Camera & Camera Lenses

This camera is in good condition, everything works properly. The lens is clean, without scratches and dust. The shutter works at all exposures. Curtains in good condition. The body has minor signs of age or use. Check, please, pictures, it's a part of the description. From my personal collection. S/N 85073842 Shipping via AnPost-25 Euro Time to delivery 30 days

Underwater housing MPK-UWH1 for action cameras sony FDR-X3000, sony HDR-AS300 and sony HDR-AS50

Vintage USSR LARGE magnifying glass USSR Powerful double magnifier. Made in USSR Condition: very good. Diameter - 11.6 cm. It will be very well packaged.

Vintage 35mm film camera Olympus Trip AF 51 The camera is equipped with a 28mm F/5.6 wide-angle lens. ✅ Active autofocus system. Minimum focusing distance: 0.8m. ✅ There is a built-in flash on the front of the case. Flash modes: automatic, with red-eye reduction, fires in low light conditions. ✅ Self-Timer. ✅ The camera independently determines the ISO sensitivity of the film 100-400 units according to the DX code, for films without a DX code, ISO 100 is set. ✅ Powered by two AA batteries (not included). #olympus   #olympustrip35   #olympustripaf5 1  #vintagefilmcamera   #35mmfilmcamera   #2o_old

Very Nice Condition  1600 Shutter Count  Comes with All That Is Pictured Lens Is 18-55mm 1:4-5.6

Movie camera  Ultra16 Krasnogorsk-3  16mm K3 K-3 Meteor 5-1 17-69mm f1.9 zoom lens    The camera is converted to Ultra16 (1.85:1 ratio) film format(new film gate). The "Ultra-16" format is a production format and differs from "Super-16" in the symmetrical arrangement of the frame to the film. In this case, the corners of the exposed area partially enter the perforation. The usable area of the frame with an aspect ratio of 1.85:1 occupies the entire height between the perforations and is 11.8×6.25mm. It can be used to optically print redeemed film copies as well as to obtain high definition video in 16:9 format. The Krasnogorsk-3 (Красногорск-3) is a 16-mm windup camera  made in the former Soviet Union.  The K-3 has been adopted by many film schools, including the University of Southern California's School of Cinema and Television. It has a semi-automatic diaphragm setting. Its low price, rugged construction and sophisticated optics have made it very popular with both beginning filmmakers and professionals. Among the K-3's credits are music videos for the Spin Doctors and Suicidal Tendencies. Director Spike Lee shot some of the footage in his film Get On The Bus using a K3. There is a photo of Spike holding a K-3 on the cover of the soundtrack CD. The Krasnogorsk-3 features: 17-69mm f1.9 zoom precision Zenit Lens Electronic exposure meter Continuously variable speed from 8-48 fps Single-frame animation Rotating mirror beam-splitter Film counter CAMERA TECHNICAL SPECIFICATION Lens: Meteor 5-1 F = 17-69mm, f / 1: 1.9 Film: 16 mm color or black and white, size of a frame: 10,05 x 7,6 mm Frames per second (shutter speed) range: à8 (1/20), 12 (1/30), 16 (1/40), 24 (1/60), 32 (1/80), 48 (1/120) , and single frame The half automatic aperture setting with the thru-the-lens (TTL) exposure meter provides the high accuracy of the film exposure The matte screen provides the clearance setting control The parallaxless reflex viewfinder provides the complete correspondence of the shot with the shot frame, appearing on the movie film Spring motor-drive works without any battery, one cocking provide 5m film winding The half-automatic movie loading the film track simplifiers and make it faster Apertures 1.9 -22 Minimum focusing distance 2m (without close up lens) Semiautomatic aperture setting 77x 0.75 mm filter thread Movie counter Viewfinder has diopter correction (+5 ...- 4) Overall camera dimensions (without pistol grip): 326 x 104 x 194 mm Weight: 3-3 kg (camera and lens), 6-7 kg (All) See my other items to save shipping costs. This is a used item and may have traces of usage. Questions have to be asked before the bid. All information in the listing are not binding and without guarantee. Errors, misprints and prior sale expressly reserved. If you have any issues with your purchase please contact me before leaving a feedback. I value my customers and all problems can be solved. Purchasing old equipment please make sure it is compatible with your new cameras, lenses etc. you are going to use it with. Usual shipping time (with tracking) to EU 7-21 days, USA and Canada 12-25 days, other world 15-35 days. In very rare cases it may be due to customs issues or holiday delays. Import duties, taxes, and charges are not included in the item price or shipping cost.

