Games & DIY Kits

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for FOX Float 38 NA2 fork air spring - upgraded & improved   Compatibility with Fox Float 38 NA2 fork air spring   Covers all production years of Fox Float 38 NA2 fork air spring models – so it may include some extra seals that are not required for your shock.   Include schrader valve core rated for 800 PSI (stock valve core with red seal rated for 350 PSI)   Include upgraded U-cup shaft seal  Inc ude  best suspension grease -   Slickoleum Friction Reducing   Grease  4oz (114g)  You can order this seal kit without g rease  here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Make paper Elephan with your own hands. All you need is download a template, print, cut the paper and glue the pieces After purchase you get a template and assembly guid in PDF.Just follow the step by step instructions.You will need colored paper (160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration.SVG + DXF(per sheet) included. ---Specifications--- Sheets amount: 15 (A4) Size: Height:380mm Width:230mm Depth:217mm ---Files for download--- Elephant_Template.pdf Elephant_Assembly_guide.pdf Elephant.svg Elephant_dxf.zip -Customer support

Bike Yoke Revive O-Ring Kit #1

Set contains resin and photoetched parts for exterior detailing. " The An-225 Mrija (NATO: "Cossack") - a strategic airlift cargo aircraft, designed by the Antonov Design Bureau. Produced: 1985 - present. Operators: Ukraine. " DETAILS: Type: Aircraft Scale: 1/144 Products: Resin, photoetch Manufacturer: Metallic Details Recommended for kit: Revell

Set contains parts for detailing the interior and exterior of the aircraft. Set contains photoetched details, painting masks for the cockpit canopy, color film for the dashboard. "The Mikoyan MiG-29 (NATO: Fulcrum) - a twin-engine jet fighter aircraft designed in the Soviet Union. Produced: 1981 – present. Operators: Algeria, Azerbaijan, Bangladesh, Belarus, Bulgaria, Chad, Czech Republic, Eritrea, Germany, Hungary, India, Israel, Kazakhstan, Malaysia, Moldova, Myanmar, Peru, Poland, Romania, Russia, Serbia, Slovakia, Turkmenistan, Ukraine, United States, Uzbekistan, Yugoslavia." DETAILS: Type:  Aircraft Scale:  1/72 Products:  Photoetch Manufacturer:  Metallic Details Recommended for kit:  Zvezda

Set contains 11 resin parts for detailing of engine nozzles. "The Mikoyan-Gurevich MiG-25 (NATO: Foxbat) - a supersonic interceptor and reconnaissance aircraft. MiG-25PD (NATO: Foxbat-E) - an improved single-seat all-weather interceptor fighter aircraft, fitted with R-15BD-300 engines and new N-005 Saphir-25 (RP-25M) Pulse-Doppler radar with look-down/shoot down capability (from 1979). Produced: 1964-1984. Operators: Algeria, Armenia, Bulgaria, Belarus, India, Georgia, Kazakhstan, Libya, Russia, Turkmenistan, Ukraine." DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details Recommended for kit:  ICM

Kit contains resin and photoetched parts for assembly of U.S. Navy torpedo loading cart and 1 torpedo Mk-46. "The Mark 46 torpedo is lightweight aerial anti-submarine warfare torpedo. Produced: 1979 - present. Operators: Australia, Belgium, Brazil, Canada, Chile, Ecuador, Egypt, France, Germany, Greece, Indonesia, Israel, Italy, Japan, Kuwait, Mexico, Morocco, Netherlands, New Zealand, Norway, Peru, Philippines, Portugal, Saudi Arabia, South Korea, Spain, Taiwan, Thailand, Turkey, United Arab Emirates, United Kingdom, United States. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin, photoetch Manufacturer:  Metallic Details 

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal kit for SR Suntour TriAir damper and air can - upgraded & improved  Compatibility with SR Suntour TriAir 3CR, 2CR, R and TriAir2 3CR, 2CR, R air shocks  Covers both parts - air can and damper seals  Covers all production years of  SR Suntour TriAir 3CR, 2CR, R and TriAir2 3CR, 2CR, R  models - so it may include some extra seals that are not required for your shock.  Include s chrader  valve cores rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)   4 main PTFE backup rings included - 2 for air can and 2 for air piston  You can order set of this seal kit and  4oz (114g)  Slickoleum Friction Reducing Grease  here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Items On Sale Seller Profile Contact seller FAST Shipping - usually about 5-10 business days to any part of the world Cane Creek DB Kitsuma Air rear shock 210*52.5 DB Kitsuma is a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Cane Creek authorized  dealer -  limited one (1) year warranty included PRO-TUNE   AT YOUR FINGERTIPS We are proud to announce the DB Kitsuma, a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Grounded in the DNA of the original Double Barrel line of shocks, DB Kitsuma improves on its predecessors in almost every way. It caters to all varieties of riding styles, body types, and bicycle frame designs without the need for any internal valving adjustments, changes or compromises. A Better Shock for More Bikes Redesigned with the geometry of modern bikes in mind, DB Kitsuma’s new valve body and tapered air-can cuts 16mm of length off the external reservoir and reduces the air can’s outer diameter at the end-eye.  All-in-all, this adds up to a new low-profile design which allows DB Kitsuma to fit more bikes free of frame-clearance issues. SIMPLE YET EFFECTIVE DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains Double Barrel’s “Descend” mode it’s patented “CS” mode which provides a stable, yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. TUNED FOR TODAY’S (AND TOMORROW’S) BIKES DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. These changes combine to allow the DB Kitsuma to provide peak performance on a wider range of bikes. DB KITSUMA Like all Cane Creek Suspension, DB Kitsuma is designed, developed and hand-built by riders in Western North Carolina. Informed by the endless climbs and technical descents of the Pisgah National Forest the DB Kitsuma was born from the experience of the hardcore riders who call Cane Creek home. This shock was developed completely in-house by Cane Creek’s engineering team and rigorously tested on some of North America’s most legendary trails. The name DB Kitsuma honors both the heritage of the original Double Barrel (DB) shock and the legendary Kitsuma trail that lies just a short drive northeast of Cane Creek’s Headquarters. With a grueling climb that combines a mix of road and technical singletrack followed by a grin-inducing two-mile ridgeline decent, the Kitsuma trail highlights some of the best riding that Western North Carolina has to offer and showcases the versatility and performance of the new DB Kitsuma shock. “At Cane Creek, we will only develop a product if we believe it truly adds something to cycling. With DB Kitsuma, we know we’ve done that,” said Brent Graves, president and CEO of Cane Creek. “From the fact that you no longer need to fumble with tools to tune your shock, to the increased damping and rebound range allowing for more bikes and more types of riders, to the various small improvements that add up to significant gains in performance – it all comes together to make what we think is a big step forward in mountain bike suspension.” Wider Range of Adjustment DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. See and Feel What Your Settings Are The entire range of DB Kitsuma’s low-speed compression and rebound circuits are controlled within a single rotation, while the high-speed circuits are controlled within two rotations, allowing the rider to easily reference where they are within their adjustment at a glance.  DB Kitsuma simplifies the tuning process by increasing the range of adjustment while reducing the number of external positions in each circuit – making each position more meaningful and discernible on the trail. Tool-Free Adjustment  No need to crane your neck under your bike while fumbling with tiny allen wrenches to make adjustments. DB Kitsuma sports completely tool-free adjusters that are ergonomically designed to be easily accessible and adjustable trail-side – giving riders the power of a pro-tune at their fingertips. Three Position Climb Switch DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains the “Descend” mode and patented “CS” mode which provides a stable yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. Additional information Weight 585g (Kitsuma Air 210mm) Damper Twin Tube independent compression and rebound  damping circuits.  Motorex 4wt Damper Oil. Adjustments High speed compression, Low speed compression, High speed rebound, Low speed rebound Shaft Diameter 9.5mm Suspension Tools Service seal kits MTB Shocks

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Items On Sale Seller Profile Contact seller FAST Shipping - usually about 5-10 business days to any part of the world Cane Creek DB Kitsuma Coil rear shock 230*62.5  DB Kitsuma is a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Cane Creek authorized  dealer -  limited one (1) year warranty included PRO-TUNE   AT YOUR FINGERTIPS We are proud to announce the DB Kitsuma, a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Grounded in the DNA of the original Double Barrel line of shocks, DB Kitsuma improves on its predecessors in almost every way. It caters to all varieties of riding styles, body types, and bicycle frame designs without the need for any internal valving adjustments, changes or compromises. A Better Shock for More Bikes Redesigned with the geometry of modern bikes in mind, DB Kitsuma’s new valve body and tapered air-can cuts 16mm of length off the external reservoir and reduces the air can’s outer diameter at the end-eye.  All-in-all, this adds up to a new low-profile design which allows DB Kitsuma to fit more bikes free of frame-clearance issues. SIMPLE YET EFFECTIVE DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains Double Barrel’s “Descend” mode it’s patented “CS” mode which provides a stable, yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. TUNED FOR TODAY’S (AND TOMORROW’S) BIKES DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. These changes combine to allow the DB Kitsuma to provide peak performance on a wider range of bikes. DB KITSUMA Like all Cane Creek Suspension, DB Kitsuma is designed, developed and hand-built by riders in Western North Carolina. Informed by the endless climbs and technical descents of the Pisgah National Forest the DB Kitsuma was born from the experience of the hardcore riders who call Cane Creek home. This shock was developed completely in-house by Cane Creek’s engineering team and rigorously tested on some of North America’s most legendary trails. The name DB Kitsuma honors both the heritage of the original Double Barrel (DB) shock and the legendary Kitsuma trail that lies just a short drive northeast of Cane Creek’s Headquarters. With a grueling climb that combines a mix of road and technical singletrack followed by a grin-inducing two-mile ridgeline decent, the Kitsuma trail highlights some of the best riding that Western North Carolina has to offer and showcases the versatility and performance of the new DB Kitsuma shock. “At Cane Creek, we will only develop a product if we believe it truly adds something to cycling. With DB Kitsuma, we know we’ve done that,” said Brent Graves, president and CEO of Cane Creek. “From the fact that you no longer need to fumble with tools to tune your shock, to the increased damping and rebound range allowing for more bikes and more types of riders, to the various small improvements that add up to significant gains in performance – it all comes together to make what we think is a big step forward in mountain bike suspension.” Wider Range of Adjustment DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. See and Feel What Your Settings Are The entire range of DB Kitsuma’s low-speed compression and rebound circuits are controlled within a single rotation, while the high-speed circuits are controlled within two rotations, allowing the rider to easily reference where they are within their adjustment at a glance.  DB Kitsuma simplifies the tuning process by increasing the range of adjustment while reducing the number of external positions in each circuit – making each position more meaningful and discernible on the trail. Tool-Free Adjustment  No need to crane your neck under your bike while fumbling with tiny allen wrenches to make adjustments. DB Kitsuma sports completely tool-free adjusters that are ergonomically designed to be easily accessible and adjustable trail-side – giving riders the power of a pro-tune at their fingertips. Three Position Climb Switch DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains the “Descend” mode and patented “CS” mode which provides a stable yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. Additional information Weight 417g (DB Coil 210mm w/o spring) Damper Twin Tube independent compression and rebound  damping circuits.  Motorex 4wt Damper Oil. Adjustments High speed compression, Low speed compression, High speed rebound, Low speed rebound Shaft Diameter 9.5mm Suspension Tools Service seal kits MTB Shocks

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for Fox Float DHX damper and air can - upgraded & improved  Compatibility with Fox Float DHX air shocks  Covers both parts - air can and damper seals  Covers all production years of  Fox Float DHX  3.0, 4.0 and 5.0 models - so it may include some extra seals that are not required for your shock.  Include s chrader  valve cores rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)   Upgraded nitrogen chamber plug does not require hex tool. Now you need only the needle tool to fill the nitrogen chamber.  Inc ude  best suspension grease -   Slickoleum Friction Reducing   Grease  4oz (114g)   4 main PTFE backup rings included - 2 for air can and 2 for air piston  You  can order this seal kit without g rease   here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Set contains 3 photoetching boards (more than 90 parts) for detailing the exterior of the aircraft. "The Airbus A380 - a double-deck, wide-body, four-engine jet airliner, manufactured by Airbus. Produced: 2005 – present. Operators: Australia, China, France, Germany, Malaysia, Qatar, Singapore, South Korea, Thailand, United Arab Emirates, United Kingdom." DETAILS: Type: Aircraft Scale: 1/144 Products: Photoetch Manufacturer: Metallic Details Recommended for kit: Revell

Set contains 2 photoetching boards (29*71 and 17*37 mm) for detailing the exterior of the aircraft. "The Airbus A350 - a long-range, twin-engine wide-body jet airliner, manufactured by Airbus. Produced: 2010 – present. Operators: Australia, Brazil, China, Finland, France, Germany, Malaysia, Qatar, Singapore, South Korea, Thailand, United Arab Emirates, United Kingdom, United States." DETAILS: Type: Aircraft Scale: 1/144 Products: Photoetch Manufacturer: Metallic Details Recommended for kit: Revell

Set contents: 4 x Engine Pratt & Whitney R-1830 Twin Wasp; 4 x Supercharger. Number of parts - 148. "The B-24 Liberator - an American heavy bomber, designed by Consolidated Aircraft. Produced: 1940–1945. Operators: Australia, Canada, China, Czechoslovakia, Germany, India, Italy, Nicaragua, Netherlands, New Zealand, Poland, Portugal, Romania, Soviet Union, South Africa, Turkey, United Kingdom, United States." DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details  Recommended for kit:  Revell/Monogram 

