SUPPORT UKRAINIAN SELLERS BY SHOPPING HERE!
TRCorp
On lavky since 2018 | 17 Sales |

IN-18 Exclusive Single Digit NIXIE Clock+Acrylic enclosure RGB [WITH TUBE]

$146.00
New other
+

Shipping information

Economy shipping (Free shipping)
Ukraine

Description

Clock are made on IN-18 IN-18 Single Digit NIXIE Clock with acrylic enclosure with IN-18 nixie tube The clock works with any standard 12V / 0.5A, (1A or more) DC (Power supply not included) central pin-positive 2.1*5.5 connector Tri-colored RGB LED mounted under the NIXIE tube. LED can display any color with a lot of per-defined auto color change effects. High accuracy RTC inside DS3231 Battery backed-up, DS3231 RTC (real time clock) will stay right on time, set the time once and forget it. Fast delivery by airmail Video https://www.youtube.com/watch?v=DkZVPdU6hIk&feature=youtu.be

More from this vendor

Clock are made on IN-18 IN-18 Single Digit NIXIE Clock with acrylic enclosure with IN-18 nixie tube The clock works with any standard 12V / 0.5A, (1A or more) DC (Power supply not included) central pin-positive 2.1*5.5 connector Tri-colored RGB LED mounted under the NIXIE tube. LED can display any color with a lot of per-defined auto color change effects. High accuracy RTC inside DS3231 Battery backed-up, DS3231 RTC (real time clock) will stay right on time, set the time once and forget it. Fast delivery by airmail Video https://www.youtube.com/watch?v=DkZVPdU6hIk&feature=youtu.be
Vendor: TRCorp
$145.00
NIXIE TUBE CLOCK with blue backlight Clocks are made on IN-12 Backlight can be switched off by removing the jumper Clock display: time, date, temperature Four modes of operation (01, 02, 03, 04) mode - 01 (displays only the time) mode - 02 (alternately displayed time and date) mode - 03 (alternately displayed time and temperature) mode - 04 (alternately displays the time, date, temperature) Modes are switched by pressing short button 3 To set the time, date - hold button 3 Supply: standard 12V / 0.5A, (1A or more) DC (Power supply not included) central pin-positive 2.1*5.5 connector In сlock set to "real-time clock", it means when a power failure, time and date will not be reset; the clock continues to run but not display the current time. If you have any questions, happy to answer Fast delivery by airmail
Vendor: TRCorp
$70.00
NIXIE TUBE CLOCK with blue becklight KIT The package includes: 1. Two boards 2. All components for assembly 3. Four IN-4 nixie tubes 4. Assembly diagram Clock are made on IN-4 backlight can be switched off by removing the jumper Clock display: time, date, temperature Four modes of operation (01, 02, 03, 04) mode - 01 ( displays only the time) mode - 02 (alternately displayed time and date) mode - 03 (alternately displayed time and temperature) mode - 04 (alternately displays the time, date, temperature) Modes are switched by pressing short button 3 to set the time, date - hold button 3 supply: standard 12V / 0.5A, (1A or more) DC (Power supply not included) central pin-positive 2.1*5.5 connector In сlock set to "real-time clock", it means when a power failure, time and date will not be reset, the clock continues to run but not display the current time. If you have any questions happy to answer All you need to do is solder all parts and you get a nixie clock such as in the photo. Fast delivery by airmail
Vendor: TRCorp
$57.00
VFD IV-22 Tubes clock With green backlight The package includes: 1. Two boards 2. All components for assembly 3. Four IV-22 VFD tubes 4. Assembly diagram All you need to do is solder all parts and you get a clock such as in the photo. Fast delivery by airmail Battery backed-up, DS1307 RTC (real time clock) will stay right on time, set the time once and forget it supply: standard 5V USB charger or computer port (Power supply not included) - digital accuracy correction - Measured temperature -55.0 ÷ 125.0 ° C - indication alternately. (Time, temperature) - customizable animation change of indication. - use of non-volatile memory of the microcontroller to save settings when the power is turned off. - if you press the PLUS button in the main mode, the time is displayed on the indicators - if you press the MINUS - temperature. When the buttons are released, the automatic change of readings resumes. - When the power is turned on, the clock is in basic mode. Settings- Pressing the MENU button enters the setting mode and selects a group of parameters to set. Within the group, select the parameter for setting by pressing the SET button. In turn, they are available for installation: CLOCK Group: - minutes; - hours; - seconds (reset when you press PLUS or MINUS); - the value of the daily correction of time. The symbol "c" is in the upper digit. diSP group: - Time of the current time indication. The symbols "tc" are in the upper digit. Setting range 0 ÷ 99 sec. If 0 is set, the time will not be displayed; - Time of temperature indication. The symbols "tt" are in the upper digits. Setting range 0 ÷ 99 sec. If 0 is set, the temperature will not be displayed; - Select the effect of the animation. The symbols "EF" are in the upper digits. If 0 is set, the information will be changed without effects, if the automatic mode ("A" symbol) is selected, the effects will be alternately changed. If the "r" mode is selected, the effects will be changed randomly. - Select the speed of the animation. The symbol "P" is in the upper digit. Setting range 0 ÷ 99. One unit corresponds to approximately 2 msec, the higher the value, the slower the animation. The backlight is turned off by removing the jumper. VIDEO https://www.youtube.com/watch?v=QKTJblsF-Mw&feature=youtu.be
Vendor: TRCorp
$51.99
The package includes: 1. Two boards 2. All components for assembly 3.  Assembly  diagram
Vendor: TRCorp
$69.00
VFD IV-22 Tubes clock With red backlight supply: standard 5V USB charger or computer port (Power supply not included) - digital accuracy correction - Measured temperature -55.0 ÷ 125.0 ° C - indication alternately. (Time, temperature) - customizable animation change of indication. - use of non-volatile memory of the microcontroller   to save settings when the power is turned off. - if you press the PLUS button in the main mode,    the time is displayed on the indicators  - if you press the MINUS - temperature. When the buttons are released,   the automatic change of readings resumes. - When the power is turned on, the clock is in basic mode. Settings- Pressing the MENU button enters the setting mode and selects a group of parameters to set. Within the group, select the parameter for setting by pressing the SET button.  In turn, they are available for installation: CLOCK Group: - minutes; - hours; - seconds (reset when you press PLUS or MINUS); - the value of the daily correction of time. The symbol "c" is in the upper digit. diSP group: - Time of the current time indication. The symbols "tc" are in the upper digit. Setting range 0 ÷ 99 sec. If 0 is set, the time will not be displayed; - Time of temperature indication. The symbols "tt" are in the upper digits. Setting range 0 ÷ 99 sec.  If 0 is set, the temperature will not be displayed; - Select the effect of the animation. The symbols "EF" are in the upper digits. If 0 is set, the information will be changed without effects,  if the automatic mode ("A" symbol) is selected, the effects will be alternately changed. If the "r" mode is selected, the effects will be changed randomly. - Select the speed of the animation. The symbol "P" is in the upper digit.  Setting range 0 ÷ 99. One unit corresponds to approximately 2 msec, the higher the value, the slower the animation. The backlight is turned off by removing the jumper.
Vendor: TRCorp
$55.00