Before making a purchase, write to me which system do you need a lens for: Nikon or Canon? Video about this lens: Tair-11A for Nikon F or Canon EF. With AF dandelion chip original Dear buyers! Attention!  My store is open 24/7. Postal services of all countries work!  I ship orders within one business day! Shop with me now!  Now we all have a lot of free time that we spend at home!  This means that we can do what we love — photography!  Shop now - enjoy my service and help me make some money! Dear buyers! I am a professional photographer and I myself use a dandelion chip on my lenses with my cameras more than 10 years! I have installed chips on more than 10,000 lenses and adapters! Only I sell with guarantee original dandelion chip for Nikon and Canon! If you bought from me and received my service, you will never buy a similar product from another seller! Only I give instructions and advice before and after the purchase! My service on Ebay is unique and the best. My store is available 24/7 for shopping. Tair-11A with Nikon F mount and Nikon Dandelion chip works on  Nikon FX  and Nikon DX cameras. Also the Dandelion chip for Nikon works through adapters for Canon EF lenses with Nikon Z, Sony, Olympus, Fuji mirrorless cameras. Through the adapter Nikon F - Nikon Z (Nikon FTZ) - this lens works on mirrorless Nikon Z cameras. Tair-11A with Canon EF mount and Canon Dandelion chip works on all Canon EF cameras and via   the EF-R adapter on all Canon EOS R cameras Also the Dandelion chip for Canon works through adapters for Nikon F lenses with Canon R, Sony, Olympus, Fuji mirrorless cameras. Carefully read the description of the lens! Look carefully at the photos  and video of the lens! Tair-11A for Nikon or Canon with programmable  dandelion chip (Lushnikov Dandelion original) ITEMS INCLUDED 1. Tair-11A  2. AF programmable chip-dandelion  for NIkon F or Canon EF 3. Front and rear cap 4. Case ( leather ) PRODUCT DESCRIPTION Tair-11A  f2.8 / 135mm MADE in USSR-1988 year (S/N  №  884654 ) :  The lens is in very good condition! The glass is clean and transparent. Aperture blades are clean and dry. Focusing and aperture rings move smoothly and precisely.  Photos in the lens description - show the real lens that I sell. PRODUCT SPECIFICATIONS Format:  35mm SLR Type:  Prime lens Focusing:  Manual Focus (MF) with Dandelion chip Lens mounts:  Nikon F (FX, DX), Canon EF  (FX, DX) Optical design:  4 elements in 3 groups S/N #  884654 Specifications: Focal length Max. aperture Min. aperture Blades Min. Focus (m.) Filter Ø (mm.) Weight (gr/oz) Length (mm/in) 135mm f/2.8 f/22 20 1.2 52 600/21,2 110/4,3 Additional information: The Tair-11A 135 mm f/ 2.8  (Russian: "Таир") is    a fast telephoto lens. Export model - Tair-11A.  It was produced at the KMZ, Krasnogorsk (the Krasnogorsk Mechanical Plant). This is a fast coated lens. It is equipped with an iris preset aperture. The lens is equipped with a small built-in hood. Its 20-blade aperture is nearly ideally round, which provides a beautiful out-of-focus blur when wide open. The lens is sharp and, at the same time, plastic. As compared to 11 and 11-2 modifications, its resolution at the center and on the edges is much higher. Besides, the 11A modification features a more convenient (and more up-to-date) build. Its minimum focusing distance is 30 cm shorter and makes 1.2 m. It is shorter than his "relatives", but a bit heavier. Modifications with the M42 screw mount are more common, though sometimes you can come across an M39 variant. The A in the lens name means that the adapter can be attached to the lens - interchangeable KP-A/N mount (Rus. КП-А/Н), which makes it possible to use the Tair-11A on cameras with the N (Nikon F) bayonet mount, on Nikon cameras, and on the Zenit-11 camera. Resolution according to the technical specifications (center/edge): 44/24 lpmm Via adapters the 11A 135mm f/2.8 can be easily mounted on modern digital SLR cameras. The model year of a Soviet lens can always be determined by the first two figures of its serial number. PROGRAMMABLE NIKON dandelion CHIP SPECIFICATIONS: Dandelion is designed to be installed on adapter rings and manual lenses so that they could then be used on Nikon AF digital and film cameras.  Because Dandelion is about the same size as a match, it can be fitted to any existing adapter ring or lens with Nikon F bayonet mount. Lenses with such bayonet mounts have been produced since 1959.  With Dandelion fixed on the ring, a camera obtains exposure metering function. If your camera has a 3D matrix meter, it will function as well.  Precision focus will be acknowledged by a sound and light signal. On the screen you will also find highlighted spots that got into focus area. Junior series digital cameras will provide an acknowledging beep.  With Dandelion installed on a lens with an automatic AI-S aperture, the aperture will be controlled through the camera similar to autofocus lenses. This is one of Nikon's strongest points: you don't have to care about aperture when using an old manual lens.  Dandelion has another peculiar feature of "hard" shutter block before acknowledging signal. When pressing shutter release button up to the stop, the shot is made immediately in response to the signal. This is useful when shooting fast-moving objects.  Dandelion's most important feature for eager photographers is the possibility to change its parameters without taking it off the camera. You can alter focal length and other parameters pre-set in Dandelion. See programming instructions.    AF Chip "Dandelion" for Nikon Compatibility   There are only 4 film cameras that Dandelion is not compatible with: F4, F60, F90x,  F801/S PROGRAMMABLE CANON DANDELION CHIP SPECIFICATIONS PROGRAMMABLE CANON DANDELION CHIP SPECIFICATIONS: A new series of Dandelions for digital and film cameras Canon EOS. Since the autumn of 2008 an updated Dandelion is being produced. The case is made of specially hard plastic, for better slip. And the contact areas are covered with a solid layer of gold. The new series received an important function - the programming function. Those. you can independently change the "stitched" in the Dandelion value of the aperture and focal length. And also the most important adjustment function, which allows you to cope with the problems of accuracy of confirmation of focus. The new Dandelion does not use the MF mode, as it was before. Now the focus logic works in AF (autofocus) mode. First, it increases the accuracy of focusing. Secondly, it allows you to adjust the Dandelion to different instances of lenses. Third - the audio confirmation now works on all cameras. For example, on a film EOS 3000N. The sensitivity of the focus sensors in this mode is an order of magnitude higher. There was also one more feature - "hard" locking of the descent to the confirmation signal. If you hold the shutter button all the way down, the picture will be taken instantly at the exact focus signal. This allows you to shoot dynamic stories. And of course the main advantage of the new series is the ability to change the parameters of the Dandelion independently, without removing it from the camera. Parameters of Dandelion

