Led door sills Mazda CX-3 2015+ Mazda CX-3 2015+ with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Mazda CX-3 2015+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes  ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Toyota Camry V70 2018+ LED Door Sill Plates with TRD Logo Toyota Camry V70 2018+ Stainless Steel TRD Logo 4-Pack RS Custom steel door sill plates are ready to be installed by an electronics professional and will individually update the look of your interior. This laser cut is 100% accurate for your car and will perfectly fit your car. ▪ Fits all: Toyota Camry V70 2018+ Stainless Steel TRD Logo 4-Pack ▪ 100% Stainless Steel (Polished). ▪ For the installation of the electronic product, we recommend that it be installed by a professional. Connect to 12W power supply, to the door lighting. ▪ Accuracy in measurement, RS Custom laser cut design ensures a perfect fit. ▪ Transform your car into a personalized luxury and unique car. Lettering: Standard car brand or with custom lettering for an extra $30. ⚠ Instructions ① Place the RS Custom door sill on the surface before permanently attaching it to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the RS Custom door sill will be installed from dust/dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially on the edges, for 30 seconds. Connect to 12W power to the door light. We hope you like our product! -Please be sure to check if some of the items in the product photos match the interior/exterior of your car. - We do our best to take photos in different lighting conditions so that you have an idea of how our product will look. - Your RS Custom product will look different in sunlight than it does indoors. - This is what makes our products so beautiful and unique!

Led door sills Toyota Auris II 2013+. 2 pieces Toyota Auris II 2013+ with AURIS lettering in stainless steel, 2 pieces in a set. RS Custom steel door sills are ready to be installed by an electronics specialist and will individually update the look of your interior. This laser cut is 100% accurate for your car and perfectly matches your car. ▪ Suitable for all: Toyota Auris II 2013+ with stainless steel in a set of 2 pieces. ▪ 100% stainless steel (polished). ▪ For the installation of an electronic product, we recommend that it be installed by a specialist. Connect to a 12W power supply, to the door lighting. ▪ Accuracy in measurement, RS Custom laser cut design ensures a perfect fit. ▪ Transform your car into a personalized luxury and unique car. Lettering: Standard car brand or with custom lettering for an extra $30. ⚠ Instructions ① Place the RS Custom door sill on the surface before permanently attaching it to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the RS Custom door sill will be installed from dust/dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially on the edges, for 30 seconds. Connect to 12W power to the door light. We hope you like our product! -Please check if some of the items in the product photos exactly match the interior/exterior of your car.- We do our best to photograph different lighting conditions to give you an idea of how our product will look. Your RS Custom product will look different in sunlight than it does indoors. This is what makes our products so beautiful and unique!

Led door sills Toyota Land Cruiser 200 2008+ 2 pieces Toyota Land Cruiser 200 2008+ inscription LAND CRUISER with stainless steel includes 2 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪  Suitable for everyone: Toyota Land Cruiser 200 2008+ with stainless steel includes 2 pieces. ▪  100% stainless steel (polished).  ▪  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪  Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠  I n s t r u k c and I ① Place the RSCastom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Car led door sills Toyota Tundra 2 2007-2013 2 pieces Toyota Tundra 2 2007-2013 inscription TUNDARA with stainless steel includes 2 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪  Suitable for everyone: Toyota Tundra 2 2007-2013 with stainless steel includes 2 pieces. ▪  100% stainless steel (polished).  ▪  To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪  Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪  Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠  I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.  We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Led door sills Toyota Sequoia 2007-2021 2 pieces

Led door sills Volkswagen Touareg III 2018+ inscription Touareg. Volkswagen Touareg III 2018+with stainless steel includes 4 pieces. RS Custom steel running boards are ready for installation by electronics and a custom upgrade of your interior. This laser cut is 100% exactly suitable for your car, perfectly suited to your car. ▪ Adaptation for all: Volkswagen Touareg III 2018+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ It is recommended to have the product installed by a specialist for installation. Connection to the 12W power supply, to the door lighting. ▪ Measurement accuracy, RS Custom laser cutting ensures a perfect fit. ▪ Transform your car into a custom application. Lettering: Standard car brand or with custom lettering with an extra charge of $ 23. ⚠ I am nstrukc and I ① Place the RS Custom cover on the surface before random mounting to get an idea of how it will look after installation. Relatively final place for a piece of masking tape (if necessary). ② Clean the surface where the RS Custom door sill will be felt from dust / dirt and wax. Let it dry completely. Remove the adhesive tape. ③ Continue pressing, especially on the edges, for 30 seconds. Connect to a 12 W power source. to the door lights. We expect you to like our product! - Be sure to check, check the elements of the photos, interior / exterior of your car. - We can take pictures in Canada, Australia, Australia to give you an idea ofhow our product will look. Your RS Custom product looks different in the sun than it will in the salon. That's what makes our products, beautiful and beautiful!