Reviews

No posts found

Shipping and Policies

Payment

This store is integrated with the Western Bid™ e-commerce platform, and Western Bid, Inc. is the Merchant of Record for all purchases made in this store. Therefore, you will see "WESTERN BID" listed as the payee on your PayPal account and credit card statement.

I accept PayPal or Credit Cards only.
• Your items will be made and shipped only after the payment is cleared.
• If you don't have Paypal account and would like to pay with your Credit Card, check this step-by-step tutorial on PayPal:
https://www.paypal.com/webapps/mpp/pay-online

Your order will be shipped only after the payment is cleared. This means if you pay via Paypal e-checks there could be delay in 3-5 business days. You can check the status of your payment in your Paypal account or in the correspond invoice here on Lavky.

Shipping

All the items in the order will be securely packed and shipped within 1-3 working days of payment.
Some items may take longer. If the processing time is more than 7 days, it is clearly stated in the product description.

Delivery Address:

• Please make sure your shipping address is correct at the checkout. 

We will ship your order to the address specified on Lavky.com checkout, and not to the address specified on Paypal.

Terms of Delivery

We always ship parcels with a tracking number. We will update you on the tracking number once your order has been prepared and shipped.

Usually delivery takes between one a half and four weeks.

Please note that delivery times may vary depending on your location and customs clearance, so we cannot guarantee the exact time of arrival.

Here are the approximate delivery times:

- USA: 1.5 - 2.5 weeks

- Canada: 2-3 weeks

- Europe: 1-2 weeks

- Australia: 2-3 weeks (sometimes longer, depending on Australian customs)

- The rest of the world: 2-3 weeks

Delivery method

We ship all the parcels from Ukraine (from our logistics centers in Kyiv and Chernivtsi) via international services (FedEx, UPS) in two stages. 

First a parcel is sent by express delivery service to Europe, and then, it is shipped by air mail to the United States, Canada or Europe. 

You can see the movement of the parcel by a tracking number only in the second stage - 4-6 days after sending your order from our center. We estimate the delivery time to 12-18 days.

Express delivery is available only on individual request. Please contact us if you need Express delivery before placing an order so we can update shipping options.

Customs duties and taxes

Customers are responsible for any fees, taxes and duties related to delivery and ordering products to their country of destination.

Packaging

Your order will arrive in a safe cardboard box, with due packaging and protection from damage.

Refunds and Exchanges

I want my clients to be happy, so let me know if you have any problems.

If you are not satisfied with your items / service for any reason, please contact me with the problem before leaving a feedback.