I would like to propose pieces (non-treated) of single crystal magnesium fluoride (MgF2). The material was produced in Ukraine, by the Institute for single crystals (Kharkiv), in October 1983. It was planned to use it during his scientfic-research work, but priorities changed and the materials was lying in the box about next 38 years. There are 11 pieces available with total mas 4,830 kg, their parameters are shown in the table below. Crystallographic  orientation (if marked) Position No. Form/Dimensions, mm Mass, kg F 1 Irregularly-shaped/ 150*77 1,800 F 2 Cylindrical shape/ 36*90 0,275 - F 3 Cylindrical shape/ 93*39 0,300 - F 4 Cylindrical shape/ 85*25 0,258 - F 5 Cylindrical shape/ 81*36 0,234 - F 6 Prism/39*35 0,087 - F 7 Prism/ 69*24 0,182 F 8 Irregularly-shaped/ 57*39 0,245 - F 9 Prism/ 73*22 0,220 - F 10 Prism with cleavage/ 80*42 0,535 F 11 Prism with cleavage/ 80*60 0,700 MgF2 is rare material, which is usually being used for presicion optical components production. These components include  lenses, prisms and  windows with simple or complicated geometry. This material is trasnsparent (transmissivity over 0,9) in spectral range 120-8000 nm.  It should be outlined, that there are only non-treated pieces (see the Photos) available!   Photos have been obtained at day light for the most true color demonstration. The price is noticed per 1 kg.

Industar 3 pcs RO3-3M  Volna 9 KP 6 N adapter  Helios 103 M39  Helios 44 - 13 blades from Start Zenitar NEW 1,9 50 Sonnar 2 50 MTO ALMAZ 103 with lens Zenit MT Mir 20 Kaleinar  Mir 20  Cosmorecs Helios 44M Helios 44m7 Helios 44-3M ZK Cinema lens Helios 44 - 8 blades 2 pcs Jupiter 8 Industar 61  Cinema lens  Helios 77m4 Telor lens 7pcs Helios 33  OKS-1-22-1 = 2pcs  Tessar 4 pcs Volna 9

Roll film washer for  Jobo 2500 series reel size. (photos show smaller washer type, this one will be the same but larger) Roll film washer with reel holder made of stainless steel. Device is called to finish film development and wash out fixer. It also let you to free main tank and develop other films quicker. This washer using overflow method with presure water stream from bottom. Device  compatible  with  Jobo 2500 series  reels . Tube has inner diameter 144 mm  Inlet brass connector has thread 1/2". Available in two sizes: Small washer - can hold 4 reels of 35 mm films or two 120 reels. Large washer - holds 8 reels of 35 mm films or 5 120 reels. (use corresponding option to select your device size) =============== Important notifications! ================ Adapters and hoses  for device connection are not included by default - there are many different standards and personal technical capabilities to know what you need.  If you need these stuff message me . We will disscuss what you need and I'll add them. Production and times Every washer will be created to order.  There are no ready to ship items, therefore keep in mind that producing takes time.  As regular it takes from week to two from material ordering to ready to ship device. Also other orders can be in line when you make your own order and third party delays also happen. In additional these days due to known actions on my land some extra delays may happen. As a rule I notify buyer about production time in message after order. If you worries about times, please ask about it before buying! Washers made of acrylic. Due to manual manufacturing devices may contain marks: small scratches, glue marks on surfaces and bubbles into the glue lines. However it is doesn't take effect on functionality, common look and doesn't limit owners to be satisfied with device. Be sure that each washer I produce with due care and attention. Design may be slightly differ from the sample view on the photographs due to time to time modernisation. Shipping & delivery: It is possible to send goods mostly worldwide with range of services.  Shipping prices are actual mostly for United States. Shipping cost for consumers outside US specified approximately and may differ. Please clarify about delivery cost for your county before ordering. Due to international sale some customs and import taxes may apply to buyers depending on location. All devices are packed well in several package layers, however Please check your parcel at least visually when you will receiving it. In case the box is damaged or looks bad open it with courier to check goods. It may let me and you to get refund if device will be damaged on the way. ========== Options: You can ask to create almost any custom washer or tray for films and prints with necessary holding capacity, additional modules (such as module for Hypo clear solution) and format (up to 20x24" and more). Find more interesting on my Instagram: underredlight