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite Neo Breeze BRS-762MH 2.26m 10-45g Ex.Fast Favorite Neo Breeze BRS-862L 2.58m 4-18g Ex.Fast Favorite Neo Breeze BRS-862M 2.58m 7-35g Ex.Fast Favorite Neo Breeze BRS-862MH 2.58m 15-50g Ex.Fast Favorite Neo Breeze BRS-862ML 2.58m 5-28g Ex.Fast Favorite Neo Breeze BRS-902MH 2.7m 15-45g Ex.Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Neo Breeze Fishing Rod - This updated version has already become popular with TM Favorite Fishing Breeze Fishing Rods. Neo Breeze has a new handle and new Fuji K-type rings. This series of fishing rods will be appreciated, first of all, by fans of jig fishing. The rods have a fast system, very light, solid and sensitive form, equipped with its corresponding accessories. Not only will Breeze give the highest sensitivity that will make the rod feel like a continuation of the nervous system, but it will also allow you to perform complex aerobatics in the field of jigsaw animation. These are top-class fishing rods, with all the main parameters far ahead of their counterparts in their price category. In the development of these fishing rods, the requirements that our fishermen make to the gear, taking into account the local fishing conditions, were taken into account. That is, the owner of the Breeze does not have to adjust the fishing gear for bass fishing for walleye - the fishing rod was initially designed to catch our fish. These sophisticated, delicate fishing rods have a solid amount of power that can handle even large specimens of predatory fish. Convenient spaced handle (in general, this grasshopper Favorite rods) significantly increases the comfort of fishing. In addition to jig fishing, these fishing rods are great for tweeting wobblers. Manufacturer: Favorite Model: Neo Breeze Fishing Rod Type: Spinning Rod Length, m: 2.58 Test, d: 4-18 Test, lb: 6-12 Mass, g: 116 Number of sections: 2 Transport length, cm: 132 Lad: Ex-Fast Sleeve (Material): Cork Rings (Material): Fuji K-Guides Alconite Fishing Rod Class: Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

In the presence there are such models. Before buying, specify which model you want to buy Favorite Arena Stream ARNS-662UL 1.98m 3-10g 3-6lb Mod-Fas fishing spinning rod  Favorite Arena Stream ARNS-602UL 1.8m 2-7g 2-5lb Mod-Fast  fishing spinning rod  Favorite Arena Stream ARNS-562SUL 1.68m 1-5g 1-4lb Mod-Fast  fishing spinning rod  Favorite Arena Stream ARNC-602UL 1.8m 2-7g 2-5lb Mod-Fast casting Video review of the S pinning  Rod  Favorite Arena &  Favorite  Arena Stream  Video Favorite Arena & Favorite Arena Stream  > Video Favorite Arena & Favorite Arena Stream  > DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite Arena Stream is a new model that expands the series of ultralight Arena rods, so that each angler can pick up a tackle to his liking. The main difference from the basic model is the faster form, which gives some advantages in the fishing process. Firstly, it is an opportunity to carry out more sharp and biting casts, which allow sending a small bait for a decent distance even against the wind. Secondly, the accuracy of casting is significantly increased, which is of great importance when fishing in restricted conditions on overgrown ponds or under hanging trees. Also, the more rigid spinning form Arena Stream allows you to produce delicate wiring, including jerky, and clearly feel the biting of cautious fish. In addition to all, the rod has more power and a significant deterrent effect, which manifests itself during the fight with a large fish or when it is necessary to speed up the survival. The classic design of the rods is completely in line with the Arena series - a thin, delicate blank with lightweight through-rings, equipped with a cork handle with a metal reel seat and wooden inserts make it look very recognizable. Separately it is worth noting that in the transmission rings the most modern inserts are used, which are more durable, smooth and light, and also have a larger throughput diameter than the classical rings. Favorite Arena Stream spinning can be safely attributed to universal rods, as it makes it possible to catch all types of lure equally comfortably, and its scope is not limited to trout ponds, it is ideal for ultralight fishing on small rivers and in the coastal zone of large reservoirs. Manufacturer: Favorite Model: Arena Stream Rod type: Spinning Length, m: 1.80 Test, g: 2-7 Test, lb: 2-5 Weight, g: 94 Number of sections: 2 Shipping length, cm: 94.5 Story: Moderate Fast Handle (material): Cork Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Reinforced Transom Mount Bracket  for Lowrance or Simrad SS3d, SSHD, LSS2, Total scan, Active Imagine 3 in 1 transducers  MPN: 000-12603-001.  This is a 2mm. thick stainless steel reinforced bracket.  This makes it stronger and reduces vibration at high speeds. This bracket is suitable for these models of transducers: - SS3d - LSS 2 - Totalscan - Active Imagine 2in1 and AI 3in1 The kit contains everything you need for installation. Please see photos. This bracket is made using a wide experience in the manufacture of stainless steel products, as well as many years of use of fish-finders. Shipping to USA from Ukraine - 8-10 business days by UPS and is free for buyers.  During the period of epidemics and unrest, the period increases to 10-15 business days to USA, up to 21 business days around the world. If you have any questions, please don't hesitate.

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for Manitou Mara Pro damper and air can - upgraded & improved   Compatibility with  Manitou  Mara Pro  air shocks   Covers both parts – air can and damper seals   Covers all production years of  Manitou  Mara Pro  models - so it may include some extra seals that are not required for your shock.  Backup Rings  NOT included  - you can reuse them  many times    IFP NOT included – you can reuse it many times  Include s chrader  valve core rated for  800 PSI    Cover both air can - standard and Dual/King  I ncude best suspension grease - Slickoleum Friction Reducing Grease 4oz (114g)   You  can order this seal kit without g rease   here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for Manitou Mara Pro damper and air can - upgraded & improved   Compatibility with  Manitou  Mara Pro air shocks   Covers both parts – air can and damper seals   Covers all production years of  Manitou  Mara Pro models - so it may include some extra seals that are not required for your shock.  Backup Rings  NOT included  - you can reuse them  many times    IFP NOT included – you can reuse it many times  Include s chrader  valve core rated for  800 PSI    Cover both air can - standard and Dual/King  You can order set of this seal kit and  4oz (114g)  Slickoleum Friction Reducing Grease  here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Items On Sale Seller Profile Contact seller FAST Shipping - usually about 5-10 business days to any part of the world Cane Creek DB Kitsuma Air rear shock 210*55 DB Kitsuma is a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Cane Creek authorized  dealer -  limited one (1) year warranty included PRO-TUNE   AT YOUR FINGERTIPS We are proud to announce the DB Kitsuma, a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Grounded in the DNA of the original Double Barrel line of shocks, DB Kitsuma improves on its predecessors in almost every way. It caters to all varieties of riding styles, body types, and bicycle frame designs without the need for any internal valving adjustments, changes or compromises. A Better Shock for More Bikes Redesigned with the geometry of modern bikes in mind, DB Kitsuma’s new valve body and tapered air-can cuts 16mm of length off the external reservoir and reduces the air can’s outer diameter at the end-eye.  All-in-all, this adds up to a new low-profile design which allows DB Kitsuma to fit more bikes free of frame-clearance issues. SIMPLE YET EFFECTIVE DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains Double Barrel’s “Descend” mode it’s patented “CS” mode which provides a stable, yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. TUNED FOR TODAY’S (AND TOMORROW’S) BIKES DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. These changes combine to allow the DB Kitsuma to provide peak performance on a wider range of bikes. DB KITSUMA Like all Cane Creek Suspension, DB Kitsuma is designed, developed and hand-built by riders in Western North Carolina. Informed by the endless climbs and technical descents of the Pisgah National Forest the DB Kitsuma was born from the experience of the hardcore riders who call Cane Creek home. This shock was developed completely in-house by Cane Creek’s engineering team and rigorously tested on some of North America’s most legendary trails. The name DB Kitsuma honors both the heritage of the original Double Barrel (DB) shock and the legendary Kitsuma trail that lies just a short drive northeast of Cane Creek’s Headquarters. With a grueling climb that combines a mix of road and technical singletrack followed by a grin-inducing two-mile ridgeline decent, the Kitsuma trail highlights some of the best riding that Western North Carolina has to offer and showcases the versatility and performance of the new DB Kitsuma shock. “At Cane Creek, we will only develop a product if we believe it truly adds something to cycling. With DB Kitsuma, we know we’ve done that,” said Brent Graves, president and CEO of Cane Creek. “From the fact that you no longer need to fumble with tools to tune your shock, to the increased damping and rebound range allowing for more bikes and more types of riders, to the various small improvements that add up to significant gains in performance – it all comes together to make what we think is a big step forward in mountain bike suspension.” Wider Range of Adjustment DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. See and Feel What Your Settings Are The entire range of DB Kitsuma’s low-speed compression and rebound circuits are controlled within a single rotation, while the high-speed circuits are controlled within two rotations, allowing the rider to easily reference where they are within their adjustment at a glance.  DB Kitsuma simplifies the tuning process by increasing the range of adjustment while reducing the number of external positions in each circuit – making each position more meaningful and discernible on the trail. Tool-Free Adjustment  No need to crane your neck under your bike while fumbling with tiny allen wrenches to make adjustments. DB Kitsuma sports completely tool-free adjusters that are ergonomically designed to be easily accessible and adjustable trail-side – giving riders the power of a pro-tune at their fingertips. Three Position Climb Switch DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains the “Descend” mode and patented “CS” mode which provides a stable yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. Additional information Weight 585g (Kitsuma Air 210mm) Damper Twin Tube independent compression and rebound  damping circuits.  Motorex 4wt Damper Oil. Adjustments High speed compression, Low speed compression, High speed rebound, Low speed rebound Shaft Diameter 9.5mm Suspension Tools Service seal kits MTB Shocks

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Items On Sale Seller Profile Contact seller FAST Shipping - usually about 5-10 business days to any part of the world Cane Creek DB Kitsuma Air Trunnion rear shock 205*60 DB Kitsuma is a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Cane Creek authorized  dealer -  limited one (1) year warranty included PRO-TUNE   AT YOUR FINGERTIPS We are proud to announce the DB Kitsuma, a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Grounded in the DNA of the original Double Barrel line of shocks, DB Kitsuma improves on its predecessors in almost every way. It caters to all varieties of riding styles, body types, and bicycle frame designs without the need for any internal valving adjustments, changes or compromises. A Better Shock for More Bikes Redesigned with the geometry of modern bikes in mind, DB Kitsuma’s new valve body and tapered air-can cuts 16mm of length off the external reservoir and reduces the air can’s outer diameter at the end-eye.  All-in-all, this adds up to a new low-profile design which allows DB Kitsuma to fit more bikes free of frame-clearance issues. SIMPLE YET EFFECTIVE DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains Double Barrel’s “Descend” mode it’s patented “CS” mode which provides a stable, yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. TUNED FOR TODAY’S (AND TOMORROW’S) BIKES DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. These changes combine to allow the DB Kitsuma to provide peak performance on a wider range of bikes. DB KITSUMA Like all Cane Creek Suspension, DB Kitsuma is designed, developed and hand-built by riders in Western North Carolina. Informed by the endless climbs and technical descents of the Pisgah National Forest the DB Kitsuma was born from the experience of the hardcore riders who call Cane Creek home. This shock was developed completely in-house by Cane Creek’s engineering team and rigorously tested on some of North America’s most legendary trails. The name DB Kitsuma honors both the heritage of the original Double Barrel (DB) shock and the legendary Kitsuma trail that lies just a short drive northeast of Cane Creek’s Headquarters. With a grueling climb that combines a mix of road and technical singletrack followed by a grin-inducing two-mile ridgeline decent, the Kitsuma trail highlights some of the best riding that Western North Carolina has to offer and showcases the versatility and performance of the new DB Kitsuma shock. “At Cane Creek, we will only develop a product if we believe it truly adds something to cycling. With DB Kitsuma, we know we’ve done that,” said Brent Graves, president and CEO of Cane Creek. “From the fact that you no longer need to fumble with tools to tune your shock, to the increased damping and rebound range allowing for more bikes and more types of riders, to the various small improvements that add up to significant gains in performance – it all comes together to make what we think is a big step forward in mountain bike suspension.” Wider Range of Adjustment DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. See and Feel What Your Settings Are The entire range of DB Kitsuma’s low-speed compression and rebound circuits are controlled within a single rotation, while the high-speed circuits are controlled within two rotations, allowing the rider to easily reference where they are within their adjustment at a glance.  DB Kitsuma simplifies the tuning process by increasing the range of adjustment while reducing the number of external positions in each circuit – making each position more meaningful and discernible on the trail. Tool-Free Adjustment  No need to crane your neck under your bike while fumbling with tiny allen wrenches to make adjustments. DB Kitsuma sports completely tool-free adjusters that are ergonomically designed to be easily accessible and adjustable trail-side – giving riders the power of a pro-tune at their fingertips. Three Position Climb Switch DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains the “Descend” mode and patented “CS” mode which provides a stable yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. Additional information Weight 585g (Kitsuma Air 210mm) Damper Twin Tube independent compression and rebound  damping circuits.  Motorex 4wt Damper Oil. Adjustments High speed compression, Low speed compression, High speed rebound, Low speed rebound Shaft Diameter 9.5mm Suspension Tools Service seal kits MTB Shocks