Car led door sills Ford Fusion Energi includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Audi A4 B8 2008-2015 includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting.  ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Stainless Steel Door Sill Scuff Plates Ford Fusion Energi 2015-2021 4 Scuff Plates. Ford Fusion Energi 2015-2021 includes 4 Scuff Plates for the front doors of the car. RS Custom Steel Steps are ready to be installed by an electronics specialist and customize your interior. This laser cut is 100% accurate for your car, perfect for your car. ▪ Fits all: Ford Fusion Energi 2015-2021 includes 4 pieces. ▪ 100% Stainless Steel (Polished). ▪ Accuracy in measurement, RS Custom laser cut ensures a perfect fit. ▪ Transform your car into a customized luxury and unique car. Lettering: Standard car brand or with a custom lettering with an extra charge of $ 30. ⚠ I am nstrukc and I ① Place the RS Custom door sill on the surface before permanent installation to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface where the RS Custom door sill will be installed from dust/dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially on the edges, for 30 seconds. Connect to a 12W power source. to the door lights. We hope you like our product! -Be sure to check if some of the elements in the product photos match the interior/exterior of your car. We try to take pictures in different lighting conditions to give you an idea of how our product will look. - Your RS Custom product will look different in the sun than indoors. That's what makes our products so beautiful and unique!

Led door sills Mitsubishi Outlander III 2012+ Includes 4 locks for the front doors of the car Mitsubishi Outlander III 2012+ with logo OUTLANDER with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon Mitsubishi Outlander III 2012+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors. -This is what makes our products so beautiful and unique!

Led door sills Opel Insignia I OPC 2008-2017 Includes 4 locks for the front doors of the car Opel Insignia I 2008-2017 with logo OPC with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon Opel Insignia OPC I 2008-2017 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors. -This is what makes our products so beautiful and unique!

Led door sills Opel Astra J 2009-2015 Includes 4 locks for the front doors of the car Opel Astra J 2009-2015 with logo ASTRA with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon Opel Astra J 2009-2015 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors. -This is what makes our products so beautiful and unique!

Led door sills Chevrolet Silverado III 2014-2019 Includes 4 locks for the front doors of the car Chevrolet Silverado III 2014-2019 with logo Silverado with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyon Chevrolet Silverado III 2014-2019 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished).  ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit  ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors. -This is what makes our products so beautiful and unique!

Door sills with illumination Nissan Patrol Y62 2010+ with logo NISMO with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone:Nissan Patrol Y62 2010+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist.Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).②  Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax.  Let it dry completely.  Remove the adhesive tapes.③ Continue pressing, especially at the edges, for 30 seconds.Connect to 12W power. to the door lighting.We hope you enjoy our product!-Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle.-  We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors.  This is what makes our products so beautiful and unique!

Door sills with illumination Mitsubishi Outlander Sport 2010+ with logo Outlander Sport with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Mitsubishi Outlander Sport 2010+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors. -This is what makes our products so beautiful and unique!

Led door sills with illumination Mitsubishi Outlander II 2007-2012 with logo Outlander XL Mitsubishi Outlander II 2007-2012 XL with stainless steel includes 4 pieces.RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone:Mitsubishi Outlander II 2007-2012 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist.Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary).② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes.③ Continue pressing, especially at the edges, for 30 seconds.Connect to 12W power. to the door lighting.We hope you enjoy our product!-Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle We do our best to photograph different lighting conditions to give you an idea of what our product will look like. Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!

Накладки на пороги с подсветкой для  Ford Mondeo IV 2007-2012  Ford Mondeo IV 2007-2012 с нержавейкой включает 2 штуки. Стальные подножки RSCastom готовы к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля, идеально подходит для вашего автомобиля. ▪ Подходит для всех:  Ford Mondeo IV 2007-2012 с нержавейкой включает 2 штуки. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта рекомендуется установить его специалистом. Подключение к электросети 12 Вт, к подсветке дверей. ▪ Точность измерения, лазерная резка RS Castom обеспечивает идеальную посадку. ▪ Превратите свой автомобиль в индивидуальное приложение. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я nstrukc и я ① Поместите крышку RSCastom на поверхность перед случайным креплением, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярного скотча (при необходимости). ② Очистите поверхность, на которой будет ощущаться дверной порог RSCastom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключить к источнику питания 12 Вт. к подсветке дверей. Мы ожидаем, что вам понравится наш продукт! -Обязательно проверьте, проверьте ли элементы на фотографии, интерьеру/экстерьеру вашего автомобиля. - Мы можем фотографировать в разных странах Австралии, чтобы дать вам представление о том, как будет выглядеть наш продукт. - Ваш продукт RSCastom иначе выглядит на солнце, чем будет в салоне. -Вот что делает наша продукция, красивую и красивую!