Roll film washer with reel holder made of stainless steel. Device is called to improve finish film development and wash out fixer. It also let you to free main tank and develop other films quicker. This washer using overflow method with presure water stream from bottom. Device  compatible  with large range of reels  as steel as plastic (Paterson System 4, Jobo 1500 series, Kaiser, AP, etc.). Tube has inner diameter 104mm (4,09 in.) Inlet brass connector has thread 1/2". Available in two sizes: Small washer - can hold 4 reels of 35 mm films or two 120 reels. Large washer - holds 8 reels of 35 mm films or 5 120 reels. (use corresponding option to select your device size) ===============  Important notifications!  ================ Adapters and hoses  for device connection are not included by default - there are many different standards and personal technical capabilities to know what you need.  If you need these stuff message me . We will disscuss what you need and I'll add them. Production and times Every washer will be created to order.  There are no ready to ship items, therefore keep in mind that producing takes time.  As regular it takes from week to two from material ordering to ready to ship device. Also other orders can be in line when you make your own order and third party delays also happen. In additional these days due to known actions on my land some extra delays may happen. As a rule I notify buyer about production time in message after order. If you worries about times, please ask about it before buying! Washers made of acrylic. Due to manual manufacturing devices may contain marks: small scratches, glue marks on surfaces and bubbles into the glue lines. However it is doesn't take effect on functionality, common look and doesn't limit owners to be satisfied with device. Be sure that each washer I produce with due care and attention. Design may be slightly differ from the sample view on the photographs due to time to time modernisation. Shipping & delivery: It is possible to send goods mostly worldwide with range of services.  Shipping prices are actual mostly for United States. Shipping cost for consumers outside US specified approximately and may differ. Please clarify about delivery cost for your county before ordering. Due to international sale some customs and import taxes may apply to buyers depending on location. All devices are packed well in several package layers, however Please check your parcel at least visually when you will receiving it. In case the box is damaged or looks bad open it with courier to check goods. It may let me and you to get refund if device will be damaged on the way. ========== Options: You can ask to create almost any custom washer or tray for films and prints with necessary holding capacity, additional modules (such as module for Hypo clear solution) and format (up to 20x24" and more). Find more interesting on my Instagram:  underredlight

Rare early Soviet photo lens Industar-96U 3.5/50 mm, serial number: 9008 with front cap, M39 mount. Appearance has never been used, in general it looks and works like yesterday from the store. Please check the condition in the photos, this is part of the description. Feel free to contact me in front of the sender/buyer if you have any questions or need more information/photos. " >span class="jCAhz ChMk0b" jscontroller="Gn4SMb"> I'm not perfect and I don't know everything, but I always check if everything is possible and consider all available information.

