Led door sills Renault Duster 2010-2018 with stainless steel includes 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Renault Duster 2010-2018 with stainless steel includes 4 pieces.  ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.  ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds.  Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Led door sills Jeep Grand Cherokee IV 2010-2021  Jeep Grand Cherokee IV 2010-2021  RS Custom are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone:  Door sills Jeep Grand Cherokee IV 2010-2021 8  ▪ 100% stainless steel (polished).  ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting.  ▪ Measuring precision,  RS Custom laser cut for a perfect fit. Steel running boards Jeep Grand Cherokee IV 2010-2021RS Custom are ready to be installed by an electronics specialist and custom upgrade your interior. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone: Jeep Grand Cherokee IV 2010-2021   ▪ 100% stainless steel (polished).  ▪ To install an electronic product, it is recommended to have it installed by a specialist. Electrical connection 12 W, for door lighting. ▪ Measuring precision, RS Custom laser cut for a perfect fit.  ▪ Transform your car into a custom luxury and unique vehicle. Lettering: Standard vehicle brand or custom lettering for a $30 surcharge.   ⚠ I am nstrukc and I  ① Place the RS Custom cover on the surface before permanent fixing to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface where the RS Custom door sill will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes.  ③ Keep pressing, especially around the edges, for 30 seconds. Connect to 12W power supply. for door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos match the interior/exterior of your car. - We try to take pictures in different lighting conditions to give you an idea of how our product will look like.  -Your RS Custom product will look different in the sun than it does indoors.  -That's what makes our products so beautiful and unique!

Led door sills Mitsubishi Lancer X RALLIART Color black gloss The material is plastic. Color black gloss. Color black gloss. lettering in blue includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Mitsubishi Lancer X RALLIART lettering in blue includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  -Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Car led door sills with illumination Chrysler 300 C with logo 300 C Black plastic with stainless steel includes 4 pieces.RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone: Chrysler 300 C with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist.Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds.Connect to 12W power. to the door lighting.We hope you enjoy our product!-Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.- We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Ilumination led door sills with illumination Chrysler 300 S with logo 300 S Black plastic with stainless steel includes 4 pieces.RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  ▪ Suitable for everyone: Chrysler 300 S with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist.Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds.Connect to 12W power. to the door lighting.We hope you enjoy our product!-Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.- We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Chrysler 300 C Door sills with illumination Chrysler 300 C with logo 300 C with stainless steel includes 4 pieces.  RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car.  Suitable for everyone:  Chrysler 300 C with stainless steel includes 4 pieces.  100% stainless steel (polished).  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  Measuring accuracy, RS Castom laser cut design ensures perfect fit  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30.   I n s t r u k c and I  Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  Clean the surface on which the RS Castom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  Continue pressing, especially at the edges, for 30 seconds.   Connect to 12 W power. to the door lighting. We hope you enjoy our product!  Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Aluminum pads for BMW X 5 E53 AC Schnitzer custom. aluminum material. Replica of the original. These pads are for cars with a manual transmission. Installing the turn of regular pads on pedal cars. Available for vehicles with manual and automatic transmission. Delivery worldwide. custom. aluminum material. Replica of the original. These pads are for cars with a manual transmission. Installing the turn of regular pads on pedal cars. Available for vehicles with manual and automatic transmission. Delivery worldwide.

Door sills with illumination Renault Logan II 2013+ with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Renault Logan II 2013+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist.Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. Continue pressing, especially at the edges, for 30 seconds.Connect to 12W power. to the door lighting.We hope you enjoy our product!-Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.- We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills Renault Megane III 2009-2015 with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Renault Megane III 2009-2015  with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist.Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. Continue pressing, especially at the edges, for 30 seconds.Connect to 12W power. to the door lighting.We hope you enjoy our product!-Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.- We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills Nissan Qashqai II 2014+ with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Nissan Qashqai II 2014+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist.Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. Continue pressing, especially at the edges, for 30 seconds.Connect to 12W power. to the door lighting. We hope you enjoy our product!-Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Dodge RAM 2500 with logo KONING. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Dodge RAM 2500 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 23.  ⚠ I n s t r u k c and I  ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RSCastom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors.   This is what makes our products so beautiful and unique!

Led door sills Ford Fusion 2012-2021 included 4 piece. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Ford Fusion 2012-2021 ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Led door sills Mercedes-Benz ML W164 2005-2011 with logo AMG  Mercedes-Benz ML W164 2005-2011 with logo AMG  with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Mercedes-Benz ML W164 2005-2011 with logo AMG with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - You RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Led door sills Subaru XV I 2011-2017 with logo XV Subaru XV I 2011-2017 with logo XV with stainless steel includes 2 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Subaru XV I 2011-2017 with logo XV with stainless steel includes 2 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - You RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Led door sills Subaru XV I 2011-2017 with logo XV Subaru XV I 2011-2017 with logo XV with stainless steel includes 2 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Subaru XV I 2011-2017with logo XV with stainless steel includes 2 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - You RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Светодиодные накладки на пороги Cadillac Escalade IV 2014-2020 с логотипом Escalade  Cadillac Escalade IV 2014-2020 с логотипом Escalade из нержавеющей стали в комплекте 2 шт. Стальные подножки RS Custom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех: Cadillac Escalade IV 2014-2020 с логотипом Escalade из нержавеющей стали в комплекте 2 шт. ▪ 100% нержавеющая сталь (полированная).  ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Custom обеспечивает идеальную посадку.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 23$. ⚠ Я нструкц и я ① Поместите крышку RS Custom на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы дать вам представление о том, как будет выглядеть наш продукт. - Ты Продукт RS Custom будет выглядеть по-другому при солнечном свете, чем в помещении.  Именно это делает нашу продукцию такой красивой и уникальной!