Led door sills Toyota Tacoma III 2016 Toyota Tacoma III 2016 includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Toyota Tacoma III 2016 includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Custom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. - We do our best to photograph different lighting conditions to give you an idea of what our product will look like. - Your RS Custom product will look different in sunlight than indoors.  -This is what makes our products so beautiful and unique!

Ilumination н акладки на пороги с подсветкой для Toyota Land Cruiser 200 2008+ Toyota Land Cruiser 200 2008+  с нержавейкой включает 4 штуки. Стальные подножки RSCastom готовы к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля, идеально подходит для вашего автомобиля. ▪ Подходит для всех: Toyota Land Cruiser 200 2008+  с нержавейкой включает 4 штуки. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта рекомендуется установить его специалистом. Подключение к электросети 12 Вт, к подсветке дверей. ▪ Точность измерения, лазерная резка RS Castom обеспечивает идеальную посадку. ▪ Превратите свой автомобиль в индивидуальное приложение. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я nstrukc и я ① Поместите крышку RSCastom на поверхность перед случайным креплением, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярного скотча (при необходимости). ② Очистите поверхность, на которой будет ощущаться дверной порог RSCastom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключить к источнику питания 12 Вт. к подсветке дверей. Мы ожидаем, что вам понравится наш продукт! -Обязательно проверьте, проверьте ли элементы на фотографии, интерьеру/экстерьеру вашего автомобиля. - Мы можем фотографировать в разных странах Австралии, чтобы дать вам представление о том, как будет выглядеть наш продукт. - Ваш продукт RSCastom иначе выглядит на солнце, чем будет в салоне. -Вот что делает наша продукция, красивую и красивую!

Led door sill lights with panel for Volkswagen Touareg II 2010-2018 Volkswagen Touareg II 2010-2018 with stainless steel includes 4 pieces. RS Custom steel running boards are ready for installation by electronics and a custom upgrade of your interior. This laser cut is 100% exactly suitable for your car, perfectly suited to your car. ▪ Adaptation for all: Volkswagen Touareg II 2010-2018 with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ It is recommended to have the product installed by a specialist for installation. Connection to the 12W power supply, to the door lighting. ▪ Measurement accuracy, RS Custom laser cutting ensures a perfect fit. ▪ Transform your car into a custom application. Lettering: Standard car brand or with custom lettering with an extra charge of $ 30. ⚠ I am nstrukc and I ① Place the RS Custom cover on the surface before random mounting to get an idea of how it will look after installation. Relatively final place for a piece of masking tape (if necessary). ② Clean the surface where the RS Custom door sill will be felt from dust / dirt and wax. Let it dry completely. Remove the adhesive tape. ③ Continue pressing, especially on the edges, for 30 seconds. Connect to a 12W power source. to the door lights. We expect you to like our product! Be sure to check, check the elements of the photos, interior / exterior of your car. - We can take pictures in Canada, Australia, Australia to give you an idea of how our product will look. Your RS Custom product looks different in the sun than it will in the salon. That's what makes our products, beautiful and beautiful!.

Подсветка на накладки на пороги с панелью для LEXUS ES 7 2018+ LEXUS ES 7 2018+  с нержавейкой включает 4 штуки. Стальные подножки RSCastom готовы к установке по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точно подходит для вашего автомобиля, идеально подходит для вашего автомобиля. ▪ Адаптация для всех: LEXUS ES 7 2018+  с нержавейкой включает 4 штуки. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки продукта рекомендуется установить его специалистом. Подключение к электросети 12 Вт, к подсветке дверей. ▪ Точность измерения, лазерная резка RS Castom обеспечивает идеальную посадку. ▪ Превратите свой автомобиль в индивидуальное приложение. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 30$. ⚠ Я nstrukc и я ① Поместите крышку RSCastom на поверхность перед случайным креплением, чтобы получить представление о том, как она будет выглядеть после установки. Относительно конечное место для кусочка малярного скотча (при необходимости). ② Очистите поверхность, на которой будет ощущаться дверной порог RSCastom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкую ленту. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключите к источнику питания 12 Вт. к подсветке дверей. Мы ожидаем, что наш продукт вам понравится! -Обязательно проверьте, проверьте элементы фотографий, интерьера/экстерьера вашего автомобиля. - Мы можем сфотографировать в Канаде, Австралии, Австралии, чтобы дать вам представление о том, как будет выглядеть наш продукт. - Ваш продукт RSCastom иначе выглядит на солнце, чем будет в салоне. -Вот что делает наша продукция,красивую и красивую!