Custom made  print washer for  12  silver gelatine darkroom prints with maximum size 12x16 in. (30x40 cm). This washer type configured with separate sections with own water jets.  Such configuration lets washing fresh fixed prints without risks to pollute prints that are already almost clean. Washer features: - Based on flow-through washing; - Has separate water supply into every section along the bottom. - Inlet and outlet connectors have inch threads (1/2", 3/4"); - Operating and full water drainage carried out through one outlet; - Full drainage is carried out by lifting the shut-off damper (some water remains at the bottom due to construct); - Shut-off damper has rubber seal to avoid leakage during filling or standby; - Partitions have volumetric dots to avoid sheet sticking to them; - Supplied with print downholder. ===============  Important notifications!  ================ Adapters and hoses  for device connection are not included by default - there are many different standards and personal technical capabilities to know what you need.  If you need these stuff message me . We will disscuss what you need and I'll add them. Production and times Every washer will be created to order.  There are no ready to ship items, therefore keep in mind that producing takes time.  As regular it takes from week to two from material ordering to ready to ship device. Also other orders can be in line when you make your own order and third party delays also happen. In additional these days due to known actions on my land some extra delays may happen. As a rule I notify buyer about production time in message after order. If you worries about times, please ask about it before buying! Washers made of acrylic. Due to manual manufacturing devices may contain marks: small scratches, glue marks on surfaces and bubbles into the glue lines. However it is doesn't take effect on functionality, common look and doesn't limit owners to be satisfied with device. Be sure that each washer I produce with due care and attention. Design may be slightly differ from the sample view on the photographs due to time to time modernisation. Shipping & delivery: It is possible to send goods mostly worldwide with range of services.  Shipping prices are actual mostly for United States. Shipping cost for consumers outside US specified approximately and may differ. Please clarify about delivery cost for your county before ordering. Due to international sale some customs and import taxes may apply to buyers depending on location. All devices are packed well in several package layers, however Please check your parcel at least visually when you will receiving it. In case the box is damaged or looks bad open it with courier to check goods. It may let me and you to get refund if device will be damaged on the way. ========== Options: You can ask to create almost any custom washer or tray for films and prints with necessary holding capacity, additional modules (such as module for Hypo clear solution) and format (up to 20x24" and more). Find more interesting on my Instagram:  underredlight

Custom made  print washer for  10  silver gelatine darkroom prints with maximum size 12x16 in. (30x40 cm). This washer type configured with separate sections with own water jets.  Such configuration lets washing fresh fixed prints without risks to pollute prints that are already almost clean. Washer features: - Based on flow-through washing; - Has separate water supply into every section along the bottom. - Inlet and outlet connectors have inch threads (1/2", 3/4"); - Operating and full water drainage carried out through one outlet; - Full drainage is carried out by lifting the shut-off damper (some water remains at the bottom due to construct); - Shut-off damper has rubber seal to avoid leakage during filling or standby; - Partitions have volumetric dots to avoid sheet sticking to them; - Supplied with print downholder. ===============  Important notifications!  ================ Adapters and hoses  for device connection are not included by default - there are many different standards and personal technical capabilities to know what you need.  If you need these stuff message me . We will disscuss what you need and I'll add them. Production and times Every washer will be created to order.  There are no ready to ship items, therefore keep in mind that producing takes time.  As regular it takes from week to two from material ordering to ready to ship device. Also other orders can be in line when you make your own order and third party delays also happen. In additional these days due to known actions on my land some extra delays may happen. As a rule I notify buyer about production time in message after order. If you worries about times, please ask about it before buying! Washers made of acrylic. Due to manual manufacturing devices may contain marks: small scratches, glue marks on surfaces and bubbles into the glue lines. However it is doesn't take effect on functionality, common look and doesn't limit owners to be satisfied with device. Be sure that each washer I produce with due care and attention. Design may be slightly differ from the sample view on the photographs due to time to time modernisation. Shipping & delivery: It is possible to send goods mostly worldwide with range of services.  Shipping prices are actual mostly for United States. Shipping cost for consumers outside US specified approximately and may differ. Please clarify about delivery cost for your county before ordering. Due to international sale some customs and import taxes may apply to buyers depending on location. All devices are packed well in several package layers, however Please check your parcel at least visually when you will receiving it. In case the box is damaged or looks bad open it with courier to check goods. It may let me and you to get refund if device will be damaged on the way. ========== Options: You can ask to create almost any custom washer or tray for films and prints with necessary holding capacity, additional modules (such as module for Hypo clear solution) and format (up to 20x24" and more). Find more interesting on my Instagram:  underredlight