Светодиодные накладки на пороги Cadillac Escalade IV 2014-2020 с логотипом Escalade  Cadillac Escalade IV 2014-2020 с логотипом Escalade из нержавеющей стали в комплекте 2 шт. Стальные подножки RS Custom готовы к установке специалистом по электронике и индивидуально обновят внешний вид вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех: Cadillac Escalade IV 2014-2020 с логотипом Escalade из нержавеющей стали в комплекте 2 шт. ▪ 100% нержавеющая сталь (полированная).  ▪ Для установки электронного продукта мы рекомендуем его установить специалисту. Подключение к электросети 12 Вт, к освещению двери. ▪ Точность измерения, конструкция лазерной резки RS Custom обеспечивает идеальную посадку.  ▪ Превратите свой автомобиль в персонализированный роскошный и уникальный автомобиль. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 23$. ⚠ Я нструкц и я ① Поместите крышку RS Custom на поверхность, прежде чем закрепить ее на постоянной основе, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости). ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к мощности 12 Вт. к освещению двери. Мы надеемся, что вам понравится наш продукт! -Обязательно проверьте, соответствуют ли некоторые товары на фотографиях товара интерьеру/экстерьеру вашего автомобиля. Мы делаем все возможное, чтобы сфотографировать различные условия освещения, чтобы дать вам представление о том, как будет выглядеть наш продукт. - Ты Продукт RS Custom будет выглядеть по-другому при солнечном свете, чем в помещении.  Именно это делает нашу продукцию такой красивой и уникальной!

LED door sills for Mercedes-Benz E W212 2009-2016 with Mercedes-Benz logo Mercedes-Benz E W212 2009-2016 with Mercedes-Benz logo in stainless steel, set of 2 pcs. The RS Custom steel running boards are ready for installation by an electronics specialist and will individually update the look of your interior. This laser cut is 100% accurate for your car and fits your car perfectly. ▪ Fits all: Mercedes-Benz E W212 2009-2016 with Mercedes-Benz logo in stainless steel, set of 4  pcs. ▪ 100% stainless steel (polished). ▪ For the installation of the electronic product, we recommend that it be installed by a specialist. Connection to the 12W power supply, to the door lighting. ▪ Precision-made, laser-cut RS Custom design ensures a perfect fit. ▪ Transform your car into a personalized luxury and unique vehicle. Lettering: Standard car brand or with a custom lettering with an extra charge of $23. ⚠ Instructions ① Place the RS Custom cover on the surface before permanently fixing it to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the RS Custom threshold will be installed from dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially on the edges, for 30 seconds. Connect to 12W power to the door light. We hope you like our product! -Please be sure to check if some of the items in the product photos match the interior/exterior of your car. We do our best to take photos of different lighting conditions to give you an idea of what our product will look like. - You The RS Custom product will look different in sunlight than it does indoors. This is what makes our products so beautiful and unique!

Светодиодная подсветка накладок на пороги Chrysler 300 C с логотипом 300 C Chrysler 300 C RS Custom готов к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Подходит для всех:  Накладки на пороги Крайслер 300 С ▪ 100% нержавеющая сталь (полированная).  ▪ Для установки электронного продукта рекомендуется поручить его установку специалисту. Электрическое подключение 12 Вт, для освещения двери.  ▪ Точность измерения,  Лазерная резка RS Custom для идеальной посадки. Стальные подножки Chrysler 300 C RS Custom готовы к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля и идеально подходит для вашего автомобиля. ▪ Для установки электронного продукта рекомендуется поручить его установку специалисту. Электрическое подключение 12 Вт, для освещения двери. ▪ Точность измерения, лазерная резка RS Custom для идеальной подгонки.  ▪ Превратите свой автомобиль в роскошный и уникальный автомобиль. Надпись: стандартная марка автомобиля или нестандартная надпись за дополнительную плату в размере 30 долларов США.   ⚠ Я нструкц и я  ① Поместите крышку RS Custom на поверхность перед постоянной фиксацией, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярной ленты (при необходимости).  ② Очистите поверхность, на которой будет установлен порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты.  ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключитесь к блоку питания мощностью 12 Вт. для освещения дверей. Мы надеемся, что наш продукт вам понравится! -Обязательно проверьте соответствие некоторых предметов на фотографиях цветов в интерьере/экстерьере вашего автомобиля. - Мы стараемся фотографировать при разном освещении, чтобы вы имели представление о том, как будет выглядеть наш товар.  -Ваш продукт RS Custom будет выглядеть иначе на солнце, чем в помещении.  - Вот что делает нашу продукцию такой красивой и уникальной!

Led door sills Lexus RX IV 2015+ RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Lexus RX IV 2015+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Dodge Durango III 2011+ with logo SRT RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Dodge Durango III 2011+ with logo SRT with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).  ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Door sills Porsche Macan 2014-2018 Custom. The material is plastic. Includes 4 pads. Macan inscription. Porsche logo. Mounting on adhesive tape type 3m. Delivery worldwide.

Car led door sills Ford Fusion USA 2012+ with logo Fusion Ford Fusion USA 2012+  with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Inserts in regular plastic thresholds of the car BMW E61 Material plastic. Inscription ///M.  Includes 4 pads. Installation in standard plastic thresholds of the car.  Custom.  Delivery worldwide.