Ilumination н акладки на пороги с подсветкой для LEXUS GX 470 2002-2009 LEXUS GX 470 2002-2009  с нержавейкой включает 2 штуки. Стальные подножки RSCastom готовы к установке специалистом по электронике и индивидуальному обновлению вашего интерьера. Эта лазерная резка на 100% точна для вашего автомобиля, идеально подходит для вашего автомобиля. ▪ Подходит для всех: LEXUS GX 470 2002-2009  с нержавейкой включает 2 штуки. ▪ 100% нержавеющая сталь (полированная). ▪ Для установки электронного продукта рекомендуется установить его специалистом. Подключение к электросети 12 Вт, к подсветке дверей. ▪ Точность измерения, лазерная резка RS Castom обеспечивает идеальную посадку. ▪ Превратите свой автомобиль в индивидуальное приложение. Надпись: Стандартная марка автомобиля или с индивидуальной надписью с доплатой 23$. ⚠ Я nstrukc и я ① Поместите крышку RS Custom на поверхность перед случайным креплением, чтобы получить представление о том, как она будет выглядеть после установки. Отметьте конечное место кусочком малярного скотча (при необходимости). ② Очистите поверхность, на которой будет ощущаться дверной порог RS Custom, от пыли/грязи и воска. Дайте ему полностью высохнуть. Удалите клейкие ленты. ③ Продолжайте нажимать, особенно по краям, в течение 30 секунд. Подключить к источнику питания 12 Вт. к подсветке дверей. Мы ожидаем, что вам понравится наш продукт! -Обязательно проверьте, проверьте ли элементы на фотографии, интерьеру/экстерьеру вашего автомобиля. - Мы можем фотографировать в разных странах Австралии, чтобы дать вам представление о том, как будет выглядеть наш продукт. - Ваш продукт RS Custom иначе выглядит на солнце, чем будет в салоне. -Вот что делает наша продукция, красивую и красивую!

Car protector led door sills Lexus NX 2014+ set of 4 pcs. Custom RS steel running boards are ready to be installed by an electronics specialist to customize your interior. This laser cutting is 100% accurate to your car, perfect fit for your car. ▪ 100% stainless steel (polished). ▪ To install an electronic product, it is recommended that it be installed by a professional. Connection to 12 W power supply, to door lighting. ▪ Precise measurements, laser cut RS Custom ensures a perfect fit  ▪Transform your car into a customized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $23. ⚠ I am nstrukc and I① Place the RS Custom cover on the surface before permanently attaching it to get an idea of how it will look after installation. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door threshold will be installed from dust/dirt and wax. Let it dry completely. Remove adhesive tapes. ③ Continue pressing, especially around the edges, for 30 seconds. Connect to a 12 W power source. to door lighting. We hope you enjoy our product! - Be sure to check if some of the items in the product photos match the interior/exterior of your vehicle. - We try to take photos in different lighting to give you an idea of what our product will look like. - Your RS Custom product will look different in the sun than indoors. - That's what makes our products so beautiful and unique!

Led door sills Lexus RX IV 2015+ Lexus RX IV 2015+ with stainless steel includes 4 pieces. RS Custom Steel Running Boards are ready to be installed by an electronics specialist and custom update your interior look. This laser cut is 100% accurate for your car, perfect for your car. ▪ Suitable for everyone: Lexus RX IV 2015+ with stainless steel includes 4 pieces. ▪ 100% stainless steel (polished). ▪ To install an electronic product, we recommend installing it by a specialist. Connection to power supply 12 W., to the door lighting. ▪ Measuring accuracy, RS Castom laser cut design ensures perfect fit ▪ Change your vehicle to a personalized luxury and unique vehicle. Inscription: Standard car brand or with an individual inscription with a surcharge of $ 30. ⚠ I n s t r u k c and I ① Place the RS Custom cover on the surface before permanently attaching to get an idea of how it will look after being installed. Mark the final location with a piece of masking tape (if necessary). ② Clean the surface on which the RS Custom door sill will be installed to remove dust / dirt and wax. Let it dry completely. Remove the adhesive tapes. ③ Continue pressing, especially at the edges, for 30 seconds. Connect to 12W power. to the door lighting. We hope you enjoy our product! -Be sure to check if some of the items in the product photos exactly match the interior / exterior of your vehicle. We do our best to photograph different lighting conditions to give you an idea of what our product will look like.  Your RS Custom product will look different in sunlight than indoors. This is what makes our products so beautiful and unique!