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Items On Sale Seller Profile Contact seller FAST Shipping - usually about 5-10 business days to any part of the world Cane Creek DB Kitsuma Coil rear shock 230*57.5  DB Kitsuma is a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Cane Creek authorized  dealer -  limited one (1) year warranty included PRO-TUNE   AT YOUR FINGERTIPS We are proud to announce the DB Kitsuma, a highly adjustable rear shock built for maximum performance in a design that is incredibly intuitive and easy to use. Grounded in the DNA of the original Double Barrel line of shocks, DB Kitsuma improves on its predecessors in almost every way. It caters to all varieties of riding styles, body types, and bicycle frame designs without the need for any internal valving adjustments, changes or compromises. A Better Shock for More Bikes Redesigned with the geometry of modern bikes in mind, DB Kitsuma’s new valve body and tapered air-can cuts 16mm of length off the external reservoir and reduces the air can’s outer diameter at the end-eye.  All-in-all, this adds up to a new low-profile design which allows DB Kitsuma to fit more bikes free of frame-clearance issues. SIMPLE YET EFFECTIVE DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains Double Barrel’s “Descend” mode it’s patented “CS” mode which provides a stable, yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. TUNED FOR TODAY’S (AND TOMORROW’S) BIKES DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. These changes combine to allow the DB Kitsuma to provide peak performance on a wider range of bikes. DB KITSUMA Like all Cane Creek Suspension, DB Kitsuma is designed, developed and hand-built by riders in Western North Carolina. Informed by the endless climbs and technical descents of the Pisgah National Forest the DB Kitsuma was born from the experience of the hardcore riders who call Cane Creek home. This shock was developed completely in-house by Cane Creek’s engineering team and rigorously tested on some of North America’s most legendary trails. The name DB Kitsuma honors both the heritage of the original Double Barrel (DB) shock and the legendary Kitsuma trail that lies just a short drive northeast of Cane Creek’s Headquarters. With a grueling climb that combines a mix of road and technical singletrack followed by a grin-inducing two-mile ridgeline decent, the Kitsuma trail highlights some of the best riding that Western North Carolina has to offer and showcases the versatility and performance of the new DB Kitsuma shock. “At Cane Creek, we will only develop a product if we believe it truly adds something to cycling. With DB Kitsuma, we know we’ve done that,” said Brent Graves, president and CEO of Cane Creek. “From the fact that you no longer need to fumble with tools to tune your shock, to the increased damping and rebound range allowing for more bikes and more types of riders, to the various small improvements that add up to significant gains in performance – it all comes together to make what we think is a big step forward in mountain bike suspension.” Wider Range of Adjustment DB Kitsuma boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. The rebound range has also been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes. See and Feel What Your Settings Are The entire range of DB Kitsuma’s low-speed compression and rebound circuits are controlled within a single rotation, while the high-speed circuits are controlled within two rotations, allowing the rider to easily reference where they are within their adjustment at a glance.  DB Kitsuma simplifies the tuning process by increasing the range of adjustment while reducing the number of external positions in each circuit – making each position more meaningful and discernible on the trail. Tool-Free Adjustment  No need to crane your neck under your bike while fumbling with tiny allen wrenches to make adjustments. DB Kitsuma sports completely tool-free adjusters that are ergonomically designed to be easily accessible and adjustable trail-side – giving riders the power of a pro-tune at their fingertips. Three Position Climb Switch DB Kitsuma is equipped with a single lever that switches the shock between three distinct modes, drastically affecting the shock’s feel and character. The new three position climb switch retains the “Descend” mode and patented “CS” mode which provides a stable yet responsive platform engineered to maximize traction and pedal efficiency while climbing over technical terrain and singletrack. DB Kitsuma also adds a new “Firm” mode. By utilizing a design that closes off the common bleed port, this third position excels at pedaling over long stretches of pavement or gravel roads on your way to the trail. Additional information Weight 417g (DB Coil 210mm w/o spring) Damper Twin Tube independent compression and rebound  damping circuits.  Motorex 4wt Damper Oil. Adjustments High speed compression, Low speed compression, High speed rebound, Low speed rebound Shaft Diameter 9.5mm Suspension Tools Service seal kits MTB Shocks

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for Cane Creek DBair CS  damper and air can - upgraded & improved  Compatibility with Cane Creek DBair CS  shocks  both generation -   with blue and yellow air piston  Covers both parts - air can and damper seals  Covers all production years of  Cane Creek DBair CS  - so it may include some extra seals that are not required for your shock.  Include s chrader  valve core rated  for  800 PSI   Backup Rings  NOT included  - you can reuse them  many times   You can order set of this seal kit and  4oz (114g)  Slickoleum Friction Reducing Grease  here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world Vacuum bleed adaptors (connectors) for shock & fork These adaptors will help you level up the service of shock absorbers and forks to a factory-level service!  These adaptors created to work with this vacuum bleed forks & shocks machine , but we add 1 additional vacuum  stainless steel  quick-release coupler with standard BSP 1/4 thread, so you can use it with other tools.  Please ask us with any questions Kit of 18 PRO adapters (for regular shocks and forks) compatible with:  *Bold text highlights the difference between the PRO kit and kit of 6 the most common adapters  Fox: Float X 2014-2017 (Factory, Performance, Elite) air shocks Float DPX2 (Factory, Performance, Elite) air shocks Float X 2022+ (Factory, Performance, Elite) air shocks DHX (3.0, 4.0, 5.0) coil shocks DHX 2022+ coil shocks Float DHX (3.0, 4.0, 5.0) air shocks DHX RC2 (Factory, Performance) coil shocks DHX RC4 (Factory, Performance) coil shocks Float X2 2016-2020 (Factory, Performance, Elite) air shocks Float X2 2021+ (Factory, Performance, Elite) air shocks DHX2 2016-2020 (Factory, Performance, Elite) coil shocks DHX2 2021+ (Factory, Performance, Elite) coil shocks Specialized Brain  air shocks    Specialized  Micro Brain air shocks  some others Fox   models with bleed port in IFP 32 FIT4 3pos forks dampers 34 FIT4 3pos forks dampers 32 FIT4 w/Adj forks dampers 34 FIT4 w/Adj forks dampers 36 FIT4 w/Adj forks dampers 36 FIT RC2 forks dampers 40 FIT RC2 forks dampers Marzocchi: Bomber CR  coil  shocks Push:  ElevenSix coil shocks Manitou: Mara Pro air shocks Mezzer forks dampers DVO:  Topaz T3 air shocks Topaz 2 air shocks Jade X   coil  shocks Onyx DC forks dampers Onyx SC forks dampers Onyx DC D1 forks dampers Onyx SC E1 forks dampers Onyx SC D1 forks dampers Diamond forks dampers Diamond D1 forks dampers Diamond Boost forks dampers Beryl forks dampers Sapphire D1 forks dampers Sapphire Boost forks dampers RockShox: Monarch Plus (R, RC3)  air shocks Super Deluxe ( Select, Select+, Ultimate,  Ultimate R,  Ultimate DH,  R, RC, RCR, RCT, RC3, RT)  Air shocks Super Deluxe  (Select, Select+, Ultimate,  Ultimate R,  Ultimate DH,  R, RC, RCR, RCT, RC3, RT ) Coil shocks Kage  (R, RC)  coil shocks ALL Vivid (R2, R2C) coil shocks ALL Vivid (R2, R2C) air shocks Specialized Brain 2018-2020 air shocks Specialized Brain 2021+ air shocks Reba   Charger  2   ( RLC)  forks  damper s Sid 32   Charger Race Day and Charger  2   ( RLC)  forks  damper s Sid  35  Charger Race Day   forks  damper s RS-1   Charger  2   ( RLC)   forks  damper s Revelation  35  Charger 2  and 2.1    ( RCT, RCT3)  forks  damper s Yari   Charger 2  and 2.1  (RC2, RCT3, RCT )   forks  damper s Pike   Charger 2  and 2.1  ( Select, Select+, Ultimate,  RC2, RCT3, RCT, RC)   forks  damper s Lyrik   Charger 2  and 2.1   ( Select, Select+, Ultimate,  RC2, RCT3, RCT )  forks  damper s Zeb   Charger  2.1   ( Select, Select+, Ultimate)  forks  damper s Boxxer  Charger 2  and 2.1  ( Select, Ultimate,  RC2, RC )  forks  damper s Pike   Charger  1  gen ( RC, RCT3, RC DJ)  forks  damper s Lyrik   Charger  1  gen  ( RC, RCT3)  forks  damper s Boxxer  Charger  1  gen  ( RC)  forks  damper s Ohlins: TTX1Air   shocks TTX2Air   shocks TTX air   shocks STX22 air shocks TTX22 coil shocks  TTX22M coil shocks  RFX 36 forks dampers Some rare MTB and common moto shocks Cane Creek: DB Coil  shocks DB Coil CS  shocks DB Air  shocks DB Air CS  shocks DB Heritage   coil shocks DB Kitsuma coil shocks  DB Kitsuma air shocks  Inline shocks DB IL Coil shocks DB IL Air shocks X-Fusion: H3C  coil shocks Vector Coil ( R C, HLR) shocks Vector Air ( R C, HLR) shocks RV-1 Roughcut forks dampers Metric Roughcut forks dampers Trace36 Roughcut forks dampers Sweep Roughcut forks dampers Slant Roughcut forks dampers McQueen Roughcut forks dampers Revel-X Roughcut forks dampers Slide Roughcut forks dampers  EXT :  Storia V3 coil shocks ELKA : Stage 5  coil shocks MRP : Hazzard  coil shocks Raze  coil shocks Ribbon forks dampers Bartlett forks dampers Raven forks dampers BOS : Syors coil shocks Void3 air shocks Fast Suspension : Fenix coil shocks Formula : MOD coil shocks Nero R forks dampers  Nero C forks dampers  Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for Fox Float X2 2016-2020 damper and air can - upgraded & improved  Compatibility with Fox Float X2 2016-2020 air shocks  Covers both parts - air can and damper seals  Covers all production years of  Fox Float X2 2016-2020  models - so it may include some extra seals that are not required for your shock.  Include s chrader  valve cores rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)  Inc ude  best suspension grease -   Slickoleum Friction Reducing   Grease  4oz (114g)   4 main PTFE backup rings included - 2 for air can and 2 for air piston   You  can order this seal kit without g rease   here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for Fox Float X 2022+ damper and air can - upgraded & improved  Compatibility with Fox Float X 2022+ air shocks  Covers both parts - air can and damper seals  Covers all  Fox Float X 2022+  models - so it may include some extra seals that are not required for your shock.  Include s chrader  valve core rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)   4 main PTFE backup rings included – 2 for air can and 2 for air piston  You can order set of this seal kit and  4oz (114g)  Slickoleum Friction Reducing Grease  here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

SKF Low-Friction Dust Wiper Seal Kit Fox 40mm Fits 2016-Current Forks

Dear buyers, I want to offer for you a vintage small chess set for kids that was produced in Georgia USSR in circa 1980s. The board is pasteboard and chessman are plastic. The board and chessman are without damages. The set is really small. This is a beautiful and vintage chess set in good condition, like on a real photo. In general the chess set is completely suitable for use according to its purpose or can be excellent part of your collection because of uncommon exemplar. Condition: like new. All details (pros and cons) on the photos. Box measurements approx: 16.5x9x2.5cm / 6.3х3.5x0.8 inch. Board: 15.5x15.5cm / 5.9х5.9 inch. Chessman: from 2.5 to 3.5 cm / 0.8 to 1.2 inch. Weight: 108 g.

Portrait doll that look like you. Rag doll Personalised doll Custom doll Personalized fabric doll interior doll gift Photos submitted for the example, this interior doll was made to order. BORED OF ORDINARY GIFT IDEAS? If someone you know is bored of receiving an ordinary gift, this will delight! Imagine her surprise when she opens her package and sees what an awesome gift you've had created just for her. Each doll is made by me in my studio Ladna Dolls in Ukraine and my personalized dolls are not an exact portrait but a representation of the main features that characterize us. I can make any doll based on a photo or picture you send me. I create clothes and accessories, as in the photo. Hair and hairstyle will be like in the photo. Production time is about 1-2 weeks plus shipping. Clothing is not removable. STUFFING: polyester fiberfill DIMENSIONS: +/- 11 inches/28 -30 cm tal HOW TO ORDER _ Please send me a MESSAGE through Etsy with: _ One or more PICTURES, preferably FULL BODY and wearing the clothes that represent the best the main features you would like to be portrayed, as well as any accessories _ eye and hair colour (sometimes they are not visible or clear in the picture(s)) I will start creating your dolls AFTER receipt of payment and I will send you a picture prior to shipping to see the final result. IMPORTANT: If you are not sure about which option is the best for you or if you have any special requests (ex. special accessories, tattoo, special clothing and/or hairstyle..) please CONTACT me BEFORE PURCHASING, because the price may be different PLEASE, NOTE: -dry clean only, -doll and toys do not contain any timber or metal frames inside, -doll can be played with by children over 5 years old, -doll is stuffed with non-allergenic polyester fiber, -doll created in the room free of tobacco and pets. ------------------------------------------------------------------------- DELIVERY 1.Doll will be packed in quality box for safe transportation. 2. International delivery will be made by Registered Airmail. Ukrainian postal service "UKRPOSHTA" is a reliable company. 3. Sending order in 10-14 business days after payment is received. Tracking number will be given after package is sent by Ukraine registered airmail. Usual it takes up to 15 days to get package to European countries and up to 20 to America, Canada, Australia and New Zealand. Depending on situation, it may take 35-40 days. Thank you for visiting me, if you have any questions please don't hesitate to contact me.