preview lever locker for lenses

 Photo camera fed 2

Pentacon Six - Nikon F adapter with installed original programmable dandelion chip! BEST SERVICE BEFORE AND AFTER PURCHASE! This adapter is made for installation Pentacon Six mount manual lenses to Nikon F DSLR / film camera! I make the free programming each chip . ( in the chip programmed focal length and full aperture range). I make a personal video clip to each buyer of the   adapter with chip, in this video clip I show completely programmed chip! all video recorded for buyers to look at my  YouTube channel  Andrey Kuryanov On this adapter installed programmable  original dandelion chip Nikon. (  Lushnikov  Dandelion chip  - made in Europe - not China!!! ) 1. You can control the lens aperture of the camera. You can select any aperture through your camera! 2. The chip can operate in aperture priority mode A. 3. The chip can operate in mode M, P, and other modes. 4. Chip allows you to select any point of focus. 5. The chip provides the focus confirmation sound and light signal, as the autofocus lens Nikon. 6. The chip will not take a picture until no focus confirmation! (AF trap) AF Chip "Dandelion" for Nikon Compatibility   There are only three film cameras that Dandelion is not compatible with: F4, F60 and F90x. It works with all other models perfectly.  Programming mode is not compatible with F5 and D1X/H models. I do chip pictures and images of the chip packaging process to every buyer! NO RETURN for chip which has been glued ! Before making a purchase please contact the seller for telling him how you want to use a chip and what lens or adapter you want it to be installed on. Please give the following information: 1. The name of the lens or the adapter name,  such as Pentacon 80 / 2,8-22  2. Write the name of your camera, such as Nikon D5100 You get a fully working chip! 1.   I make the free programming of each chip . 2. I give detailed instructions for installing the chip to the lens or adapter! 3. Chip can not be set on the lens with the aperture ratio of 1.2 When buying a chip select: 1. The name of the lens, such as Nikkor 50 / 1,4-16 Non Ai 2. Attach a photo of your lens, made from the  bayonet  mount All the customers receive pictures made with programmed chip parameters and detailed instructions for use. After-sales support is free. The chip is very fragile! In case the customer uses the product improperly and the chip has been mechanically damaged the customer cannot bring claims against the seller. How to photograph with a dandelion chip on lenses without a diaphragm control lever 1. In the camera menu, you need to select the shooting mode AF-S 2. Select the aperture value in the camera 3. Select the same aperture value on the lens 4. Select the focus point (for example, center point) 5. Look at the viewfinder 6. You can fully press the shutter release button 7. Turn the focus ring 8. The camera shutter will work as soon as the subject of the shot is in focus. (This is how the focus trap works). 9. When the focus appears, you will hear the focus confirmation sound and see the focus confirmation light at the selected focus point. Dandelion (  programmable chip )  is designed to be installed on adapter rings and manual lenses so that they could then be used on Nikon AF digital and film cameras.  Because Dandelion is about the same size as a match, it can be fitted to any existing adapter ring or lens with Nikon F bayonet mount. Lenses with such bayonet mounts have been produced since 1959.  With Dandelion fixed on the ring, a camera obtains exposure metering function. If your camera has a 3D matrix meter, it will function as well.  Precision focus will be acknowledged by a sound and light signal. On the screen you will also find highlighted spots that got into focus area. Junior series digital cameras will provide an acknowledging beep.  With Dandelion installed on a lens with an automatic AI-S aperture, the aperture will be controlled through the camera similar to autofocus lenses. This is one of Nikon's strongest points: you don't have to care about aperture when using an old manual lens.  Dandelion has another peculiar feature of "hard" shutter block before acknowledging signal. When pressing shutter release button up to the stop, the shot is made immediately in response to the signal. This is useful when shooting fast-moving objects.  Dandelion's most important feature for eager photographers is the possibility to change its parameters without taking it off the camera. You can alter focal length and other parameters pre-set in Dandelion. See programming instructions.  

Camera Olympus mju 115 2 zoom

Attention buyers from the USA! Delivery times from Ukraine to the USA are only 10-12 business days! I accept orders 24/7 I am a professional photographer and I myself use a dandelion chip on my lenses with my cameras more than 10 years! 
I have installed chips on more than 10,000 lenses and adapters! 
Only I sell with guarantee original dandelion chip for Nikon and Canon! 
If you bought from me and received my service, you will never buy a similar product from another seller! 
Only I give instructions and advice before and after the purchase! 
My service on Ebay is unique and the best. 
My store is available 24/7 for shopping. 
 Dandelion Chip Functionality: 
 1. Nikon camera immediately sees this lens as autofocus lens, without additional settings in the camera menu. 
2. Focus trap - until there is an exact focus, the shutter will not work (this function can be turned off). 
3. Full control of the diaphragm of the manual lens from the camera, if the manual lens has diaphragm control lever. 
4. Confirmation of focusing with light and sound at the selected point. 
5. You can choose any focus point, as with an autofocus lens. 
6. On younger Nikon cameras there will be correct metering (on older Nikon models, metering is by default). 
7. The flash will work in all automatic modes. 8. Record in EXIF all of the image parameters, as when working with an autofocus lens. 
 The Shipping cost price is constant and independent of quantity of purchased dandelion-chips! 
 ATTENTION. Before you make a purchase, send me a message ( text message for example ) " I want to buy chip for the lens: Nikkor 50mm / f 1.4-16, my camera Nikon D750 " Wait for my answer and only after that make a purchase! I answer very quickly at any time of the day or night. Если Вы говорите или понимаете по-русски - можно писать все вопросы на русском/украинском языках. AF Chip "Dandelion" for Nikon Compatibility: 1. There are only 4 film cameras that Dandelion is not compatible with: F4, F60, F90x, F801/S. It works with all other models perfectly. 1.1 . "F60" Function - works on Nikon models with a diaphragm reading mechanism. 1.2. Full compatibility and excellent work with Nikon Z6 / Z7 cameras via Nikon F - Nikon Z ( FTZ ) adapter. 1.3. Programming mode is not compatible with F5 and D1X/H models, but I am sending a fully pre-programmed chip 2 . Dandelion chip can not be installed only on lenses with aperture of 1.2. 3. I pre-program each chip for each of my customers. 4. I give instructions for installing the chip 5. I make consultations for every customer before and after purchase. 6. I make a personal video about each programmed chip for each of my customers. 7. You are guaranteed to get a fully working and pre-programmed chip! ATTENTION-2.   The chip is very fragile! In the case of improper use of the product by the buyer and mechanical damage to the chip, the buyer cannot claim the seller. If you made an attempt to install the chip and failed - RETURN IMPOSSIBLE. Dandelion Specification: Dandelion is designed to be mounted on adapter rings and manual lenses, which can then be used on Nikon AF digital and film cameras. Due to the size, commensurate with the match, Dandelion can be installed on any ring and any lens with a Nikon F bayonet that exist in the world. Lenses with such a bayonet have been produced since 1959. Dandelion can not be installed only on lenses with aperture of 1.2. 
If Dandelion is installed on the ring, the camera gets the function of metering. If your camera has a 3D matrix metering, it will also work. 
Accurate focus will be confirmed by sound and light signal. And the screen will highlight the points that fall into the focus area. On digital cameras younger series of sound confirmation. 
If you install Dandelion on a lens that is equipped with an AI-S type automatic aperture, the aperture on the lens will be controlled from the camera in the same way as autofocus lenses. 
There is another feature - the "focus trap". If you hold the shutter button all the way down, the snapshot will be taken instantly at the exact focus signal. This allows you to shoot dynamic scenes. 
Dandelion Compatibility: Dandelion does not work only on four film cameras: F4, F60, F601, F801 and F90x. It works perfectly for everyone else. Programming mode does not work on only two cameras: F5 and D1X /H. 
 What's in the package: 1. Dandelion chip original (fully pre-programmed and ready to install) 2. Special shelf-corner (for installing the chip on some adapters and some lenses) 3. Caliber for precise chip installation P.S. Programming and installation instructions - in electronic form, in personal correspondence. Variable Dandelion parameters: Diaphragm (Aperture ):  from F1.0 to F90 Focal length :  from 5 mm to 2000 mm ( selected from the table ) Focus mode: AF / MF Adjust the focus confirmation point: 17 steps

