-23%

Automatic LED Stair Lighting "SmartStairway SS-21"

Automatic LED Stair Lighting SmartStairway SS-21

$65.00
List price: $84.00
Email seller
Condition:

Automatic LED Stair Lighting "SmartStairway SS-21"

Kitinclude.jpg?1487238042394

The kit includes:

  1. SS-21 Controller - 1 piece.
  2. Motion sensor pyroelectric PIR SR501-1 ElBi - 2 pcs.
  3. Light sensor - 1 pc.
  4. User Manual - 1 piece.
XOPC NET UA
JZ466148
3 item(s)
+
Ukrainian Post - $10.00

The controller for the automatic stair lighting using low-power LED light sources. One controller is able to provide coverage from 4 to 21 degrees. The controllers have the ability to include a sequence that increases the possible number of steps, almost to infinity. The system provides a flexible configuration for any customer requirements. The controller can be used in conjunction with a light sensor, and without it, with the passage of switches simple pyroelectric (infrared) and digital sensors to ensure a smooth series of chain movement, when the signal from the sensors in the direction of movement of people included on the stairs, or with two sensors Veda count of people on the stairs, taking into account the number of people who entered and left, allowing the staircase as long as the people on the steps. The controller has a customizable interface and intuitive settings are available. Easy to install.


The controller is configured in a plastic housing which can be mounted on a DIN-rail or attached to the surface with screws or bolts. (See photo)

User Guide in English can be downloaded here shop.xopc.net.ua/files/pasport_ss_eng.pdf
Read the quick start shop.xopc.net.ua/files/quickstart.pdf



The main advantages of the system.

1. Small body size and easy mounting on DIN-rail as standard

built-in and external wiring of the box.

2. Digital Motion sensors in the standard wiring boxes.

3. The external light sensor allows you to choose the installation location with a constant light level does not depend on or off the staircase lighting or more light sources.

4. Simple and intuitive adjustment system.

5. Adjustable "light duty" first and last steps of the staircase.

6. Ability to connect through passage switch for lighting control at all times, regardless of lighting conditions.

7. Low power consumption.

8. Long service life of LED light sources (tape or radiators).

9. Easy to install and operate.

system algorithm

If the controller is used in sensor mode 2 (as defined in claim 7 settings), the algorithm is as follows. When the backlight is detected motion in the direction of human movement. Those. triggered by a sensor on the opposite. If in the process of moving, when he does not fully highlight the load sensor on the opposite side - rotated counter lights in the direction of movement of another person, logged-in stairs. After the staircase turns completely switched to standby timer (specified in the Settings menu to claim 5), after which the backlight turns off smoothly steps in the same order.


With the help of a light sensor.

The controller can be used as a light sensor and without it. When connecting the controller to the sensor light should enable its use (claim 1. Set up) or disabled if not used sensor. The sensor must be installed in such a place that it will not be reached by light of indoor lighting and lighting levels themselves. Digital sensor provides a logic controller port 0 when the lighting is not sufficient or logical unit if the light level is less than the set limit. When activated by illumination light operating conditions the first and last stages, and the controller is allowed to turn on the backlight levels for the signals from motion sensors according to the selected algorithm (see. Above). When driving on the stairs when the lights turn on, or suddenly steps onto the sensor light gets brighter threshold activation light controller - from stair lights and service levels, and the controller enters the standby mode. motion sensors work and treatment of people on the ladder rack is maintained even when the sensor light signal lights will not be realized.

Characteristics

1. The number of channels (the number of connected steps) minimum - 4 pcs.
maximum - 21 pcs.
2. DC supply voltage of 12 V.
3. Maximum load current per channel 1 (step 1) 0.4 A (4,8Vt)
4. Elements of the pyroelectric sensing
digital sensors,
Digital photo sensor
unpackaged.
5. Power Digital Sensor Input: DC 5V
6. Protection IP22
7. Ambient temperature -5 ... + 50`C
8. Controller Case Dimensions 115x90x41 mm
9. Consumption of power controller
Standby time (up to): 0,3W.
10. The controller power consumption under load (max): 3,5W.

11. The maximum allowable total load capacity (max): 58 watts.

No posts found

Write a review
Payment

I accept PayPal or Credit Cards only.
• Your items will be made and shipped only after the payment is cleared.
• If you don't have Paypal account and would like to pay with your Credit Card, check this step-by-step tutorial on PayPal:
https://www.paypal.com/webapps/mpp/pay-online

Your order will be shipped only after the payment is cleared. This means if you pay via Paypal e-checks there could be delay in 3-5 business days. You can check the status of your payment in your Paypal account or in the correspond invoice here on Lavky.

Shipping

All items will be carefully packaged and sent within 1-3 business days after payment is received!
(Some items may need more time. If processing time is more than 7 days - you will find it in item description )

Shipping address:
• Please make sure your shipping address is correct during the checkout. I will send your package to this address and not the Paypal one.

Terms & Delivery time:
• Shipping usually takes about 2-4 weeks.

Please note, transit time may vary depending on your location and customs processing, so I can’t guarantee exact arrival time.
Here are approximate terms of shipping:
- USA: 1,5 - 2,5 weeks
- Canada: 2-3 weeks
- Australia: 2-3 weeks (sometimes longer, depending on work of Australian custom)
- Europe: 1-2 weeks
- Rest of World: 2-3 weeks

Shipping method:
• All packages are sent via international registered airmail from Kyiv, Ukraine.
It includes tracking number (it will be sent in e-mail notification). Each package has delivery confirmation.
Please note: some local postal services do not provide on-line tracking for international registered airmail. Such as: USA, Germany, UK, France, Italy and Australian post. So I can track your package only while it's in Ukraine.

• Express shipping via EMS is available upon request. Please contact me if you need it before placing an order, so we can adjust shipping prices.

Custom Fees and Duties

• Customers are responsible for any fees, taxes, and duties associated with shipping & purchasing to their respective countries.

Packaging:

• Your order will come in safe cardboard box

Refunds and Exchanges

I want my clients to be happy, so report me if you have any problems.

If you are not satisfied with your items / service for any reason, please contact me with the problem before leaving a feedback.

Additional Policies and FAQs

Feel free to contact me with any questions.

cs-cart licences, cs-cart add-ons