Good condition. See photo. Click the "ADD TO CART" button to open your exclusive collection  Click the "ADD TO CASE" button below before the prices go up!   I still do not have a big rating, but I compete for delivery and honesty.   You transfer money to my intermediary, who gives them to me. After receiving the goods.   Payment:   I accept PayPal only. If you do not have a PayPal account and want to pay your credit card, check out this step-by-step guide for PayPal:  https://www.paypal.com/webapps/mpp/pay-online   Your order will be sent only after the payment has been cleared.  I combine shipping I'm selling this AS A WORKING condition is unknown.  I do not check and I do not know if there are any problems that are not visible on the outer case. All my items are sold in the indicated state. I do not know if they will work and do not guarantee their work after receipt. AS IT IS  You have a collectible that increases value over time and an ideal gift idea. Also each of my products will be very carefully packed and shipped after the payment has been cleared. I ship around the world a reliable carrier, I provide a tracking number. If you have any questions or need information about the subject, do not hesitate to contact me.   Thank you very much for taking the time to come.

Kit contains resin and photoetched parts for assembly of U.S. Navy torpedo loading cart. DETAILS: Type: Aircraft Scale: 1/48 Products: Resin, photoetch Manufacturer: Metallic Details

Set contains parts for detailing the exterior of the aircraft. The set contains: 1 sheet - 90*65 mm. "The Boeing 787 Dreamliner - an American long-haul, mid-size widebody, twin-engine jet airliner made by Boeing Commercial Airplanes. Produced: 2007 – present. Operators: Australia, Azerbaijan, Belgium, Brunei, Canada, Chile, China, Colombia, Ethiopia, France, India , Japan, Jordan, Kenya, Mexico, Morocco, Netherlands, Norway, Oman, Poland, Qatar, Singapore, Spain, Thailand, United Kingdom, United States, Uzbekistan." DETAILS: Type: Aircraft Scale: 1/144 Products: Photoetch Manufacturer: Metallic Details Recommended for kit: Zvezda

Set contains parts for detailing the exterior of the aircraft. The set contains: 1 sheet - 90*67 mm. "The Boeing 777 - a family of long-range wide-body twin-engine jet airliners developed and manufactured by Boeing Commercial Airplanes. The 777-300ER ("ER" for Extended Range) is the B-market version of the -300 (396 passengers in a two-class seating arrangement). The -300ER is the best-selling 777 variant. Produced: 2004 – present. Operators: Angola, Australia, Bangladesh, Brasil, Canada, China, France, India, Indonesia, Ireland, Japan, Kuwait, Netherlands, New Zealand, Pakistan, Philippine, Qatar, Russia, Saudi Arabia, Singapore, South Korea, Switzerland, Turkey, United Arab Emirates, United Kingdom, United States." DETAILS: Type: Aircraft Scale: 1/144 Products: Photoetch Manufacturer: Metallic Details Recommended for kit: Zvezda

Set contains parts for detailing the exterior of the aircraft. "The Boeing 737 - a short- to medium-range twinjet narrow-body airliner developed by Boeing Commercial Airplanes. Produced: 1966 – present. Operators: Afghanistan, Albania, Algeria, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belarus, Belgium, Bolivia, Bosnia and Herzegovina, Brazil, Brunei, Bulgaria, Cambodia, Canada, Chile, Colombia, Croatia, Cyprus, Czech Republic, Denmark, Ecuador, Egypt, Estonia, Ethiopia, Fiji, Finland, France, Georgia, Germany, Greece, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Japan, Kazakhstan, Kenya, Kyrgyzstan, Latvia, Lithuania, Luxembourg, Macedonia, Madagascar, Malaysia, Mauritania, Mexico, Mongolia, Morocco, Netherlands, New Zealand, Nigeria, Norway, Oman, Pakistan, Panama, Papua New Guinea, Paraguay, People's Republic of China, Peru, Philippines, Poland, Romania, Russia, Samoa, Saudi Arabia, Serbia, Singapore, Slovakia, South Africa, South Korea, Spain, Sri Lanka, Sweden, Taiwan, Tajikistan, Tanzania, Thailand, Trinidad and Tobago, Tunisia, Turkey, Ukraine, United Arab Emirates, United Kingdom, United States, Vanuatu, Venezuela, Vietnam, Zambia, Zimbabwe." DETAILS: Type: Aircraft Scale: 1/144 Products: Photoetch Manufacturer: Metallic Details Recommended for kit: Zvezda

Set contains resin and photoetched parts for detailing wiring, bomb bay, 4 torpedoes Mk-46, torpedo holders of aircraft model. "The S-3 Viking - a four-seat, twin-engine turbofan-powered jet aircraft, manufactured by Lockheed. Produced: 1974-1978. Operators: United States. " DETAILS: Type: Aircraft Scale: 1/48 Products: Resin, photoetch Manufacturer: Metallic Details Recommended for kit: Italeri

Set contains 1 photoetched boards (32*144 mm) for exterior detailing. "The Boeing 737 MAX - a narrow-body aircraft series as the fourth generation of the Boeing 737, designed by Boeing Commercial Airplanes. Produced: 2014 – present. Operators (delivered, Boeing 737-8 MAX): Argentina, Brazil, Canada, China, Czech Republic, Ethiopia, Germany, Iceland, India, Indonesia, Ireland, Kazakhstan, Mauritania, Mexico, Morocco, Norway, Poland, Qatar, Singapore, Turkey, United Arab Emirates, United States." DETAILS: Type: Aircraft Scale: 1/144 Products: Photoetch Manufacturer: Metallic Details Recommended for kit: Zvezda

Set contains resin and photoetched parts for detailing of landing gears. " The An-225 Mrija (NATO: "Cossack") - a strategic airlift cargo aircraft, designed by the Antonov Design Bureau. Produced: 1985 - present. Operators: Ukraine. " DETAILS: Type: Aircraft Scale: 1/144 Products: Resin, photoetch Manufacturer: Metallic Details Recommended for kit: Revell

Set contains resin and photoetched parts for detailing of engines. " The An-225 Mrija (NATO: "Cossack") - a strategic airlift cargo aircraft, designed by the Antonov Design Bureau. Produced: 1985 - present. Operators: Ukraine. " DETAILS: Type: Aircraft Scale: 1/144 Products: Resin, photoetch Manufacturer: Metallic Details Recommended for kit: Revell

- MD14428 An-225 Mrija. Landing gears; - MD14429 An-225 Mrija. Engines; - MD14430 An-225 Mrija. Exterior. " The An-225 Mrija (NATO: "Cossack") - a strategic airlift cargo aircraft, designed by the Antonov Design Bureau. Produced: 1985 - present. Operators: Ukraine. " DETAILS: Type:  Aircraft Scale:  1/144 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Revell

Set contains resin and photoetched parts for detailing of engines. " The An-124 Ruslan (NATO: Condor) -  4th generation heavy Soviet long-range transport aircraft, designed the Antonov Design Bureau. Produced: 1982-2004. Operators: Russian Federation, Soviet Union, United Arab Emirates, Ukraine, United Kingdom. " DETAILS: Type:  Aircraft Scale:  1/144 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Revell

Set contains photoetched parts for detailing of exterior, bomb bay and landing gear s for aircraft model. "The B-2 Spirit - a heavy strategic bomber, flying wing design, featuring low observable stealth technology, manufactured by Northrop Grumman. Produced: 1987-2000. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/144 Products:  Photoetch Manufacturer:  Metallic Details Recommended for kit:  AMP

Set contains resin and photoetched parts for detailing of antennas for aircraft model. "The C-5 Galaxy - a large military transport aircraft, manufactured by Lockheed. Produced: 1985-1989. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/144 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Roden

Set contains parts for detailing the exterior of the aircraft. The set contains photoetching and resin parts (4 air intakes and engine components). "Aerospatiale/BAC Concorde - a British-French turbojet-powered supersonic passenger jet airliner developed and manufactured by Sud Aviation (later Aerospatiale) and the British Aircraft Corporation (BAC). Produced: 1965–1979. Operators: France, Singapore, United Kingdom, United States." DETAILS: Type:  Aircraft Scale:  1/144 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Revell

Set contains parts for detailing the exterior of the aircraft.   "The C-17A Globemaster - a large military transport aircraft developed by McDonnell Douglas. Produced: 2001–2015. Operators: Australia, Canada, India, Kuwait, NATO, Qatar, United Arab Emirates, United Kingdom, United States." DETAILS: Type:  Aircraft Scale:  1/144 Products:  Photoetch Manufacturer:  Metallic Details Recommended for kit:  Revell

Set contains resin and photoetched parts for detailing of wheel bays and landing gear for aircraft model. "The C-5 Galaxy - a large military transport aircraft, manufactured by Lockheed. Produced: 1985-1989. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/144 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Roden

Set contains 28 resin parts, photoetching board (56*71 mm ). "The C-5 Galaxy - a large military transport aircraft, manufactured by Lockheed. Produced: 1985-1989. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/144 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Roden

MDR14416 Antennas and sensors of Soviet civil aviation 25 pcs DETAILS: Type:  Aircraft Scale:  1/144 Products:  Resin Manufacturer:  Metallic Details

Use for aircraft Focke-Wulf Fw 200 Condor, Junkers Ju 290. "The FuG 200 "Hohentwiel" - a low-UHF band frequency maritime patrol radar system of the Luftwaffe, developed by C. Lorenz AG." DETAILS: Type:  Aircraft Scale:  1/72 Products:  Photo etched parts Manufacturer:  Metallic Details Recommended for kit:  All

Set contains parts for detailing the interior and exterior of the aircraft. "The Sukhoi Su-27 (NATO: Flanker) - a twin-engine supermaneuverable fighter aircraft designed by Sukhoi. Produced: 1982 – present. Operators: Angola, Belarus, People's Republic of China, Eritrea, Ethiopia, Indonesia, Kazakhstan, Mongolia, Russia, Ukraine, Uzbekistan, Vietnam, United States." DETAILS: Type:  Aircraft Scale:  1/72 Products:  Photoetch Manufacturer:  Metallic Details Recommended for kit:  Zvezda 

4 x Engine 8 x Compressor exhaust 2 x Landing gear bays " The B-29 Superfortress - a four-engine propeller-driven heavy bomber designed by Boeing. Produced: 1943–1946. Operators: Australia, Soviet Union, United Kingdom, United States. " DETAILS: Type:  Aircraft Scale:  1/72 Products:  Photoetch, resin Manufacturer:  Metallic Details Recommended for kit:  Academy

Designed to improve the appearance of the model. "The SR-71 "Blackbird" - a long-range, Mach 3+ strategic reconnaissance aircraft developed by Lockheed and its Skunk Works division. Produced: 1966–1999. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/72 Products:  Photoetch Manufacturer:  Metallic Details 

Set contains 25 resin parts, photoetching board (40*21 mm). "The SR-71 "Blackbird" - a long-range, Mach 3+ strategic reconnaissance aircraft developed by Lockheed and its Skunk Works division. Produced: 1966–1999. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/72 Products:  Resin, photoetch Manufacturer:  Metallic Details 

Set contains 10 resin parts for detailing of air intakes. Two assembly options. " The B-1B Lancer - a supersonic variable-sweep wing, heavy bomber, manufactured by Rockwell International. Produced: 1983-1988. Operators: United States. " DETAILS: Type:  Aircraft Scale:  1/72 Products:  Resin Manufacturer:  Metallic Details 

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite SW Blue Bird SBB682UL-S 2.04m 1-7g 4-6lb Ex-Fast Favorite SW Blue Bird SBB732ML-S 2.19m 4-14g 4-10lb Ex-Fast   Favorite SW Blue Bird SBB792L-T 2.36m 2-10g 4-6lb Ex-Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite SW Blue Bird - a specialized model for sea fishing from the shore microjig baits. Taking into account the peculiarities of this type of fishing, it has a special system in which a hard comel passes into a softer sensitive tip, which allows animating the bait and visually tracking the bite of the fish. In the lineup there are spinning rods with a monolithic apex for the most delicate delivery and with a hollow (tubular), which allows long casting of small silicones and spinners. To improve bite visualization, the upper windings of the rings are painted in contrasting white and orange. The lightweight Blue Bird Saltwater blank is made of IM30T carbon fiber, which offers high levels of elasticity, strength and sensitivity. Lightweight streamlined streamlined rings are installed on the spinning rod, for which the cord will not overlap during casting even in windy weather. The short, spaced EVA handle with ergonomically designed reel seat fits comfortably in your hand, allowing the angler to fully understand the fishing process. Favorite SW Blue Bird spinning will allow you to enjoy fishing in coastal cliffs when fishing small sea fish with ultralight, light and medium light gear. Manufacturer: Favorite SW Model: Blue Bird SW Rod Type: Spinning, Marine Length, m: 2.04 Test, g: 1-7 Test, lb: 4-6 Weight, g: 102 Number of sections: 2 Shipping length, cm: 106 Story: Ex-Fast Handle (material): EVA Rings (material): Sic Rod Class: Ultra-Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Designed to improve the appearance of the model Kit contains: 2 sheets - 270*126 mm, 1 sheet - 270*70 mm " The B-29 Superfortress - a four-engine propeller-driven heavy bomber designed by Boeing. Produced: 1943–1946. Operators: Australia, Soviet Union, United Kingdom, United States. " DETAILS: Type:  Aircraft Scale:  1/748 Products:  Photoetch Manufacturer:  Metallic Details Recommended for kit:  Revell/Monogram 

Designed to improve the appearance of the model. Set contains: 1 sheet - 113*136 mm, 1 sheet - 52*136 mm. "The SR-71 "Blackbird" - a long-range, Mach 3+ strategic reconnaissance aircraft developed by Lockheed and its Skunk Works division. Produced: 1966–1999. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/48 Products:  Photoetch Manufacturer:  Metallic Details Recommended for kit:  Testors/Italeri 

Set contains 18 resin parts, photoetched board (100*49 mm) for detailing engines. "The S-3 Viking - a four-seat, twin-engine turbofan-powered jet aircraft, manufactured by Lockheed. Produced: 1974-1978. Operators: United States. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Italeri 

