbers - dimmers and adapters

Adapter 564T4 TQFP64 solder TNM5000 The scope of delivery; 1. Adapter 564T4 TQFP64 solder TNM5000 - 1PCS Application example, programming of microcircuits (microcontrollers) by the TNM5000 programmer: MC68HC08AS32 A2C00038136-0L72A MC68HC08AZ32 MC68HC08AZ60 MC68HC908AB32 MC68HC908AS60 MC68HC908AZ32A MC68HC908AZ48A MC68HC908AZ60 MC68HC908AZ60A SC552091CFU-0L40X MC68HC908AZ hc 908 2j74y 4j74 1j35d Atmega64a and others. We only accept payments via PayPal. Warranty & Return: All products have been checked and packaged in good condition before dispatch. In case the item is defective, please inform us within 30 days of receipt, we will replace a new one. No Refunds are offered. Buyers have to pay for the return cost and we will pay the cost for resend. If you do not understand its purpose - please not buy !

Aluminum remote controller for the Flux amp

Aluminum remote controller for the Flux amp

Ammeter voltmeter M2020 in excellent condition! 1984... Mirror scale, etc. Connoisseurs, solid and reliable precision instrument. Excellent condition! Checked.

Amplifier repair service

Angle HDMI Clamp Lock Module for Blackmagic Micro Cinema Camera SmallRig 1773 Cage with Ugreen angle HDMI adapter developed by RADIOPROEKTOR. BMMCC HDMI port is rather shaky, especially when used with angle HDMI adapters, so i decide to develop a clamp to solve this problem. See development history of this product here http://www.bmcuser.com/showthread.php?18858 !!! Please note that this clamp designed to work with SmallRig Cage and Ugreen angle HDMI adapter only !!! Air Mail Worldwide shipping cost or UPS Express shipping cost should be added to cart separately. For any details contact me directly to radioproektor (@) gmail . com Recommended HDMI cables list: Sanho HyperThin HDMI Cable https://www.adorama.com/l/Home-Electronics/Home-Th... https://www.hypershop.com/collections/hdmi-cables Ugreen custom length low profile slim HDMI cable: https://www.ebay.com/itm/UGREEN-Premium-Metal-HDMI... 30cm-300cm length angle HDMI cables: https://www.ebay.com/sch/i.html?_nkw=30cm-300cm+hd... Assembled kit includes: 1x Angle HDMI clamp front and rear parts (CNC machined aluminum alloy, anodized in black color). 2x 1/4"-20 3/8" length button head black oxide screws. 2x M4 Stainless Steel grub screws. 1x 2mm allen wrench hex key. 1x Ugreen Angle HDMI adapter Weight: 35g Installation tutorial: Plug Ugreen HDMI adapter to the camera. Adjust and fix front element of the clamp. Adjust and fix rear element of the clamp. Slightly tight two small screws on rear element.

ARRI type Offset Rosette Mount Module for BMMCC/BMMSC developed by RADIOPROEKTOR. The main idea of this accessory is to allow easy access to camera buttons and same time keep rosette mounting point as close as possible to camera gravity center. This mount also can be used with many other rigs and cages with 9mm distance pitch between threaded holes. Symmetrical dual handle config possible as well. It is precisely CNC machined and uses quality stainless steel ARRI type rosettes. See development history of this product here http://www.bmcuser.com/showthread.php?20764 Air Mail Worldwide shipping cost or UPS Express shipping cost should be added to cart separately. For any details contact me directly to radioproektor (@) gmail . com Assembled kit includes: 1x Rosette Mount (CNC machined aluminum alloy, anodized in black color). 1x Stainless Steel ARRI type Rosette. 2x 1/4"-20 5/8" length Black Oxide button head screws. 4x M3 Stainless Steel screws. Tech Specs: ARRI Standard Rosette with M6 thread. Distance between mounting holes centers: 18mm. Weight: 47g.

assorted 20 meters wire for amplifier quality old  russian  wires