Compact mechanical film camera for 35 mm, the camera has a transparent case, flash on/off, battery 2xAA(not included)

Mechanical vintage 35 mm film camera Kodak KB-12, The camera is equipped with a kodak aspheric lens. ✅ Free focus  ✅ There is a built-in flash on the front of the case. ✅ The camera independently determines the ISO sensitivity of the film 100-400 ✅ Powered by two AA batteries (not included).

Attention buyers from the USA! Delivery times from Ukraine to the USA are only 10-12 business days! I accept orders 24/7 I am a professional photographer and I myself use a dandelion chip on my lenses with my cameras more than 10 years! I have installed chips on more than 10,000 lenses and adapters! Only I sell with guarantee original dandelion chip for Nikon and Canon! If you bought from me and received my service, you will never buy a similar product from another seller! Only I give instructions and advice before and after the purchase! My service on Ebay is unique and the best. My store is available 24/7 for shopping. With this adapter, there is focusing on infinity with M42 lenses! First write me a message: what lens do you want to use with this adapter! I will give advice on using your lens with this adapter! The lens in this adapter is designed for lenses with an aperture of f2.0 If your lens has apertures from f1.0 to f1.9 - do not buy this adapter! You won't get sharpness in the photo! Dandelion chip - original, programmable, made in Europe. (M42-Nikon Adapter by Pixco) This adapter is made for installation M-42 mount manual lenses to Nikon F DSLR / film camera! I make a personal video clip to each buyer of the   adapter with chip, in this video clip I show completely programmed chip! all video recorded for buyers to look at my  YouTube channel  Andrey Kuryanov On this adapter installed programmable chip Nikon. ( Dandelion Lushnikov - made in Europe - not China!!! ) 1. You can control the lens aperture of the camera. You can select any aperture through your camera! 2. The chip can operate in aperture priority mode A. 3. The chip can operate in mode M, P, and other modes. 4. Chip allows you to select any point of focus. 5. The chip provides the focus confirmation sound and light signal, as the autofocus lens Nikon. 6. The chip will not take a picture until no focus confirmation! (AF trap) AF Chip "Dandelion" for Nikon Compatibility: There are only three film cameras that Dandelion is not compatible with: F4, F60 and F90x. It works with all other models perfectly.  Programming mode is not compatible with F5 and D1X/H models. Free tracking number !!! I do chip pictures and images of the chip packaging process to every buyer! Please give the following information: 1. The name of the lens or the adapter name,  such as  Helios 44-2 58mm/f 2-16 2. Write the name of your camera, such as Nikon D5100 You get a fully working chip!                                                1.  I make the free programming of each chip .                                                2. I give detailed instructions for installing the chip to the lens or adapter! 3. Chip can not be set on the lens with the aperture ratio of 1.2 When buying a chip select: 1. The name of the lens, such as  H elios 44-2 58mm/f 2-16 2. Attach a photo of your lens, made from the  bayonet  mount All the customers receive pictures made with programmed chip parameters and detailed instructions for use. After-sales support is free. The chip is very fragile! In case the customer uses the product improperly and the chip has been mechanically damaged the customer cannot bring claims against the seller. How to photograph with a dandelion chip on lenses without a diaphragm control lever 1. In the camera menu, you need to select the shooting mode AF-S 2. Select the aperture value in the camera 3. Select the same aperture value on the lens 4. Select the focus point (for example, center point) 5. Look at the viewfinder 6. You can fully press the shutter release button 7. Turn the focus ring 8. The camera shutter will work as soon as the subject of the shot is in focus. (This is how the focus trap works). 9. When the focus appears, you will hear the focus confirmation sound and see the focus confirmation light at the selected focus point. Dandelion (  programmable chip )  is designed to be installed on adapter rings and manual lenses so that they could then be used on Nikon AF digital and film cameras.  Because Dandelion is about the same size as a match, it can be fitted to any existing adapter ring or lens with Nikon F bayonet mount. Lenses with such bayonet mounts have been produced since 1959.  With Dandelion fixed on the ring, a camera obtains exposure metering function.  If your camera has a 3D matrix meter, it will function as well.  Precision focus will be acknowledged by a sound and light signal.  On the screen you will also find highlighted spots that got into focus area.  Junior series  digital cameras will provide an acknowledging beep.  With Dandelion installed on a lens with an automatic AI-S aperture,  the aperture will be  controlled through the camera similar to autofocus lenses. This is one of Nikon's  strongest points: you don't have to care about aperture when using an old manual lens.  Dandelion has another peculiar feature of "hard" shutter block before acknowledging  signal. When pressing shutter release button up to the stop, the shot is made  immediately in response to the signal. This is useful when shooting fast-moving  objects.  Dandelion's most important feature for eager photographers is the possibility to  change its parameters without taking it off the camera. You can alter focal length  and other parameters pre-set in Dandelion. See programming instructions.   