Set contains 2 resin and photoetched parts (141*57 mm) for detailing of landing gears for aircraft model. " The Su-34 (NATO: Fullback) - a twin-engine, twin-seat, all-weather supersonic medium-range fighter-bomber/strike aircraft, designed by the Sukhoi Design Bureau. Produced: 2006 - present. Operators: Russian Federation. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Kitty Hawk, Hobby Boss 

Set contains resin and photoetched parts (68*46 mm) for detailing of aircraft model. " The Yak-130 (NATO: Mitten) - a subsonic two-seat advanced jet trainer and light fighter, designed by The Yakovlev Design Bureau. Produced: 2010 - present. Operators: Algeria, Bangladesh, Belarus, Laos, Myanmar, Russian Federation. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Zvezda, Kitty Hawk

In the presence there are such models. Before buying, specify which model you want to buy F Favorite Shard NEW SRD-702H 2.13m 15-50g Ex.Fast Favorite Shard NEW SRDC-702MH 2.13m 9-28g Ex.Fast DESIGNED & ENGINEERED IN UKRAINE Favorite Shard Spinning is a versatile fishing rod designed for harsh environments. Through the use of modern Japanese materials and technologies, we have been able to create a tool that has incredible balance, sensitivity and power. The combination of these characteristics makes it possible to best apply it to such popular types of fishing as jig and twitching. The rigid and responsive blend made of a mix of two types of Carbon Toray 40T and Toray 46T, using MLS Slim (Multi Layer Structure) technology, allows you to carry out various types of jerk postings and instantly pass any, even the most careful, fish bite into the fisherman's hand. O.C.G. (Octa Core Grid) technology - an 8-way high-modulus coal winding, which has been used to create spinning that can withstand any bending and twisting loads. This means that if you have to apply forced weighing of fish, such as snags, then Favorite Shard spinning will be able to focus sufficiently even under the influence of high loads and not allow the trophy to hide in cover. Fuji's modern K-R concept spacer rings prevent the cord from being transplanted during the cast and facilitate the bait's smooth release during the cast. The presence of the model with the rings of the latest advanced developments Fuji Torzite (Favorite Shard TZ model) will satisfy the demands of the most demanding fishermen who want to catch even more sensitive and even far-reaching fishing rods. Considering all the characteristics of the Favorite Shard spinning, it can be safely recommended for catching most predators by baits of the medium-heavy class, both from the boat and from shore. It is also worth mentioning that the Favorite Shard spinning was highly praised at the 2017 Budapest EFTTEX International Fisheries Exhibition and received a silver medal in the Best New Fishing Rod nomination. Features Manufacturer: Favorite Model: Shard Cast Length, m: 2.10 Test, r: 7-28 Test, lb: 12-20 Mass, g: 131 Number of sections: 2 Transport length, cm: 110 Lad: Ex-Fast Sleeve (Material): EVA / Corc Rings (Material): Fuji K Alconite-guides Fishing Rod Class: Medium-Heavy Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

In the presence there are such models. Before buying, specify which model you want to buy Favorite Arena ARN-602XUL 1.8m 0.6-3g 2-4lb M-Slow   Favorite Arena ARN-632SUL 1.9m 0.8-3.5g 2-4lb M-Slow Favorite Arena ARN-662SUL 1.98m 1-4g 2.5-5lb M-Slow Favorite Arena ARN-682UL 2.04m 1.5-5g 2.5-5lb M-Slow Video review of the S pinning  Rod  Favorite Arena &  Favorite  Arena Stream  Video Favorite Arena & Favorite Arena Stream  > Video Favorite Arena & Favorite Arena Stream  > DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Nowadays trout fishing is actively gaining popularity - the so-called area-fishing. Especially for this type of fishing, we have developed a new series of rods Arena. But besides fishing for pond trout, it is perfect for fishing with silicone baits at minimum loads (the so-called nano-jig), as well as fishing on the rivers of various predatory and semi predatory fish with spinners, vibrators and miniature rolls. A sensitive form allows complete control of the bait on the fishing line and in time to react to cautious bite. Medium trout fishery will provide a productive haul out with a minimum number of bezborodnyh hooks. A small total weight of the rod will contribute to making complex animations of baits. The cavity is equipped with rings, arranged according to the KR-concept, which adds additional meters to the casting distance. Manufacturer: Favorite Model: Arena Rod Type: Spinning Test, lb: 2.5-5 Length, m: 1.98 Test, g: 1-4 Weight g: 77 Number of sections: 2 Shipping Length, cm: 104 Story: Moderate Slow Handle (material): Cork Rings (material): Fuji KR-series Spinning class: Super Ultra-Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

In the presence there are such models. Before buying, specify which model you want to buy Favorite Arena Vivid ARNV-BL562UL 1.68m 1.5-5g 2-5lb Mod-Slow Favorite  Arena Vivid ARNV-BR632SUL 1.9m 1-4g 2-4lb Mod-Slow Favorite  Arena Vivid ARNV-TF632SUL 1.9m 1-4g 2-4lb Mod-Slow Favorite   Arena Vivid ARNV-VL632SUL 1.9m 1-4g 2-4lb Mod-Slow Favorite Arena Vivid ARNV-YW632SUL 1.9m 1-4g 2-4lb Mod-Slow Video review of the S pinning  Rod  Favorite Arena &  Favorite  Arena Stream  Video Favorite Arena & Favorite Arena Stream   >   Video Favorite Arena & Favorite Arena Stream   > DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite Arena Vivid - a bright budget version of the classic Favorite Arena - a specialized rod for fishing pond trout. Designed specifically for novice fishermen and fishermen who prefer a bright and extravagant design in the rods. Favorite Arena Vivid is a short, soft rod of parabolic structure. The form is made of carbon fiber modularity of 24 tons, the reel holder is made of plastic. On the whole, the rods are a bit heavier than the current Arena, but the system was still the same classic, typical for most spinning ranges. The series is represented by four rods in several color variants: yellow, brown, purple and "tiffany". Their length and test are as universal as possible for European taxpayers. The Favorite Arena Vivid length is 6 feet and 3 inches, that is, 1.9 meters with a test up to 4 hours. Also, there is another model with a length of 1.68 meters and a 1.5-5 gram test, which is presented in blue. Spinnings The Vivid Arena can be used not only for trout fishing, but also for catching a scallop, perch and other fish on small rivers in the ultra-lite style on small ribs, turntables and vibrations. Manufacturer: Favorite Model: Arena Vivid Rod Type: Spinning Length, m: 1.90 Test, g: 1-4 Test, lb: 2-4 Weight, g: 95 Number of sections: 2 Shipping length, cm: 99 Story: Moderate Slow Handle (material): EVA Rings (material): Sic Spinning class: Super Ultra-Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Favorite Blue Bird 16' BB-732ML-S 2.19m 4-14g Ex-Fast  SPINNING   ROD DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite Blue Bird 2016 was created in order to always keep pace with the times and remain one of the most popular micro-jet fishing rods in Ukraine. The rod has received a new modern design. The form of the material Carbon 30T with a braid of SkyFlex is a combination of lightness and elasticity, a pledge of comfort on fishing and confidence in its gear. A new ergonomic spaced handle with a streamlined reel seat that fits comfortably in your hand. Passing rings, made according to the modern concept, allow to achieve long casting, except for possible overlapping of the cord. Also, for the convenience of moving along the reservoir, a modern "keeper kick" was added, on which it is possible to fasten the bait and it will not interfere with movement. A special rod system with a thin sensitive tip allows you to control everything that happens at the other end of the line. A type Spinning Spinning specialization Mikrodzhig Material Carbon Design Plug-in Length 2.19 m Season Summer Number of sections 2 The weight 110 g Folded length 1.14 m Casting (test) 4-14 g Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Favorite Blue Bird NEW BB-762UL-T 2.30m 1.5-8g   SPINNING   ROD Favorite Blue Bird NEW BB-792L-T 2.36m 2-10g  SPINNING   ROD DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite Blue Bird 2016 was created in order to always keep pace with the times and remain one of the most popular micro-jet fishing rods in Ukraine. The rod has received a new modern design. The form of the material Carbon 30T with a braid of SkyFlex is a combination of lightness and elasticity, a pledge of comfort on fishing and confidence in its gear. A new ergonomic spaced handle with a streamlined reel seat that fits comfortably in your hand. Passing rings, made according to the modern concept, allow to achieve long casting, except for possible overlapping of the cord. Also, for the convenience of moving along the reservoir, a modern "keeper kick" was added, on which it is possible to fasten the bait and it will not interfere with movement. A special rod system with a thin sensitive tip allows you to control everything that happens at the other end of the line. Manufacturer: Favorite Model: Blue Bird NEW Rod type: Spinning Weight, g: 112 Length, m: 2.30 Test, g: 1.5-8 Number of sections: 2 Shipping length, cm: 117 Story: Ex-Fast Test, lb: 4-6 Handle (Material): EVA Rings (material): L-TI GUIGES Spinning class: Ultra-Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. Before buying, specify which model you need Favorite Impulse NEW IMP-682UL-S, 2.07m 2-8g Ex-Fast Favorite Impulse NEW IMP-732L-S, 2.20m 2-10g Ex-Fast Favorite Impulse NEW IMP-762UL-T, 2.29m 0,6-7g Fast Favorite Impulse NEW IMP-832L-T, 2.51m 3-12g Fast  Favorite Impulse NEW IMP-892L-T 2.71m 3-12g Fast Favorite Impulse NEW IMP-792L-T 2.36m 2-10g light spinning rod  DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA In the light came a simplified and more budgetary version of the Ultralight spinning rod Favorite Impulse. From its "top" model, the Favorite Impulse NEW features more simple rings and handle material. The form is made of the same carbon prepreg produced by the Japanese corporation "Toray" modularity of 46 tons, but with the use of another winding in the base section. A sensitive carbon blanket for the rapid construction of the brand-new Impulse NEW is equipped with Fuji Alconite anti-frost rings arranged in a KR-concept, as well as a comfortable reel seat with a lower carbon nut. Favorite Impulse NEW has the same performance characteristics - range at casting, "viscosity" on vyvazhivanii, sensitivity of gear during wiring. The spaced handle of the rod made of EVA and carbon is quite minimal, so it is conveniently placed in the hand. For better visualization and control of the tops during wiring, the winding on several rannings and tulips is made in white. In general, the Favorite Impulse NEW has a strict and stylish design. The main purpose of the new Impulse NEW is to catch a predator from a long distance in the conditions of coastal fishing. In addition to the basic micro-burning focus of the new rod, it can catch on a tiny vibrating and spinning spoon, as well as twitching small wobblers with minimal drag. Model: Impulse NEW Rod Type: Spinning Length, m: 2.36 Test, g: 2-10 Test, lb: 2-5 Weight, g: 96 Number of sections: 2 Shipping length, cm: 122 Story: Fast Handle (material): EVA Rings (material): Fuji Alconite Spinning class: Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite SW X1 Shore 802M 2.44m 7-28g PE #0.6-1.5 Fast Favorite SW X1 Shore 862MH 2.62m 10-30g PE #0.8-1.5 Fast Favorite SW X1 Shore 902EXH 2.74m 20-70g PE #2.0-3.0 Fast Favorite SW X1 Shore 902H 2.74m 15-45g PE #1.5-2.5 Fast Favorite SW X1 Shore 902MH 2.74m 10-30g PE #1.0-2.0 Fast Favorite SW X1 Shore 962EXH 2.92m 20-70g PE #2.0-3.0 Fast Favorite SW X1 Offshore 702M 2.13m 20-50g (Slow Jig 50-130g) PE #2-3 Ex.Fast Favorite SW X1 Offshore 702ML 2.13m 10-35g (Slow Jig 25-80g) PE #1-2 Ex.Fast Favorite SW X1 Offshore 7815ExH 2.38m 40-120g PE #4.0-5.0 Mod.Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Spinning Favorite SW X1 Shore - a versatile and practical rod for sea fishing, designed to catch a medium-sized predator. Its accessibility and functionality will allow even beginners to truly fall in love with spinning fishing and go to the water as soon as possible. Carbon blank IM24T was used for the production of the blank, which has good performance in terms of sensitivity, weight and flexibility, but at the same time it has high strength, which will be just the thing during the fight with the next sea trophy. The access rings with Sic inserts are made in a streamlined style, with frames pointing to the apex, which allows the cord not to be confused during casting. The spaced handle has inserts made of EVA - a pleasant to the touch material that is not affected by salt water. Spinning Favorite Saltwater X1 Shore equally effectively copes with wobblers on jerky wiring, as well as with spinners (pilkers) and silicone during a jig. Manufacturer: Favorite SW Model: X1 Shore Rod Type: Spinning, Marine Length, m: 2.44 /in 96 Test, g: 7-28 Test, lb: PE # 0.6-1.5 Weight, g: 170 Number of sections: 2 Shipping length, cm: 127 Build: Fast Handle (material): EVA Rings (material): Sic Rod Class: Medium Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite Synapse Twitching SYST-602UL 1.82m 2-8g Moderate  Favorite Synapse Twitching SYST-662L 1.98m 3-12g Moderate Favorite Synapse Twitching SYST-702ML 2.13m 4-16g Moderate DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Synapse - a new line of rods designed specifically for lite and ultralight fishing. Synapse fishing line is designed to meet the needs of light fishing enthusiasts. This series includes fishing rods of two different concepts: Synapse - universal fishing rods with a slope in jig fishing and Synapse Twitch Special - special fishing rods for twitching. All Synapse rods feature Fuji AT lightweight titanium rollers and a spaced ergonomic handle. The thickening of the handle lies comfortably in the palm of the hand, the shortened front part makes it easy to put the index finger on the form for maximum sensory and ease of manipulation of light baits. Features Model Number: SYST602UL Warranty: 12 months Manufacturer: Favorite Model: Synapse Fishing Rod Type: Spinning Rod Length, m: 1.82 Test d: 2-8 Test, lb: 4-6 Mass, g: 83 Number of sections: 2 Transport length, cm: 1.02 Lad: Moderate Sleeve (Material): EVA Rings (Material): Fuji Titanium Fishing Rod Class: Ultra-Light Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

GET a 10% DISCOUNT GUARANTEED. Before you buy this product, write to me and I will guarantee you a 10% discount on this product. In the presence there are such models. Before buying, specify which model you want to buy Favorite X1 902MH 2.74m 10-35g Ex.Fast Favorite X1 802H 2.44m 20-50g Ex.Fast Favorite X1 802ExH 2.44m 30-80g Ex.Fast Favorite X1 762H 2.29m 10-36g Ex.Fast DESIGNED & ENGINEERED IN UKRAINE MADE IN KOREA Functional series of fishing rods X1 for demanding fishermen, who appreciate first of all the high characteristics of the tackle and its reliability. The fast, easy and highly sensitive form of the rod is not inferior in its characteristics to the more expensive counterparts. The forms are reinforced by the use of prepregs with different fiber direction and a special carbon winding in the kale part. The fishing line is designed primarily for fishing with jigsaw and jig, which naturally does not prevent it from being used for classic turntables and rockers. Simple design elements made the rod affordable. In its simplicity, it is quite ergonomic handle and conveniently located in the hand, and modern rings are arranged in accordance with the KR-concept. Manufacturer: Favorite Model: X1 Fishing Rod Type: Spinning Rod Length, m: 2.74 Test, d: 10-35 Test, lb: 10-20 Mass, r: 191 Number of sections: 2 Transport length, cm: 144 Lad: Ex-Fast Sleeve (Material): EVA Rings (Material): Sic Fishing Rod Class: Medium-Heavy Payment: We are accepting PAYPAL   We are accepting payments in the USA via Western Bid. Inc Payment must be made within 3 days  . Shipping: We send worldwide. We are shipping via registered airmail(UkrPoshta with tracking number) during 2-3 working days after payment is received. Usually it takes about 10-14 days for a package to arrive to Europe. 14 days to USA, Canada and Asia. 14-21 days to Australia. Delivery to Italy may take from 14 days up to 1 months. Returns:  14 days money back, buyer pays return shipping. If you have any question or problem, please kindly contact me before you leave negative feedback. I'll try our best to resolve the problems and I will service every customer as well as I can.

Set contains 6 parts to assemble 2 inlet cones. "The SR-71 "Blackbird" - a long-range, Mach 3+ strategic reconnaissance aircraft developed by Lockheed and its Skunk Works division. Produced: 1966–1999. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details Recommended for kit:  Testors/Italeri 

The set contains parts to build 1 engine. Designed for the aircraft model B-24 Liberator Monogram kit. Other Applications: Bristol Beaufort, Bloch MB.176, CAC Boomerang, CAC Woomera, Burnelli CBY-3, Consolidated B-24 Liberator, Consolidated PBY Catalina, Consolidated PB2Y Coronado, Consolidated PB4Y Privateer, Curtiss P-36 Hawk, Douglas C-47 Skytrain, Douglas DB-7 (early variants only), Douglas TBD Devastator, FFVS J 22, Grumman F4F Wildcat, Lioré et Olivier LeO 453, Martin Maryland, Republic P-43 Lancer, Saab 17, Saab 18, Short Sunderland MK V, Seversky P-35, VL Myrsky, Vultee P-66 Vanguard. "The R-1830 Twin Wasp - an American aircraft engine produced by Pratt & Whitney, a two-row, 14-cylinder, air-cooled radial design. It displaced 1,830 cu in (30.0 L) and its bore and stroke were both 5.5 in (140 mm). Produced: 1930s - 1940s." DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details Recommended for kit:  Revell/Monogram 

The set contains parts to build 1 engine. Designed for the aircraft model B-17 Flying Fortress Monogram kit. Other Applications: Boeing B-17 Flying Fortress, Boeing 307, Brewster F2A, Curtiss AT-32-A Condor, Curtiss SBC-4 Helldiver, Curtiss P-36 Mohawk, Curtiss SC Seahawk, Curtiss-Wright CW-21, Douglas A-33, Douglas B-18, Douglas DC-2, Douglas DC-3 (DST, G-102 and G-202), Douglas Super DC-3, R4D-8 / C-117, Douglas DC-5, Douglas DF Wright SGR-1820G-2, Douglas SBD Dauntless, FMA AeMB.2 Bombi, General Motors FM-2 Wildcat, Grumman TF-1 / C-1 Trader, Grumman E-1 Tracer, Grumman FF, Grumman F3F, Grumman XF5F, Grumman XP-50, Grumman HU-16 Albatross, Grumman J2F Duck, Grumman S-2 Tracker, Lockheed 14, Lockheed Lodestar, Lockheed Hudson, Martin B-10, North American NA-44, North American O-47, North American P-64, North American T-28B/C/D Trojan, Northrop YC-125 Raider, Piasecki H-21, Polikarpov I-16, Ryan FR Fireball, Sikorsky S-58/HUS/HSS/H-34. "The R-1820 Cyclone 9 - an American radial engine developed by Curtiss-Wright, nine-cylinder single-row supercharged air-cooled radial engine. Produced: 1930s - 1950s." DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details Recommended for kit:  Revell/Monogram

The set contains parts to build 1 engine. Designed for the aircraft model C-45 Expeditor ICM-kit. Other Applications: Airspeed Oxford (AS.46 Oxford V), Air Tractor AT-300, Avro Anson (Mk V), Barkley-Grow T8P-1, Beechcraft Model 18 and military derivatives, Beechcraft Staggerwing D17S, D17W, G17S, Bell XV-3, Bellanca 300-W, Berliner-Joyce OJ, Boeing-Stearman Model 75, Bratukhin G-3, CAC Winjeel, de Havilland Canada DHC-2 Beaver and L-20/U-6 military versions, Douglas C-26 Dolphin, Fleetwings BT-12, Gee Bee Model Z, Grumman G-164 Ag Cat, Grumman G-21 Goose, Howard DGA-11, Howard DGA-15P, Junkers F13, Koolhoven F.K.51, Lockheed Model 10-A Electra, Lockheed Model 12-A Electra Junior, Max Holste MH.1521 Broussard, McDonnell XHJH Whirlaway, Naval Aircraft Factory N3N, North American BT-14, PWS-24bis, Seversky BT-8, Sikorsky H-5 helicopter (and S-51 civil version), Sikorsky S-39 amphibian, Snow S-2B and S-2C, Spartan Executive 7W, Stinson Reliant SR-9F and SR-10F, Vought OS2U Kingfisher, Vultee BT-13 Valiant, Waco S3HD, Waco SRE Aristocrat, Weatherly 201 series, Weatherly 620. The R-985 Wasp Junior - a series of nine-cylinder, air-cooled, radial aircraft engines built by the Pratt & Whitney Aircraft Company. These engines have a displacement of 985 in3 (16 l); initial versions produced 300 hp (220 kW), while the most widely used versions produce 450 hp (340 kW). Produced: 1930s - 1950s. DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details Recommended for kit:  ICM

Set contains parts for detailing of central and front landing gears: - wheel wells; - struts; - wheels; - landing gear doors. "The SR-71 "Blackbird" - a long-range, Mach 3+ strategic reconnaissance aircraft developed by Lockheed and its Skunk Works division. Produced: 1966–1999. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Testors/Italeri 

Set contains 14 resin parts. "The Mikoyan-Gurevich MiG-25 (NATO: Foxbat) - a supersonic interceptor and reconnaissance aircraft. MiG-25RB (NATO: Foxbat-B) - a single-seat reconnaissance-bomber derivative of MiG-25R, fitted with improved reconnaissance systems and a Peleng automatic bombing system (from 1970). MiG-25RBT (NATO: Foxbat-B) - further improved reconnaissance-bomber, with Tangaz Elint equipment. Produced: 1964-1984. Operators: Algeria, Armenia, Bulgaria, Belarus, India, Georgia, Kazakhstan, Libya, Russia, Turkmenistan, Ukraine." DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details Recommended for kit:  ICM

Set contains 4 resin parts and photoetched board (53*145 mm) for detailing of air intakes for aircraft models MiG-25 (ICM). " The Mikoyan-Gurevich MiG-25 (NATO: Foxbat) - a supersonic interceptor and reconnaissance aircraft. Produced: 1964-1984. Operators: Algeria, Armenia, Bulgaria, Belarus, India, Georgia, Kazakhstan, Libya, Russia, Turkmenistan, Ukraine. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  ICM

Set contains resin and photoetched parts for detailing of cockpit for aircraft model Su-34 (Kitty Hawk, Hobby Boss). " The Su-34 (NATO: Fullback) - a twin-engine, twin-seat, all-weather supersonic medium-range fighter-bomber/strike aircraft, designed by the Sukhoi Design Bureau. Produced: 2006 - present. Operators: Russian Federation. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Kitty Hawk, Hobby Boss

Set contains 10 resin parts for detailing of air intakes. Two assembly options. " The B-1B Lancer - a supersonic variable-sweep wing, heavy bomber, manufactured by Rockwell International. Produced: 1983-1988. Operators: United States. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details Recommended for kit:  Revell

Set contains resin and photoetched parts for detailing wheel bays of the aircraft. "The S-3 Viking - a four-seat, twin-engine turbofan-powered jet aircraft, manufactured by Lockheed. Produced: 1974-1978. Operators: United States. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin, photoetch Manufacturer:  Metallic Details Recommended for kit:  Italeri 

Set contains resin parts for detailing of jet nozzles for aircraft model. " The Su-34 (NATO: Fullback) - a twin-engine, twin-seat, all-weather supersonic medium-range fighter-bomber/strike aircraft, designed by the Sukhoi Design Bureau. Produced: 2006 - present. Operators: Russian Federation. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details Recommended for kit:  Kitty Hawk  

Kit contains resin parts for assembly of 2 torpedoes Mk-46 in version for aircraft. "The Mark 46 torpedo is lightweight aerial anti-submarine warfare torpedo. Produced: 1979 - present. Operators: Australia, Belgium, Brazil, Canada, Chile, Ecuador, Egypt, France, Germany, Greece, Indonesia, Israel, Italy, Japan, Kuwait, Mexico, Morocco, Netherlands, New Zealand, Norway, Peru, Philippines, Portugal, Saudi Arabia, South Korea, Spain, Taiwan, Thailand, Turkey, United Arab Emirates, United Kingdom, United States. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details 

Kit contains resin parts for assembly of 2 torpedoes Mk-46 in version for helicopters. "The Mark 46 torpedo is lightweight aerial anti-submarine warfare torpedo. Produced: 1979 - present. Operators: Australia, Belgium, Brazil, Canada, Chile, Ecuador, Egypt, France, Germany, Greece, Indonesia, Israel, Italy, Japan, Kuwait, Mexico, Morocco, Netherlands, New Zealand, Norway, Peru, Philippines, Portugal, Saudi Arabia, South Korea, Spain, Taiwan, Thailand, Turkey, United Arab Emirates, United Kingdom, United States. " DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details  

Set contains resin parts for detailing of nose cone for aircraft model. Design by Bruce Goorney "The SR-71 "Blackbird" - a long-range, Mach 3+ strategic reconnaissance aircraft developed by Lockheed and its Skunk Works division. Produced: 1966–1999. Operators: United States." DETAILS: Type:  Aircraft Scale:  1/48 Products:  Resin Manufacturer:  Metallic Details Recommended for kit:  Italeri 

Make paper Wolf with your own hands All you need is download a digital PDF tamplate, print, cut the paper and glue the pieces together. After purchase, you will automatically receive a download link.Then you need to print the template and assemble the product according to the instructions. You will need A4 paper, printer, glue,ruler, scissors, a little time and inspiration. The paper must be thick (180-250 grams per square meters). Specifications Sheets amount: 12 (A4) Finished product Size: Hight 420 mm Width 193 mm Pepth 272 mm ZIP file included: Wolf_Template.pdf Wolf_Assembly_guide.pdf

Make paper Horse with your own hands. All you need is download a template, print, cut the paper and glue the parts After purchase you get a template and assembly guid in PDF.Just follow the step by step instructions.You will need colored paper (160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration.SVG + DXF(per sheet) included. ---Specifications--- Sheets amount: 11 (A4) Finished product Size: Hight 400 mm Width 418 mm Pepth 137 mm ---Files for download--- Horse_Template.pdf Horse_Instruction.pdf Horse.svg Horse_dxf.zip -Customer support

Papercraft Fox Make paper fox with your own hands. All you need is download a PDF tamplate, print, cut the paper and glue the pieces together. After purchase you get a zip file containing PDF template and PDF assebly guid.Just follow the step by step instructions.You will need colored paper or cardboard(160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration. -At your request, a template in SVG format will be provided -Customer support ---Specifications--- Sheets amount: 13 (A4) Size: Hight 400 mm Width 306 mm Pepth 313 mm ZIP file included: Fox_Template.pdf Fox_Assembly_guide.pdf