Bakelit LOMO UPB-1A LOMO UPB-1 Universsal Film Developing Tank Never used. Excellent condition.  The absolute classic among film developing tanks. Made in USSR, including all accessories.  Depending on availability, either 1a or 1 version will be delivered. Universal developing tank UPB-1A/UPB-1 is intended for processing of black and white and color films 8, 16 and 35 mm wide, up to 15m long by negative and circulation process. The universal tank coils/heilixes can be placed at different distances from each other. This allows the same photo tank to be used to process different film widths. Maximum film length: 30m film: 8mm or 16mm (2 x 15m), about 100 feet. You can load: - one 8mm film (15m); - one 16 mm film (15 m); - one 35 mm film (15 m); - two 8mm films (15m+15m); - two 16mm films (15m+15m); - one 8mm film and one 16mm film (15m+15m). _______________ _____________________________________ See my other items to save shipping costs.  Please note that delivery may be delayed due to COVID. Usual shipping time (with tracking) to EU 7-15 days, USA and Canada 9-25 days, other world 12-45 days. This is a used item and may have traces of usage.  Purchasing old/vintage/used equipment please make sure it is compatible with your new cameras, lenses etc. you are going to use it with.  Please note that the delivery takes place from aboard, therefore customs fees are possible. Import duties, taxes and charges are not included in the item price or shipping cost. These must be paid by the buyer depending on the destination country.  Questions have to be asked before the bid. All information in the listing are not binding and without guarantee. Errors, misprints and prior sale expressly reserved. If you have any issues with your purchase please contact me before leaving a feedback. I value my customers and all problems can be solved. Return Policy  If you are not satisfied for any reason with any item you have purchased, you can return it within 14 days after receiving it.  Please, make sure the item is packed and shipped it in the same condition you have received it.  Full refund will be issued after I receive the item back. Buyers have to pay for the return shipping, except for receiving wrong or defective items. In those cases I will cover your shipping expenses (applied only for economy international shipping services) If you received wrong or defective item, you will be eligible for discount next time you buy anything from my store! Just message to remind me! Please, do not leave a negative or neutral feedback for that.

 Unique poker cards made of wood     Limited deck of wooden poker cards. Collectible poker cards. Numbered playing poker cards. Art deco style playing cards. You will have great pleasure playing this deck of poker cards with your friends. Surprise your loved ones! Add our deck to your collection! Our workshop produced unique designer poker cards (54 cards) Standard size. Eco material (eco wood), 0.05 inch (1.4 mm) thick The cards are covered with water-soluble ecological varnish. The designs of pictures, card backs and numbers are laser engraved. The deck is completed in a handmade wooden box.   Chips are not included in the package!