Make paper Panther with your own hands All you need is download a digital PDF tamplate, print, cut the paper and glue the pieces together. After purchase, you will automatically receive a download link.Then you need to print the template and assemble the product according to the instructions. You will need A4 paper, printer, glue,ruler, scissors, a little time and inspiration. The paper must be thick (180-250 grams per square meters). Specifications: Sheets amount: 21 (A4) Finished product Size: Hight 28 cm Width 75 cm Pepth 19 cm ZIP file included: Panther_Tamplate.pdf Panther_Assembly_guide.pdf

Make paper Shieald with your own hands All you need is download a digital PDF tamplate, print, cut the paper and glue the pieces together. After purchase, you will automatically receive a download link.Then you need to print the template and assemble the product according to the instructions. You will need A4 paper, printer, glue,ruler, scissors, a little time and inspiration. The paper must be thick (180-250 grams per square meters). Specifications: Sheets amount: 19 (A4) Finished product Size: Hight 550 mm Width 511 mm Pepth 73 mm ZIP file included: Shield_Swords_Template.pdf Shield_Swords_Assembly guide.pdf

Make paper Swan with your own hands. All you need is download a template, print, cut the paper and glue the pieces After purchase you get a template and assembly guid in PDF.Just follow the step by step instructions.You will need colored paper (160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration.SVG + DXF(per sheet) included. ---Specifications--- Sheets amount: 15 (A4) Size: Height:28 cm Width:40 cm Depth:17 cm ---Files for download--- Swan PaperonikDesign.zip included Swan Template.pdf Swan Assembly guide.pdf Swan.SVG SwanDXF.zip included DXF per sheet -Customer support

Make paper Legoman with your own hands. All you need is download a digital PDF tamplate, print, cut the paper and glue the pieces together. After purchase you get a zip file containing Template and Assebly guid in PDF.Just follow the step by step instructions.You will need colored paper or cardboard(160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration. Sheets amount: 30 (A4) Finished product Size: Hight 620 mm Width 467 mm Pepth 302mm ZIP file included: Legoman_63cm_Tamplate.pdf Legoman_63cm_Assembly_guide.pdf Legoman_43cm_Tamplate.pdf Legoman_43cm_Assembly_guide.pdf

Make paper Tree with your own hands. All you need is download a template, print, cut the paper and glue the pieces After purchase you get a template and assembly guid in PDF.Just follow the step by step instructions.You will need colored paper (160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration.SVG + DXF(per sheet) included. ---Specifications--- Sheets amount: 30 (A4) Size: Height:1100mm Width:670mm Depth:31mm ---Files for download--- Tree_Template.pdf Tree_Assembly_guide.pdf Tree.svg Tree_dxf.zip -Customer support

Make paper Dragon head with your own hands. All you need is download a digital PDF tamplate, print, cut the paper and glue the pieces together. After purchase, you will automatically receive a download link.Then you need to print the template and assemble the product according to the instructions. You will need A4 paper, printer, glue,ruler, scissors, a little time and inspiration. The paper must be thick (180-250 grams per square meters). Sheets amount: 17 (A4) Finished product Size: Hight 546 mm Width 223 mm Pepth 286 mm ZIP file included: Dragon_Template.pdf Dragon_Instruction.pdf

Billiard Triangle for Russian Pyramid balls There is a special discounts for wholesale buyers!   Contact us! Material: Wood Ball size: 67-68mm Feel free to ask any questions.  We will defenetelly respond to you. Payment: PayPal Handling: 1-3 bussines days Returns:   Return shipping is the responsibility of buyer unless the return is a result of our mistake. When sending in a return, please note that it can take up to 7 business days for the return to be processed.  We do our best to process as quickly as possible.

Elektronika Game IM-03 "Ocean's Mysteries" Original game on screen. One of the early issues with the rare type of screen ( greasy divers' helmets) . The game has two difficulty levels and is great for training reaction and concentration. The console can be used as a watch with an alarm. Condition The game is mint condition. Please see photos for details. Package Contents Game Box (reprint) Manual (reprint) Batteries are included. Shipping Shipping of my lots can be combined. To combine shipping, please request for the invoice before payment. Shipping usually takes from 10 to15 business days. Item is shipped via Ukrainian Post by registered mail ( with tracking ) and will be delivered by official post service in your country (for example USPS in USA or Royal Mail in UK). Good luck!

Teepee for kids

Here is one UNIQUE speargun tip for spearfishing. The unique part of this tip is that the insert, look like nail, is made out of the toughest steel and almost unbreakable. I use them around rocky bottoms and it never fails on me. You can use it on any spear for band or pneumatic spear gun as long as spear threads are 6 mm. + One spare nail in the set to the tip.

Package Quantity: Section- 3 pcs, threads 6 mm, length 1.9 feet (58 cm)) Slip Tip  - threads 6 mm, length 14,2" (36 cm) Power band length 47" (120 cm), latex in blue rubber sheath (external diameter 9 mm, internal diameter 5 mm) Two clips is the key for twisting the thread with effort • Material of the tip of pole - stainless steel (stainless tube  diameter 10 mm , wall thickness 1.5 mm). • Overall length: 7 foot (214 cm). • Thread: M6 X 1.  • Weight approx.: 750 grams (weight in water approximately 600 grams). • diameter pole: 10 mm.

                                         You are bidding for the                                                                 Shimano GRX Di2 FD-RX815 2-/11-speed Front Derailleur                                                     Sells as you see on photos.    The GRX Di2 FD-RX815 front derailleur by Shimano gives with tyre clearance The Shimano GRX Di2 FD-RX815 electronic front derailleur features a 2.5 mm outer chainline (compared to a conventional Shimano Road front derailleur), making it compatible with wider tyres and rearends. With its 17 tooth capacity it fits perfectly to the Shimano FC-RX810-2 crankset. Thanks to this front derailleur nothing stands in the way of the next Gravel adventure with a 2x setup. Are you interested in the GRX series? Then come have a look at our  Shimano Gravel theme world . You will find many more products there.   Specifications: Series:  GRX Di2 R815 Application:  Gravel, Cyclocross, City & Touring Gearing:  2x (combined with 11-speed) Chainstay Angle:  61-66° Chainline:  46 mm Chainring Size (max.):  46-50 teeth Capacity:  17 teeth Movement:  down-swing Mount:  braze-on Shipping: We will ship by "UkrPost" Registered Airmail, but if you want we can ship by "EMS" Express Airmail (in USA it USPS) it will be more expensive than airmail, for more detail contact us. We will ship the items in the next 1-2 business days of payment receive, but it could take 3 days for the post office to process the packages and left the country. Delivery usually takes from 5 to 25 business days, but we don`t guarantee punctually as the shipment might be delay due to customs random check. Please make sure you gave us CORRECT shipping Address. How long it takes to deliver: by Registered Airmail "UkrPost": Europe: 8-15 business days  USA or Canada: 10-20 business days Australia or New Zealand: 10-25 business days Japan or Taiwan: 10-25 business days  Other Country: 10-30 business days by "EMS" Express Airmail:  Europe: 4-7 business days  USA or Canada: 5-9 business days Australia or New Zealand: 5-10 business days Japan or Taiwan: 5-10 business days  Other Country: 5-12 business days We accept PayPal only

Figures of "Bears" are made of wood. Material - pine. Handmade. Only environmentally friendly materials are used for production. This wooden souvenir will be a great addition to the interior of your home, as well as a nice gift for family and friends. length 7 inches. Width 6.5 inches. Thickness 1 inches. Importantly! Only natural and environmentally friendly wood is used for production. The color, shade and structure of the wood of the finished product may differ slightly from the color, shade and structure of the wood in the photo of the product.

 Unique poker cards made of wood     Limited deck of wooden poker cards. Collectible poker cards. Numbered playing poker cards. Art deco style playing cards. You will have great pleasure playing this deck of poker cards with your friends. Surprise your loved ones! Add our deck to your collection! Our workshop produced unique designer poker cards (54 cards) Standard size. Eco material (eco wood), 0.05 inch (1.4 mm) thick The cards are covered with water-soluble ecological varnish. The designs of pictures, card backs and numbers are laser engraved. The deck is completed in a handmade wooden box.   Chips are not included in the package!

Set of three empty doll bodies is 26 cm /10.2in Fabric doll body is made of cotton without stuffing material!!! This blank, cloth doll body is ready to stuff. Fabric doll body is made of cotton without stuffing material. These pre-made doll bodies are perfect if you wish to make the art doll but don't have the time to make the body. The blank doll bodies are ready for your own creativity. You can personalize them by adding your choice of hair and clothing. Price is for three doll bodies. Select the color of the empty doll. 1-beige 2-Cappuccino 3-chocolate The body is made of cotton. Please feel free to contact me and ask any question. If you like this doll, click “add to cart”. Thank you for looking and have a wonderful day!

5 Dolls blank Body of the doll Body of a doll Set of 5 dolls The height of the doll is 33 cm/13 inch The body is made of cotton. Doll can stand and sit. You have to make doll clothes and hair. This billet will be interesting for those who can't make the doll body Please feel free to contact me and ask any question. If you like this doll, click “add to cart”. Thank you for looking and have a wonderful day!

The doll-box is an original gift for beloved girls. Can be used by children from 5 years old. Little girls will be especially delighted with such a gift. After all, they will have their own little hiding place for various cute trinkets. The doll-box will serve as a worthy decoration for your wife's or mother's dressing table. The doll is hollow inside, made on a plastic base - 3 "inner diameter, 2" deep. The upper part of the doll can be removed completely, attached with Velcro to the lower base. The cute face of the doll attracts attention. The head and arms are mobile. Clothes are not removed. The hat can be removed. Dry cleaning only. Do not soak or wash! Plastic parts can be cleaned with a damp cloth. Please, ask questions about order before purchasing. If you need express delivery, please provide details as your request and I will calculate the shipping cost. And please be sure to check out the other items in my store. I will be grateful for your feedback. If you are unhappy for any reason, let me make you happy, contact me. I am an honest seller and easy to deal with.

Antique compass of the Soviet Russian army for maps. There is a magnifying glass and a ruler with a scale in km.

Compass of the times of the USSR. Good condition.

This handmade tabby cat toy is a wonderful birthday present for a child, friend or loved one. The toy is large, you can even sleep on it. ************************* Materials: Yarn 55% cotton, 45% acrylic. Hypoallergenic filler This composition of the yarn makes it possible to wash the toy many times. ************************** Toy size - 29.52 inches (75 cm) long with tail ************************** Do not use a dryer. Handwash. ************************** If you need a toy of a different color, write to me. I will help you choose a different color. ************************** Completely frameless toy. All details are securely sewn. It does not contain small parts, therefore it is suitable for the smallest children. Suitable for children from 0+ *************************** 100% handmade toy made in smoke free studio.

This educational pyromid giraffe toy will help your child learn to count and distinguish colors. This is a wonderful gift for young mothers who care about the harmonious development of their child. ********************* Toy size: height 15.75 inches (40 cm) base diameter 7.08 inches (18 cm) number of rings 5 pcs. ring diameter 3.55 '' (9cm), inside 1.96 '' (5cm) Detachable rings and giraffe head ********************** Material 50% cotton. 50% acrylic holofiber filler

Soviet vintage  porcelain figurine Good condition. Cracks and chips are absent. Height :   10 cm / 4 inches. Weight: 103 gr Please, see photo of actual item for condition. - All photos are real - Your order will be packaged carefully to ensure it gets to you in perfect condition. Worldwide delivery to any country!!! I guarantee fast sending Your parcel, Tracking number!!! Combined Shipping!  ( subsequent item (lot) + 5 $ ) Thank You for Your purchase! If You are happy with items, please leave me positive feedback with five star!!! I would highly appreciate your kindly & encouraging approval.

Make paper Chimpanzees with your own hands. All you need is download a PDF tamplate, print, cut the paper and glue the pieces together. After purchase you get a zip file containing Template and Assebly guid in PDF.Just follow the step by step instructions.You will need colored paper or cardboard(160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration. -At your request, a template in SVG format will be provided -Customer support ---Specifications--- Sheets amount: 28 (A4) Finished product Size: Hight 430 mm Width 447 mm Pepth 328 mm ZIP file included: Chimpanzees_Template.pdf Chimpanzees_Assembly_guide.pdf -После покупки вы получаете ZIP файл содержащий шаблон развертки в формате PDF и пошаговою инструкцию с иллюстрациями в формате PDF -По вашему требованию будет предоставлен шаблон в формате SVG -Для оплаты картой Visa/MasterCard выберите способ оплаты "other" и вы получите ссылку для оплаты картой -Постоянная поддержка клиентов,вы можете написать мне по любым вопросам

Make paper Eagle with your own hands. All you need is download a template, print, cut the paper and glue the pieces After purchase you get a template and assembly guid in PDF.Just follow the step by step instructions.You will need colored paper (160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration.SVG + DXF(per sheet) included. ---Specifications--- Sheets amount: 18 (A4) Size: Height:35cm Width:66cm Depth:17cm ---Files for download--- Eagle_Template.pdf Eagle_Assembly_guide.pdf Eagle.svg Eagle_dxf.zip -Customer support

Make paper UFO with your own hands. All you need is download a PDF tamplate, print, cut the paper and glue the pieces together. After purchase you get a zip file containing Template and Assebly guid in PDF.Just follow the step by step instructions.You will need colored paper or cardboard(160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration. -At your request, a template in SVG format will be provided -Customer support ZIP file included: Alien_UFO_Template.pdf Alien_UFO_Assembly_guide.pdf Sheets amount: 18 (A4) Size: Height:35cm Width:44cm Depth:20cm Check other models https://www.etsy.com/shop/ShapingPoint -После покупки вы получаете ZIP файл содержащий шаблон развертки в формате PDF и пошаговою инструкцию с иллюстрациями в формате PDF -По вашему требованию будет предоставлен шаблон в формате SVG -Для оплаты картой Visa/MasterCard выберите способ оплаты "other" и вы получите ссылку для оплаты картой -Постоянная поддержка клиентов,вы можете написать мне по любым вопросам

Make paper Turte with your own hands. All you need is download a template, print, cut the paper and glue the pieces After purchase you get a template and assembly guid in PDF.Just follow the step by step instructions.You will need colored paper (160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration.SVG + DXF(per sheet) included. ---Specifications--- Sheets amount: 11 (A4) Finished product Size: Hight 148 mm Width 320 mm Pepth 200 mm ---Files for download--- Turtle_Template.pdf Turtle_Assembly_guide.pdf Turtle.svg Turtle_dxf.zip -Customer support

Make paper Hulk with your own hands. All you need is download a PDF tamplate, print, cut the paper and glue the pieces together. After purchase you get a zip file containing Template and Assebly guid in PDF.Just follow the step by step instructions.You will need colored paper or cardboard(160-250 grams per square meters), printer, glue,ruler, scissors, a little time and inspiration. -At your request, a template in SVG format will be provided -Customer support Specifications Sheets amount: 37 A4 ZIP file included: Hulk_Template.pdf Hulk_Assembly_guide.pdf -После покупки вы получаете ZIP файл содержащий шаблон развертки в формате PDF и пошаговою инструкцию с иллюстрациями в формате PDF -По вашему требованию будет предоставлен шаблон в формате SVG -Для оплаты картой Visa/MasterCard выберите способ оплаты "other" и вы получите ссылку для оплаты картой -Постоянная поддержка клиентов,вы можете написать мне по любым вопросам

Make paper Tom and Jerry with your own hands. All you need is download a digital PDF tamplate, print, cut the paper and glue the pieces together. After purchase, you will automatically receive a download link.Then you need to print the template and assemble the product according to the instructions. You will need A4 paper, printer, glue,ruler, scissors, a little time and inspiration. The paper must be thick (180-250 grams per square meters). Specifications Sheets amount: Tom 36 pages (A4) Jerry 14 pages (A4) Attached files : Tom_Template.pdf Tom_Assembly_guide.pdf Jerry_Template.pdf Jerry_Assembly_guide.pdf

Make paper Dolphin with your own hands All you need is download a digital PDF tamplate, print, cut the paper and glue the pieces together. After purchase, you will automatically receive a download link.Then you need to print the template and assemble the product according to the instructions. You will need A4 paper, printer, glue,ruler, scissors, a little time and inspiration. The paper must be thick (180-250 grams per square meters). Specifications Sheets amount: 6 (A4) ZIP file included: Dolphin_Template_size1 Dolphin_Template_size2 Dolphin_Assembly_guide

Vintage Soviet stopwatch Working USSR  Mechanical                                                                 Original 100%        Information: Material - metal, glass Production: Zlatoust Watch Factory, USSR Year of manufacture 1980s Condition : Excellent working condition !!! in original box!  See photo! Sold as is! Very beautiful sample to your collection! Worldwide shipping: -  We ship your orders within 2-3 business days after the payment cleared. -  The item will be shipped by registered airmail by Ukrainian Postal Service. - Shipping takes 12-23 business days to USA, Canada, Australia and Japan.  - Shipping to Europe takes 7-15 business days.  I combine delivery of lots! If you have any questions, please contact me! Please see my other lots! Enjoy the shopping! 

Vintage Soviet Brown&White Olympic Teddy Bear Without Belt 80s Home Decor USSR   ♦ Lovely mascot of Olympic Games in USSR 1980. ♦ Made in USSR , Soviet Union in 1980s. Authentic Soviet Charm Design! ♦ Height    34 cm  ♦ Payment: PayPal. ♦ Buyer pays for handling/airmail registered shipping worldwide - $20 ♦ Do not hesitate to contact me if you have any question or wish to combine shipping with other items.  ♦ Please look around my shop to save on postage ;-) Antiques is an excellent financial investment, always raising its value! ♦ Please look carefully through the pictures in order to get better idea of the item. I always sell what is shown in the pictures except when there is more than one from the same item. ♦ Please if you find a mistake in the listing description do not buy or bid the item but write me via email for it.  Thank you in advance.

This Pizza set made of high quality felt will be great for kitchen toys, sensory games, role playing games.  Felt pizza set develops: imagination, organizational skills and motor skills of the child. Felt set for the role-playing game "Pizza", diameter 28 cm, consists of 43 parts: Tomato 4 pcs Dough base 4 pcs Tomato sauce 4 pcs Sauce "Carbonara" 4 pcs Cheese 4 pcs Paprika 6 pcs Olives 4 pcs Sausage 3 pcs Crimean onion 3 pcs Mushrooms 3 pcs Packing: pizza box 30 * 30 cm. Please feel free to contact me if you need any further information. The price of the set already includes delivery. !!!!!!!! Dear customers, thank you for your interest and trust in my store. I want to warn you that due to the high workload of mail, the delivery time may increase! !!!!!!! So, my dear, come and stay, get a comfy look and shine all day!

Wooden playing cards box. Jewelry box Eco friendly product. Box for playing cards U***, Poker, Bridge. Skip-** storage box. MTG box Are you tired of losing your playing cards? Does the cardboard box break constantly? Playing card storage box to keep your deck safe and sound. Surprise other players with your uniqueness. The size corresponds to the classic size of playing cards. A unique, stylish gift for game lovers. The box will fit 2 decks of cards. Outside box size: 17.5 cm long x 12.5 cm wide x 7 cm tall (6.88 x 4.92 x 2.75 inches) The box is divided into two equal size pieces, two parts for:10.3 cm long x 7.3 cm wide x 6 cm tall (4.05 x 2.87 x 2.36 inches) The lid is stitched by hand with waxed thread This is a handmade wooden product. The best quality will surprise you! The box contains no cards. Choose a font to personalize

Playing card box. Poker Card Storage Box. Poker gifts for men. Board game storage Wooden Name Card Box, Poker Deck box. Wooden box for playing cards Internal Dimensions: 2.51 "x 0.94" x 3.66 " A storage box for playing cards will protect them from deterioration and keep them in order. Now you don’t need to spend a plenty of time for card searching. Keep your deck of cards at one, comfortable for you place. Playing with your friends will be much easier and faster when you have a card organizer by your hand! Item is made of wood. The engraving is laser cut and polished and coated with environmentally friendly materials. Item has a comfortable way of closing to prevent card from falling out. The box has comfortable shape and smooth surface so it’s nice to have it in your hands. Surprise the ones you love with simple but original present. Genuine leather strap, hand-sewn with waxed thread.

Custom playing cards. Unique wooden playing cards. Luxury black playing cards Limited collection. Eco friendly product This designer deck of cards is made of wood (eco veneer), 0.05 '' (1.4mm) thick Deck of poker wooden cards numbered # 10, # 11, # 6 ****The design of the pictures is made by the illustrator in one line. Each hand drawn caricature is an original. Illustrator Alex Yukhtman All drawings are engraved with a laser. The cards are sanded and coated with a water-soluble varnish. The back of the card is painted in red. Such cards will last for a long time. Over time, they will become a rarity for the collector of playing cards. Standard Poker Cards Size: 2.5 "x 3.5" Playing cards are packed in a handmade wooden box

Do you love pandas as much as I do? Then this needle felting kit is just for you! With a little time, a little effort and much joy you will have a sweet little panda! And it will surely win your heart! This needle felting kit is also possible as a creative kit for children of 8+ years, but strictly under adult supervision, as it contains sharp needles. But the result will surely make any child happy! The finished sheep will measure about 7,5 cm (2,9"). The estimated time needed - 1 hour 30 min. Difficulty level - Easy By following detailed step-by-step video instructions, you'll be very pleased with the finished product and you'll definitely be proud with yourself! "FULL SET" kit contains: - a 2,8” x 1” x 0,5” needle felting pad - two felting needles -styrofoam base with beads as eyes - high quality colorful wool - detailed video instructions (a QR code for the link to the video) - arrives in a 5,5 " x 5,5" gift box

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for Fox Float DRCV Trek damper and air can - upgraded & improved  Compatibility with Fox Float DRCV Trek air shocks  Covers both parts - air can and damper seals  Covers  all production years of   Fox  Float DRCV Trek models - so it may include some extra seals that are not required for your shock.   Include s chrader  valve core rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)   Upgraded nitrogen chamber plug does not require hex tool. Now you need only the needle tool to fill the nitrogen chamber.  Inc ude  best suspension grease -   Slickoleum Friction Reducing   Grease  4oz (114g)   4 main PTFE backup rings included - 2 for air can and 2 for air piston  You  can order this seal kit without g rease   here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal kit for Fox Float DRCV Trek damper and air can - upgraded & improved  Compatibility with Fox Float DRCV Trek air shocks  Covers both parts - air can and damper seals  Covers all production years of  Fox Float  DRCV Trek models - so it may include some extra seals that are not required for your shock.  Include s chrader  valve core rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)   Upgraded nitrogen chamber plug does not require hex tool. Now you need only the needle tool to fill the nitrogen chamber.   4 main PTFE backup rings included - 2 for air can and 2 for air piston  You can order set of this seal kit and  4oz (114g)  Slickoleum Friction Reducing Grease  here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for Fox Float Nude Scott damper and air can - upgraded & improved  Compatibility with Fox Float Nude Scott air shocks  Covers both parts - air can and damper seals  Covers all 2014-2022  Fox Float  Nude Scott models - so it may include some extra seals that are not required for your shock.  Include s chrader  valve core rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)   Upgraded nitrogen chamber plug does not require hex tool. Now you need only the needle tool to fill the nitrogen chamber.  Inc ude  best suspension grease -   Slickoleum Friction Reducing   Grease  4oz (114g)   4 main PTFE backup rings included - 2 for air can and 2 for air piston   Ramp Adjust seals not included – you may reuse it many times  You  can order this seal kit without g rease   here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal kit for Fox Float Nude Scott damper and air can - upgraded & improved  Compatibility with Fox Float Nude Scott 2014-2022 air shocks  Covers both parts - air can and damper seals  Covers all 2014-2022 Fox Float  Nude Scott models - so it may include some extra seals that are not required for your shock.  Include s chrader  valve core rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)   Upgraded nitrogen chamber plug does not require hex tool. Now you need only the needle tool to fill the nitrogen chamber.   4 main PTFE backup rings included - 2 for air can and 2 for air piston   Ramp Adjust seals not included – you may reuse it many times  You can order set of this seal kit and  4oz (114g)  Slickoleum Friction Reducing Grease  here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for RockShox Specialized Brain 2018-2020 damper and air can - upgraded & improved  Compatibility with RockShox  Specialized Brain 2018-2020 air shocks  Covers both parts - air can and damper seals  Covers all  2018-2020   RockShox  Specialized Brain models - so it may include some extra seals that are not required for your shock.  Include s chrader  valve cores rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)   Upgraded bladder included   Upgraded  seal for  main damper shaft included   3 main PTFE backup rings included – 1 for air can and 2 for air piston  You can order set of this seal kit and  4oz (114g)  Slickoleum Friction Reducing Grease  here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller

Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Erstellt mit Eselt - Mobil-optimierte Designs für eBay-Verkäufer Suspension & Vacuum Bleed Tools Service seal kits MTB Shocks FAST Shipping - usually about 5-10 business days to any part of the world ANSO Suspension Seal Kit for RockShox Specialized Brain 2021+ damper and air can - upgraded & improved  Compatibility with RockShox  Specialized Brain 2021+ air shocks  Covers both parts - air can and damper seals  Covers all  2021+   RockShox  Specialized Brain models - so it may include some extra seals that are not required for your shock.  Include s chrader  valve cores rated for  800 PSI (stock valve core with red seal  rated for  350 PSI)   2 main PTFE backup rings included – 1 for air can and 1 for air piston  (others may be reused many times)  You can order set of this seal kit and  4oz (114g)  Slickoleum Friction Reducing Grease  here   Special offer for big orders  (more than 10 of any seal kits) - please ask  Advantages: A wide range of different seal kits fit most high-end shocks and dropper seatpost Compatibility with a wide range of original equipment and aftermarket shock oils Advanced water and mud protection Capability to withstand UV light Reduced wear and air suction for longer life Wiper seals prevent any contamination that could potentially damage piston seals, shaft, air can wall, and other components further inside the system User friendly for quick replacement during the service procedure What are Seal Kits made from? Polyurethane (PUR)  Properties: Very versatile, offers outstanding performance in presence of abrasive contamination, high shock loads and adverse conditions. Nitrile Rubber (NBR)  Properties: Most widely used elastomer in seal industry because of its excellent resistance to petroleum products across all temperatures.  ‘Normal’ Nitrile contains 30% Acrylonitrile content. Fluorocarbon Rubber (FPM)  Properties: Provides a stronger performance in hot conditions, because there are extremely strong bonds between the carbon atoms that form the backbone of the polymer and the fluorine atoms. GF-Polyamide  Properties: Offers a high compression modulus thanks to the glass fiber reinforcement.  Very high load-bearing capacity makes it a good choice for back-up rings and guide ring applications.   Polytetrafluoroethylene (PTFE) Properties: Resistant to virtually all hydraulic fluids, and has excellent chemical, tribological and thermal properties. What is special about our kits? There are 4 factors that place our seal kits above all other seal kits: Quality.  Seal kits has upgraded main seals (air can, shaft, ifp seals) and dust wipers that provide longer life and best performance. Price.   We can beat all OEM parts in value, with better quality. Custom kits.  We can ensure the fast build of any custom kits. Worldwide Shipping. Items On Sale Seller Profile Contact seller